High · CVSS 7.8
In the Linux kernel, the following vulnerability has been resolved:
gfs2: Validate i_depth for exhash directories
A fuzzer test introduced corruption that ends up with a depth of 0 in
dir_e_read(), causing an undefined shift by 32 at:
index = hash >> (32 - dip->i_depth);
As calculated in an open-coded way in dir_make_exhash(), the minimum
depth for an exhash directory is ilog2(sdp->sd_hash_ptrs) and 0 is
invalid as sdp->sd_hash_ptrs is fixed as sdp->bsize / 16 at mount time.
So we can avoid the undefined behaviour by checking for depth values
lower than the minimum in gfs2_dinode_in(). Values greater than the
maximum are already being checked for there.
Also switch the calculation in dir_make_exhash() to use ilog2() to
clarify how the depth is calculated.
Tested with the syzkaller repro.c and xfstests '-g quick'.
Published Sep 4, 2025 · Updated Jul 30, 2026
Critical · CVSS 9.8
In the Linux kernel, the following vulnerability has been resolved:
drbd: add missing kref_get in handle_write_conflicts
With `two-primaries` enabled, DRBD tries to detect "concurrent" writes
and handle write conflicts, so that even if you write to the same sector
simultaneously on both nodes, they end up with the identical data once
the writes are completed.
In handling "superseeded" writes, we forgot a kref_get,
resulting in a premature drbd_destroy_device and use after free,
and further to kernel crashes with symptoms.
Relevance: No one should use DRBD as a random data generator, and apparently
all users of "two-primaries" handle concurrent writes correctly on layer up.
That is cluster file systems use some distributed lock manager,
and live migration in virtualization environments stops writes on one node
before starting writes on the other node.
Which means that other than for "test cases",
this code path is never taken in real life.
FYI, in DRBD 9, things are handled differently nowadays. We still detect
"write conflicts", but no longer try to be smart about them.
We decided to disconnect hard instead: upper layers must not submit concurrent
writes. If they do, that's their fault.
Published Sep 4, 2025 · Updated Jul 30, 2026
High · CVSS 7.1
In the Linux kernel, the following vulnerability has been resolved:
fs/ntfs3: Add sanity check for file name
The length of the file name should be smaller than the directory entry size.
Published Sep 4, 2025 · Updated Jul 30, 2026
High · CVSS 7.8
In the Linux kernel, the following vulnerability has been resolved:
drm/xe: Make dma-fences compliant with the safe access rules
Xe can free some of the data pointed to by the dma-fences it exports. Most
notably the timeline name can get freed if userspace closes the associated
submit queue. At the same time the fence could have been exported to a
third party (for example a sync_fence fd) which will then cause an use-
after-free on subsequent access.
To make this safe we need to make the driver compliant with the newly
documented dma-fence rules. Driver has to ensure a RCU grace period
between signalling a fence and freeing any data pointed to by said fence.
For the timeline name we simply make the queue be freed via kfree_rcu and
for the shared lock associated with multiple queues we add a RCU grace
period before freeing the per GT structure holding the lock.
Published Sep 4, 2025 · Updated Jul 30, 2026
High · CVSS 7.8
In the Linux kernel, the following vulnerability has been resolved:
jfs: upper bound check of tree index in dbAllocAG
When computing the tree index in dbAllocAG, we never check if we are
out of bounds realative to the size of the stree.
This could happen in a scenario where the filesystem metadata are
corrupted.
Published Sep 4, 2025 · Updated Jul 30, 2026
High · CVSS 8.8
In the Linux kernel, the following vulnerability has been resolved:
iommufd: Prevent ALIGN() overflow
When allocating IOVA the candidate range gets aligned to the target
alignment. If the range is close to ULONG_MAX then the ALIGN() can
wrap resulting in a corrupted iova.
Open code the ALIGN() using get_add_overflow() to prevent this.
This simplifies the checks as we don't need to check for length earlier
either.
Consolidate the two copies of this code under a single helper.
This bug would allow userspace to create a mapping that overlaps with some
other mapping or a reserved range.
Published Sep 4, 2025 · Updated Jul 30, 2026
High · CVSS 7.3
In the Linux kernel, the following vulnerability has been resolved:
comedi: fix race between polling and detaching
syzbot reports a use-after-free in comedi in the below link, which is
due to comedi gladly removing the allocated async area even though poll
requests are still active on the wait_queue_head inside of it. This can
cause a use-after-free when the poll entries are later triggered or
removed, as the memory for the wait_queue_head has been freed. We need
to check there are no tasks queued on any of the subdevices' wait queues
before allowing the device to be detached by the `COMEDI_DEVCONFIG`
ioctl.
Tasks will read-lock `dev->attach_lock` before adding themselves to the
subdevice wait queue, so fix the problem in the `COMEDI_DEVCONFIG` ioctl
handler by write-locking `dev->attach_lock` before checking that all of
the subdevices are safe to be deleted. This includes testing for any
sleepers on the subdevices' wait queues. It remains locked until the
device has been detached. This requires the `comedi_device_detach()`
function to be refactored slightly, moving the bulk of it into new
function `comedi_device_detach_locked()`.
Note that the refactor of `comedi_device_detach()` results in
`comedi_device_cancel_all()` now being called while `dev->attach_lock`
is write-locked, which wasn't the case previously, but that does not
matter.
