High · CVSS 7.5
In the Linux kernel, the following vulnerability has been resolved:
wifi: rtw89: pci: validate sequence number of TX release report
Hardware rarely reports abnormal sequence number in TX release report,
which will access out-of-bounds of wd_ring->pages array, causing NULL
pointer dereference.
BUG: kernel NULL pointer dereference, address: 0000000000000000
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 0 P4D 0
Oops: 0000 [#1] PREEMPT SMP NOPTI
CPU: 1 PID: 1085 Comm: irq/129-rtw89_p Tainted: G S U
6.1.145-17510-g2f3369c91536 #1 (HASH:69e8 1)
Call Trace:
<IRQ>
rtw89_pci_release_tx+0x18f/0x300 [rtw89_pci (HASH:4c83 2)]
rtw89_pci_napi_poll+0xc2/0x190 [rtw89_pci (HASH:4c83 2)]
net_rx_action+0xfc/0x460 net/core/dev.c:6578 net/core/dev.c:6645 net/core/dev.c:6759
handle_softirqs+0xbe/0x290 kernel/softirq.c:601
? rtw89_pci_interrupt_threadfn+0xc5/0x350 [rtw89_pci (HASH:4c83 2)]
__local_bh_enable_ip+0xeb/0x120 kernel/softirq.c:499 kernel/softirq.c:423
</IRQ>
<TASK>
rtw89_pci_interrupt_threadfn+0xf8/0x350 [rtw89_pci (HASH:4c83 2)]
? irq_thread+0xa7/0x340 kernel/irq/manage.c:0
irq_thread+0x177/0x340 kernel/irq/manage.c:1205 kernel/irq/manage.c:1314
? thaw_kernel_threads+0xb0/0xb0 kernel/irq/manage.c:1202
? irq_forced_thread_fn+0x80/0x80 kernel/irq/manage.c:1220
kthread+0xea/0x110 kernel/kthread.c:376
? synchronize_irq+0x1a0/0x1a0 kernel/irq/manage.c:1287
? kthread_associate_blkcg+0x80/0x80 kernel/kthread.c:331
ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:295
</TASK>
To prevent crash, validate rpp_info.seq before using.
Published May 6, 2026 · Updated Aug 5, 2026
High · CVSS 7.8
In the Linux kernel, the following vulnerability has been resolved:
LoongArch: Make cpumask_of_node() robust against NUMA_NO_NODE
The arch definition of cpumask_of_node() cannot handle NUMA_NO_NODE -
which is a valid index - so add a check for this.
Published May 6, 2026 · Updated Aug 5, 2026
High · CVSS 7.8
In the Linux kernel, the following vulnerability has been resolved:
PCI: Fix pci_slot_trylock() error handling
Commit a4e772898f8b ("PCI: Add missing bridge lock to pci_bus_lock()")
delegates the bridge device's pci_dev_trylock() to pci_bus_trylock() in
pci_slot_trylock(), but it forgets to remove the corresponding
pci_dev_unlock() when pci_bus_trylock() fails.
Before a4e772898f8b, the code did:
if (!pci_dev_trylock(dev)) /* <- lock bridge device */
goto unlock;
if (dev->subordinate) {
if (!pci_bus_trylock(dev->subordinate)) {
pci_dev_unlock(dev); /* <- unlock bridge device */
goto unlock;
}
}
After a4e772898f8b the bridge-device lock is no longer taken, but the
pci_dev_unlock(dev) on the failure path was left in place, leading to the
bug.
This yields one of two errors:
1. A warning that the lock is being unlocked when no one holds it.
2. An incorrect unlock of a lock that belongs to another thread.
Fix it by removing the now-redundant pci_dev_unlock(dev) on the failure
path.
[Same patch later posted by Keith at
https://patch.msgid.link/20260116184150.3013258-1-kbusch@meta.com]
Published May 6, 2026 · Updated Aug 5, 2026
Critical · CVSS 9.8
In the Linux kernel, the following vulnerability has been resolved:
net: do not pass flow_id to set_rps_cpu()
Blamed commit made the assumption that the RPS table for each receive
queue would have the same size, and that it would not change.
Compute flow_id in set_rps_cpu(), do not assume we can use the value
computed by get_rps_cpu(). Otherwise we risk out-of-bound access
and/or crashes.
Published May 6, 2026 · Updated Aug 5, 2026
High · CVSS 7.8
In the Linux kernel, the following vulnerability has been resolved:
media: mtk-mdp: Fix error handling in probe function
Add mtk_mdp_unregister_m2m_device() on the error handling path to prevent
resource leak.
Add check for the return value of vpu_get_plat_device() to prevent null
pointer dereference. And vpu_get_plat_device() increases the reference
count of the returned platform device. Add platform_device_put() to
prevent reference leak.
Published May 6, 2026 · Updated Aug 5, 2026
High · CVSS 7.8
In the Linux kernel, the following vulnerability has been resolved:
drm/amdkfd: Fix out-of-bounds write in kfd_event_page_set()
The kfd_event_page_set() function writes KFD_SIGNAL_EVENT_LIMIT * 8
bytes via memset without checking the buffer size parameter. This allows
unprivileged userspace to trigger an out-of bounds kernel memory write
by passing a small buffer, leading to potential privilege
escalation.
Published May 6, 2026 · Updated Aug 5, 2026
High · CVSS 7.5
In the Linux kernel, the following vulnerability has been resolved:
atm: fore200e: fix use-after-free in tasklets during device removal
When the PCA-200E or SBA-200E adapter is being detached, the fore200e
is deallocated. However, the tx_tasklet or rx_tasklet may still be running
or pending, leading to use-after-free bug when the already freed fore200e
is accessed again in fore200e_tx_tasklet() or fore200e_rx_tasklet().
One of the race conditions can occur as follows:
CPU 0 (cleanup) | CPU 1 (tasklet)
fore200e_pca_remove_one() | fore200e_interrupt()
fore200e_shutdown() | tasklet_schedule()
kfree(fore200e) | fore200e_tx_tasklet()
| fore200e-> // UAF
Fix this by ensuring tx_tasklet or rx_tasklet is properly canceled before
the fore200e is released. Add tasklet_kill() in fore200e_shutdown() to
synchronize with any pending or running tasklets. Moreover, since
fore200e_reset() could prevent further interrupts or data transfers,
the tasklet_kill() should be placed after fore200e_reset() to prevent
the tasklet from being rescheduled in fore200e_interrupt(). Finally,
it only needs to do tasklet_kill() when the fore200e state is greater
than or equal to FORE200E_STATE_IRQ, since tasklets are uninitialized
in earlier states. In a word, the tasklet_kill() should be placed in
the FORE200E_STATE_IRQ branch within the switch...case structure.
