High · CVSS 8.8
Snipe-IT versions prior to 8.3.7 contain sensitive user attributes related to account privileges that are insufficiently protected against mass assignment. An authenticated, low-privileged user can craft a malicious API request to modify restricted fields of another user account, including the Super Admin account. By changing the email address of the Super Admin and triggering a password reset, an attacker can fully take over the Super Admin account, resulting in complete administrative control of the Snipe-IT instance.
Published Mar 6, 2026 · Updated Jul 14, 2026
High · CVSS 7.7
Invoice Ninja is vulnerable to authenticated Server-Side Request Forgery (SSRF) allowing for arbitrary file read and network resource requests as the application user.
This issue affects Invoice Ninja: from 5.8.56 through 5.11.23.
Published Jan 14, 2025 · Updated Jul 14, 2026
Low · CVSS 3.4
An Improper Neutralization of CRLF Sequences in HTTP Headers ('HTTP Response Splitting') vulnerability [CWE-113] vulnerability in Fortinet FortiOS 7.6.0 through 7.6.4, FortiOS 7.4 all versions, FortiOS 7.2 all versions, FortiProxy 7.6.0 through 7.6.4, FortiProxy 7.4 all versions, FortiProxy 7.2 all versions may allow an attacker in possession of a valid web filter override token to inject arbitrary headers via tricking a user into clicking on a crafted link.
Published Jul 14, 2026 · Updated Jul 14, 2026
Low · CVSS 3.1
An Improper Neutralization of CRLF Sequences in HTTP Headers ('HTTP Response Splitting') vulnerability [CWE-113] vulnerability in Fortinet FortiOS 7.6.0 through 7.6.4, FortiOS 7.4 all versions, FortiOS 7.2 all versions, FortiProxy 7.6.0 through 7.6.4, FortiProxy 7.4 all versions, FortiProxy 7.2 all versions may allow an attacker able to intercept and modify a user's captive portal authentication request to inject arbitrary headers via crafted HTTP requests.
Published Jul 14, 2026 · Updated Jul 14, 2026
Critical · CVSS 9.2
A denial-of-service issue exists in 5380/5480/5580 controllers boot firmware lower than version 1.072. This vulnerability could potentially allow a malicious user to write invalid file data to the controller, causing the device to enter a major non-recoverable fault (MNRF).
Published Jul 14, 2026 · Updated Jul 14, 2026
Critical · CVSS 9.2
A denial-of-service issue exists in 5370/5570 controllers. This vulnerability could potentially allow a remote user to load an invalid project, causing the device to enter a major non-recoverable fault (MNRF).
Published Jul 14, 2026 · Updated Jul 14, 2026
Critical · CVSS 9.2
A denial-of-service issue exists in 5380/5480/5580 controllers. This vulnerability could potentially allow a malicious user to write invalid file data to the controller, causing the device to enter a major non-recoverable fault (MNRF).
Published Jul 14, 2026 · Updated Jul 14, 2026
Medium · CVSS 4.9
The Catalyst Connect Zoho CRM Client Portal plugin for WordPress is vulnerable to time-based SQL Injection via the ‘uid’ parameter in all versions up to, and including, 2.2.0 due to insufficient escaping on the user supplied parameter and lack of sufficient preparation on the existing SQL query. This makes it possible for authenticated attackers, with Administrator-level access and above, to append additional SQL queries into already existing queries that can be used to extract sensitive information from the database.
Published Jul 11, 2026 · Updated Jul 14, 2026
Medium · CVSS 5.4
The Ultimate Before After Image Slider & Gallery WordPress plugin before 4.7.1 does not escape the value of the BEAF Slider widget's shortcode field before outputting it on the front end (the value is passed through do_shortcode, which echoes non-shortcode content verbatim), allowing users with administrator-level access to store a script that executes in the browser of any visitor who loads a page displaying the widget.
Published Jul 14, 2026 · Updated Jul 14, 2026
Unknown · CVSS Not scored
In the Linux kernel, the following vulnerability has been resolved:
fs: ntfs3: fix infinite loop triggered by zero-sized ATTR_LIST
We found an infinite loop bug in the ntfs3 file system that can lead to a
Denial-of-Service (DoS) condition.
A malformed NTFS image can cause an infinite loop when an ATTR_LIST attribute
indicates a zero data size while the driver allocates memory for it.
When ntfs_load_attr_list() processes a resident ATTR_LIST with data_size set
to zero, it still allocates memory because of al_aligned(0). This creates an
inconsistent state where ni->attr_list.size is zero, but ni->attr_list.le is
non-null. This causes ni_enum_attr_ex to incorrectly assume that no attribute
list exists and enumerates only the primary MFT record. When it finds
ATTR_LIST, the code reloads it and restarts the enumeration, repeating
indefinitely. The mount operation never completes, hanging the kernel thread.
This patch adds validation to ensure that data_size is non-zero before memory
allocation. When a zero-sized ATTR_LIST is detected, the function returns
-EINVAL, preventing a DoS vulnerability.
Published Mar 18, 2026 · Updated Jul 14, 2026
Unknown · CVSS Not scored
In the Linux kernel, the following vulnerability has been resolved:
fs: ntfs3: check return value of indx_find to avoid infinite loop
We found an infinite loop bug in the ntfs3 file system that can lead to a
Denial-of-Service (DoS) condition.
A malformed dentry in the ntfs3 filesystem can cause the kernel to hang
during the lookup operations. By setting the HAS_SUB_NODE flag in an
INDEX_ENTRY within a directory's INDEX_ALLOCATION block and manipulating the
VCN pointer, an attacker can cause the indx_find() function to repeatedly
read the same block, allocating 4 KB of memory each time. The kernel lacks
VCN loop detection and depth limits, causing memory exhaustion and an OOM
crash.
This patch adds a return value check for fnd_push() to prevent a memory
exhaustion vulnerability caused by infinite loops. When the index exceeds the
size of the fnd->nodes array, fnd_push() returns -EINVAL. The indx_find()
function checks this return value and stops processing, preventing further
memory allocation.
Published Mar 18, 2026 · Updated Jul 14, 2026
Unknown · CVSS Not scored
In the Linux kernel, the following vulnerability has been resolved:
fs: ntfs3: fix infinite loop in attr_load_runs_range on inconsistent metadata
We found an infinite loop bug in the ntfs3 file system that can lead to a
Denial-of-Service (DoS) condition.
A malformed NTFS image can cause an infinite loop when an attribute header
indicates an empty run list, while directory entries reference it as
containing actual data. In NTFS, setting evcn=-1 with svcn=0 is a valid way
to represent an empty run list, and run_unpack() correctly handles this by
checking if evcn + 1 equals svcn and returning early without parsing any run
data. However, this creates a problem when there is metadata inconsistency,
where the attribute header claims to be empty (evcn=-1) but the caller
expects to read actual data. When run_unpack() immediately returns success
upon seeing this condition, it leaves the runs_tree uninitialized with
run->runs as a NULL. The calling function attr_load_runs_range() assumes
that a successful return means that the runs were loaded and sets clen to 0,
expecting the next run_lookup_entry() call to succeed. Because runs_tree
remains uninitialized, run_lookup_entry() continues to fail, and the loop
increments vcn by zero (vcn += 0), leading to an infinite loop.
This patch adds a retry counter to detect when run_lookup_entry() fails
consecutively after attr_load_runs_vcn(). If the run is still not found on
the second attempt, it indicates corrupted metadata and returns -EINVAL,
preventing the Denial-of-Service (DoS) vulnerability.
