LiveActive security incident?Get immediate response
CVE archive

January 2026

Browse CVE records published in January 2026, with severity, affected products, CWE, KEV, and source-backed vulnerability context.

Showing 50 of 1838 matching CVEs · Page 31 of 37.

Low · CVSS 2.9

CVE-2026-22782: RustFS RPC signature verification logs shared secret

RustFS is a distributed object storage system built in Rust. From >= 1.0.0-alpha.1 to 1.0.0-alpha.79, invalid RPC signatures cause the server to log the shared HMAC secret (and expected signature), which exposes the secret to log readers and enables forged RPC calls. In crates/ecstore/src/rpc/http_auth.rs, the invalid signature branch logs sensitive data. This log line includes secret and expected_signature, both derived from the shared HMAC key. Any invalidly signed request triggers this path. The function is reachable from RPC and admin request handlers. This vulnerability is fixed in 1.0.0-alpha.80.

Published Jan 16, 2026 · Updated Jan 16, 2026

High · CVSS 8.7

CVE-2026-21905: Junos OS: SRX Series, MX Series with MX-SPC3 or MS-MPC: Receipt of multiple specific SIP messages results in flow management process crash

A Loop with Unreachable Exit Condition ('Infinite Loop') vulnerability in the SIP application layer gateway (ALG) of Juniper Networks Junos OS on SRX Series and MX Series with MX-SPC3 or MS-MPC allows an unauthenticated network-based attacker sending specific SIP messages over TCP to crash the flow management process, leading to a Denial of Service (DoS). On SRX Series, and MX Series with MX-SPC3 or MS-MPC service cards, receipt of multiple SIP messages causes the SIP headers to be parsed incorrectly, eventually causing a continuous loop and leading to a watchdog timer expiration, crashing the flowd process on SRX Series and MX Series with MX-SPC3, or mspmand process on MX Series with MS-MPC. This issue only occurs over TCP. SIP messages sent over UDP cannot trigger this issue. This issue affects Junos OS on SRX Series and MX Series with MX-SPC3 and MS-MPC: * all versions before 21.2R3-S10,  * from 21.4 before 21.4R3-S12,  * from 22.4 before 22.4R3-S8,  * from 23.2 before 23.2R2-S5,  * from 23.4 before 23.4R2-S6,  * from 24.2 before 24.2R2-S3,  * from 24.4 before 24.4R2-S1,  * from 25.2 before 25.2R1-S1, 25.2R2.

Published Jan 15, 2026 · Updated Jan 16, 2026

High · CVSS 8.7

CVE-2026-21906: Junos OS: SRX Series: With GRE performance acceleration enabled, receipt of a specific ICMP packet causes the PFE to crash

An Improper Handling of Exceptional Conditions vulnerability in the packet forwarding engine (PFE) of Juniper Networks Junos OS on SRX Series allows an unauthenticated network-based attacker sending a specific ICMP packet through a GRE tunnel to cause the PFE to crash and restart. When PowerMode IPsec (PMI) and GRE performance acceleration are enabled and the device receives a specific ICMP packet, a crash occurs in the SRX PFE, resulting in traffic loss. PMI is enabled by default, and GRE performance acceleration can be enabled by running the configuration command shown below. PMI is a mode of operation that provides IPsec performance improvements using Vector Packet Processing. Note that PMI with GRE performance acceleration is only supported on specific SRX platforms. This issue affects Junos OS on the SRX Series: * all versions before 21.4R3-S12,  * from 22.4 before 22.4R3-S8,  * from 23.2 before 23.2R2-S5,  * from 23.4 before 23.4R2-S5,  * from 24.2 before 24.2R2-S3,  * from 24.4 before 24.4R2-S1,  * from 25.2 before 25.2R1-S1, 25.2R2.

Published Jan 15, 2026 · Updated Jan 16, 2026

High · CVSS 7.3

CVE-2026-0615: CVE-2026-0615

The Librarian `supervisord` status page can be retrieved by the `web_fetch` tool, which can be used to retrieve running processes within TheLibrarian backend. The vendor has fixed the vulnerability in all affected versions.