This bug was identified through static analysis.
Published May 6, 2026 · Updated Aug 5, 2026
High · CVSS 7.5
In the Linux kernel, the following vulnerability has been resolved:
net/mlx5e: Fix "scheduling while atomic" in IPsec MAC address query
Fix a "scheduling while atomic" bug in mlx5e_ipsec_init_macs() by
replacing mlx5_query_mac_address() with ether_addr_copy() to get the
local MAC address directly from netdev->dev_addr.
The issue occurs because mlx5_query_mac_address() queries the hardware
which involves mlx5_cmd_exec() that can sleep, but it is called from
the mlx5e_ipsec_handle_event workqueue which runs in atomic context.
The MAC address is already available in netdev->dev_addr, so no need
to query hardware. This avoids the sleeping call and resolves the bug.
Call trace:
BUG: scheduling while atomic: kworker/u112:2/69344/0x00000200
__schedule+0x7ab/0xa20
schedule+0x1c/0xb0
schedule_timeout+0x6e/0xf0
__wait_for_common+0x91/0x1b0
cmd_exec+0xa85/0xff0 [mlx5_core]
mlx5_cmd_exec+0x1f/0x50 [mlx5_core]
mlx5_query_nic_vport_mac_address+0x7b/0xd0 [mlx5_core]
mlx5_query_mac_address+0x19/0x30 [mlx5_core]
mlx5e_ipsec_init_macs+0xc1/0x720 [mlx5_core]
mlx5e_ipsec_build_accel_xfrm_attrs+0x422/0x670 [mlx5_core]
mlx5e_ipsec_handle_event+0x2b9/0x460 [mlx5_core]
process_one_work+0x178/0x2e0
worker_thread+0x2ea/0x430
Published May 6, 2026 · Updated Aug 5, 2026
Critical · CVSS 9.8
In the Linux kernel, the following vulnerability has been resolved:
tcp: fix potential race in tcp_v6_syn_recv_sock()
Code in tcp_v6_syn_recv_sock() after the call to tcp_v4_syn_recv_sock()
is done too late.
After tcp_v4_syn_recv_sock(), the child socket is already visible
from TCP ehash table and other cpus might use it.
Since newinet->pinet6 is still pointing to the listener ipv6_pinfo
bad things can happen as syzbot found.
Move the problematic code in tcp_v6_mapped_child_init()
and call this new helper from tcp_v4_syn_recv_sock() before
the ehash insertion.
This allows the removal of one tcp_sync_mss(), since
tcp_v4_syn_recv_sock() will call it with the correct
context.
Published May 6, 2026 · Updated Aug 5, 2026
High · CVSS 7.5
In the Linux kernel, the following vulnerability has been resolved:
net: consume xmit errors of GSO frames
udpgro_frglist.sh and udpgro_bench.sh are the flakiest tests
currently in NIPA. They fail in the same exact way, TCP GRO
test stalls occasionally and the test gets killed after 10min.
These tests use veth to simulate GRO. They attach a trivial
("return XDP_PASS;") XDP program to the veth to force TSO off
and NAPI on.
Digging into the failure mode we can see that the connection
is completely stuck after a burst of drops. The sender's snd_nxt
is at sequence number N [1], but the receiver claims to have
received (rcv_nxt) up to N + 3 * MSS [2]. Last piece of the puzzle
is that senders rtx queue is not empty (let's say the block in
the rtx queue is at sequence number N - 4 * MSS [3]).
In this state, sender sends a retransmission from the rtx queue
with a single segment, and sequence numbers N-4*MSS:N-3*MSS [3].
Receiver sees it and responds with an ACK all the way up to
N + 3 * MSS [2]. But sender will reject this ack as TCP_ACK_UNSENT_DATA
because it has no recollection of ever sending data that far out [1].
And we are stuck.
The root cause is the mess of the xmit return codes. veth returns
an error when it can't xmit a frame. We end up with a loss event
like this:
-------------------------------------------------
| GSO super frame 1 | GSO super frame 2 |
|-----------------------------------------------|
| seg | seg | seg | seg | seg | seg | seg | seg |
| 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 |
-------------------------------------------------
x ok ok <ok>| ok ok ok <x>
\\
snd_nxt
"x" means packet lost by veth, and "ok" means it went thru.
Since veth has TSO disabled in this test it sees individual segments.
Segment 1 is on the retransmit queue and will be resent.
So why did the sender not advance snd_nxt even tho it clearly did
send up to seg 8? tcp_write_xmit() interprets the return code
from the core to mean that data has not been sent at all. Since
TCP deals with GSO super frames, not individual segment the crux
of the problem is that loss of a single segment can be interpreted
as loss of all. TCP only sees the last return code for the last
segment of the GSO frame (in <> brackets in the diagram above).
Of course for the problem to occur we need a setup or a device
without a Qdisc. Otherwise Qdisc layer disconnects the protocol
layer from the device errors completely.
We have multiple ways to fix this.
1) make veth not return an error when it lost a packet.
While this is what I think we did in the past, the issue keeps
reappearing and it's annoying to debug. The game of whack
a mole is not great.
2) fix the damn return codes
We only talk about NETDEV_TX_OK and NETDEV_TX_BUSY in the
documentation, so maybe we should make the return code from
ndo_start_xmit() a boolean. I like that the most, but perhaps
some ancient, not-really-networking protocol would suffer.
3) make TCP ignore the errors
It is not entirely clear to me what benefit TCP gets from
interpreting the result of ip_queue_xmit()? Specifically once
the connection is established and we're pushing data - packet
loss is just packet loss?
4) this fix
Ignore the rc in the Qdisc-less+GSO case, since it's unreliable.
We already always return OK in the TCQ_F_CAN_BYPASS case.
In the Qdisc-less case let's be a bit more conservative and only
mask the GSO errors. This path is taken by non-IP-"networks"
like CAN, MCTP etc, so we could regress some ancient thing.
This is the simplest, but also maybe the hackiest fix?
Similar fix has been proposed by Eric in the past but never committed
because original reporter was working with an OOT driver and wasn't
providing feedback (see Link).
