T1686.002: Network Device Firewall
Adversaries may disable network device-based firewall mechanisms entirely or add, delete, or modify particular rules in order to bypass controls limiting network usage.
Adversaries may obtain access to devices such as routers, switches, or other perimeter/network devices and change access control lists (ACLs), security zones, or policy rules to permit otherwise blocked traffic. For example, adversaries may add new network firewall rules to allow access to all internal network subnets without restrictions. Allowing access to internal network subsets may enable unrestricted inbound/outbound connectivity or open paths for command and control and lateral movement.
Adversaries may obtain access to network device management interfaces via Valid Accounts or by exploiting vulnerabilities. In some cases, threat actors may target firewalls and other network infrastructure that are exposed to the internet by leveraging weaknesses in public-facing applications (Exploit Public-Facing Application).[1]
Adversaries may also modify host networking configurations that indirectly manipulate system firewalls, such as adjusting interface bandwidth or network connection request thresholds.
Security context for executives and security teams
T1686.002: Network Device Firewall describes Adversaries may disable network device-based firewall mechanisms entirely or add, delete, or modify particular rules in order to bypass controls limiting network usage. Adversaries may obtain access to devices such as routers, switches, or other perimeter/network devices and change access control lists (ACLs), security zones, or policy rules to permit otherwise blocked traffic. For example, adversaries may add new network firewall rules to allow access to all internal network subnets without restrictions. Allowing ...
Executive priority
T1686.002: Network Device Firewall is an official MITRE ATT&CK technique. Glexia treats it as defensive behavior context for prioritizing monitoring, control validation, and response planning without using the object by itself as an attribution claim.
Technical view
Security teams should validate T1686.002: Network Device Firewall by reviewing the official ATT&CK relationships, mapped tactics (defense-impairment), supported platforms (Network Devices), and available local telemetry before making detection or mitigation decisions.
Likely telemetry
- Official ATT&CK relationships and object metadata
- Identity, privilege, and authentication events
- Network, endpoint, and security-tool telemetry
Detection direction
- Validate whether T1686.002: Network Device Firewall appears in your detection coverage and tabletop scenarios.
- Use the object to align executive risk language with SOC, incident response, and detection engineering work.
- Do not treat ATT&CK relationship context as attribution without corroborating evidence.
Mitigation priorities
- Map the object to existing controls and identify missing telemetry or response ownership.
- Prioritize mitigations that reduce exposure on the listed platforms and tactics.
- Review adjacent ATT&CK relationships before changing policy, detections, or reporting language.
Additional notes and limits
Baseline Glexia take generated from the official MITRE ATT&CK STIX object, source hash, tactics, platforms, and detection fields. It is safe to replace with a richer model-generated take for the same source hash later.
This baseline take is source-grounded and schema-validated, but it does not include environment-specific telemetry, incident evidence, or threat-intelligence corroboration.
Generated from the cited source records. This long-tail analysis has not been individually reviewed by a named human.
Network Device Firewall
Adversaries may disable network device-based firewall mechanisms entirely or add, delete, or modify particular rules in order to bypass controls limiting network usage.
Adversaries may obtain access to devices such as routers, switches, or other perimeter/network devices and change access control lists (ACLs), security zones, or policy rules to permit otherwise blocked traffic. For example, adversaries may add new network firewall rules to allow access to all internal network subnets without restrictions. Allowing access to internal network subsets may enable unrestricted inbound/outbound connectivity or open paths for command and control and lateral movement.
Adversaries may obtain access to network device management interfaces via Valid Accounts or by exploiting vulnerabilities. In some cases, threat actors may target firewalls and other network infrastructure that are exposed to the internet by leveraging weaknesses in public-facing applications (Exploit Public-Facing Application).[1]
Adversaries may also modify host networking configurations that indirectly manipulate system firewalls, such as adjusting interface bandwidth or network connection request thresholds.
How security teams should use this page
Treat this object as behavior context, not an attribution claim. Validate the related groups, software, data sources, and mitigations against official ATT&CK relationships and your own telemetry before making control-coverage decisions.