Published Jan 16, 2026 · Updated Jan 16, 2026

Medium · CVSS 6.1

CVE-2026-0858: Versions of the package net.sourceforge.plantuml:plantuml before 1.2026.0 are vulnerable to Stored XSS due...

Versions of the package net.sourceforge.plantuml:plantuml before 1.2026.0 are vulnerable to Stored XSS due to insufficient sanitization of interactive attributes in GraphViz diagrams. As a result, a crafted PlantUML diagram can inject malicious JavaScript into generated SVG output, leading to arbitrary script execution in the context of applications that render the SVG.

Published Jan 16, 2026 · Updated Jan 16, 2026

Medium · CVSS 4.8

CVE-2026-20894: Cross-site scripting vulnerability exists in multiple Network Cameras TRIFORA 3 series provided by TOA Corp...

Cross-site scripting vulnerability exists in multiple Network Cameras TRIFORA 3 series provided by TOA Corporation. If an attacking administrator configures the affected product with some malicious input, an arbitrary script may be executed on the web browser of a victim administrator who accesses the setting screen.

Published Jan 16, 2026 · Updated Jan 16, 2026

High · CVSS 8.8

CVE-2026-0855: Merit LILIN|IP Camera - OS Command Injection

Certain IP Camera models developed by Merit LILIN has a OS Command Injection vulnerability, allowing authenticated remote attackers to inject arbitrary OS commands and execute them on the device.

Published Jan 12, 2026 · Updated Jan 16, 2026

High · CVSS 7.4

CVE-2026-23622: CSRF Protection Bypass: Sensitive endpoints accept GET requests, enabling admin account takeover

Easy!Appointments is a self hosted appointment scheduler. In 1.5.2 and earlier, application/core/EA_Security.php::csrf_verify() only enforces CSRF for POST requests and returns early for non-POST methods. Several application endpoints perform state-changing operations while accepting parameters from GET (or $_REQUEST), so an attacker can perform CSRF by forcing a victim's browser to issue a crafted GET request. Impact: creation of admin accounts, modification of admin email/password, and full admin account takeover.

Published Jan 15, 2026 · Updated Jan 15, 2026

High · CVSS 8.7

CVE-2026-21918: Junos OS: SRX and MX Series: When TCP packets occur in a specific sequence flowd crashes

A Double Free vulnerability in the flow processing daemon (flowd) of Juniper Networks Junos OS on SRX and MX Series allows an unauthenticated, network-based attacker to cause a Denial-of-Service (DoS). On all SRX and MX Series platforms, when during TCP session establishment a specific sequence of packets is encountered a double free happens. This causes flowd to crash and the respective FPC to restart. This issue affects Junos OS on SRX and MX Series: * all versions before 22.4R3-S7, * 23.2 versions before 23.2R2-S3, * 23.4 versions before 23.4R2-S4, * 24.2 versions before 24.2R2.

Published Jan 15, 2026 · Updated Jan 15, 2026

High · CVSS 8.7

CVE-2026-21917: Junos OS: SRX Series: Specifically malformed SSL packet causes FPC crash

An Improper Validation of Syntactic Correctness of Input vulnerability in the Web-Filtering module of Juniper Networks Junos OS on SRX Series allows an unauthenticated, network-based attacker to cause a Denial-of-Service (DoS). If an SRX device configured for UTM Web-Filtering receives a specifically malformed SSL packet, this will cause an FPC crash and restart. This issue affects Junos OS on SRX Series: * 23.2 versions from 23.2R2-S2 before 23.2R2-S5,  * 23.4 versions from 23.4R2-S1 before 23.4R2-S5, * 24.2 versions before 24.2R2-S2, * 24.4 versions before 24.4R1-S3, 24.4R2. Earlier versions of Junos are also affected, but no fix is available.