Thanks to Jens Axboe for diagnosing the problem and co-developing this
patch.
Published Sep 4, 2025 · Updated Jul 30, 2026
High · CVSS 7.8
In the Linux kernel, the following vulnerability has been resolved:
fbdev: Fix vmalloc out-of-bounds write in fast_imageblit
This issue triggers when a userspace program does an ioctl
FBIOPUT_CON2FBMAP by passing console number and frame buffer number.
Ideally this maps console to frame buffer and updates the screen if
console is visible.
As part of mapping it has to do resize of console according to frame
buffer info. if this resize fails and returns from vc_do_resize() and
continues further. At this point console and new frame buffer are mapped
and sets display vars. Despite failure still it continue to proceed
updating the screen at later stages where vc_data is related to previous
frame buffer and frame buffer info and display vars are mapped to new
frame buffer and eventully leading to out-of-bounds write in
fast_imageblit(). This bheviour is excepted only when fg_console is
equal to requested console which is a visible console and updates screen
with invalid struct references in fbcon_putcs().
Published Sep 4, 2025 · Updated Jul 30, 2026
High · CVSS 7.3
In the Linux kernel, the following vulnerability has been resolved:
media: venus: Fix OOB read due to missing payload bound check
Currently, The event_seq_changed() handler processes a variable number
of properties sent by the firmware. The number of properties is indicated
by the firmware and used to iterate over the payload. However, the
payload size is not being validated against the actual message length.
This can lead to out-of-bounds memory access if the firmware provides a
property count that exceeds the data available in the payload. Such a
condition can result in kernel crashes or potential information leaks if
memory beyond the buffer is accessed.
Fix this by properly validating the remaining size of the payload before
each property access and updating bounds accordingly as properties are
parsed.
This ensures that property parsing is safely bounded within the received
message buffer and protects against malformed or malicious firmware
behavior.
Published Sep 4, 2025 · Updated Jul 30, 2026
High · CVSS 7.8
In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_tables: reject duplicate device on updates
A chain/flowtable update with duplicated devices in the same batch is
possible. Unfortunately, netdev event path only removes the first
device that is found, leaving unregistered the hook of the duplicated
device.
Check if a duplicated device exists in the transaction batch, bail out
with EEXIST in such case.
WARNING is hit when unregistering the hook:
[49042.221275] WARNING: CPU: 4 PID: 8425 at net/netfilter/core.c:340 nf_hook_entry_head+0xaa/0x150
[49042.221375] CPU: 4 UID: 0 PID: 8425 Comm: nft Tainted: G S 6.16.0+ #170 PREEMPT(full)
[...]
[49042.221382] RIP: 0010:nf_hook_entry_head+0xaa/0x150
Published Sep 3, 2025 · Updated Jul 30, 2026
High · CVSS 7.8
In the Linux kernel, the following vulnerability has been resolved:
f2fs: fix to avoid out-of-boundary access in dnode page
As Jiaming Zhang reported:
<TASK>
__dump_stack lib/dump_stack.c:94 [inline]
dump_stack_lvl+0x1c1/0x2a0 lib/dump_stack.c:120
print_address_description mm/kasan/report.c:378 [inline]
print_report+0x17e/0x800 mm/kasan/report.c:480
kasan_report+0x147/0x180 mm/kasan/report.c:593
data_blkaddr fs/f2fs/f2fs.h:3053 [inline]
f2fs_data_blkaddr fs/f2fs/f2fs.h:3058 [inline]
f2fs_get_dnode_of_data+0x1a09/0x1c40 fs/f2fs/node.c:855
f2fs_reserve_block+0x53/0x310 fs/f2fs/data.c:1195
prepare_write_begin fs/f2fs/data.c:3395 [inline]
f2fs_write_begin+0xf39/0x2190 fs/f2fs/data.c:3594
generic_perform_write+0x2c7/0x910 mm/filemap.c:4112
f2fs_buffered_write_iter fs/f2fs/file.c:4988 [inline]
f2fs_file_write_iter+0x1ec8/0x2410 fs/f2fs/file.c:5216
new_sync_write fs/read_write.c:593 [inline]
vfs_write+0x546/0xa90 fs/read_write.c:686
ksys_write+0x149/0x250 fs/read_write.c:738
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xf3/0x3d0 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
The root cause is in the corrupted image, there is a dnode has the same
node id w/ its inode, so during f2fs_get_dnode_of_data(), it tries to
access block address in dnode at offset 934, however it parses the dnode
as inode node, so that get_dnode_addr() returns 360, then it tries to
access page address from 360 + 934 * 4 = 4096 w/ 4 bytes.
To fix this issue, let's add sanity check for node id of all direct nodes
during f2fs_get_dnode_of_data().
Published Aug 30, 2025 · Updated Jul 30, 2026
High · CVSS 7.8
In the Linux kernel, the following vulnerability has been resolved:
xfrm: state: initialize state_ptrs earlier in xfrm_state_find
In case of preemption, xfrm_state_look_at will find a different
pcpu_id and look up states for that other CPU. If we matched a state
for CPU2 in the state_cache while the lookup started on CPU1, we will
jump to "found", but the "best" state that we got will be ignored and
we will enter the "acquire" block. This block uses state_ptrs, which
isn't initialized at this point.