Published May 6, 2026 · Updated Aug 5, 2026
High · CVSS 8.2
In the Linux kernel, the following vulnerability has been resolved:
netfilter: xt_tcpmss: check remaining length before reading optlen
Quoting reporter:
In net/netfilter/xt_tcpmss.c (lines 53-68), the TCP option parser reads
op[i+1] directly without validating the remaining option length.
If the last byte of the option field is not EOL/NOP (0/1), the code attempts
to index op[i+1]. In the case where i + 1 == optlen, this causes an
out-of-bounds read, accessing memory past the optlen boundary
(either reading beyond the stack buffer _opt or the
following payload).
Published May 6, 2026 · Updated Aug 5, 2026
High · CVSS 8.8
In the Linux kernel, the following vulnerability has been resolved:
xfs: delete attr leaf freemap entries when empty
Back in commit 2a2b5932db6758 ("xfs: fix attr leaf header freemap.size
underflow"), Brian Foster observed that it's possible for a small
freemap at the end of the end of the xattr entries array to experience
a size underflow when subtracting the space consumed by an expansion of
the entries array. There are only three freemap entries, which means
that it is not a complete index of all free space in the leaf block.
This code can leave behind a zero-length freemap entry with a nonzero
base. Subsequent setxattr operations can increase the base up to the
point that it overlaps with another freemap entry. This isn't in and of
itself a problem because the code in _leaf_add that finds free space
ignores any freemap entry with zero size.
However, there's another bug in the freemap update code in _leaf_add,
which is that it fails to update a freemap entry that begins midway
through the xattr entry that was just appended to the array. That can
result in the freemap containing two entries with the same base but
different sizes (0 for the "pushed-up" entry, nonzero for the entry
that's actually tracking free space). A subsequent _leaf_add can then
allocate xattr namevalue entries on top of the entries array, leading to
data loss. But fixing that is for later.
For now, eliminate the possibility of confusion by zeroing out the base
of any freemap entry that has zero size. Because the freemap is not
intended to be a complete index of free space, a subsequent failure to
find any free space for a new xattr will trigger block compaction, which
regenerates the freemap.
It looks like this bug has been in the codebase for quite a long time.
Published May 6, 2026 · Updated Aug 5, 2026
Critical · CVSS 9.8
In the Linux kernel, the following vulnerability has been resolved:
ipv6: ioam: fix heap buffer overflow in __ioam6_fill_trace_data()
On the receive path, __ioam6_fill_trace_data() uses trace->nodelen
to decide how much data to write for each node. It trusts this field
as-is from the incoming packet, with no consistency check against
trace->type (the 24-bit field that tells which data items are
present). A crafted packet can set nodelen=0 while setting type bits
0-21, causing the function to write ~100 bytes past the allocated
region (into skb_shared_info), which corrupts adjacent heap memory
and leads to a kernel panic.
Add a shared helper ioam6_trace_compute_nodelen() in ioam6.c to
derive the expected nodelen from the type field, and use it:
- in ioam6_iptunnel.c (send path, existing validation) to replace
the open-coded computation;
- in exthdrs.c (receive path, ipv6_hop_ioam) to drop packets whose
nodelen is inconsistent with the type field, before any data is
written.
Per RFC 9197, bits 12-21 are each short (4-octet) fields, so they
are included in IOAM6_MASK_SHORT_FIELDS (changed from 0xff100000 to
0xff1ffc00).
Published May 6, 2026 · Updated Aug 5, 2026
Critical · CVSS 9.8
In the Linux kernel, the following vulnerability has been resolved:
ksmbd: fix signededness bug in smb_direct_prepare_negotiation()
smb_direct_prepare_negotiation() casts an unsigned __u32 value
from sp->max_recv_size and req->preferred_send_size to a signed
int before computing min_t(int, ...). A maliciously provided
preferred_send_size of 0x80000000 will return as smaller than
max_recv_size, and then be used to set the maximum allowed
alowed receive size for the next message.
By sending a second message with a large value (>1420 bytes)
the attacker can then achieve a heap buffer overflow.
This fix replaces min_t(int, ...) with min_t(u32)
Published May 6, 2026 · Updated Aug 5, 2026
High · CVSS 7.5
In the Linux kernel, the following vulnerability has been resolved:
rnbd-srv: Zero the rsp buffer before using it
Before using the data buffer to send back the response message, zero it
completely. This prevents any stray bytes to be picked up by the client
side when there the message is exchanged between different protocol
versions.
Published May 6, 2026 · Updated Aug 5, 2026
High · CVSS 7.8
In the Linux kernel, the following vulnerability has been resolved:
net: usb: kaweth: remove TX queue manipulation in kaweth_set_rx_mode
kaweth_set_rx_mode(), the ndo_set_rx_mode callback, calls
netif_stop_queue() and netif_wake_queue(). These are TX queue flow
control functions unrelated to RX multicast configuration.
The premature netif_wake_queue() can re-enable TX while tx_urb is still
in-flight, leading to a double usb_submit_urb() on the same URB:
kaweth_start_xmit() {
netif_stop_queue();
usb_submit_urb(kaweth->tx_urb);
}
kaweth_set_rx_mode() {
netif_stop_queue();
netif_wake_queue(); // wakes TX queue before URB is done
}
kaweth_start_xmit() {
netif_stop_queue();
usb_submit_urb(kaweth->tx_urb); // URB submitted while active
}
This triggers the WARN in usb_submit_urb():
"URB submitted while active"
This is a similar class of bug fixed in rtl8150 by
- commit 958baf5eaee3 ("net: usb: Remove disruptive netif_wake_queue in rtl8150_set_multicast").
Also kaweth_set_rx_mode() is already functionally broken, the
real set_rx_mode action is performed by kaweth_async_set_rx_mode(),
which in turn is not a no-op only at ndo_open() time.
Published May 6, 2026 · Updated Aug 5, 2026
High · CVSS 7.8
In the Linux kernel, the following vulnerability has been resolved:
procfs: fix possible double mmput() in do_procmap_query()
When user provides incorrectly sized buffer for build ID for PROCMAP_QUERY
we return with -ENAMETOOLONG error. After recent changes this condition
happens later, after we unlocked mmap_lock/per-VMA lock and did mmput(),
so original goto out is now wrong and will double-mmput() mm_struct. Fix
by jumping further to clean up only vm_file and name_buf.