Published Jan 15, 2026 · Updated Jan 15, 2026

High · CVSS 8.2

CVE-2026-21907: Junos Space: TLS/SSL server supports use of static key ciphers (ssl-static-key-ciphers)

A Use of a Broken or Risky Cryptographic Algorithm vulnerability in the TLS/SSL server of Juniper Networks Junos Space allows the use of static key ciphers (ssl-static-key-ciphers), reducing the confidentiality of on-path traffic communicated across the connection. These ciphers also do not support Perfect Forward Secrecy (PFS), affecting the long-term confidentiality of encrypted communications.This issue affects all versions of Junos Space before 24.1R5.

Published Jan 15, 2026 · Updated Jan 15, 2026

High · CVSS 7.1

CVE-2026-21903: Junos OS: Subscribing to telemetry sensors at scale causes all FPCs to crash

A Stack-based Buffer Overflow vulnerability in the Packet Forwarding Engine (pfe) of Juniper Networks Junos OS allows a network-based attacker, authenticated with low privileges to cause a Denial-of-Service (DoS). Subscribing to telemetry sensors at scale causes all FPC connections to drop, resulting in an FPC crash and restart. The issue was not seen when YANG packages for the specific sensors were installed. This issue affects Junos OS:  * all versions before 22.4R3-S7, * 23.2 version before 23.2R2-S4, * 23.4 versions before 23.4R2.

Published Jan 15, 2026 · Updated Jan 15, 2026

Medium · CVSS 6.9

CVE-2026-1002: Eclipse Vert.x Web static handler file access denial

The Vert.x Web static handler component cache can be manipulated to deny the access to static files served by the handler using specifically crafted request URI. The issue comes from an improper implementation of the C. rule of section 5.2.4 of RFC3986 and is fixed in Vert.x Core component (used by Vert.x Web): https://github.com/eclipse-vertx/vert.x/pull/5895 Steps to reproduce Given a file served by the static handler, craft an URI that introduces a string like bar%2F..%2F after the last / char to deny the access to the URI with an HTTP 404 response. For example https://example.com/foo/index.html can be denied with https://example.com/foo/bar%2F..%2Findex.html Mitgation Disabling Static Handler cache fixes the issue. StaticHandler staticHandler = StaticHandler.create().setCachingEnabled(false);

Published Jan 15, 2026 · Updated Jan 15, 2026

High · CVSS 8.7

CVE-2026-21920: Junos OS: SRX Series: If a specific request is processed by the DNS subsystem flowd will crash

An Unchecked Return Value vulnerability in the DNS module of Juniper Networks Junos OS on SRX Series allows an unauthenticated, network-based attacker to cause a Denial-of-Service (DoS). If an SRX Series device configured for DNS processing, receives a specifically formatted DNS request flowd will crash and restart, which causes a service interruption until the process has recovered. This issue affects Junos OS on SRX Series: * 23.4 versions before 23.4R2-S5, * 24.2 versions before 24.2R2-S1, * 24.4 versions before 24.4R2. This issue does not affect Junos OS versions before 23.4R1.

Published Jan 15, 2026 · Updated Jan 15, 2026

High · CVSS 7.1

CVE-2026-21921: Junos OS and Junos OS Evolved: When telemetry collectors are frequently subscribing and unsubscribing to sensors chassisd or rpd will crash

A Use After Free vulnerability in the chassis daemon (chassisd) of Juniper Networks Junos OS and Junos OS Evolved allows a network-based attacker authenticated with low privileges to cause a Denial-of-Service (DoS). When telemetry collectors are frequently subscribing and unsubscribing to sensors continuously over a long period of time, telemetry-capable processes like chassisd, rpd or mib2d will crash and restart, which - depending on the process - can cause a complete outage until the system has recovered. This issue affects:  Junos OS:  * all versions before 22.4R3-S8, * 23.2 versions before 23.2R2-S5, * 23.4 versions before 23.4R2; Junos OS Evolved: * all versions before 22.4R3-S8-EVO, * 23.2 versions before 23.2R2-S5-EVO, * 23.4 versions before 23.4R2-EVO.