Published Mar 18, 2026 · Updated Jul 14, 2026
Unknown · CVSS Not scored
In the Linux kernel, the following vulnerability has been resolved:
dmaengine: mmp_pdma: Fix race condition in mmp_pdma_residue()
Add proper locking in mmp_pdma_residue() to prevent use-after-free when
accessing descriptor list and descriptor contents.
The race occurs when multiple threads call tx_status() while the tasklet
on another CPU is freeing completed descriptors:
CPU 0 CPU 1
----- -----
mmp_pdma_tx_status()
mmp_pdma_residue()
-> NO LOCK held
list_for_each_entry(sw, ..)
DMA interrupt
dma_do_tasklet()
-> spin_lock(&desc_lock)
list_move(sw->node, ...)
spin_unlock(&desc_lock)
| dma_pool_free(sw) <- FREED!
-> access sw->desc <- UAF!
This issue can be reproduced when running dmatest on the same channel with
multiple threads (threads_per_chan > 1).
Fix by protecting the chain_running list iteration and descriptor access
with the chan->desc_lock spinlock.
Published Feb 14, 2026 · Updated Jul 14, 2026
Unknown · CVSS Not scored
In the Linux kernel, the following vulnerability has been resolved:
w1: therm: Fix off-by-one buffer overflow in alarms_store
The sysfs buffer passed to alarms_store() is allocated with 'size + 1'
bytes and a NUL terminator is appended. However, the 'size' argument
does not account for this extra byte. The original code then allocated
'size' bytes and used strcpy() to copy 'buf', which always writes one
byte past the allocated buffer since strcpy() copies until the NUL
terminator at index 'size'.
Fix this by parsing the 'buf' parameter directly using simple_strtoll()
without allocating any intermediate memory or string copying. This
removes the overflow while simplifying the code.
Published Feb 4, 2026 · Updated Jul 14, 2026
Unknown · CVSS Not scored
In the Linux kernel, the following vulnerability has been resolved:
dmaengine: at_hdmac: fix device leak on of_dma_xlate()
Make sure to drop the reference taken when looking up the DMA platform
device during of_dma_xlate() when releasing channel resources.
Note that commit 3832b78b3ec2 ("dmaengine: at_hdmac: add missing
put_device() call in at_dma_xlate()") fixed the leak in a couple of
error paths but the reference is still leaking on successful allocation.
Published Jan 31, 2026 · Updated Jul 14, 2026
Unknown · CVSS Not scored
In the Linux kernel, the following vulnerability has been resolved:
dmaengine: bcm-sba-raid: fix device leak on probe
Make sure to drop the reference taken when looking up the mailbox device
during probe on probe failures and on driver unbind.
Published Jan 31, 2026 · Updated Jul 14, 2026
Unknown · CVSS Not scored
In the Linux kernel, the following vulnerability has been resolved:
dmaengine: dw: dmamux: fix OF node leak on route allocation failure
Make sure to drop the reference taken to the DMA master OF node also on
late route allocation failures.
Published Jan 31, 2026 · Updated Jul 14, 2026
Unknown · CVSS Not scored
In the Linux kernel, the following vulnerability has been resolved:
dmaengine: stm32: dmamux: fix device leak on route allocation
Make sure to drop the reference taken when looking up the DMA mux
platform device during route allocation.
Note that holding a reference to a device does not prevent its driver
data from going away so there is no point in keeping the reference.
Published Jan 31, 2026 · Updated Jul 14, 2026
Unknown · CVSS Not scored
In the Linux kernel, the following vulnerability has been resolved:
dmaengine: ti: dma-crossbar: fix device leak on am335x route allocation
Make sure to drop the reference taken when looking up the crossbar
platform device during am335x route allocation.
Published Jan 31, 2026 · Updated Jul 14, 2026
Unknown · CVSS Not scored
In the Linux kernel, the following vulnerability has been resolved:
dmaengine: idxd: fix device leaks on compat bind and unbind
Make sure to drop the reference taken when looking up the idxd device as
part of the compat bind and unbind sysfs interface.
Published Jan 25, 2026 · Updated Jul 14, 2026
Unknown · CVSS Not scored
In the Linux kernel, the following vulnerability has been resolved:
dmaengine: tegra-adma: Fix use-after-free
A use-after-free bug exists in the Tegra ADMA driver when audio streams
are terminated, particularly during XRUN conditions. The issue occurs
when the DMA buffer is freed by tegra_adma_terminate_all() before the
vchan completion tasklet finishes accessing it.
The race condition follows this sequence:
1. DMA transfer completes, triggering an interrupt that schedules the
completion tasklet (tasklet has not executed yet)
2. Audio playback stops, calling tegra_adma_terminate_all() which
frees the DMA buffer memory via kfree()
3. The scheduled tasklet finally executes, calling vchan_complete()
which attempts to access the already-freed memory
Since tasklets can execute at any time after being scheduled, there is
no guarantee that the buffer will remain valid when vchan_complete()
runs.
Fix this by properly synchronizing the virtual channel completion:
- Calling vchan_terminate_vdesc() in tegra_adma_stop() to mark the
descriptors as terminated instead of freeing the descriptor.
- Add the callback tegra_adma_synchronize() that calls
vchan_synchronize() which kills any pending tasklets and frees any
terminated descriptors.
Crash logs:
[ 337.427523] BUG: KASAN: use-after-free in vchan_complete+0x124/0x3b0
[ 337.427544] Read of size 8 at addr ffff000132055428 by task swapper/0/0
[ 337.427562] Call trace:
[ 337.427564] dump_backtrace+0x0/0x320
[ 337.427571] show_stack+0x20/0x30
[ 337.427575] dump_stack_lvl+0x68/0x84
[ 337.427584] print_address_description.constprop.0+0x74/0x2b8
[ 337.427590] kasan_report+0x1f4/0x210
[ 337.427598] __asan_load8+0xa0/0xd0
[ 337.427603] vchan_complete+0x124/0x3b0
[ 337.427609] tasklet_action_common.constprop.0+0x190/0x1d0
[ 337.427617] tasklet_action+0x30/0x40
[ 337.427623] __do_softirq+0x1a0/0x5c4
[ 337.427628] irq_exit+0x110/0x140
[ 337.427633] handle_domain_irq+0xa4/0xe0
[ 337.427640] gic_handle_irq+0x64/0x160
[ 337.427644] call_on_irq_stack+0x20/0x4c
[ 337.427649] do_interrupt_handler+0x7c/0x90
[ 337.427654] el1_interrupt+0x30/0x80
[ 337.427659] el1h_64_irq_handler+0x18/0x30
[ 337.427663] el1h_64_irq+0x7c/0x80
[ 337.427667] cpuidle_enter_state+0xe4/0x540
[ 337.427674] cpuidle_enter+0x54/0x80
[ 337.427679] do_idle+0x2e0/0x380
[ 337.427685] cpu_startup_entry+0x2c/0x70
[ 337.427690] rest_init+0x114/0x130
[ 337.427695] arch_call_rest_init+0x18/0x24
[ 337.427702] start_kernel+0x380/0x3b4
[ 337.427706] __primary_switched+0xc0/0xc8
Published Jan 25, 2026 · Updated Jul 14, 2026
Unknown · CVSS Not scored
In the Linux kernel, the following vulnerability has been resolved:
dm-verity: disable recursive forward error correction
There are two problems with the recursive correction:
1. It may cause denial-of-service. In fec_read_bufs, there is a loop that
has 253 iterations. For each iteration, we may call verity_hash_for_block
recursively. There is a limit of 4 nested recursions - that means that
there may be at most 253^4 (4 billion) iterations. Red Hat QE team
actually created an image that pushes dm-verity to this limit - and this
image just makes the udev-worker process get stuck in the 'D' state.
