Enterprise sub-techniques

Adversaries may register for web services that can be used during targeting. A variety of popular websites exist for adversaries to register for a web-based service that can be abused during later stages of the adversary lifecycle, such as during Command and Control (Web Service), Exfiltration Over Web Service, or Phishing. Using common services, such as those offered by Google, GitHub, or Twitter, makes it easier for adversaries to hide in expected noise.[1][2] By utilizing a web service, adversaries can make it difficult to physically tie back operations to them.

Adversaries may compromise access to third-party web services that can be used during targeting. A variety of popular websites exist for legitimate users to register for web-based services, such as GitHub, Twitter, Dropbox, Google, SendGrid, etc. Adversaries may try to take ownership of a legitimate user's access to a web service and use that web service as infrastructure in support of cyber operations. Such web services can be abused during later stages of the adversary lifecycle, such as during Command and Control (Web Service), Exfiltration Over Web Service, or Phishing.[1] Using common services, such as those offered by Google or Twitter, makes it easier for adversaries to hide in expected noise. By utilizing a web service, particularly when access is stolen from legitimate users, adversaries can make it difficult to physically tie back operations to them. Additionally, leveraging compromised web-based email services may allow adversaries to leverage the trust associated with legitimate domains.

Adversaries can use stolen session cookies to authenticate to web applications and services. This technique bypasses some multi-factor authentication protocols since the session is already authenticated.[1]

Authentication cookies are commonly used in web applications, including cloud-based services, after a user has authenticated to the service so credentials are not passed and re-authentication does not need to occur as frequently. Cookies are often valid for an extended period of time, even if the web application is not actively used. After the cookie is obtained through Steal Web Session Cookie or Web Cookies, the adversary may then import the cookie into a browser they control and is then able to use the site or application as the user for as long as the session cookie is active. Once logged into the site, an adversary can access sensitive information, read email, or perform actions that the victim account has permissions to perform.

There have been examples of malware targeting session cookies to bypass multi-factor authentication systems.[2]

Adversaries may backdoor web servers with web shells to establish persistent access to systems. A Web shell is a Web script that is placed on an openly accessible Web server to allow an adversary to access the Web server as a gateway into a network. A Web shell may provide a set of functions to execute or a command-line interface on the system that hosts the Web server.[1]

In addition to a server-side script, a Web shell may have a client interface program that is used to talk to the Web server (e.g. China Chopper Web shell client).[2]

Adversaries may search for information about Wi-Fi networks, such as network names and passwords, on compromised systems. Adversaries may use Wi-Fi information as part of Account Discovery, Remote System Discovery, and other discovery or Credential Access activity to support both ongoing and future campaigns.

Adversaries may collect various types of information about Wi-Fi networks from hosts. For example, on Windows names and passwords of all Wi-Fi networks a device has previously connected to may be available through `netsh wlan show profiles` to enumerate Wi-Fi names and then `netsh wlan show profile “Wi-Fi name” key=clear` to show a Wi-Fi network’s corresponding password.[1][2][3] Additionally, names and other details of locally reachable Wi-Fi networks can be discovered using calls to `wlanAPI.dll` Native API functions.[4]

On Linux, names and passwords of all Wi-Fi-networks a device has previously connected to may be available in files under ` /etc/NetworkManager/system-connections/`.[5] On macOS, the password of a known Wi-Fi may be identified with ` security find-generic-password -wa wifiname` (requires admin username/password).[6]

Adversaries may abuse the Windows command shell for execution. The Windows command shell (cmd) is the primary command prompt on Windows systems. The Windows command prompt can be used to control almost any aspect of a system, with various permission levels required for different subsets of commands. The command prompt can be invoked remotely via Remote Services such as SSH.[1]

Batch files (ex: .bat or .cmd) also provide the shell with a list of sequential commands to run, as well as normal scripting operations such as conditionals and loops. Common uses of batch files include long or repetitive tasks, or the need to run the same set of commands on multiple systems.

Adversaries may leverage cmd to execute various commands and payloads. Common uses include cmd to execute a single command, or abusing cmd interactively with input and output forwarded over a command and control channel.