Published Jan 15, 2026 · Updated Jan 15, 2026

High · CVSS 7.1

CVE-2026-21909: Junos OS and Junos OS Evolved: Receipt of specific IS-IS update packet causes memory leak leading to RPD crash

A Missing Release of Memory after Effective Lifetime vulnerability in the routing protocol daemon (rpd) Juniper Networks Junos OS and Junos OS Evolved allows an unauthenticated attacker controlling an adjacent IS-IS neighbor to send a specific update packet causing a memory leak. Continued receipt and processing of these packets will exhaust all available memory, crashing rpd and creating a Denial of Service (DoS) condition. Memory usage can be monitored through the use of the 'show task memory detail' command. For example: user@junos> show task memory detail | match ted-infra   TED-INFRA-COOKIE           25   1072     28   1184     229 user@junos> show task memory detail | match ted-infra   TED-INFRA-COOKIE           31   1360     34   1472     307 This issue affects: Junos OS:  * from 23.2 before 23.2R2,  * from 23.4 before 23.4R1-S2, 23.4R2,  * from 24.1 before 24.1R2;  Junos OS Evolved:  * from 23.2 before 23.2R2-EVO,  * from 23.4 before 23.4R1-S2-EVO, 23.4R2-EVO,  * from 24.1 before 24.1R2-EVO. This issue does not affect Junos OS versions before 23.2R1 or Junos OS Evolved versions before 23.2R1-EVO.

Published Jan 15, 2026 · Updated Jan 15, 2026

High · CVSS 7.1

CVE-2026-21910: Junos OS: EX4k Series, QFX5k Series: In an EVPN-VXLAN configuration link flaps cause Inter-VNI traffic drop

An Improper Check for Unusual or Exceptional Conditions vulnerability in the packet forwarding engine (PFE) of Juniper Networks Junos OS on EX4k Series and QFX5k Series platforms allows an unauthenticated network-adjacent attacker flapping an interface to cause traffic between VXLAN Network Identifiers (VNIs) to drop, leading to a Denial of Service (DoS). On all EX4k and QFX5k platforms, a link flap in an EVPN-VXLAN configuration Link Aggregation Group (LAG) results in Inter-VNI traffic dropping when there are multiple load-balanced next-hop routes for the same destination. This issue is only applicable to systems that support EVPN-VXLAN Virtual Port-Link Aggregation Groups (VPLAG), such as the QFX5110, QFX5120, QFX5200, EX4100, EX4300, EX4400, and EX4650. Service can only be restored by restarting the affected FPC via the 'request chassis fpc restart slot <slot-number>' command. This issue affects Junos OS on EX4k and QFX5k Series:  * all versions before 21.4R3-S12,  * all versions of 22.2 * from 22.4 before 22.4R3-S8,  * from 23.2 before 23.2R2-S5,  * from 23.4 before 23.4R2-S5,  * from 24.2 before 24.2R2-S3, * from 24.4 before 24.4R2.

Published Jan 15, 2026 · Updated Jan 15, 2026

High · CVSS 7.1

CVE-2026-21911: Junos OS Evolved: Flapping management interface causes MAC learning on label-switched interfaces to stop

An Incorrect Calculation vulnerability in the Layer 2 Control Protocol Daemon (l2cpd) of Juniper Networks Junos OS Evolved allows an unauthenticated network-adjacent attacker flapping the management interface to cause the learning of new MACs over label-switched interfaces (LSI) to stop while generating a flood of logs, resulting in high CPU usage. When the issue is seen, the following log message will be generated: op:1 flag:0x6 mac:xx:xx:xx:xx:xx:xx bd:2 ifl:13302 reason:0(REASON_NONE) i-op:6(INTRNL_OP_HW_FORCE_DELETE) status:10 lstatus:10 err:26(GETIFBD_VALIDATE_FAILED) err-reason 4(IFBD_VALIDATE_FAIL_EPOCH_MISMATCH) hw_wr:0x4 ctxsync:0 fwdsync:0 rtt-id:51 p_ifl:0 fwd_nh:0 svlbnh:0 event:- smask:0x100000000 dmask:0x0 mplsmask 0x1 act:0x5800 extf:0x0 pfe-id 0 hw-notif-ifl 13302 programmed-ifl 4294967295 pseudo-vtep underlay-ifl-idx 0 stack:GET_MAC, ALLOCATE_MAC, GET_IFL, GET_IFF, GET_IFBD, STOP, This issue affects Junos OS Evolved:  * all versions before 21.4R3-S7-EVO,  * from 22.2 before 22.2R3-S4-EVO,  * from 22.3 before 22.3R3-S3-EVO,  * from 22.4 before 22.4R3-S2-EVO,  * from 23.2 before 23.2R2-S1-EVO,  * from 23.4 before 23.4R1-S2-EVO, 23.4R2-EVO.