2. It doesn't work. In fec_read_bufs we store data into the variable
"fio->bufs", but fio bufs is shared between recursive invocations, if
"verity_hash_for_block" invoked correction recursively, it would
overwrite partially filled fio->bufs.
Published Jan 23, 2026 · Updated Jul 14, 2026
Unknown · CVSS Not scored
In the Linux kernel, the following vulnerability has been resolved:
crypto: seqiv - Do not use req->iv after crypto_aead_encrypt
As soon as crypto_aead_encrypt is called, the underlying request
may be freed by an asynchronous completion. Thus dereferencing
req->iv after it returns is invalid.
Instead of checking req->iv against info, create a new variable
unaligned_info and use it for that purpose instead.
Published Jan 14, 2026 · Updated Jul 14, 2026
Unknown · CVSS Not scored
In the Linux kernel, the following vulnerability has been resolved:
ext4: fix string copying in parse_apply_sb_mount_options()
strscpy_pad() can't be used to copy a non-NUL-term string into a NUL-term
string of possibly bigger size. Commit 0efc5990bca5 ("string.h: Introduce
memtostr() and memtostr_pad()") provides additional information in that
regard. So if this happens, the following warning is observed:
strnlen: detected buffer overflow: 65 byte read of buffer size 64
WARNING: CPU: 0 PID: 28655 at lib/string_helpers.c:1032 __fortify_report+0x96/0xc0 lib/string_helpers.c:1032
Modules linked in:
CPU: 0 UID: 0 PID: 28655 Comm: syz-executor.3 Not tainted 6.12.54-syzkaller-00144-g5f0270f1ba00 #0
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
RIP: 0010:__fortify_report+0x96/0xc0 lib/string_helpers.c:1032
Call Trace:
<TASK>
__fortify_panic+0x1f/0x30 lib/string_helpers.c:1039
strnlen include/linux/fortify-string.h:235 [inline]
sized_strscpy include/linux/fortify-string.h:309 [inline]
parse_apply_sb_mount_options fs/ext4/super.c:2504 [inline]
__ext4_fill_super fs/ext4/super.c:5261 [inline]
ext4_fill_super+0x3c35/0xad00 fs/ext4/super.c:5706
get_tree_bdev_flags+0x387/0x620 fs/super.c:1636
vfs_get_tree+0x93/0x380 fs/super.c:1814
do_new_mount fs/namespace.c:3553 [inline]
path_mount+0x6ae/0x1f70 fs/namespace.c:3880
do_mount fs/namespace.c:3893 [inline]
__do_sys_mount fs/namespace.c:4103 [inline]
__se_sys_mount fs/namespace.c:4080 [inline]
__x64_sys_mount+0x280/0x300 fs/namespace.c:4080
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0x64/0x140 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x76/0x7e
Since userspace is expected to provide s_mount_opts field to be at most 63
characters long with the ending byte being NUL-term, use a 64-byte buffer
which matches the size of s_mount_opts, so that strscpy_pad() does its job
properly. Return with error if the user still managed to provide a
non-NUL-term string here.
Found by Linux Verification Center (linuxtesting.org) with Syzkaller.
Published Jan 14, 2026 · Updated Jul 14, 2026
Unknown · CVSS Not scored
In the Linux kernel, the following vulnerability has been resolved:
SUNRPC: svcauth_gss: avoid NULL deref on zero length gss_token in gss_read_proxy_verf
A zero length gss_token results in pages == 0 and in_token->pages[0]
is NULL. The code unconditionally evaluates
page_address(in_token->pages[0]) for the initial memcpy, which can
dereference NULL even when the copy length is 0. Guard the first
memcpy so it only runs when length > 0.
Published Jan 14, 2026 · Updated Jul 14, 2026
Unknown · CVSS Not scored
In the Linux kernel, the following vulnerability has been resolved:
via_wdt: fix critical boot hang due to unnamed resource allocation
The VIA watchdog driver uses allocate_resource() to reserve a MMIO
region for the watchdog control register. However, the allocated
resource was not given a name, which causes the kernel resource tree
to contain an entry marked as "<BAD>" under /proc/iomem on x86
platforms.
During boot, this unnamed resource can lead to a critical hang because
subsequent resource lookups and conflict checks fail to handle the
invalid entry properly.
Published Jan 14, 2026 · Updated Jul 14, 2026
Unknown · CVSS Not scored
In the Linux kernel, the following vulnerability has been resolved:
crypto: af_alg - zero initialize memory allocated via sock_kmalloc
Several crypto user API contexts and requests allocated with
sock_kmalloc() were left uninitialized, relying on callers to
set fields explicitly. This resulted in the use of uninitialized
data in certain error paths or when new fields are added in the
future.
The ACVP patches also contain two user-space interface files:
algif_kpp.c and algif_akcipher.c. These too rely on proper
initialization of their context structures.
A particular issue has been observed with the newly added
'inflight' variable introduced in af_alg_ctx by commit:
67b164a871af ("crypto: af_alg - Disallow multiple in-flight AIO requests")
Because the context is not memset to zero after allocation,
the inflight variable has contained garbage values. As a result,
af_alg_alloc_areq() has incorrectly returned -EBUSY randomly when
the garbage value was interpreted as true:
https://github.com/gregkh/linux/blame/master/crypto/af_alg.c#L1209
The check directly tests ctx->inflight without explicitly
comparing against true/false. Since inflight is only ever set to
true or false later, an uninitialized value has triggered
-EBUSY failures. Zero-initializing memory allocated with
sock_kmalloc() ensures inflight and other fields start in a known
state, removing random issues caused by uninitialized data.
Published Jan 14, 2026 · Updated Jul 14, 2026
Unknown · CVSS Not scored
In the Linux kernel, the following vulnerability has been resolved:
net: hns3: add VLAN id validation before using
Currently, the VLAN id may be used without validation when
receive a VLAN configuration mailbox from VF. The length of
vlan_del_fail_bmap is BITS_TO_LONGS(VLAN_N_VID). It may cause
out-of-bounds memory access once the VLAN id is bigger than
or equal to VLAN_N_VID.
Therefore, VLAN id needs to be checked to ensure it is within
the range of VLAN_N_VID.
Published Jan 14, 2026 · Updated Jul 14, 2026
Unknown · CVSS Not scored
In the Linux kernel, the following vulnerability has been resolved:
KVM: x86: Fix VM hard lockup after prolonged inactivity with periodic HV timer
When advancing the target expiration for the guest's APIC timer in periodic
mode, set the expiration to "now" if the target expiration is in the past
(similar to what is done in update_target_expiration()). Blindly adding
the period to the previous target expiration can result in KVM generating
a practically unbounded number of hrtimer IRQs due to programming an
expired timer over and over. In extreme scenarios, e.g. if userspace
pauses/suspends a VM for an extended duration, this can even cause hard
lockups in the host.
Currently, the bug only affects Intel CPUs when using the hypervisor timer
(HV timer), a.k.a. the VMX preemption timer. Unlike the software timer,
a.k.a. hrtimer, which KVM keeps running even on exits to userspace, the
HV timer only runs while the guest is active. As a result, if the vCPU
does not run for an extended duration, there will be a huge gap between
the target expiration and the current time the vCPU resumes running.