Adversaries may acquire credentials from the Windows Credential Manager. The Credential Manager stores credentials for signing into websites, applications, and/or devices that request authentication through NTLM or Kerberos in Credential Lockers (previously known as Windows Vaults).[1][2]

The Windows Credential Manager separates website credentials from application or network credentials in two lockers. As part of Credentials from Web Browsers, Internet Explorer and Microsoft Edge website credentials are managed by the Credential Manager and are stored in the Web Credentials locker. Application and network credentials are stored in the Windows Credentials locker.

Credential Lockers store credentials in encrypted `.vcrd` files, located under `%Systemdrive%\Users\\[Username]\AppData\Local\Microsoft\\[Vault/Credentials]\`. The encryption key can be found in a file named Policy.vpol, typically located in the same folder as the credentials.[3][4]

Adversaries may list credentials managed by the Windows Credential Manager through several mechanisms. vaultcmd.exe is a native Windows executable that can be used to enumerate credentials stored in the Credential Locker through a command-line interface. Adversaries may also gather credentials by directly reading files located inside of the Credential Lockers. Windows APIs, such as CredEnumerateA, may also be absued to list credentials managed by the Credential Manager.[5][6]

Adversaries may also obtain credentials from credential backups. Credential backups and restorations may be performed by running rundll32.exe keymgr.dll KRShowKeyMgr then selecting the “Back up...” button on the “Stored User Names and Passwords” GUI.

Password recovery tools may also obtain plain text passwords from the Credential Manager.[4]

Adversaries may disable or modify the Windows host firewall to bypass controls limiting network usage. This can include disabling the Windows host firewall entirely, suppressing specific profiles (domain, private, public), or adding, deleting, and modifying firewall rules to allow or restrict traffic.[1]

Adversaries may perform these modifications through multiple mechanisms depending on the Windows operating system and access level. For example, adversaries may use command-line utilities (e.g., `netsh advfirewall` or PowerShell cmdlets like `Set-NetFirewallProfile`, `New-NetFirewallRule`), Windows Registry modifications (e.g., altering firewall states and rule configurations via registry keys), or the Windows Control Panel to modify firewall settings through the Windows Security interface.

By disabling or modifying Windows firewall services, adversaries may enable access to remote services, open ports for command and control traffic, or configure rules for further actions.

Adversaries may establish persistence and elevate privileges by executing malicious content triggered by a Windows Management Instrumentation (WMI) event subscription. WMI can be used to install event filters, providers, consumers, and bindings that execute code when a defined event occurs. Examples of events that may be subscribed to are the wall clock time, user login, or the computer's uptime.[1]

Adversaries may use the capabilities of WMI to subscribe to an event and execute arbitrary code when that event occurs, providing persistence on a system.[2][3] Adversaries may also compile WMI scripts – using `mofcomp.exe` –into Windows Management Object (MOF) files (.mof extension) that can be used to create a malicious subscription.[4][5]

WMI subscription execution is proxied by the WMI Provider Host process (WmiPrvSe.exe) and thus may result in elevated SYSTEM privileges.

Adversaries may modify file or directory permissions/attributes to evade access control lists (ACLs) and access protected files.[1][2] File and directory permissions are commonly managed by ACLs configured by the file or directory owner, or users with the appropriate permissions. File and directory ACL implementations vary by platform, but generally explicitly designate which users or groups can perform which actions (read, write, execute, etc.).

Windows implements file and directory ACLs as Discretionary Access Control Lists (DACLs).[3] Similar to a standard ACL, DACLs identifies the accounts that are allowed or denied access to a securable object. When an attempt is made to access a securable object, the system checks the access control entries in the DACL in order. If a matching entry is found, access to the object is granted. Otherwise, access is denied.[4]

Adversaries can interact with the DACLs using built-in Windows commands, such as `icacls`, `cacls`, `takeown`, and `attrib`, which can grant adversaries higher permissions on specific files and folders. Further, PowerShell provides cmdlets that can be used to retrieve or modify file and directory DACLs. Specific file and directory modifications may be a required step for many techniques, such as establishing Persistence via Accessibility Features, Boot or Logon Initialization Scripts, or tainting/hijacking other instrumental binary/configuration files via Hijack Execution Flow.

Adversaries may use Valid Accounts to interact with remote systems using Windows Remote Management (WinRM). The adversary may then perform actions as the logged-on user.