Let's initialize state_ptrs just after taking rcu_read_lock. This will
also prevent a possible misuse in the future, if someone adjusts this
function.
Published Aug 22, 2025 · Updated Jul 30, 2026
High · CVSS 7.8
In the Linux kernel, the following vulnerability has been resolved:
arm64/entry: Mask DAIF in cpu_switch_to(), call_on_irq_stack()
`cpu_switch_to()` and `call_on_irq_stack()` manipulate SP to change
to different stacks along with the Shadow Call Stack if it is enabled.
Those two stack changes cannot be done atomically and both functions
can be interrupted by SErrors or Debug Exceptions which, though unlikely,
is very much broken : if interrupted, we can end up with mismatched stacks
and Shadow Call Stack leading to clobbered stacks.
In `cpu_switch_to()`, it can happen when SP_EL0 points to the new task,
but x18 stills points to the old task's SCS. When the interrupt handler
tries to save the task's SCS pointer, it will save the old task
SCS pointer (x18) into the new task struct (pointed to by SP_EL0),
clobbering it.
In `call_on_irq_stack()`, it can happen when switching from the task stack
to the IRQ stack and when switching back. In both cases, we can be
interrupted when the SCS pointer points to the IRQ SCS, but SP points to
the task stack. The nested interrupt handler pushes its return addresses
on the IRQ SCS. It then detects that SP points to the task stack,
calls `call_on_irq_stack()` and clobbers the task SCS pointer with
the IRQ SCS pointer, which it will also use !
This leads to tasks returning to addresses on the wrong SCS,
or even on the IRQ SCS, triggering kernel panics via CONFIG_VMAP_STACK
or FPAC if enabled.
This is possible on a default config, but unlikely.
However, when enabling CONFIG_ARM64_PSEUDO_NMI, DAIF is unmasked and
instead the GIC is responsible for filtering what interrupts the CPU
should receive based on priority.
Given the goal of emulating NMIs, pseudo-NMIs can be received by the CPU
even in `cpu_switch_to()` and `call_on_irq_stack()`, possibly *very*
frequently depending on the system configuration and workload, leading
to unpredictable kernel panics.
Completely mask DAIF in `cpu_switch_to()` and restore it when returning.
Do the same in `call_on_irq_stack()`, but restore and mask around
the branch.
Mask DAIF even if CONFIG_SHADOW_CALL_STACK is not enabled for consistency
of behaviour between all configurations.
Introduce and use an assembly macro for saving and masking DAIF,
as the existing one saves but only masks IF.
Published Aug 22, 2025 · Updated Jul 30, 2026
High · CVSS 7.8
In the Linux kernel, the following vulnerability has been resolved:
iio: fix potential out-of-bound write
The buffer is set to 20 characters. If a caller write more characters,
count is truncated to the max available space in "simple_write_to_buffer".
To protect from OoB access, check that the input size fit into buffer and
add a zero terminator after copy to the end of the copied data.
Published Aug 22, 2025 · Updated Jul 30, 2026
High · CVSS 7.1
In the Linux kernel, the following vulnerability has been resolved:
ASoC: mediatek: mt8365-dai-i2s: pass correct size to mt8365_dai_set_priv
Given mt8365_dai_set_priv allocate priv_size space to copy priv_data which
means we should pass mt8365_i2s_priv[i] or "struct mtk_afe_i2s_priv"
instead of afe_priv which has the size of "struct mt8365_afe_private".
Otherwise the KASAN complains about.
[ 59.389765] BUG: KASAN: global-out-of-bounds in mt8365_dai_set_priv+0xc8/0x168 [snd_soc_mt8365_pcm]
...
[ 59.394789] Call trace:
[ 59.395167] dump_backtrace+0xa0/0x128
[ 59.395733] show_stack+0x20/0x38
[ 59.396238] dump_stack_lvl+0xe8/0x148
[ 59.396806] print_report+0x37c/0x5e0
[ 59.397358] kasan_report+0xac/0xf8
[ 59.397885] kasan_check_range+0xe8/0x190
[ 59.398485] asan_memcpy+0x3c/0x98
[ 59.399022] mt8365_dai_set_priv+0xc8/0x168 [snd_soc_mt8365_pcm]
[ 59.399928] mt8365_dai_i2s_register+0x1e8/0x2b0 [snd_soc_mt8365_pcm]
[ 59.400893] mt8365_afe_pcm_dev_probe+0x4d0/0xdf0 [snd_soc_mt8365_pcm]
[ 59.401873] platform_probe+0xcc/0x228
[ 59.402442] really_probe+0x340/0x9e8
[ 59.402992] driver_probe_device+0x16c/0x3f8
[ 59.403638] driver_probe_device+0x64/0x1d8
[ 59.404256] driver_attach+0x1dc/0x4c8
[ 59.404840] bus_for_each_dev+0x100/0x190
[ 59.405442] driver_attach+0x44/0x68
[ 59.405980] bus_add_driver+0x23c/0x500
[ 59.406550] driver_register+0xf8/0x3d0
[ 59.407122] platform_driver_register+0x68/0x98
[ 59.407810] mt8365_afe_pcm_driver_init+0x2c/0xff8 [snd_soc_mt8365_pcm]
Published Aug 22, 2025 · Updated Jul 30, 2026
High · CVSS 7.1
In the Linux kernel, the following vulnerability has been resolved:
platform/x86: alienware-wmi-wmax: Fix `dmi_system_id` array
Add missing empty member to `awcc_dmi_table`.