Because the target expiration is incremented by only one period on each
timer expiration, this leads to a series of timer expirations occurring
rapidly after the vCPU/VM resumes.
More critically, when the vCPU first triggers a periodic HV timer
expiration after resuming, advancing the expiration by only one period
will result in a target expiration in the past. As a result, the delta
may be calculated as a negative value. When the delta is converted into
an absolute value (tscdeadline is an unsigned u64), the resulting value
can overflow what the HV timer is capable of programming. I.e. the large
value will exceed the VMX Preemption Timer's maximum bit width of
cpu_preemption_timer_multi + 32, and thus cause KVM to switch from the
HV timer to the software timer (hrtimers).
After switching to the software timer, periodic timer expiration callbacks
may be executed consecutively within a single clock interrupt handler,
because hrtimers honors KVM's request for an expiration in the past and
immediately re-invokes KVM's callback after reprogramming. And because
the interrupt handler runs with IRQs disabled, restarting KVM's hrtimer
over and over until the target expiration is advanced to "now" can result
in a hard lockup.
E.g. the following hard lockup was triggered in the host when running a
Windows VM (only relevant because it used the APIC timer in periodic mode)
after resuming the VM from a long suspend (in the host).
NMI watchdog: Watchdog detected hard LOCKUP on cpu 45
...
RIP: 0010:advance_periodic_target_expiration+0x4d/0x80 [kvm]
...
RSP: 0018:ff4f88f5d98d8ef0 EFLAGS: 00000046
RAX: fff0103f91be678e RBX: fff0103f91be678e RCX: 00843a7d9e127bcc
RDX: 0000000000000002 RSI: 0052ca4003697505 RDI: ff440d5bfbdbd500
RBP: ff440d5956f99200 R08: ff2ff2a42deb6a84 R09: 000000000002a6c0
R10: 0122d794016332b3 R11: 0000000000000000 R12: ff440db1af39cfc0
R13: ff440db1af39cfc0 R14: ffffffffc0d4a560 R15: ff440db1af39d0f8
FS: 00007f04a6ffd700(0000) GS:ff440db1af380000(0000) knlGS:000000e38a3b8000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000000d5651feff8 CR3: 000000684e038002 CR4: 0000000000773ee0
PKRU: 55555554
Call Trace:
<IRQ>
apic_timer_fn+0x31/0x50 [kvm]
__hrtimer_run_queues+0x100/0x280
hrtimer_interrupt+0x100/0x210
? ttwu_do_wakeup+0x19/0x160
smp_apic_timer_interrupt+0x6a/0x130
apic_timer_interrupt+0xf/0x20
</IRQ>
Moreover, if the suspend duration of the virtual machine is not long enough
to trigger a hard lockup in this scenario, since commit 98c25ead5eda
("KVM: VMX: Move preemption timer <=> hrtimer dance to common x86"), KVM
will continue using the software timer until the guest reprograms the APIC
timer in some way. Since the periodic timer does not require frequent APIC
timer register programming, the guest may continue to use the software
timer in
---truncated---
Published Jan 14, 2026 · Updated Jul 14, 2026
Unknown · CVSS Not scored
In the Linux kernel, the following vulnerability has been resolved:
ip6_gre: make ip6gre_header() robust
Over the years, syzbot found many ways to crash the kernel
in ip6gre_header() [1].
This involves team or bonding drivers ability to dynamically
change their dev->needed_headroom and/or dev->hard_header_len
In this particular crash mld_newpack() allocated an skb
with a too small reserve/headroom, and by the time mld_sendpack()
was called, syzbot managed to attach an ip6gre device.
[1]
skbuff: skb_under_panic: text:ffffffff8a1d69a8 len:136 put:40 head:ffff888059bc7000 data:ffff888059bc6fe8 tail:0x70 end:0x6c0 dev:team0
------------[ cut here ]------------
kernel BUG at net/core/skbuff.c:213 !
<TASK>
skb_under_panic net/core/skbuff.c:223 [inline]
skb_push+0xc3/0xe0 net/core/skbuff.c:2641
ip6gre_header+0xc8/0x790 net/ipv6/ip6_gre.c:1371
dev_hard_header include/linux/netdevice.h:3436 [inline]
neigh_connected_output+0x286/0x460 net/core/neighbour.c:1618
neigh_output include/net/neighbour.h:556 [inline]
ip6_finish_output2+0xfb3/0x1480 net/ipv6/ip6_output.c:136
__ip6_finish_output net/ipv6/ip6_output.c:-1 [inline]
ip6_finish_output+0x234/0x7d0 net/ipv6/ip6_output.c:220
NF_HOOK_COND include/linux/netfilter.h:307 [inline]
ip6_output+0x340/0x550 net/ipv6/ip6_output.c:247
NF_HOOK+0x9e/0x380 include/linux/netfilter.h:318
mld_sendpack+0x8d4/0xe60 net/ipv6/mcast.c:1855
mld_send_cr net/ipv6/mcast.c:2154 [inline]
mld_ifc_work+0x83e/0xd60 net/ipv6/mcast.c:2693
Published Jan 13, 2026 · Updated Jul 14, 2026
Unknown · CVSS Not scored
In the Linux kernel, the following vulnerability has been resolved:
ipv4: Fix reference count leak when using error routes with nexthop objects
When a nexthop object is deleted, it is marked as dead and then
fib_table_flush() is called to flush all the routes that are using the
dead nexthop.
The current logic in fib_table_flush() is to only flush error routes
(e.g., blackhole) when it is called as part of network namespace
dismantle (i.e., with flush_all=true). Therefore, error routes are not
flushed when their nexthop object is deleted:
# ip link add name dummy1 up type dummy
# ip nexthop add id 1 dev dummy1
# ip route add 198.51.100.1/32 nhid 1
# ip route add blackhole 198.51.100.2/32 nhid 1
# ip nexthop del id 1
# ip route show
blackhole 198.51.100.2 nhid 1 dev dummy1
As such, they keep holding a reference on the nexthop object which in
turn holds a reference on the nexthop device, resulting in a reference
count leak:
# ip link del dev dummy1
[ 70.516258] unregister_netdevice: waiting for dummy1 to become free. Usage count = 2
Fix by flushing error routes when their nexthop is marked as dead.
IPv6 does not suffer from this problem.
Published Jan 13, 2026 · Updated Jul 14, 2026
Unknown · CVSS Not scored
In the Linux kernel, the following vulnerability has been resolved:
net: stmmac: fix the crash issue for zero copy XDP_TX action
There is a crash issue when running zero copy XDP_TX action, the crash
log is shown below.
[ 216.122464] Unable to handle kernel paging request at virtual address fffeffff80000000
[ 216.187524] Internal error: Oops: 0000000096000144 [#1] SMP
[ 216.301694] Call trace:
[ 216.304130] dcache_clean_poc+0x20/0x38 (P)
[ 216.308308] __dma_sync_single_for_device+0x1bc/0x1e0
[ 216.313351] stmmac_xdp_xmit_xdpf+0x354/0x400
[ 216.317701] __stmmac_xdp_run_prog+0x164/0x368
[ 216.322139] stmmac_napi_poll_rxtx+0xba8/0xf00
[ 216.326576] __napi_poll+0x40/0x218
[ 216.408054] Kernel panic - not syncing: Oops: Fatal exception in interrupt
For XDP_TX action, the xdp_buff is converted to xdp_frame by
xdp_convert_buff_to_frame(). The memory type of the resulting xdp_frame
depends on the memory type of the xdp_buff. For page pool based xdp_buff
it produces xdp_frame with memory type MEM_TYPE_PAGE_POOL. For zero copy
XSK pool based xdp_buff it produces xdp_frame with memory type
MEM_TYPE_PAGE_ORDER0. However, stmmac_xdp_xmit_back() does not check the
memory type and always uses the page pool type, this leads to invalid
mappings and causes the crash. Therefore, check the xdp_buff memory type
in stmmac_xdp_xmit_back() to fix this issue.