WinRM is the name of both a Windows service and a protocol that allows a user to interact with a remote system (e.g., run an executable, modify the Registry, modify services).[1] It may be called with the `winrm` command or by any number of programs such as PowerShell.[2] WinRM can be used as a method of remotely interacting with Windows Management Instrumentation.[3]

Adversaries may create or modify Windows services to repeatedly execute malicious payloads as part of persistence. When Windows boots up, it starts programs or applications called services that perform background system functions.[1] Windows service configuration information, including the file path to the service's executable or recovery programs/commands, is stored in the Windows Registry.

Adversaries may install a new service or modify an existing service to execute at startup in order to persist on a system. Service configurations can be set or modified using system utilities (such as sc.exe), by directly modifying the Registry, or by interacting directly with the Windows API.

Adversaries may also use services to install and execute malicious drivers. For example, after dropping a driver file (ex: `.sys`) to disk, the payload can be loaded and registered via Native API functions such as `CreateServiceW()` (or manually via functions such as `ZwLoadDriver()` and `ZwSetValueKey()`), by creating the required service Registry values (i.e. Modify Registry), or by using command-line utilities such as `PnPUtil.exe`.[2][3][4] Adversaries may leverage these drivers as Rootkits to hide the presence of malicious activity on a system. Adversaries may also load a signed yet vulnerable driver onto a compromised machine (known as "Bring Your Own Vulnerable Driver" (BYOVD)) as part of Exploitation for Privilege Escalation.[5][4]

Services may be created with administrator privileges but are executed under SYSTEM privileges, so an adversary may also use a service to escalate privileges. Adversaries may also directly start services through Service Execution.

To make detection analysis more challenging, malicious services may also incorporate Masquerade Task or Service (ex: using a service and/or payload name related to a legitimate OS or benign software component). Adversaries may also create ‘hidden’ services (i.e., Hide Artifacts), for example by using the `sc sdset` command to set service permissions via the Service Descriptor Definition Language (SDDL). This may hide a Windows service from the view of standard service enumeration methods such as `Get-Service`, `sc query`, and `services.exe`.[6][7]

Adversaries may abuse features of Winlogon to execute DLLs and/or executables when a user logs in. Winlogon.exe is a Windows component responsible for actions at logon/logoff as well as the secure attention sequence (SAS) triggered by Ctrl-Alt-Delete. Registry entries in HKLM\Software[\\Wow6432Node\\]\Microsoft\Windows NT\CurrentVersion\Winlogon\ and HKCU\Software\Microsoft\Windows NT\CurrentVersion\Winlogon\ are used to manage additional helper programs and functionalities that support Winlogon.[1]

Malicious modifications to these Registry keys may cause Winlogon to load and execute malicious DLLs and/or executables. Specifically, the following subkeys have been known to be possibly vulnerable to abuse: [1]

* Winlogon\Notify - points to notification package DLLs that handle Winlogon events * Winlogon\Userinit - points to userinit.exe, the user initialization program executed when a user logs on * Winlogon\Shell - points to explorer.exe, the system shell executed when a user logs on

Adversaries may take advantage of these features to repeatedly execute malicious code and establish persistence.

Adversaries may iteratively probe infrastructure using brute-forcing and crawling techniques. While this technique employs similar methods to Brute Force, its goal is the identification of content and infrastructure rather than the discovery of valid credentials. Wordlists used in these scans may contain generic, commonly used names and file extensions or terms specific to a particular software. Adversaries may also create custom, target-specific wordlists using data gathered from other Reconnaissance techniques (ex: Gather Victim Org Information, or Search Victim-Owned Websites).

For example, adversaries may use web content discovery tools such as Dirb, DirBuster, and GoBuster and generic or custom wordlists to enumerate a website’s pages and directories.[1] This can help them to discover old, vulnerable pages or hidden administrative portals that could become the target of further operations (ex: Exploit Public-Facing Application or Brute Force).

As cloud storage solutions typically use globally unique names, adversaries may also use target-specific wordlists and tools such as s3recon and GCPBucketBrute to enumerate public and private buckets on cloud infrastructure.[2][3] Once storage objects are discovered, adversaries may leverage Data from Cloud Storage to access valuable information that can be exfiltrated or used to escalate privileges and move laterally.