Published Aug 22, 2025 · Updated Jul 30, 2026
Critical · CVSS 9.8
In the Linux kernel, the following vulnerability has been resolved:
[ceph] parse_longname(): strrchr() expects NUL-terminated string
... and parse_longname() is not guaranteed that. That's the reason
why it uses kmemdup_nul() to build the argument for kstrtou64();
the problem is, kstrtou64() is not the only thing that need it.
Just get a NUL-terminated copy of the entire thing and be done
with that...
Published Aug 22, 2025 · Updated Jul 30, 2026
High · CVSS 7.8
In the Linux kernel, the following vulnerability has been resolved:
gfs2: No more self recovery
When a node withdraws and it turns out that it is the only node that has
the filesystem mounted, gfs2 currently tries to replay the local journal
to bring the filesystem back into a consistent state. Not only is that
a very bad idea, it has also never worked because gfs2_recover_func()
will refuse to do anything during a withdraw.
However, before even getting to this point, gfs2_recover_func()
dereferences sdp->sd_jdesc->jd_inode. This was a use-after-free before
commit 04133b607a78 ("gfs2: Prevent double iput for journal on error")
and is a NULL pointer dereference since then.
Simply get rid of self recovery to fix that.
Published Aug 22, 2025 · Updated Jul 30, 2026
High · CVSS 8.8
In the Linux kernel, the following vulnerability has been resolved:
nvmet: pci-epf: Do not complete commands twice if nvmet_req_init() fails
Have nvmet_req_init() and req->execute() complete failed commands.
Description of the problem:
nvmet_req_init() calls __nvmet_req_complete() internally upon failure,
e.g., unsupported opcode, which calls the "queue_response" callback,
this results in nvmet_pci_epf_queue_response() being called, which will
call nvmet_pci_epf_complete_iod() if data_len is 0 or if dma_dir is
different from DMA_TO_DEVICE. This results in a double completion as
nvmet_pci_epf_exec_iod_work() also calls nvmet_pci_epf_complete_iod()
when nvmet_req_init() fails.
Steps to reproduce:
On the host send a command with an unsupported opcode with nvme-cli,
For example the admin command "security receive"
$ sudo nvme security-recv /dev/nvme0n1 -n1 -x4096
This triggers a double completion as nvmet_req_init() fails and
nvmet_pci_epf_queue_response() is called, here iod->dma_dir is still
in the default state of "DMA_NONE" as set by default in
nvmet_pci_epf_alloc_iod(), so nvmet_pci_epf_complete_iod() is called.
Because nvmet_req_init() failed nvmet_pci_epf_complete_iod() is also
called in nvmet_pci_epf_exec_iod_work() leading to a double completion.
This not only sends two completions to the host but also corrupts the
state of the PCI NVMe target leading to kernel oops.
This patch lets nvmet_req_init() and req->execute() complete all failed
commands, and removes the double completion case in
nvmet_pci_epf_exec_iod_work() therefore fixing the edge cases where
double completions occurred.
Published Aug 22, 2025 · Updated Jul 30, 2026
High · CVSS 7.3
In the Linux kernel, the following vulnerability has been resolved:
wifi: rtw89: mcc: prevent shift wrapping in rtw89_core_mlsr_switch()
The "link_id" value comes from the user via debugfs. If it's larger
than BITS_PER_LONG then that would result in shift wrapping and
potentially an out of bounds access later. In fact, we can limit it
to IEEE80211_MLD_MAX_NUM_LINKS (15).
Fortunately, only root can write to debugfs files so the security
impact is minimal.
Published Aug 22, 2025 · Updated Jul 30, 2026
High · CVSS 7.8
In the Linux kernel, the following vulnerability has been resolved:
wifi: iwlwifi: Fix error code in iwl_op_mode_dvm_start()
Preserve the error code if iwl_setup_deferred_work() fails. The current
code returns ERR_PTR(0) (which is NULL) on this path. I believe the
missing error code potentially leads to a use after free involving
debugfs.
Published Aug 22, 2025 · Updated Jul 30, 2026
High · CVSS 7.8
In the Linux kernel, the following vulnerability has been resolved:
proc: use the same treatment to check proc_lseek as ones for proc_read_iter et.al
Check pde->proc_ops->proc_lseek directly may cause UAF in rmmod scenario.
It's a gap in proc_reg_open() after commit 654b33ada4ab("proc: fix UAF in
proc_get_inode()"). Followed by AI Viro's suggestion, fix it in same
manner.