Related techniques
This mirrors the MITRE pattern of making group, software, campaign, and technique relationships scannable. Relationship notes come from mirrored ATT&CK relationship text when available.
| Domain | ID | Name | Relationship / procedure |
|---|---|---|---|
| Enterprise | T1562.013 | Disable or Modify Network Device FirewallSub-technique | Disable or Modify Network Device Firewall revoked by this object. |
| Enterprise | T1686 | Disable or Modify System Firewall | This object subtechnique of Disable or Modify System Firewall. |
Groups, software, and campaigns
G0082: APT38
APT38 is a North Korean state-sponsored threat group that specializes in financial cyber operations; it has been attributed to the Reconnaissance General Bureau.[1] Active since at least 2014, APT38 has targeted banks, financial institutions, casinos, cryptocurrency exchanges, SWIFT system endpoints, and ATMs in at least 38 countries worldwide. Significant operations include the 2016 Bank of Bangladesh heist, during which APT38 stole $81 million, as well as attacks against Bancomext [2] and Banco de Chile [2]; some of their attacks have been destructive.[1][2][3][4]
North Korean group definitions are known to have significant overlap, and some security researchers report all North Korean state-sponsored cyber activity under the name Lazarus Group instead of tracking clusters or subgroups.
S0531: Grandoreiro
Grandoreiro is a banking trojan written in Delphi that was first observed in 2016 and uses a Malware-as-a-Service (MaaS) business model. Grandoreiro has confirmed victims in Brazil, Mexico, Portugal, and Spain.[1][2]
S0687: Cyclops Blink
Cyclops Blink is a modular malware that has been used in widespread campaigns by Sandworm Team since at least 2019 to target Small/Home Office (SOHO) network devices, including WatchGuard and Asus. Cyclops Blink is assessed to be a replacement for VPNFilter, a similar platform targeting network devices.[1][2][3]
C0063: 2025 Poland Wiper Attacks
2025 Poland Wiper Attacks is a Russian state-sponsored campaign that conducted destructive cyberattacks against Polish energy infrastructure in December 2025. Targets included more than 30 wind and photovoltaic farms, a combined heat and power (CHP) plant, and a manufacturing sector company. The attacks on the distributed energy resources (DER) disrupted communications between affected facilities and the distribution system operator, but did not impact electricity generation or heat supply. Across the campaign, threat actors deployed two previously undocumented wiper tools, DynoWiper, a Windows-based wiper and LazyWiper, a PowerShell wiper, distributed via malicious Group Policy Objects. At the CHP plant, threat actors had maintained access since at least March 2025, using that foothold to obtain credentials and move laterally before attempting wiper deployment. Some reporting has assessed the activity to be consistent with Russian Federal Security Service (FSB) threat activity group Dragonfly, also tracked as STATIC TUNDRA, while other reporting attributes the destructive wiper activities to the Russian General Staff Main Intelligence Directorate (GRU) threat activity group ELECTRUM, also tracked as Sandworm Team.[1][2][3][4]
All related ATT&CK context
Mitigation direction
Object version and sync metadata
The fields below describe the current mirrored snapshot. When Glexia retains multiple ATT&CK source imports, you can open the table to compare the same object across releases (hashes and MITRE timestamps). For MITRE’s own release notes and roadmap, see ATT&CK resources — Updates.
Imported snapshots across ATT&CK releases(2)
| Release | Bundle imported | Object version | Modified | Status | Raw hash |
|---|---|---|---|---|---|
| 19.2 | 1.0 | Current bundle | 0f47c766c11a… | ||
| 19.1 | 1.0 | Older bundle | 0f47c766c11a… |
Mirrored ATT&CK source object
The raw object is retained through the mirrored ATT&CK source bundle and object hash. The raw endpoint returns the exact object from the mirrored bundle when available.
External references and citations
MITRE external references are preserved separately from Glexia analysis so citations remain traceable to their original source records.
- [1]CVE-2024-55591 Detail
NIST NVD. (2025, January 22). Retrieved September 22, 2025.
Open source URL - [2]mitre-attackT1686.002Open source URL
Source: MITRE ATT&CK®. © 2026 The MITRE Corporation. This work is reproduced and distributed with the permission of The MITRE Corporation. MITRE ATT&CK and ATT&CK are registered trademarks of The MITRE Corporation. Glexia is not affiliated with or endorsed by MITRE.