Published May 6, 2026 · Updated Aug 5, 2026
High · CVSS 8.8
In the Linux kernel, the following vulnerability has been resolved:
wifi: rtw89: pci: validate release report content before using for RTL8922DE
The commit 957eda596c76
("wifi: rtw89: pci: validate sequence number of TX release report")
does validation on existing chips, which somehow a release report of SKB
becomes malformed. As no clear cause found, add rules ahead for RTL8922DE
to avoid crash if it happens.
Published May 6, 2026 · Updated Aug 5, 2026
High · CVSS 8.8
In the Linux kernel, the following vulnerability has been resolved:
wifi: iwlwifi: fix 22000 series SMEM parsing
If the firmware were to report three LMACs (which doesn't
exist in hardware) then using "fwrt->smem_cfg.lmac[2]" is
an overrun of the array. Reject such and use IWL_FW_CHECK
instead of WARN_ON in this function.
Published May 6, 2026 · Updated Aug 5, 2026
High · CVSS 7.1
In the Linux kernel, the following vulnerability has been resolved:
erofs: fix interlaced plain identification for encoded extents
Only plain data whose start position and on-disk physical length are
both aligned to the block size should be classified as interlaced
plain extents. Otherwise, it must be treated as shifted plain extents.
This issue was found by syzbot using a crafted compressed image
containing plain extents with unaligned physical lengths, which can
cause OOB read in z_erofs_transform_plain().
Published May 6, 2026 · Updated Aug 5, 2026
High · CVSS 7.5
In the Linux kernel, the following vulnerability has been resolved:
udplite: Fix null-ptr-deref in __udp_enqueue_schedule_skb().
syzbot reported null-ptr-deref of udp_sk(sk)->udp_prod_queue. [0]
Since the cited commit, udp_lib_init_sock() can fail, as can
udp_init_sock() and udpv6_init_sock().
Let's handle the error in udplite_sk_init() and udplitev6_sk_init().
[0]:
BUG: KASAN: null-ptr-deref in instrument_atomic_read include/linux/instrumented.h:82 [inline]
BUG: KASAN: null-ptr-deref in atomic_read include/linux/atomic/atomic-instrumented.h:32 [inline]
BUG: KASAN: null-ptr-deref in __udp_enqueue_schedule_skb+0x151/0x1480 net/ipv4/udp.c:1719
Read of size 4 at addr 0000000000000008 by task syz.2.18/2944
CPU: 1 UID: 0 PID: 2944 Comm: syz.2.18 Not tainted syzkaller #0 PREEMPTLAZY
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/25/2025
Call Trace:
<IRQ>
dump_stack_lvl+0xe8/0x150 lib/dump_stack.c:120
kasan_report+0xa2/0xe0 mm/kasan/report.c:595
check_region_inline mm/kasan/generic.c:-1 [inline]
kasan_check_range+0x264/0x2c0 mm/kasan/generic.c:200
instrument_atomic_read include/linux/instrumented.h:82 [inline]
atomic_read include/linux/atomic/atomic-instrumented.h:32 [inline]
__udp_enqueue_schedule_skb+0x151/0x1480 net/ipv4/udp.c:1719
__udpv6_queue_rcv_skb net/ipv6/udp.c:795 [inline]
udpv6_queue_rcv_one_skb+0xa2e/0x1ad0 net/ipv6/udp.c:906
udp6_unicast_rcv_skb+0x227/0x380 net/ipv6/udp.c:1064
ip6_protocol_deliver_rcu+0xe17/0x1540 net/ipv6/ip6_input.c:438
ip6_input_finish+0x191/0x350 net/ipv6/ip6_input.c:489
NF_HOOK+0x354/0x3f0 include/linux/netfilter.h:318
ip6_input+0x16c/0x2b0 net/ipv6/ip6_input.c:500
NF_HOOK+0x354/0x3f0 include/linux/netfilter.h:318
__netif_receive_skb_one_core net/core/dev.c:6149 [inline]
__netif_receive_skb+0xd3/0x370 net/core/dev.c:6262
process_backlog+0x4d6/0x1160 net/core/dev.c:6614
__napi_poll+0xae/0x320 net/core/dev.c:7678
napi_poll net/core/dev.c:7741 [inline]
net_rx_action+0x60d/0xdc0 net/core/dev.c:7893
handle_softirqs+0x209/0x8d0 kernel/softirq.c:622
do_softirq+0x52/0x90 kernel/softirq.c:523
</IRQ>
<TASK>
__local_bh_enable_ip+0xe7/0x120 kernel/softirq.c:450
local_bh_enable include/linux/bottom_half.h:33 [inline]
rcu_read_unlock_bh include/linux/rcupdate.h:924 [inline]
__dev_queue_xmit+0x109c/0x2dc0 net/core/dev.c:4856
__ip6_finish_output net/ipv6/ip6_output.c:-1 [inline]
ip6_finish_output+0x158/0x4e0 net/ipv6/ip6_output.c:219
NF_HOOK_COND include/linux/netfilter.h:307 [inline]
ip6_output+0x342/0x580 net/ipv6/ip6_output.c:246
ip6_send_skb+0x1d7/0x3c0 net/ipv6/ip6_output.c:1984
udp_v6_send_skb+0x9a5/0x1770 net/ipv6/udp.c:1442
udp_v6_push_pending_frames+0xa2/0x140 net/ipv6/udp.c:1469
udpv6_sendmsg+0xfe0/0x2830 net/ipv6/udp.c:1759
sock_sendmsg_nosec net/socket.c:727 [inline]
__sock_sendmsg+0xe5/0x270 net/socket.c:742
__sys_sendto+0x3eb/0x580 net/socket.c:2206
__do_sys_sendto net/socket.c:2213 [inline]
__se_sys_sendto net/socket.c:2209 [inline]
__x64_sys_sendto+0xde/0x100 net/socket.c:2209
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xd2/0xf20 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x76/0x7e
RIP: 0033:0x7f67b4d9c629
Code: ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 e8 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007f67b5c98028 EFLAGS: 00000246 ORIG_RAX: 000000000000002c
RAX: ffffffffffffffda RBX: 00007f67b5015fa0 RCX: 00007f67b4d9c629
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000003
RBP: 00007f67b4e32b39 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000040000 R11: 0000000000000246 R12: 0000000000000000
R13: 00007f67b5016038 R14: 00007f67b5015fa0 R15: 00007ffe3cb66dd8
</TASK>
Published May 6, 2026 · Updated Aug 5, 2026
High · CVSS 8.8
In the Linux kernel, the following vulnerability has been resolved:
xfs: fix freemap adjustments when adding xattrs to leaf blocks
xfs/592 and xfs/794 both trip this assertion in the leaf block freemap
adjustment code after ~20 minutes of running on my test VMs:
ASSERT(ichdr->firstused >= ichdr->count * sizeof(xfs_attr_leaf_entry_t)
+ xfs_attr3_leaf_hdr_size(leaf));
Upon enabling quite a lot more debugging code, I narrowed this down to
fsstress trying to set a local extended attribute with namelen=3 and
valuelen=71. This results in an entry size of 80 bytes.