Published Aug 22, 2025 · Updated Jul 30, 2026
High · CVSS 7.3
In the Linux kernel, the following vulnerability has been resolved:
f2fs: fix to avoid out-of-boundary access in devs.path
- touch /mnt/f2fs/012345678901234567890123456789012345678901234567890123
- truncate -s $((1024*1024*1024)) \
/mnt/f2fs/012345678901234567890123456789012345678901234567890123
- touch /mnt/f2fs/file
- truncate -s $((1024*1024*1024)) /mnt/f2fs/file
- mkfs.f2fs /mnt/f2fs/012345678901234567890123456789012345678901234567890123 \
-c /mnt/f2fs/file
- mount /mnt/f2fs/012345678901234567890123456789012345678901234567890123 \
/mnt/f2fs/loop
[16937.192225] F2FS-fs (loop0): Mount Device [ 0]: /mnt/f2fs/012345678901234567890123456789012345678901234567890123\xff\x01, 511, 0 - 3ffff
[16937.192268] F2FS-fs (loop0): Failed to find devices
If device path length equals to MAX_PATH_LEN, sbi->devs.path[] may
not end up w/ null character due to path array is fully filled, So
accidently, fields locate after path[] may be treated as part of
device path, result in parsing wrong device path.
struct f2fs_dev_info {
...
char path[MAX_PATH_LEN];
...
};
Let's add one byte space for sbi->devs.path[] to store null
character of device path string.
Published Aug 22, 2025 · Updated Jul 30, 2026
High · CVSS 8.8
In the Linux kernel, the following vulnerability has been resolved:
wifi: cfg80211: Add missing lock in cfg80211_check_and_end_cac()
Callers of wdev_chandef() must hold the wiphy mutex.
But the worker cfg80211_propagate_cac_done_wk() never takes the lock.
Which triggers the warning below with the mesh_peer_connected_dfs
test from hostapd and not (yet) released mac80211 code changes:
WARNING: CPU: 0 PID: 495 at net/wireless/chan.c:1552 wdev_chandef+0x60/0x165
Modules linked in:
CPU: 0 UID: 0 PID: 495 Comm: kworker/u4:2 Not tainted 6.14.0-rc5-wt-g03960e6f9d47 #33 13c287eeabfe1efea01c0bcc863723ab082e17cf
Workqueue: cfg80211 cfg80211_propagate_cac_done_wk
Stack:
00000000 00000001 ffffff00 6093267c
00000000 6002ec30 6d577c50 60037608
00000000 67e8d108 6063717b 00000000
Call Trace:
[<6002ec30>] ? _printk+0x0/0x98
[<6003c2b3>] show_stack+0x10e/0x11a
[<6002ec30>] ? _printk+0x0/0x98
[<60037608>] dump_stack_lvl+0x71/0xb8
[<6063717b>] ? wdev_chandef+0x60/0x165
[<6003766d>] dump_stack+0x1e/0x20
[<6005d1b7>] __warn+0x101/0x20f
[<6005d3a8>] warn_slowpath_fmt+0xe3/0x15d
[<600b0c5c>] ? mark_lock.part.0+0x0/0x4ec
[<60751191>] ? __this_cpu_preempt_check+0x0/0x16
[<600b11a2>] ? mark_held_locks+0x5a/0x6e
[<6005d2c5>] ? warn_slowpath_fmt+0x0/0x15d
[<60052e53>] ? unblock_signals+0x3a/0xe7
[<60052f2d>] ? um_set_signals+0x2d/0x43
[<60751191>] ? __this_cpu_preempt_check+0x0/0x16
[<607508b2>] ? lock_is_held_type+0x207/0x21f
[<6063717b>] wdev_chandef+0x60/0x165
[<605f89b4>] regulatory_propagate_dfs_state+0x247/0x43f
[<60052f00>] ? um_set_signals+0x0/0x43
[<605e6bfd>] cfg80211_propagate_cac_done_wk+0x3a/0x4a
[<6007e460>] process_scheduled_works+0x3bc/0x60e
[<6007d0ec>] ? move_linked_works+0x4d/0x81
[<6007d120>] ? assign_work+0x0/0xaa
[<6007f81f>] worker_thread+0x220/0x2dc
[<600786ef>] ? set_pf_worker+0x0/0x57
[<60087c96>] ? to_kthread+0x0/0x43
[<6008ab3c>] kthread+0x2d3/0x2e2
[<6007f5ff>] ? worker_thread+0x0/0x2dc
[<6006c05b>] ? calculate_sigpending+0x0/0x56
[<6003b37d>] new_thread_handler+0x4a/0x64
irq event stamp: 614611
hardirqs last enabled at (614621): [<00000000600bc96b>] __up_console_sem+0x82/0xaf
hardirqs last disabled at (614630): [<00000000600bc92c>] __up_console_sem+0x43/0xaf
softirqs last enabled at (614268): [<00000000606c55c6>] __ieee80211_wake_queue+0x933/0x985
softirqs last disabled at (614266): [<00000000606c52d6>] __ieee80211_wake_queue+0x643/0x985
Published Aug 22, 2025 · Updated Jul 30, 2026
High · CVSS 7.8
In the Linux kernel, the following vulnerability has been resolved:
bpf: Disable migration in nf_hook_run_bpf().
syzbot reported that the netfilter bpf prog can be called without
migration disabled in xmit path.
Then the assertion in __bpf_prog_run() fails, triggering the splat
below. [0]
Let's use bpf_prog_run_pin_on_cpu() in nf_hook_run_bpf().