Published Jan 13, 2026 · Updated Jul 14, 2026
Unknown · CVSS Not scored
In the Linux kernel, the following vulnerability has been resolved:
mptcp: fallback earlier on simult connection
Syzkaller reports a simult-connect race leading to inconsistent fallback
status:
WARNING: CPU: 3 PID: 33 at net/mptcp/subflow.c:1515 subflow_data_ready+0x40b/0x7c0 net/mptcp/subflow.c:1515
Modules linked in:
CPU: 3 UID: 0 PID: 33 Comm: ksoftirqd/3 Not tainted syzkaller #0 PREEMPT(full)
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014
RIP: 0010:subflow_data_ready+0x40b/0x7c0 net/mptcp/subflow.c:1515
Code: 89 ee e8 78 61 3c f6 40 84 ed 75 21 e8 8e 66 3c f6 44 89 fe bf 07 00 00 00 e8 c1 61 3c f6 41 83 ff 07 74 09 e8 76 66 3c f6 90 <0f> 0b 90 e8 6d 66 3c f6 48 89 df e8 e5 ad ff ff 31 ff 89 c5 89 c6
RSP: 0018:ffffc900006cf338 EFLAGS: 00010246
RAX: 0000000000000000 RBX: ffff888031acd100 RCX: ffffffff8b7f2abf
RDX: ffff88801e6ea440 RSI: ffffffff8b7f2aca RDI: 0000000000000005
RBP: 0000000000000000 R08: 0000000000000005 R09: 0000000000000007
R10: 0000000000000004 R11: 0000000000002c10 R12: ffff88802ba69900
R13: 1ffff920000d9e67 R14: ffff888046f81800 R15: 0000000000000004
FS: 0000000000000000(0000) GS:ffff8880d69bc000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000560fc0ca1670 CR3: 0000000032c3a000 CR4: 0000000000352ef0
Call Trace:
<TASK>
tcp_data_queue+0x13b0/0x4f90 net/ipv4/tcp_input.c:5197
tcp_rcv_state_process+0xfdf/0x4ec0 net/ipv4/tcp_input.c:6922
tcp_v6_do_rcv+0x492/0x1740 net/ipv6/tcp_ipv6.c:1672
tcp_v6_rcv+0x2976/0x41e0 net/ipv6/tcp_ipv6.c:1918
ip6_protocol_deliver_rcu+0x188/0x1520 net/ipv6/ip6_input.c:438
ip6_input_finish+0x1e4/0x4b0 net/ipv6/ip6_input.c:489
NF_HOOK include/linux/netfilter.h:318 [inline]
NF_HOOK include/linux/netfilter.h:312 [inline]
ip6_input+0x105/0x2f0 net/ipv6/ip6_input.c:500
dst_input include/net/dst.h:471 [inline]
ip6_rcv_finish net/ipv6/ip6_input.c:79 [inline]
NF_HOOK include/linux/netfilter.h:318 [inline]
NF_HOOK include/linux/netfilter.h:312 [inline]
ipv6_rcv+0x264/0x650 net/ipv6/ip6_input.c:311
__netif_receive_skb_one_core+0x12d/0x1e0 net/core/dev.c:5979
__netif_receive_skb+0x1d/0x160 net/core/dev.c:6092
process_backlog+0x442/0x15e0 net/core/dev.c:6444
__napi_poll.constprop.0+0xba/0x550 net/core/dev.c:7494
napi_poll net/core/dev.c:7557 [inline]
net_rx_action+0xa9f/0xfe0 net/core/dev.c:7684
handle_softirqs+0x216/0x8e0 kernel/softirq.c:579
run_ksoftirqd kernel/softirq.c:968 [inline]
run_ksoftirqd+0x3a/0x60 kernel/softirq.c:960
smpboot_thread_fn+0x3f7/0xae0 kernel/smpboot.c:160
kthread+0x3c2/0x780 kernel/kthread.c:463
ret_from_fork+0x5d7/0x6f0 arch/x86/kernel/process.c:148
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:245
</TASK>
The TCP subflow can process the simult-connect syn-ack packet after
transitioning to TCP_FIN1 state, bypassing the MPTCP fallback check,
as the sk_state_change() callback is not invoked for * -> FIN_WAIT1
transitions.
That will move the msk socket to an inconsistent status and the next
incoming data will hit the reported splat.
Close the race moving the simult-fallback check at the earliest possible
stage - that is at syn-ack generation time.
About the fixes tags: [2] was supposed to also fix this issue introduced
by [3]. [1] is required as a dependence: it was not explicitly marked as
a fix, but it is one and it has already been backported before [3]. In
other words, this commit should be backported up to [3], including [2]
and [1] if that's not already there.
Published Jan 13, 2026 · Updated Jul 14, 2026
Unknown · CVSS Not scored
In the Linux kernel, the following vulnerability has been resolved:
net: rose: fix invalid array index in rose_kill_by_device()
rose_kill_by_device() collects sockets into a local array[] and then
iterates over them to disconnect sockets bound to a device being brought
down.
The loop mistakenly indexes array[cnt] instead of array[i]. For cnt <
ARRAY_SIZE(array), this reads an uninitialized entry; for cnt ==
ARRAY_SIZE(array), it is an out-of-bounds read. Either case can lead to
an invalid socket pointer dereference and also leaks references taken
via sock_hold().
Fix the index to use i.
Published Jan 13, 2026 · Updated Jul 14, 2026
Unknown · CVSS Not scored
In the Linux kernel, the following vulnerability has been resolved:
ipv6: BUG() in pskb_expand_head() as part of calipso_skbuff_setattr()
There exists a kernel oops caused by a BUG_ON(nhead < 0) at
net/core/skbuff.c:2232 in pskb_expand_head().
This bug is triggered as part of the calipso_skbuff_setattr()
routine when skb_cow() is passed headroom > INT_MAX
(i.e. (int)(skb_headroom(skb) + len_delta) < 0).
The root cause of the bug is due to an implicit integer cast in
__skb_cow(). The check (headroom > skb_headroom(skb)) is meant to ensure
that delta = headroom - skb_headroom(skb) is never negative, otherwise
we will trigger a BUG_ON in pskb_expand_head(). However, if
headroom > INT_MAX and delta <= -NET_SKB_PAD, the check passes, delta
becomes negative, and pskb_expand_head() is passed a negative value for
nhead.
Fix the trigger condition in calipso_skbuff_setattr(). Avoid passing
"negative" headroom sizes to skb_cow() within calipso_skbuff_setattr()
by only using skb_cow() to grow headroom.