At the start of xfs_attr3_leaf_add_work, the freemap looks like this:
i 0 base 448 size 0 rhs 448 count 46
i 1 base 388 size 132 rhs 448 count 46
i 2 base 2120 size 4 rhs 448 count 46
firstused = 520
where "rhs" is the first byte past the end of the leaf entry array.
This is inconsistent -- the entries array ends at byte 448, but
freemap[1] says there's free space starting at byte 388!
By the end of the function, the freemap is in worse shape:
i 0 base 456 size 0 rhs 456 count 47
i 1 base 388 size 52 rhs 456 count 47
i 2 base 2120 size 4 rhs 456 count 47
firstused = 440
Important note: 388 is not aligned with the entries array element size
of 8 bytes.
Based on the incorrect freemap, the name area starts at byte 440, which
is below the end of the entries array! That's why the assertion
triggers and the filesystem shuts down.
How did we end up here? First, recall from the previous patch that the
freemap array in an xattr leaf block is not intended to be a
comprehensive map of all free space in the leaf block. In other words,
it's perfectly legal to have a leaf block with:
* 376 bytes in use by the entries array
* freemap[0] has [base = 376, size = 8]
* freemap[1] has [base = 388, size = 1500]
* the space between 376 and 388 is free, but the freemap stopped
tracking that some time ago
If we add one xattr, the entries array grows to 384 bytes, and
freemap[0] becomes [base = 384, size = 0]. So far, so good. But if we
add a second xattr, the entries array grows to 392 bytes, and freemap[0]
gets pushed up to [base = 392, size = 0]. This is bad, because
freemap[1] hasn't been updated, and now the entries array and the free
space claim the same space.
The fix here is to adjust all freemap entries so that none of them
collide with the entries array. Note that this fix relies on commit
2a2b5932db6758 ("xfs: fix attr leaf header freemap.size underflow") and
the previous patch that resets zero length freemap entries to have
base = 0.
Published May 6, 2026 · Updated Aug 5, 2026
High · CVSS 7.8
In the Linux kernel, the following vulnerability has been resolved:
xfs: remove xfs_attr_leaf_hasname
The calling convention of xfs_attr_leaf_hasname() is problematic, because
it returns a NULL buffer when xfs_attr3_leaf_read fails, a valid buffer
when xfs_attr3_leaf_lookup_int returns -ENOATTR or -EEXIST, and a
non-NULL buffer pointer for an already released buffer when
xfs_attr3_leaf_lookup_int fails with other error values.
Fix this by simply open coding xfs_attr_leaf_hasname in the callers, so
that the buffer release code is done by each caller of
xfs_attr3_leaf_read.
Published May 6, 2026 · Updated Aug 5, 2026
High · CVSS 7.8
In the Linux kernel, the following vulnerability has been resolved:
perf/arm-cmn: Reject unsupported hardware configurations
So far we've been fairly lax about accepting both unknown CMN models
(at least with a warning), and unknown revisions of those which we
do know, as although things do frequently change between releases,
typically enough remains the same to be somewhat useful for at least
some basic bringup checks. However, we also make assumptions of the
maximum supported sizes and numbers of things in various places, and
there's no guarantee that something new might not be bigger and lead
to nasty array overflows. Make sure we only try to run on things that
actually match our assumptions and so will not risk memory corruption.
We have at least always failed on completely unknown node types, so
update that error message for clarity and consistency too.
Published May 6, 2026 · Updated Aug 5, 2026
High · CVSS 8.6
In the Linux kernel, the following vulnerability has been resolved:
xfrm6: fix uninitialized saddr in xfrm6_get_saddr()
xfrm6_get_saddr() does not check the return value of
ipv6_dev_get_saddr(). When ipv6_dev_get_saddr() fails to find a suitable
source address (returns -EADDRNOTAVAIL), saddr->in6 is left
uninitialized, but xfrm6_get_saddr() still returns 0 (success).
This causes the caller xfrm_tmpl_resolve_one() to use the uninitialized
address in xfrm_state_find(), triggering KMSAN warning:
=====================================================
BUG: KMSAN: uninit-value in xfrm_state_find+0x2424/0xa940
xfrm_state_find+0x2424/0xa940
xfrm_resolve_and_create_bundle+0x906/0x5a20
xfrm_lookup_with_ifid+0xcc0/0x3770
xfrm_lookup_route+0x63/0x2b0
ip_route_output_flow+0x1ce/0x270
udp_sendmsg+0x2ce1/0x3400
inet_sendmsg+0x1ef/0x2a0
__sock_sendmsg+0x278/0x3d0
__sys_sendto+0x593/0x720
__x64_sys_sendto+0x130/0x200
x64_sys_call+0x332b/0x3e70
do_syscall_64+0xd3/0xf80
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Local variable tmp.i.i created at:
xfrm_resolve_and_create_bundle+0x3e3/0x5a20
xfrm_lookup_with_ifid+0xcc0/0x3770
=====================================================
Fix by checking the return value of ipv6_dev_get_saddr() and propagating
the error.
Published May 6, 2026 · Updated Aug 5, 2026
High · CVSS 8.1
In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: L2CAP: Fix missing key size check for L2CAP_LE_CONN_REQ
This adds a check for encryption key size upon receiving
L2CAP_LE_CONN_REQ which is required by L2CAP/LE/CFC/BV-15-C which
expects L2CAP_CR_LE_BAD_KEY_SIZE.
Published May 6, 2026 · Updated Aug 5, 2026
High · CVSS 7.9
In the Linux kernel, the following vulnerability has been resolved:
KVM: nSVM: Always use vmcb01 in VMLOAD/VMSAVE emulation
Commit cc3ed80ae69f ("KVM: nSVM: always use vmcb01 to for vmsave/vmload
of guest state") made KVM always use vmcb01 for the fields controlled by
VMSAVE/VMLOAD, but it missed updating the VMLOAD/VMSAVE emulation code
to always use vmcb01.