[0]:
BUG: assuming non migratable context at ./include/linux/filter.h:703
in_atomic(): 0, irqs_disabled(): 0, migration_disabled() 0 pid: 5829, name: sshd-session
3 locks held by sshd-session/5829:
#0: ffff88807b4e4218 (sk_lock-AF_INET){+.+.}-{0:0}, at: lock_sock include/net/sock.h:1667 [inline]
#0: ffff88807b4e4218 (sk_lock-AF_INET){+.+.}-{0:0}, at: tcp_sendmsg+0x20/0x50 net/ipv4/tcp.c:1395
#1: ffffffff8e5c4e00 (rcu_read_lock){....}-{1:3}, at: rcu_lock_acquire include/linux/rcupdate.h:331 [inline]
#1: ffffffff8e5c4e00 (rcu_read_lock){....}-{1:3}, at: rcu_read_lock include/linux/rcupdate.h:841 [inline]
#1: ffffffff8e5c4e00 (rcu_read_lock){....}-{1:3}, at: __ip_queue_xmit+0x69/0x26c0 net/ipv4/ip_output.c:470
#2: ffffffff8e5c4e00 (rcu_read_lock){....}-{1:3}, at: rcu_lock_acquire include/linux/rcupdate.h:331 [inline]
#2: ffffffff8e5c4e00 (rcu_read_lock){....}-{1:3}, at: rcu_read_lock include/linux/rcupdate.h:841 [inline]
#2: ffffffff8e5c4e00 (rcu_read_lock){....}-{1:3}, at: nf_hook+0xb2/0x680 include/linux/netfilter.h:241
CPU: 0 UID: 0 PID: 5829 Comm: sshd-session Not tainted 6.16.0-rc6-syzkaller-00002-g155a3c003e55 #0 PREEMPT(full)
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 05/07/2025
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:94 [inline]
dump_stack_lvl+0x16c/0x1f0 lib/dump_stack.c:120
__cant_migrate kernel/sched/core.c:8860 [inline]
__cant_migrate+0x1c7/0x250 kernel/sched/core.c:8834
__bpf_prog_run include/linux/filter.h:703 [inline]
bpf_prog_run include/linux/filter.h:725 [inline]
nf_hook_run_bpf+0x83/0x1e0 net/netfilter/nf_bpf_link.c:20
nf_hook_entry_hookfn include/linux/netfilter.h:157 [inline]
nf_hook_slow+0xbb/0x200 net/netfilter/core.c:623
nf_hook+0x370/0x680 include/linux/netfilter.h:272
NF_HOOK_COND include/linux/netfilter.h:305 [inline]
ip_output+0x1bc/0x2a0 net/ipv4/ip_output.c:433
dst_output include/net/dst.h:459 [inline]
ip_local_out net/ipv4/ip_output.c:129 [inline]
__ip_queue_xmit+0x1d7d/0x26c0 net/ipv4/ip_output.c:527
__tcp_transmit_skb+0x2686/0x3e90 net/ipv4/tcp_output.c:1479
tcp_transmit_skb net/ipv4/tcp_output.c:1497 [inline]
tcp_write_xmit+0x1274/0x84e0 net/ipv4/tcp_output.c:2838
__tcp_push_pending_frames+0xaf/0x390 net/ipv4/tcp_output.c:3021
tcp_push+0x225/0x700 net/ipv4/tcp.c:759
tcp_sendmsg_locked+0x1870/0x42b0 net/ipv4/tcp.c:1359
tcp_sendmsg+0x2e/0x50 net/ipv4/tcp.c:1396
inet_sendmsg+0xb9/0x140 net/ipv4/af_inet.c:851
sock_sendmsg_nosec net/socket.c:712 [inline]
__sock_sendmsg net/socket.c:727 [inline]
sock_write_iter+0x4aa/0x5b0 net/socket.c:1131
new_sync_write fs/read_write.c:593 [inline]
vfs_write+0x6c7/0x1150 fs/read_write.c:686
ksys_write+0x1f8/0x250 fs/read_write.c:738
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xcd/0x4c0 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7fe7d365d407
Code: 48 89 fa 4c 89 df e8 38 aa 00 00 8b 93 08 03 00 00 59 5e 48 83 f8 fc 74 1a 5b c3 0f 1f 84 00 00 00 00 00 48 8b 44 24 10 0f 05 <5b> c3 0f 1f 80 00 00 00 00 83 e2 39 83 fa 08 75 de e8 23 ff ff ff
RSP:
Published Aug 22, 2025 · Updated Jul 30, 2026
High · CVSS 7.1
In the Linux kernel, the following vulnerability has been resolved:
netfilter: xt_nfacct: don't assume acct name is null-terminated
BUG: KASAN: slab-out-of-bounds in .. lib/vsprintf.c:721
Read of size 1 at addr ffff88801eac95c8 by task syz-executor183/5851
[..]
string+0x231/0x2b0 lib/vsprintf.c:721
vsnprintf+0x739/0xf00 lib/vsprintf.c:2874
[..]
nfacct_mt_checkentry+0xd2/0xe0 net/netfilter/xt_nfacct.c:41
xt_check_match+0x3d1/0xab0 net/netfilter/x_tables.c:523
nfnl_acct_find_get() handles non-null input, but the error
printk relied on its presence.
Published Aug 22, 2025 · Updated Jul 30, 2026
High · CVSS 7.8
In the Linux kernel, the following vulnerability has been resolved:
f2fs: compress: fix UAF of f2fs_inode_info in f2fs_free_dic
The decompress_io_ctx may be released asynchronously after
I/O completion. If this file is deleted immediately after read,
and the kworker of processing post_read_wq has not been executed yet
due to high workloads, It is possible that the inode(f2fs_inode_info)
is evicted and freed before it is used f2fs_free_dic.