Adversaries may create or tailor written materials to support targeting and malicious operations. Content may include phishing lures, fraudulent financial communications, fabricated job postings, fabricated employment credentials and documentation, decoy documents, social media persona content, and supporting narratives used to sustain fabricated personas over time.[1][2] Content may be authored manually, commissioned through third parties, or produced using AI-assisted tools.

Written materials may impersonate legitimate government correspondence, diplomatic communications, or internal organizational documents to support targeting efforts. AI-assisted tools may also be used to tailor content to specific targets, industries, or regions. For example, adversaries may leverage AI to translate content into a target's native language or mimic the communication style of trusted senders.

Written content produced through these methods may be used in support of other techniques, such as Phishing, Spearphishing via Service, Phishing for Information, Internal Spearphishing, Social Engineering, Financial Theft, or Establish Accounts.

Written content does not include malicious code or scripts; for development of malicious code and scripts, see Develop Capabilities.

Adversaries may add or modify XDG Autostart Entries to execute malicious programs or commands when a user’s desktop environment is loaded at login. XDG Autostart entries are available for any XDG-compliant Linux system. XDG Autostart entries use Desktop Entry files (`.desktop`) to configure the user’s desktop environment upon user login. These configuration files determine what applications launch upon user login, define associated applications to open specific file types, and define applications used to open removable media.[1][2]

Adversaries may abuse this feature to establish persistence by adding a path to a malicious binary or command to the `Exec` directive in the `.desktop` configuration file. When the user’s desktop environment is loaded at user login, the `.desktop` files located in the XDG Autostart directories are automatically executed. System-wide Autostart entries are located in the `/etc/xdg/autostart` directory while the user entries are located in the `~/.config/autostart` directory.

Adversaries may combine this technique with Masquerading to blend malicious Autostart entries with legitimate programs.[3]

Adversaries can provide malicious content to an XPC service daemon for local code execution. macOS uses XPC services for basic inter-process communication between various processes, such as between the XPC Service daemon and third-party application privileged helper tools. Applications can send messages to the XPC Service daemon, which runs as root, using the low-level XPC Service C API or the high level NSXPCConnection API in order to handle tasks that require elevated privileges (such as network connections). Applications are responsible for providing the protocol definition which serves as a blueprint of the XPC services. Developers typically use XPC Services to provide applications stability and privilege separation between the application client and the daemon.[1][2]

Adversaries can abuse XPC services to execute malicious content. Requests for malicious execution can be passed through the application's XPC Services handler.[3][4] This may also include identifying and abusing improper XPC client validation and/or poor sanitization of input parameters to conduct Exploitation for Privilege Escalation.

Adversaries may abuse vSphere Installation Bundles (VIBs) to establish persistent access to ESXi hypervisors. VIBs are collections of files used for software distribution and virtual system management in VMware environments. Since ESXi uses an in-memory filesystem where changes made to most files are stored in RAM rather than in persistent storage, these modifications are lost after a reboot. However, VIBs can be used to create startup tasks, apply custom firewall rules, or deploy binaries that persist across reboots. Typically, administrators use VIBs for updates and system maintenance.

VIBs can be broken down into three components:[1]

* VIB payload: a `.vgz` archive containing the directories and files to be created and executed on boot when the VIBs are loaded. * Signature file: verifies the host acceptance level of a VIB, indicating what testing and validation has been done by VMware or its partners before publication of a VIB. By default, ESXi hosts require a minimum acceptance level of PartnerSupported for VIB installation, meaning the VIB is published by a trusted VMware partner. However, privileged users can change the default acceptance level using the `esxcli` command line interface. Additionally, VIBs are able to be installed regardless of acceptance level by using the esxcli software vib install --force command. * XML descriptor file: a configuration file containing associated VIB metadata, such as the name of the VIB and its dependencies.

Adversaries may leverage malicious VIB packages to maintain persistent access to ESXi hypervisors, allowing system changes to be executed upon each bootup of ESXi – such as using `esxcli` to enable firewall rules for backdoor traffic, creating listeners on hard coded ports, and executing backdoors.[2] Adversaries may also masquerade their malicious VIB files as PartnerSupported by modifying the XML descriptor file.[2]