As a result, if VMSAVE/VMLOAD is executed by an L2 guest and is not
intercepted by L1, KVM will mistakenly use vmcb02. Always use vmcb01
instead of the current VMCB.
Published May 6, 2026 · Updated Aug 5, 2026
High · CVSS 7.8
In the Linux kernel, the following vulnerability has been resolved:
RDMA/umem: Fix double dma_buf_unpin in failure path
In ib_umem_dmabuf_get_pinned_with_dma_device(), the call to
ib_umem_dmabuf_map_pages() can fail. If this occurs, the dmabuf
is immediately unpinned but the umem_dmabuf->pinned flag is still
set. Then, when ib_umem_release() is called, it calls
ib_umem_dmabuf_revoke() which will call dma_buf_unpin() again.
Fix this by removing the immediate unpin upon failure and just let
the ib_umem_release/revoke path handle it. This also ensures the
proper unmap-unpin unwind ordering if the dmabuf_map_pages call
happened to fail due to dma_resv_wait_timeout (and therefore has
a non-NULL umem_dmabuf->sgt).
Published May 6, 2026 · Updated Aug 5, 2026
High · CVSS 7.8
In the Linux kernel, the following vulnerability has been resolved:
ALSA: mixer: oss: Add card disconnect checkpoints
ALSA OSS mixer layer calls the kcontrol ops rather individually, and
pending calls might be not always caught at disconnecting the device.
For avoiding the potential UAF scenarios, add sanity checks of the
card disconnection at each entry point of OSS mixer accesses. The
rwsem is taken just before that check, hence the rest context should
be covered by that properly.
Published May 6, 2026 · Updated Aug 5, 2026
Critical · CVSS 9.8
In the Linux kernel, the following vulnerability has been resolved:
dlm: validate length in dlm_search_rsb_tree
The len parameter in dlm_dump_rsb_name() is not validated and comes
from network messages. When it exceeds DLM_RESNAME_MAXLEN, it can
cause out-of-bounds write in dlm_search_rsb_tree().
Add length validation to prevent potential buffer overflow.
Published May 6, 2026 · Updated Aug 5, 2026
High · CVSS 7.8
In the Linux kernel, the following vulnerability has been resolved:
RDMA/irdma: Fix double free related to rereg_user_mr
If IB_MR_REREG_TRANS is set during rereg_user_mr, the
umem will be released and a new one will be allocated
in irdma_rereg_mr_trans. If any step of irdma_rereg_mr_trans
fails after the new umem is allocated, it releases the umem,
but does not set iwmr->region to NULL. The problem is that
this failure is propagated to the user, who will then call
ibv_dereg_mr (as they should). Then, the dereg_mr path will
see a non-NULL umem and attempt to call ib_umem_release again.
Fix this by setting iwmr->region to NULL after ib_umem_release.
Fixed: 5ac388db27c4 ("RDMA/irdma: Add support to re-register a memory region")
Published May 6, 2026 · Updated Aug 5, 2026
Critical · CVSS 9.1
In the Linux kernel, the following vulnerability has been resolved:
btrfs: tracepoints: get correct superblock from dentry in event btrfs_sync_file()
If overlay is used on top of btrfs, dentry->d_sb translates to overlay's
super block and fsid assignment will lead to a crash.
Use file_inode(file)->i_sb to always get btrfs_sb.
Published May 6, 2026 · Updated Aug 5, 2026
High · CVSS 7.8
In the Linux kernel, the following vulnerability has been resolved:
netfilter: ctnetlink: ensure safe access to master conntrack
Holding reference on the expectation is not sufficient, the master
conntrack object can just go away, making exp->master invalid.
To access exp->master safely:
- Grab the nf_conntrack_expect_lock, this gets serialized with
clean_from_lists() which also holds this lock when the master
conntrack goes away.
- Hold reference on master conntrack via nf_conntrack_find_get().
Not so easy since the master tuple to look up for the master conntrack
is not available in the existing problematic paths.
This patch goes for extending the nf_conntrack_expect_lock section
to address this issue for simplicity, in the cases that are described
below this is just slightly extending the lock section.
The add expectation command already holds a reference to the master
conntrack from ctnetlink_create_expect().
However, the delete expectation command needs to grab the spinlock
before looking up for the expectation. Expand the existing spinlock
section to address this to cover the expectation lookup. Note that,
the nf_ct_expect_iterate_net() calls already grabs the spinlock while
iterating over the expectation table, which is correct.
The get expectation command needs to grab the spinlock to ensure master
conntrack does not go away. This also expands the existing spinlock
section to cover the expectation lookup too. I needed to move the
netlink skb allocation out of the spinlock to keep it GFP_KERNEL.
For the expectation events, the IPEXP_DESTROY event is already delivered
under the spinlock, just move the delivery of IPEXP_NEW under the
spinlock too because the master conntrack event cache is reached through
exp->master.
While at it, add lockdep notations to help identify what codepaths need
to grab the spinlock.
Published May 6, 2026 · Updated Aug 5, 2026
Critical · CVSS 9.4
In the Linux kernel, the following vulnerability has been resolved:
netfilter: nft_set_pipapo_avx2: don't return non-matching entry on expiry
New test case fails unexpectedly when avx2 matching functions are used.
The test first loads a ranomly generated pipapo set
with 'ipv4 . port' key, i.e. nft -f foo.
This works. Then, it reloads the set after a flush:
(echo flush set t s; cat foo) | nft -f -
This is expected to work, because its the same set after all and it was
already loaded once.
But with avx2, this fails: nft reports a clashing element.
The reported clash is of following form:
We successfully re-inserted
a . b
c . d
Then we try to insert a . d
avx2 finds the already existing a . d, which (due to 'flush set') is marked
as invalid in the new generation. It skips the element and moves to next.
Due to incorrect masking, the skip-step finds the next matching
element *only considering the first field*,
i.e. we return the already reinserted "a . b", even though the
last field is different and the entry should not have been matched.
No such error is reported for the generic c implementation (no avx2) or when
the last field has to use the 'nft_pipapo_avx2_lookup_slow' fallback.
Bisection points to
7711f4bb4b36 ("netfilter: nft_set_pipapo: fix range overlap detection")
but that fix merely uncovers this bug.
Before this commit, the wrong element is returned, but erronously
reported as a full, identical duplicate.
The root-cause is too early return in the avx2 match functions.
When we process the last field, we should continue to process data
until the entire input size has been consumed to make sure no stale
bits remain in the map.