Published Jan 15, 2026 · Updated Jan 15, 2026

Medium · CVSS 6.8

CVE-2026-21912: Junos OS: MX10k Series: 'show system firmware' CLI command may lead to LC480 or LC2101 line card reset

A Time-of-check Time-of-use (TOCTOU) Race Condition vulnerability in the method to collect FPC Ethernet firmware statistics of Juniper Networks Junos OS on MX10k Series allows a local, low-privileged attacker executing the 'show system firmware' CLI command to cause an LC480 or LC2101 line card to reset. On MX10k Series systems with LC480 or LC2101 line cards, repeated execution of the 'show system firmware' CLI command can cause the line card to crash and restart. Additionally, some time after the line card crashes, chassisd may also crash and restart, generating a core dump.This issue affects Junos OS on MX10k Series:  * all versions before 21.2R3-S10,  * from 21.4 before 21.4R3-S9,  * from 22.2 before 22.2R3-S7,  * from 22.4 before 22.4R3-S6,  * from 23.2 before 23.2R2-S2,  * from 23.4 before 23.4R2-S3,  * from 24.2 before 24.2R2.

Published Jan 15, 2026 · Updated Jan 15, 2026

High · CVSS 8.7

CVE-2026-21913: Junos OS: EX4000: A high volume of traffic destined to the device leads to a crash and restart

An Incorrect Initialization of Resource vulnerability in the Internal Device Manager (IDM) of Juniper Networks Junos OS on EX4000 models allows an unauthenticated, network-based attacker to cause a Denial-of-Service (DoS). On EX4000 models with 48 ports (EX4000-48T, EX4000-48P, EX4000-48MP) a high volume of traffic destined to the device will cause an FXPC crash and restart, which leads to a complete service outage until the device has automatically restarted. The following reboot reason can be seen in the output of 'show chassis routing-engine' and as a log message:   reason=0x4000002 reason_string=0x4000002:watchdog + panic with core dump This issue affects Junos OS on EX4000-48T, EX4000-48P and EX4000-48MP: * 24.4 versions before 24.4R2, * 25.2 versions before 25.2R1-S2, 25.2R2. This issue does not affect versions before 24.4R1 as the first Junos OS version for the EX4000 models was 24.4R1.

Published Jan 15, 2026 · Updated Jan 15, 2026

High · CVSS 8.7

CVE-2026-21914: Junos OS: SRX Series: A specifically malformed GTP message will cause an FPC crash

An Improper Locking vulnerability in the GTP plugin of Juniper Networks Junos OS on SRX Series allows an unauthenticated, network-based attacker to cause a Denial-of-Service (Dos). If an SRX Series device receives a specifically malformed GPRS Tunnelling Protocol (GTP) Modify Bearer Request message, a lock is acquired and never released. This results in other threads not being able to acquire a lock themselves, causing a watchdog timeout leading to FPC crash and restart. This issue leads to a complete traffic outage until the device has automatically recovered. This issue affects Junos OS on SRX Series: * all versions before 22.4R3-S8, * 23.2 versions before 23.2R2-S5, * 23.4 versions before 23.4R2-S6, * 24.2 versions before 24.2R2-S3, * 24.4 versions before 24.4R2-S2, * 25.2 versions before 25.2R1-S1, 25.2R2.