PoC:
Using `netlabelctl` tool:
netlabelctl map del default
netlabelctl calipso add pass doi:7
netlabelctl map add default address:0::1/128 protocol:calipso,7
Then run the following PoC:
int fd = socket(AF_INET6, SOCK_DGRAM, IPPROTO_UDP);
// setup msghdr
int cmsg_size = 2;
int cmsg_len = 0x60;
struct msghdr msg;
struct sockaddr_in6 dest_addr;
struct cmsghdr * cmsg = (struct cmsghdr *) calloc(1,
sizeof(struct cmsghdr) + cmsg_len);
msg.msg_name = &dest_addr;
msg.msg_namelen = sizeof(dest_addr);
msg.msg_iov = NULL;
msg.msg_iovlen = 0;
msg.msg_control = cmsg;
msg.msg_controllen = cmsg_len;
msg.msg_flags = 0;
// setup sockaddr
dest_addr.sin6_family = AF_INET6;
dest_addr.sin6_port = htons(31337);
dest_addr.sin6_flowinfo = htonl(31337);
dest_addr.sin6_addr = in6addr_loopback;
dest_addr.sin6_scope_id = 31337;
// setup cmsghdr
cmsg->cmsg_len = cmsg_len;
cmsg->cmsg_level = IPPROTO_IPV6;
cmsg->cmsg_type = IPV6_HOPOPTS;
char * hop_hdr = (char *)cmsg + sizeof(struct cmsghdr);
hop_hdr[1] = 0x9; //set hop size - (0x9 + 1) * 8 = 80
sendmsg(fd, &msg, 0);
Published Jan 13, 2026 · Updated Jul 14, 2026
Unknown · CVSS Not scored
In the Linux kernel, the following vulnerability has been resolved:
net: nfc: fix deadlock between nfc_unregister_device and rfkill_fop_write
A deadlock can occur between nfc_unregister_device() and rfkill_fop_write()
due to lock ordering inversion between device_lock and rfkill_global_mutex.
The problematic lock order is:
Thread A (rfkill_fop_write):
rfkill_fop_write()
mutex_lock(&rfkill_global_mutex)
rfkill_set_block()
nfc_rfkill_set_block()
nfc_dev_down()
device_lock(&dev->dev) <- waits for device_lock
Thread B (nfc_unregister_device):
nfc_unregister_device()
device_lock(&dev->dev)
rfkill_unregister()
mutex_lock(&rfkill_global_mutex) <- waits for rfkill_global_mutex
This creates a classic ABBA deadlock scenario.
Fix this by moving rfkill_unregister() and rfkill_destroy() outside the
device_lock critical section. Store the rfkill pointer in a local variable
before releasing the lock, then call rfkill_unregister() after releasing
device_lock.
This change is safe because rfkill_fop_write() holds rfkill_global_mutex
while calling the rfkill callbacks, and rfkill_unregister() also acquires
rfkill_global_mutex before cleanup. Therefore, rfkill_unregister() will
wait for any ongoing callback to complete before proceeding, and
device_del() is only called after rfkill_unregister() returns, preventing
any use-after-free.
The similar lock ordering in nfc_register_device() (device_lock ->
rfkill_global_mutex via rfkill_register) is safe because during
registration the device is not yet in rfkill_list, so no concurrent
rfkill operations can occur on this device.
Published Jan 13, 2026 · Updated Jul 14, 2026
Unknown · CVSS Not scored
In the Linux kernel, the following vulnerability has been resolved:
scsi: aic94xx: fix use-after-free in device removal path
The asd_pci_remove() function fails to synchronize with pending tasklets
before freeing the asd_ha structure, leading to a potential
use-after-free vulnerability.
When a device removal is triggered (via hot-unplug or module unload),
race condition can occur.
The fix adds tasklet_kill() before freeing the asd_ha structure,
ensuring all scheduled tasklets complete before cleanup proceeds.
Published Jan 13, 2026 · Updated Jul 14, 2026
Unknown · CVSS Not scored
In the Linux kernel, the following vulnerability has been resolved:
net: hns3: using the num_tqps in the vf driver to apply for resources
Currently, hdev->htqp is allocated using hdev->num_tqps, and kinfo->tqp
is allocated using kinfo->num_tqps. However, kinfo->num_tqps is set to
min(new_tqps, hdev->num_tqps); Therefore, kinfo->num_tqps may be smaller
than hdev->num_tqps, which causes some hdev->htqp[i] to remain
uninitialized in hclgevf_knic_setup().
Thus, this patch allocates hdev->htqp and kinfo->tqp using hdev->num_tqps,
ensuring that the lengths of hdev->htqp and kinfo->tqp are consistent
and that all elements are properly initialized.
Published Jan 13, 2026 · Updated Jul 14, 2026
Unknown · CVSS Not scored
In the Linux kernel, the following vulnerability has been resolved:
ext4: xattr: fix null pointer deref in ext4_raw_inode()
If ext4_get_inode_loc() fails (e.g. if it returns -EFSCORRUPTED),
iloc.bh will remain set to NULL. Since ext4_xattr_inode_dec_ref_all()
lacks error checking, this will lead to a null pointer dereference
in ext4_raw_inode(), called right after ext4_get_inode_loc().
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Published Jan 13, 2026 · Updated Jul 14, 2026
Unknown · CVSS Not scored
In the Linux kernel, the following vulnerability has been resolved:
scsi: Revert "scsi: qla2xxx: Perform lockless command completion in abort path"
This reverts commit 0367076b0817d5c75dfb83001ce7ce5c64d803a9.
The commit being reverted added code to __qla2x00_abort_all_cmds() to
call sp->done() without holding a spinlock. But unlike the older code
below it, this new code failed to check sp->cmd_type and just assumed
TYPE_SRB, which results in a jump to an invalid pointer in target-mode
with TYPE_TGT_CMD:
qla2xxx [0000:65:00.0]-d034:8: qla24xx_do_nack_work create sess success
0000000009f7a79b
qla2xxx [0000:65:00.0]-5003:8: ISP System Error - mbx1=1ff5h mbx2=10h
mbx3=0h mbx4=0h mbx5=191h mbx6=0h mbx7=0h.
qla2xxx [0000:65:00.0]-d01e:8: -> fwdump no buffer
qla2xxx [0000:65:00.0]-f03a:8: qla_target(0): System error async event
0x8002 occurred
qla2xxx [0000:65:00.0]-00af:8: Performing ISP error recovery -
ha=0000000058183fda.
BUG: kernel NULL pointer dereference, address: 0000000000000000
PF: supervisor instruction fetch in kernel mode
PF: error_code(0x0010) - not-present page
PGD 0 P4D 0
Oops: 0010 [#1] SMP
CPU: 2 PID: 9446 Comm: qla2xxx_8_dpc Tainted: G O 6.1.133 #1
Hardware name: Supermicro Super Server/X11SPL-F, BIOS 4.2 12/15/2023
RIP: 0010:0x0
Code: Unable to access opcode bytes at 0xffffffffffffffd6.
RSP: 0018:ffffc90001f93dc8 EFLAGS: 00010206
RAX: 0000000000000282 RBX: 0000000000000355 RCX: ffff88810d16a000
RDX: ffff88810dbadaa8 RSI: 0000000000080000 RDI: ffff888169dc38c0
RBP: ffff888169dc38c0 R08: 0000000000000001 R09: 0000000000000045
R10: ffffffffa034bdf0 R11: 0000000000000000 R12: ffff88810800bb40
R13: 0000000000001aa8 R14: ffff888100136610 R15: ffff8881070f7400
FS: 0000000000000000(0000) GS:ffff88bf80080000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: ffffffffffffffd6 CR3: 000000010c8ff006 CR4: 00000000003706e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
? __die+0x4d/0x8b
? page_fault_oops+0x91/0x180
? trace_buffer_unlock_commit_regs+0x38/0x1a0
? exc_page_fault+0x391/0x5e0
? asm_exc_page_fault+0x22/0x30
__qla2x00_abort_all_cmds+0xcb/0x3e0 [qla2xxx_scst]
qla2x00_abort_all_cmds+0x50/0x70 [qla2xxx_scst]
qla2x00_abort_isp_cleanup+0x3b7/0x4b0 [qla2xxx_scst]
qla2x00_abort_isp+0xfd/0x860 [qla2xxx_scst]
qla2x00_do_dpc+0x581/0xa40 [qla2xxx_scst]
kthread+0xa8/0xd0
</TASK>
Then commit 4475afa2646d ("scsi: qla2xxx: Complete command early within
lock") added the spinlock back, because not having the lock caused a
race and a crash. But qla2x00_abort_srb() in the switch below already
checks for qla2x00_chip_is_down() and handles it the same way, so the
code above the switch is now redundant and still buggy in target-mode.