Published May 6, 2026 · Updated Aug 5, 2026
High · CVSS 8.8
In the Linux kernel, the following vulnerability has been resolved:
wifi: wl1251: validate packet IDs before indexing tx_frames
wl1251_tx_packet_cb() uses the firmware completion ID directly to index
the fixed 16-entry wl->tx_frames[] array. The ID is a raw u8 from the
completion block, and the callback does not currently verify that it
fits the array before dereferencing it.
Reject completion IDs that fall outside wl->tx_frames[] and keep the
existing NULL check in the same guard. This keeps the fix local to the
trust boundary and avoids touching the rest of the completion flow.
Published May 6, 2026 · Updated Aug 5, 2026
High · CVSS 7.8
In the Linux kernel, the following vulnerability has been resolved:
HID: roccat: fix use-after-free in roccat_report_event
roccat_report_event() iterates over the device->readers list without
holding the readers_lock. This allows a concurrent roccat_release() to
remove and free a reader while it's still being accessed, leading to a
use-after-free.
Protect the readers list traversal with the readers_lock mutex.
Published May 6, 2026 · Updated Aug 5, 2026
High · CVSS 8.8
In the Linux kernel, the following vulnerability has been resolved:
wifi: brcmfmac: validate bsscfg indices in IF events
brcmf_fweh_handle_if_event() validates the firmware-provided interface
index before it touches drvr->iflist[], but it still uses the raw
bsscfgidx field as an array index without a matching range check.
Reject IF events whose bsscfg index does not fit in drvr->iflist[]
before indexing the interface array.
[add missing wifi prefix]
Published May 6, 2026 · Updated Aug 5, 2026
High · CVSS 7.8
In the Linux kernel, the following vulnerability has been resolved:
cachefiles: fix incorrect dentry refcount in cachefiles_cull()
The patch mentioned below changed cachefiles_bury_object() to expect 2
references to the 'rep' dentry. Three of the callers were changed to
use start_removing_dentry() which takes an extra reference so in those
cases the call gets the expected references.
However there is another call to cachefiles_bury_object() in
cachefiles_cull() which did not need to be changed to use
start_removing_dentry() and so was not properly considered.
It still passed the dentry with just one reference so the net result is
that a reference is lost.
To meet the expectations of cachefiles_bury_object(), cachefiles_cull()
must take an extra reference before the call. It will be dropped by
cachefiles_bury_object().
Published May 6, 2026 · Updated Aug 5, 2026
High · CVSS 7.5
In the Linux kernel, the following vulnerability has been resolved:
ipv6: ioam: fix potential NULL dereferences in __ioam6_fill_trace_data()
We need to check __in6_dev_get() for possible NULL value, as
suggested by Yiming Qian.
Also add skb_dst_dev_rcu() instead of skb_dst_dev(),
and two missing READ_ONCE().
Note that @dev can't be NULL.
Published May 6, 2026 · Updated Aug 5, 2026
High · CVSS 7.5
In the Linux kernel, the following vulnerability has been resolved:
ipv4: icmp: fix null-ptr-deref in icmp_build_probe()
ipv6_stub->ipv6_dev_find() may return ERR_PTR(-EAFNOSUPPORT) when the
IPv6 stack is not active (CONFIG_IPV6=m and not loaded), and passing
this error pointer to dev_hold() will cause a kernel crash with
null-ptr-deref.
Instead, silently discard the request. RFC 8335 does not appear to
define a specific response for the case where an IPv6 interface
identifier is syntactically valid but the implementation cannot perform
the lookup at runtime, and silently dropping the request may safer than
misreporting "No Such Interface".
Published May 6, 2026 · Updated Aug 5, 2026
High · CVSS 7.8
In the Linux kernel, the following vulnerability has been resolved:
xsk: tighten UMEM headroom validation to account for tailroom and min frame
The current headroom validation in xdp_umem_reg() could leave us with
insufficient space dedicated to even receive minimum-sized ethernet
frame. Furthermore if multi-buffer would come to play then
skb_shared_info stored at the end of XSK frame would be corrupted.
HW typically works with 128-aligned sizes so let us provide this value
as bare minimum.
Multi-buffer setting is known later in the configuration process so
besides accounting for 128 bytes, let us also take care of tailroom space
upfront.
Published May 6, 2026 · Updated Aug 5, 2026
High · CVSS 7.8
In the Linux kernel, the following vulnerability has been resolved:
xfrm: Wait for RCU readers during policy netns exit
xfrm_policy_fini() frees the policy_bydst hash tables after flushing the
policy work items and deleting all policies, but it does not wait for
concurrent RCU readers to leave their read-side critical sections first.
The policy_bydst tables are published via rcu_assign_pointer() and are
looked up through rcu_dereference_check(), so netns teardown must also
wait for an RCU grace period before freeing the table memory.
Fix this by adding synchronize_rcu() before freeing the policy hash tables.
Published May 6, 2026 · Updated Aug 5, 2026
High · CVSS 7.8
In the Linux kernel, the following vulnerability has been resolved:
netfilter: nfnetlink_queue: make hash table per queue
Sharing a global hash table among all queues is tempting, but
it can cause crash:
BUG: KASAN: slab-use-after-free in nfqnl_recv_verdict+0x11ac/0x15e0 [nfnetlink_queue]
[..]
nfqnl_recv_verdict+0x11ac/0x15e0 [nfnetlink_queue]
nfnetlink_rcv_msg+0x46a/0x930
kmem_cache_alloc_node_noprof+0x11e/0x450
struct nf_queue_entry is freed via kfree, but parallel cpu can still
encounter such an nf_queue_entry when walking the list.
Alternative fix is to free the nf_queue_entry via kfree_rcu() instead,
but as we have to alloc/free for each skb this will cause more mem
pressure.
Published May 6, 2026 · Updated Aug 5, 2026
Critical · CVSS 9.1
In the Linux kernel, the following vulnerability has been resolved:
net: ioam6: fix OOB and missing lock
When trace->type.bit6 is set:
if (trace->type.bit6) {
...
queue = skb_get_tx_queue(dev, skb);
qdisc = rcu_dereference(queue->qdisc);
This code can lead to an out-of-bounds access of the dev->_tx[] array
when is_input is true. In such a case, the packet is on the RX path and
skb->queue_mapping contains the RX queue index of the ingress device. If
the ingress device has more RX queues than the egress device (dev) has
TX queues, skb_get_queue_mapping(skb) will exceed dev->num_tx_queues.