The UAF case as below:
Thread A Thread B
- f2fs_decompress_end_io
- f2fs_put_dic
- queue_work
add free_dic work to post_read_wq
- do_unlink
- iput
- evict
- call_rcu
This file is deleted after read.
Thread C kworker to process post_read_wq
- rcu_do_batch
- f2fs_free_inode
- kmem_cache_free
inode is freed by rcu
- process_scheduled_works
- f2fs_late_free_dic
- f2fs_free_dic
- f2fs_release_decomp_mem
read (dic->inode)->i_compress_algorithm
This patch store compress_algorithm and sbi in dic to avoid inode UAF.
In addition, the previous solution is deprecated in [1] may cause system hang.
[1] https://lore.kernel.org/all/c36ab955-c8db-4a8b-a9d0-f07b5f426c3f@kernel.org
Published Aug 22, 2025 · Updated Jul 30, 2026
High · CVSS 7.8
In the Linux kernel, the following vulnerability has been resolved:
media: ti: j721e-csi2rx: fix list_del corruption
If ti_csi2rx_start_dma() fails in ti_csi2rx_dma_callback(), the buffer is
marked done with VB2_BUF_STATE_ERROR but is not removed from the DMA queue.
This causes the same buffer to be retried in the next iteration, resulting
in a double list_del() and eventual list corruption.
Fix this by removing the buffer from the queue before calling
vb2_buffer_done() on error.
This resolves a crash due to list_del corruption:
[ 37.811243] j721e-csi2rx 30102000.ticsi2rx: Failed to queue the next buffer for DMA
[ 37.832187] slab kmalloc-2k start ffff00000255b000 pointer offset 1064 size 2048
[ 37.839761] list_del corruption. next->prev should be ffff00000255bc28, but was ffff00000255d428. (next=ffff00000255b428)
[ 37.850799] ------------[ cut here ]------------
[ 37.855424] kernel BUG at lib/list_debug.c:65!
[ 37.859876] Internal error: Oops - BUG: 00000000f2000800 [#1] SMP
[ 37.866061] Modules linked in: i2c_dev usb_f_rndis u_ether libcomposite dwc3 udc_core usb_common aes_ce_blk aes_ce_cipher ghash_ce gf128mul sha1_ce cpufreq_dt dwc3_am62 phy_gmii_sel sa2ul
[ 37.882830] CPU: 0 UID: 0 PID: 0 Comm: swapper/0 Not tainted 6.16.0-rc3+ #28 VOLUNTARY
[ 37.890851] Hardware name: Bosch STLA-GSRV2-B0 (DT)
[ 37.895737] pstate: 600000c5 (nZCv daIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 37.902703] pc : __list_del_entry_valid_or_report+0xdc/0x114
[ 37.908390] lr : __list_del_entry_valid_or_report+0xdc/0x114
[ 37.914059] sp : ffff800080003db0
[ 37.917375] x29: ffff800080003db0 x28: 0000000000000007 x27: ffff800080e50000
[ 37.924521] x26: 0000000000000000 x25: ffff0000016abb50 x24: dead000000000122
[ 37.931666] x23: ffff0000016abb78 x22: ffff0000016ab080 x21: ffff800080003de0
[ 37.938810] x20: ffff00000255bc00 x19: ffff00000255b800 x18: 000000000000000a
[ 37.945956] x17: 20747562202c3832 x16: 6362353532303030 x15: 0720072007200720
[ 37.953101] x14: 0720072007200720 x13: 0720072007200720 x12: 00000000ffffffea
[ 37.960248] x11: ffff800080003b18 x10: 00000000ffffefff x9 : ffff800080f5b568
[ 37.967396] x8 : ffff800080f5b5c0 x7 : 0000000000017fe8 x6 : c0000000ffffefff
[ 37.974542] x5 : ffff00000fea6688 x4 : 0000000000000000 x3 : 0000000000000000
[ 37.981686] x2 : 0000000000000000 x1 : ffff800080ef2b40 x0 : 000000000000006d
[ 37.988832] Call trace:
[ 37.991281] __list_del_entry_valid_or_report+0xdc/0x114 (P)
[ 37.996959] ti_csi2rx_dma_callback+0x84/0x1c4
[ 38.001419] udma_vchan_complete+0x1e0/0x344
[ 38.005705] tasklet_action_common+0x118/0x310
[ 38.010163] tasklet_action+0x30/0x3c
[ 38.013832] handle_softirqs+0x10c/0x2e0
[ 38.017761] __do_softirq+0x14/0x20
[ 38.021256] ____do_softirq+0x10/0x20
[ 38.024931] call_on_irq_stack+0x24/0x60
[ 38.028873] do_softirq_own_stack+0x1c/0x40
[ 38.033064] __irq_exit_rcu+0x130/0x15c
[ 38.036909] irq_exit_rcu+0x10/0x20
[ 38.040403] el1_interrupt+0x38/0x60
[ 38.043987] el1h_64_irq_handler+0x18/0x24
[ 38.048091] el1h_64_irq+0x6c/0x70
[ 38.051501] default_idle_call+0x34/0xe0 (P)
[ 38.055783] do_idle+0x1f8/0x250
[ 38.059021] cpu_startup_entry+0x34/0x3c
[ 38.062951] rest_init+0xb4/0xc0
[ 38.066186] console_on_rootfs+0x0/0x6c
[ 38.070031] __primary_switched+0x88/0x90
[ 38.074059] Code: b00037e0 91378000 f9400462 97e9bf49 (d4210000)
[ 38.080168] ---[ end trace 0000000000000000 ]---
[ 38.084795] Kernel panic - not syncing: Oops - BUG: Fatal exception in interrupt
[ 38.092197] SMP: stopping secondary CPUs
[ 38.096139] Kernel Offset: disabled
[ 38.099631] CPU features: 0x0000,00002000,02000801,0400420b
[ 38.105202] Memory Limit: none
[ 38.108260] ---[ end Kernel panic - not syncing: Oops - BUG: Fatal exception in interrupt ]---
Published Aug 22, 2025 · Updated Jul 30, 2026
High · CVSS 7.8
In the Linux kernel, the following vulnerability has been resolved:
vsock: Do not allow binding to VMADDR_PORT_ANY
It is possible for a vsock to autobind to VMADDR_PORT_ANY. This can
cause a use-after-free when a connection is made to the bound socket.