Remove it.
Published Jan 13, 2026 · Updated Jul 14, 2026
Unknown · CVSS Not scored
In the Linux kernel, the following vulnerability has been resolved:
net/mlx5: fw_tracer, Validate format string parameters
Add validation for format string parameters in the firmware tracer to
prevent potential security vulnerabilities and crashes from malformed
format strings received from firmware.
The firmware tracer receives format strings from the device firmware and
uses them to format trace messages. Without proper validation, bad
firmware could provide format strings with invalid format specifiers
(e.g., %s, %p, %n) that could lead to crashes, or other undefined
behavior.
Add mlx5_tracer_validate_params() to validate that all format specifiers
in trace strings are limited to safe integer/hex formats (%x, %d, %i,
%u, %llx, %lx, etc.). Reject strings containing other format types that
could be used to access arbitrary memory or cause crashes.
Invalid format strings are added to the trace output for visibility with
"BAD_FORMAT: " prefix.
Published Jan 13, 2026 · Updated Jul 14, 2026
Unknown · CVSS Not scored
In the Linux kernel, the following vulnerability has been resolved:
io_uring: fix filename leak in __io_openat_prep()
__io_openat_prep() allocates a struct filename using getname(). However,
for the condition of the file being installed in the fixed file table as
well as having O_CLOEXEC flag set, the function returns early. At that
point, the request doesn't have REQ_F_NEED_CLEANUP flag set. Due to this,
the memory for the newly allocated struct filename is not cleaned up,
causing a memory leak.
Fix this by setting the REQ_F_NEED_CLEANUP for the request just after the
successful getname() call, so that when the request is torn down, the
filename will be cleaned up, along with other resources needing cleanup.
Published Jan 13, 2026 · Updated Jul 14, 2026
Unknown · CVSS Not scored
In the Linux kernel, the following vulnerability has been resolved:
NFSD: NFSv4 file creation neglects setting ACL
An NFSv4 client that sets an ACL with a named principal during file
creation retrieves the ACL afterwards, and finds that it is only a
default ACL (based on the mode bits) and not the ACL that was
requested during file creation. This violates RFC 8881 section
6.4.1.3: "the ACL attribute is set as given".
The issue occurs in nfsd_create_setattr(), which calls
nfsd_attrs_valid() to determine whether to call nfsd_setattr().
However, nfsd_attrs_valid() checks only for iattr changes and
security labels, but not POSIX ACLs. When only an ACL is present,
the function returns false, nfsd_setattr() is skipped, and the
POSIX ACL is never applied to the inode.
Subsequently, when the client retrieves the ACL, the server finds
no POSIX ACL on the inode and returns one generated from the file's
mode bits rather than returning the originally-specified ACL.
Published Jan 13, 2026 · Updated Jul 14, 2026
Unknown · CVSS Not scored
In the Linux kernel, the following vulnerability has been resolved:
perf/x86/amd: Check event before enable to avoid GPF
On AMD machines cpuc->events[idx] can become NULL in a subtle race
condition with NMI->throttle->x86_pmu_stop().
Check event for NULL in amd_pmu_enable_all() before enable to avoid a GPF.
This appears to be an AMD only issue.
Syzkaller reported a GPF in amd_pmu_enable_all.
INFO: NMI handler (perf_event_nmi_handler) took too long to run: 13.143
msecs
Oops: general protection fault, probably for non-canonical address
0xdffffc0000000034: 0000 PREEMPT SMP KASAN NOPTI
KASAN: null-ptr-deref in range [0x00000000000001a0-0x00000000000001a7]
CPU: 0 UID: 0 PID: 328415 Comm: repro_36674776 Not tainted 6.12.0-rc1-syzk
RIP: 0010:x86_pmu_enable_event (arch/x86/events/perf_event.h:1195
arch/x86/events/core.c:1430)
RSP: 0018:ffff888118009d60 EFLAGS: 00010012
RAX: dffffc0000000000 RBX: 0000000000000000 RCX: 0000000000000000
RDX: 0000000000000034 RSI: 0000000000000000 RDI: 00000000000001a0
RBP: 0000000000000001 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000002
R13: ffff88811802a440 R14: ffff88811802a240 R15: ffff8881132d8601
FS: 00007f097dfaa700(0000) GS:ffff888118000000(0000) GS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00000000200001c0 CR3: 0000000103d56000 CR4: 00000000000006f0
Call Trace:
<IRQ>
amd_pmu_enable_all (arch/x86/events/amd/core.c:760 (discriminator 2))
x86_pmu_enable (arch/x86/events/core.c:1360)
event_sched_out (kernel/events/core.c:1191 kernel/events/core.c:1186
kernel/events/core.c:2346)
__perf_remove_from_context (kernel/events/core.c:2435)
event_function (kernel/events/core.c:259)
remote_function (kernel/events/core.c:92 (discriminator 1)
kernel/events/core.c:72 (discriminator 1))
__flush_smp_call_function_queue (./arch/x86/include/asm/jump_label.h:27
./include/linux/jump_label.h:207 ./include/trace/events/csd.h:64
kernel/smp.c:135 kernel/smp.c:540)
__sysvec_call_function_single (./arch/x86/include/asm/jump_label.h:27
./include/linux/jump_label.h:207
./arch/x86/include/asm/trace/irq_vectors.h:99 arch/x86/kernel/smp.c:272)
sysvec_call_function_single (arch/x86/kernel/smp.c:266 (discriminator 47)
arch/x86/kernel/smp.c:266 (discriminator 47))
</IRQ>
Published Jan 13, 2026 · Updated Jul 14, 2026
Unknown · CVSS Not scored
In the Linux kernel, the following vulnerability has been resolved:
fsnotify: do not generate ACCESS/MODIFY events on child for special files
inotify/fanotify do not allow users with no read access to a file to
subscribe to events (e.g. IN_ACCESS/IN_MODIFY), but they do allow the
same user to subscribe for watching events on children when the user
has access to the parent directory (e.g. /dev).
Users with no read access to a file but with read access to its parent
directory can still stat the file and see if it was accessed/modified
via atime/mtime change.
The same is not true for special files (e.g. /dev/null). Users will not
generally observe atime/mtime changes when other users read/write to
special files, only when someone sets atime/mtime via utimensat().
Align fsnotify events with this stat behavior and do not generate
ACCESS/MODIFY events to parent watchers on read/write of special files.
The events are still generated to parent watchers on utimensat(). This
closes some side-channels that could be possibly used for information
exfiltration [1].
[1] https://snee.la/pdf/pubs/file-notification-attacks.pdf
Published Jan 13, 2026 · Updated Jul 14, 2026
Unknown · CVSS Not scored
In the Linux kernel, the following vulnerability has been resolved:
netrom: Fix memory leak in nr_sendmsg()
syzbot reported a memory leak [1].