Add a check to avoid this situation since skb_get_tx_queue() does not
clamp the index. This issue has also revealed that per queue visibility
cannot be accurate and will be replaced later as a new feature.
While at it, add missing lock around qdisc_qstats_qlen_backlog(). The
function __ioam6_fill_trace_data() is called from both softirq and
process contexts, hence the use of spin_lock_bh() here.
Published May 6, 2026 · Updated Aug 5, 2026
High · CVSS 7.8
In the Linux kernel, the following vulnerability has been resolved:
crypto: af_alg - Fix page reassignment overflow in af_alg_pull_tsgl
When page reassignment was added to af_alg_pull_tsgl the original
loop wasn't updated so it may try to reassign one more page than
necessary.
Add the check to the reassignment so that this does not happen.
Also update the comment which still refers to the obsolete offset
argument.
Published May 6, 2026 · Updated Aug 5, 2026
High · CVSS 7.8
In the Linux kernel, the following vulnerability has been resolved:
ocfs2: validate inline data i_size during inode read
When reading an inode from disk, ocfs2_validate_inode_block() performs
various sanity checks but does not validate the size of inline data. If
the filesystem is corrupted, an inode's i_size can exceed the actual
inline data capacity (id_count).
This causes ocfs2_dir_foreach_blk_id() to iterate beyond the inline data
buffer, triggering a use-after-free when accessing directory entries from
freed memory.
In the syzbot report:
- i_size was 1099511627576 bytes (~1TB)
- Actual inline data capacity (id_count) is typically <256 bytes
- A garbage rec_len (54648) caused ctx->pos to jump out of bounds
- This triggered a UAF in ocfs2_check_dir_entry()
Fix by adding a validation check in ocfs2_validate_inode_block() to ensure
inodes with inline data have i_size <= id_count. This catches the
corruption early during inode read and prevents all downstream code from
operating on invalid data.
Published May 6, 2026 · Updated Aug 5, 2026
High · CVSS 7.8
In the Linux kernel, the following vulnerability has been resolved:
ocfs2: fix out-of-bounds write in ocfs2_write_end_inline
KASAN reports a use-after-free write of 4086 bytes in
ocfs2_write_end_inline, called from ocfs2_write_end_nolock during a
copy_file_range splice fallback on a corrupted ocfs2 filesystem mounted on
a loop device. The actual bug is an out-of-bounds write past the inode
block buffer, not a true use-after-free. The write overflows into an
adjacent freed page, which KASAN reports as UAF.
The root cause is that ocfs2_try_to_write_inline_data trusts the on-disk
id_count field to determine whether a write fits in inline data. On a
corrupted filesystem, id_count can exceed the physical maximum inline data
capacity, causing writes to overflow the inode block buffer.
Call trace (crash path):
vfs_copy_file_range (fs/read_write.c:1634)
do_splice_direct
splice_direct_to_actor
iter_file_splice_write
ocfs2_file_write_iter
generic_perform_write
ocfs2_write_end
ocfs2_write_end_nolock (fs/ocfs2/aops.c:1949)
ocfs2_write_end_inline (fs/ocfs2/aops.c:1915)
memcpy_from_folio <-- KASAN: write OOB
So add id_count upper bound check in ocfs2_validate_inode_block() to
alongside the existing i_size check to fix it.
Published May 6, 2026 · Updated Aug 5, 2026
High · CVSS 7.8
In the Linux kernel, the following vulnerability has been resolved:
eventpoll: defer struct eventpoll free to RCU grace period
In certain situations, ep_free() in eventpoll.c will kfree the epi->ep
eventpoll struct while it still being used by another concurrent thread.
Defer the kfree() to an RCU callback to prevent UAF.
Published May 6, 2026 · Updated Aug 5, 2026
Critical · CVSS 9.1
In the Linux kernel, the following vulnerability has been resolved:
dcache: Limit the minimal number of bucket to two
There is an OOB read problem on dentry_hashtable when user sets
'dhash_entries=1':
BUG: unable to handle page fault for address: ffff888b30b774b0
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
Oops: Oops: 0000 [#1] SMP PTI
RIP: 0010:__d_lookup+0x56/0x120
Call Trace:
d_lookup.cold+0x16/0x5d
lookup_dcache+0x27/0xf0
lookup_one_qstr_excl+0x2a/0x180
start_dirop+0x55/0xa0
simple_start_creating+0x8d/0xa0
debugfs_start_creating+0x8c/0x180
debugfs_create_dir+0x1d/0x1c0
pinctrl_init+0x6d/0x140
do_one_initcall+0x6d/0x3d0
kernel_init_freeable+0x39f/0x460
kernel_init+0x2a/0x260
There will be only one bucket in dentry_hashtable when dhash_entries is
set as one, and d_hash_shift is calculated as 32 by dcache_init(). Then,
following process will access more than one buckets(which memory region
is not allocated) in dentry_hashtable:
d_lookup
b = d_hash(hash)
dentry_hashtable + ((u32)hashlen >> d_hash_shift)
// The C standard defines the behavior of right shift amounts
// exceeding the bit width of the operand as undefined. The
// result of '(u32)hashlen >> d_hash_shift' becomes 'hashlen',
// so 'b' will point to an unallocated memory region.
hlist_bl_for_each_entry_rcu(b)
hlist_bl_first_rcu(head)
h->first // read OOB!
Fix it by limiting the minimal number of dentry_hashtable bucket to two,
so that 'd_hash_shift' won't exceeds the bit width of type u32.
Published May 5, 2026 · Updated Aug 5, 2026
High · CVSS 7.8
In the Linux kernel, the following vulnerability has been resolved:
bpf: Reset register ID for BPF_END value tracking
When a register undergoes a BPF_END (byte swap) operation, its scalar
value is mutated in-place. If this register previously shared a scalar ID
with another register (e.g., after an `r1 = r0` assignment), this tie must
be broken.
Currently, the verifier misses resetting `dst_reg->id` to 0 for BPF_END.
Consequently, if a conditional jump checks the swapped register, the
verifier incorrectly propagates the learned bounds to the linked register,
leading to false confidence in the linked register's value and potentially
allowing out-of-bounds memory accesses.
Fix this by explicitly resetting `dst_reg->id` to 0 in the BPF_END case
to break the scalar tie, similar to how BPF_NEG handles it via
`__mark_reg_known`.
Published May 5, 2026 · Updated Aug 5, 2026