Published Jan 15, 2026 · Updated Jan 15, 2026

Critical · CVSS 9.1

CVE-2026-23520: Arcane has a Command Injection in Arcane Updater Lifecycle Labels Enables RCE

Arcane provides modern docker management. Prior to 1.13.0, Arcane has a command injection in the updater service. Arcane’s updater service supported lifecycle labels com.getarcaneapp.arcane.lifecycle.pre-update and com.getarcaneapp.arcane.lifecycle.post-update that allowed defining a command to run before or after a container update. The label value is passed directly to /bin/sh -c without sanitization or validation. Because any authenticated user (not limited to administrators) can create projects through the API, an attacker can create a project that specifies one of these lifecycle labels with a malicious command. When an administrator later triggers a container update (either manually or via scheduled update checks), Arcane reads the lifecycle label and executes its value as a shell command inside the container. This vulnerability is fixed in 1.13.0.

Published Jan 15, 2026 · Updated Jan 15, 2026

High · CVSS 8.9

CVE-2026-23519: RustCrypto cmov: thumbv6m-none-eabi compiler emits non-constant time assembly when using cmovnz

RustCrypto CMOV provides conditional move CPU intrinsics which are guaranteed on major platforms to execute in constant-time and not be rewritten as branches by the compiler. Prior to 0.4.4, the thumbv6m-none-eabi (Cortex M0, M0+ and M1) compiler emits non-constant time assembly when using cmovnz (portable version). This vulnerability is fixed in 0.4.4.

Published Jan 15, 2026 · Updated Jan 15, 2026

Medium · CVSS 5.3

CVE-2026-23511: ZITADEL has a user enumeration vulnerability in Login UIs

ZITADEL is an open source identity management platform. Prior to 4.9.1 and 3.4.6, a user enumeration vulnerability has been discovered in Zitadel's login interfaces. An unauthenticated attacker can exploit this flaw to confirm the existence of valid user accounts by iterating through usernames and userIDs. This vulnerability is fixed in 4.9.1 and 3.4.6.

Published Jan 15, 2026 · Updated Jan 15, 2026

High · CVSS 7.1

CVE-2026-22249: Docmost affected by an Arbitrary File Write via Zip Import Feature (ZipSlip)

Docmost is an open-source collaborative wiki and documentation software. From 0.21.0 to before 0.24.0, Docmost is vulnerable to Arbitrary File Write via Zip Import Feature (ZipSlip). In apps/server/src/integrations/import/utils/file.utils.ts, there are no validation on filename. This vulnerability is fixed in 0.24.0.

Published Jan 15, 2026 · Updated Jan 15, 2026

High · CVSS 8.2

CVE-2026-22803: SvelteKit has a memory amplification DoS in Remote Functions binary form deserializer

SvelteKit is a framework for rapidly developing robust, performant web applications using Svelte. From 2.49.0 to 2.49.4, the experimental form remote function uses a binary data format containing a representation of submitted form data. A specially-crafted payload can cause the server to allocate a large amount of memory, causing DoS via memory exhaustion. This vulnerability is fixed in 2.49.5.

Published Jan 15, 2026 · Updated Jan 15, 2026

High · CVSS 8.6

CVE-2026-23493: Pimcore ENV Variables and Cookie Informations are exposed in http_error_log

Pimcore is an Open Source Data & Experience Management Platform. Prior to 12.3.1 and 11.5.14, the http_error_log file stores the $_COOKIE and $_SERVER variables, which means sensitive information such as database passwords, cookie session data, and other details can be accessed or recovered through the Pimcore backend. This vulnerability is fixed in 12.3.1 and 11.5.14.

Published Jan 15, 2026 · Updated Jan 15, 2026

Medium · CVSS 5.4

CVE-2026-23496: Pimcore Web2Print Tools Bundle "Favourite Output Channel Configuration" Missing Function Level Authorization

Pimcore Web2Print Tools Bundle adds tools for web-to-print use cases to Pimcore. Prior to 5.2.2 and 6.1.1, the application fails to enforce proper server-side authorization checks on the API endpoint responsible for managing "Favourite Output Channel Configurations." Testing revealed that an authenticated backend user without explicitely lacking permissions for this feature was still able to successfully invoke the endpoint and modify or retrieve these configurations. This vulnerability is fixed in 5.2.2 and 6.1.1.