When function sock_alloc_send_skb() return NULL in nr_output(), the
original skb is not freed, which was allocated in nr_sendmsg(). Fix this
by freeing it before return.
[1]
BUG: memory leak
unreferenced object 0xffff888129f35500 (size 240):
comm "syz.0.17", pid 6119, jiffies 4294944652
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 00 10 52 28 81 88 ff ff ..........R(....
backtrace (crc 1456a3e4):
kmemleak_alloc_recursive include/linux/kmemleak.h:44 [inline]
slab_post_alloc_hook mm/slub.c:4983 [inline]
slab_alloc_node mm/slub.c:5288 [inline]
kmem_cache_alloc_node_noprof+0x36f/0x5e0 mm/slub.c:5340
__alloc_skb+0x203/0x240 net/core/skbuff.c:660
alloc_skb include/linux/skbuff.h:1383 [inline]
alloc_skb_with_frags+0x69/0x3f0 net/core/skbuff.c:6671
sock_alloc_send_pskb+0x379/0x3e0 net/core/sock.c:2965
sock_alloc_send_skb include/net/sock.h:1859 [inline]
nr_sendmsg+0x287/0x450 net/netrom/af_netrom.c:1105
sock_sendmsg_nosec net/socket.c:727 [inline]
__sock_sendmsg net/socket.c:742 [inline]
sock_write_iter+0x293/0x2a0 net/socket.c:1195
new_sync_write fs/read_write.c:593 [inline]
vfs_write+0x45d/0x710 fs/read_write.c:686
ksys_write+0x143/0x170 fs/read_write.c:738
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xa4/0xfa0 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Published Jan 13, 2026 · Updated Jul 14, 2026
Unknown · CVSS Not scored
In the Linux kernel, the following vulnerability has been resolved:
scsi: target: Reset t_task_cdb pointer in error case
If allocation of cmd->t_task_cdb fails, it remains NULL but is later
dereferenced in the 'err' path.
In case of error, reset NULL t_task_cdb value to point at the default
fixed-size buffer.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Published Jan 13, 2026 · Updated Jul 14, 2026
Unknown · CVSS Not scored
In the Linux kernel, the following vulnerability has been resolved:
net/hsr: fix NULL pointer dereference in prp_get_untagged_frame()
prp_get_untagged_frame() calls __pskb_copy() to create frame->skb_std
but doesn't check if the allocation failed. If __pskb_copy() returns
NULL, skb_clone() is called with a NULL pointer, causing a crash:
Oops: general protection fault, probably for non-canonical address 0xdffffc000000000f: 0000 [#1] SMP KASAN NOPTI
KASAN: null-ptr-deref in range [0x0000000000000078-0x000000000000007f]
CPU: 0 UID: 0 PID: 5625 Comm: syz.1.18 Not tainted syzkaller #0 PREEMPT(full)
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014
RIP: 0010:skb_clone+0xd7/0x3a0 net/core/skbuff.c:2041
Code: 03 42 80 3c 20 00 74 08 4c 89 f7 e8 23 29 05 f9 49 83 3e 00 0f 85 a0 01 00 00 e8 94 dd 9d f8 48 8d 6b 7e 49 89 ee 49 c1 ee 03 <43> 0f b6 04 26 84 c0 0f 85 d1 01 00 00 44 0f b6 7d 00 41 83 e7 0c
RSP: 0018:ffffc9000d00f200 EFLAGS: 00010207
RAX: ffffffff892235a1 RBX: 0000000000000000 RCX: ffff88803372a480
RDX: 0000000000000000 RSI: 0000000000000820 RDI: 0000000000000000
RBP: 000000000000007e R08: ffffffff8f7d0f77 R09: 1ffffffff1efa1ee
R10: dffffc0000000000 R11: fffffbfff1efa1ef R12: dffffc0000000000
R13: 0000000000000820 R14: 000000000000000f R15: ffff88805144cc00
FS: 0000555557f6d500(0000) GS:ffff88808d72f000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000555581d35808 CR3: 000000005040e000 CR4: 0000000000352ef0
Call Trace:
<TASK>
hsr_forward_do net/hsr/hsr_forward.c:-1 [inline]
hsr_forward_skb+0x1013/0x2860 net/hsr/hsr_forward.c:741
hsr_handle_frame+0x6ce/0xa70 net/hsr/hsr_slave.c:84
__netif_receive_skb_core+0x10b9/0x4380 net/core/dev.c:5966
__netif_receive_skb_one_core net/core/dev.c:6077 [inline]
__netif_receive_skb+0x72/0x380 net/core/dev.c:6192
netif_receive_skb_internal net/core/dev.c:6278 [inline]
netif_receive_skb+0x1cb/0x790 net/core/dev.c:6337
tun_rx_batched+0x1b9/0x730 drivers/net/tun.c:1485
tun_get_user+0x2b65/0x3e90 drivers/net/tun.c:1953
tun_chr_write_iter+0x113/0x200 drivers/net/tun.c:1999
new_sync_write fs/read_write.c:593 [inline]
vfs_write+0x5c9/0xb30 fs/read_write.c:686
ksys_write+0x145/0x250 fs/read_write.c:738
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xfa/0xfa0 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7f0449f8e1ff
Code: 89 54 24 18 48 89 74 24 10 89 7c 24 08 e8 f9 92 02 00 48 8b 54 24 18 48 8b 74 24 10 41 89 c0 8b 7c 24 08 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 31 44 89 c7 48 89 44 24 08 e8 4c 93 02 00 48
RSP: 002b:00007ffd7ad94c90 EFLAGS: 00000293 ORIG_RAX: 0000000000000001
RAX: ffffffffffffffda RBX: 00007f044a1e5fa0 RCX: 00007f0449f8e1ff
RDX: 000000000000003e RSI: 0000200000000500 RDI: 00000000000000c8
RBP: 00007ffd7ad94d20 R08: 0000000000000000 R09: 0000000000000000
R10: 000000000000003e R11: 0000000000000293 R12: 0000000000000001
R13: 00007f044a1e5fa0 R14: 00007f044a1e5fa0 R15: 0000000000000003
</TASK>
Add a NULL check immediately after __pskb_copy() to handle allocation
failures gracefully.
Published Jan 13, 2026 · Updated Jul 14, 2026
Unknown · CVSS Not scored
In the Linux kernel, the following vulnerability has been resolved:
spi: fsl-cpm: Check length parity before switching to 16 bit mode
Commit fc96ec826bce ("spi: fsl-cpm: Use 16 bit mode for large transfers
with even size") failed to make sure that the size is really even
before switching to 16 bit mode. Until recently the problem went
unnoticed because kernfs uses a pre-allocated bounce buffer of size
PAGE_SIZE for reading EEPROM.
But commit 8ad6249c51d0 ("eeprom: at25: convert to spi-mem API")
introduced an additional dynamically allocated bounce buffer whose size
is exactly the size of the transfer, leading to a buffer overrun in
the fsl-cpm driver when that size is odd.
Add the missing length parity verification and remain in 8 bit mode
when the length is not even.
Published Jan 13, 2026 · Updated Jul 14, 2026
Unknown · CVSS Not scored
In the Linux kernel, the following vulnerability has been resolved:
NFS: Automounted filesystems should inherit ro,noexec,nodev,sync flags
When a filesystem is being automounted, it needs to preserve the
user-set superblock mount options, such as the "ro" flag.
Published Jan 5, 2026 · Updated Jul 14, 2026