Published Jan 15, 2026 · Updated Jan 15, 2026

Medium · CVSS 4.8

CVE-2026-20075: Cisco Evolved Programmable Network Manager and Cisco Prime Infrastructure Stored Cross-Site Scripting Vulnerability

A vulnerability in the web-based management interface of Cisco Evolved Programmable Network Manager (EPNM) and Cisco Prime Infrastructure could allow an authenticated, remote attacker to conduct a stored cross-site scripting (XSS) attack against users of the interface of an affected system. This vulnerability exists because the web-based management interface does not properly validate user-supplied input. An attacker could exploit this vulnerability by inserting malicious code into specific data fields in the interface. A successful exploit could allow the attacker to execute arbitrary script code in the context of the affected interface or access sensitive, browser-based information. To exploit this vulnerability, an attacker must have valid administrative credentials.

Published Jan 15, 2026 · Updated Jan 15, 2026

Medium · CVSS 4.3

CVE-2026-23494: Pimcore is Missing Function Level Authorization on "Static Routes" Listing

Pimcore is an Open Source Data & Experience Management Platform. Prior to 12.3.1 and 11.5.14, the application fails to enforce proper server-side authorization checks on the API endpoint responsible for reading or listing static routes. In Pimcore, static routes are custom URL patterns defined via the backend interface or the var/config/staticroutes.php file, including details like regex-based patterns, controllers, variables, and priorities. These routes are registered automatically through the PimcoreStaticRoutesBundle and integrated into the MVC routing system. Testing revealed that an authenticated backend user lacking explicit permissions was able to invoke the endpoint (e.g., GET /api/static-routes) and retrieve sensitive route configurations. This vulnerability is fixed in 12.3.1 and 11.5.14.

Published Jan 15, 2026 · Updated Jan 15, 2026

Medium · CVSS 4.3

CVE-2026-23495: Pimcore's Admin Classic Bundle is Missing Function Level Authorization on "Predefined Properties" Listing

Pimcore's Admin Classic Bundle provides a Backend UI for Pimcore. Prior to 2.2.3 and 1.7.16, the API endpoint for listing Predefined Properties in the Pimcore platform lacks adequate server-side authorization checks. Predefined Properties are configurable metadata definitions (e.g., name, key, type, default value) used across documents, assets, and objects to standardize custom attributes and improve editorial workflows, as documented in Pimcore's official properties guide. Testing confirmed that an authenticated backend user without explicit permissions for property management could successfully call the endpoint and retrieve the complete list of these configurations. The vulnerability is fixed in 2.2.3 and 1.7.16.

Published Jan 15, 2026 · Updated Jan 15, 2026

High · CVSS 8.7

CVE-2026-22867: LaSuite Doc affected by Stored XSS via Interlinking Block

LaSuite Doc is a collaborative note taking, wiki and documentation platform. From 3.8.0 to 4.3.0, a Stored Cross-Site Scripting (XSS) vulnerability exists in the Interlinking feature. When a user creates a link to another document within the editor, the URL of that link is not validated. An attacker with document editing privileges can inject a malicious javascript: URL that executes arbitrary code when other users click on the link. This vulnerability is fixed in 4.4.0.

Published Jan 15, 2026 · Updated Jan 15, 2026

High · CVSS 7.5

CVE-2026-22265: Roxy-WI has a Command Injection via grep parameter in logs.py allows authenticated RCE

Roxy-WI is a web interface for managing Haproxy, Nginx, Apache and Keepalived servers. Prior to 8.2.8.2, command injection vulnerability exists in the log viewing functionality that allows authenticated users to execute arbitrary system commands. The vulnerability is in app/modules/roxywi/logs.py line 87, where the grep parameter is used twice - once sanitized and once raw. This vulnerability is fixed in 8.2.8.2.

Published Jan 15, 2026 · Updated Jan 15, 2026