The socket returned by accept() also has port VMADDR_PORT_ANY but is not
on the list of unbound sockets. Binding it will result in an extra
refcount decrement similar to the one fixed in fcdd2242c023 (vsock: Keep
the binding until socket destruction).
Modify the check in __vsock_bind_connectible() to also prevent binding
to VMADDR_PORT_ANY.
Published Aug 22, 2025 · Updated Jul 30, 2026
High · CVSS 7.8
In the Linux kernel, the following vulnerability has been resolved:
net/packet: fix a race in packet_set_ring() and packet_notifier()
When packet_set_ring() releases po->bind_lock, another thread can
run packet_notifier() and process an NETDEV_UP event.
This race and the fix are both similar to that of commit 15fe076edea7
("net/packet: fix a race in packet_bind() and packet_notifier()").
There too the packet_notifier NETDEV_UP event managed to run while a
po->bind_lock critical section had to be temporarily released. And
the fix was similarly to temporarily set po->num to zero to keep
the socket unhooked until the lock is retaken.
The po->bind_lock in packet_set_ring and packet_notifier precede the
introduction of git history.
Published Aug 22, 2025 · Updated Jul 30, 2026
High · CVSS 7.8
In the Linux kernel, the following vulnerability has been resolved:
tls: handle data disappearing from under the TLS ULP
TLS expects that it owns the receive queue of the TCP socket.
This cannot be guaranteed in case the reader of the TCP socket
entered before the TLS ULP was installed, or uses some non-standard
read API (eg. zerocopy ones). Replace the WARN_ON() and a buggy
early exit (which leaves anchor pointing to a freed skb) with real
error handling. Wipe the parsing state and tell the reader to retry.
We already reload the anchor every time we (re)acquire the socket lock,
so the only condition we need to avoid is an out of bounds read
(not having enough bytes in the socket for previously parsed record len).
If some data was read from under TLS but there's enough in the queue
we'll reload and decrypt what is most likely not a valid TLS record.
Leading to some undefined behavior from TLS perspective (corrupting
a stream? missing an alert? missing an attack?) but no kernel crash
should take place.
Published Aug 22, 2025 · Updated Jul 30, 2026
High · CVSS 7.8
In the Linux kernel, the following vulnerability has been resolved:
fs/ntfs3: cancle set bad inode after removing name fails
The reproducer uses a file0 on a ntfs3 file system with a corrupted i_link.
When renaming, the file0's inode is marked as a bad inode because the file
name cannot be deleted.
The underlying bug is that make_bad_inode() is called on a live inode.
In some cases it's "icache lookup finds a normal inode, d_splice_alias()
is called to attach it to dentry, while another thread decides to call
make_bad_inode() on it - that would evict it from icache, but we'd already
found it there earlier".
In some it's outright "we have an inode attached to dentry - that's how we
got it in the first place; let's call make_bad_inode() on it just for shits
and giggles".
Published Aug 19, 2025 · Updated Jul 30, 2026
High · CVSS 7.8
In the Linux kernel, the following vulnerability has been resolved:
eventpoll: Fix semi-unbounded recursion
Ensure that epoll instances can never form a graph deeper than
EP_MAX_NESTS+1 links.
Currently, ep_loop_check_proc() ensures that the graph is loop-free and
does some recursion depth checks, but those recursion depth checks don't
limit the depth of the resulting tree for two reasons:
- They don't look upwards in the tree.
- If there are multiple downwards paths of different lengths, only one of
the paths is actually considered for the depth check since commit
28d82dc1c4ed ("epoll: limit paths").
Essentially, the current recursion depth check in ep_loop_check_proc() just
serves to prevent it from recursing too deeply while checking for loops.
A more thorough check is done in reverse_path_check() after the new graph
edge has already been created; this checks, among other things, that no
paths going upwards from any non-epoll file with a length of more than 5
edges exist. However, this check does not apply to non-epoll files.
As a result, it is possible to recurse to a depth of at least roughly 500,
tested on v6.15. (I am unsure if deeper recursion is possible; and this may
have changed with commit 8c44dac8add7 ("eventpoll: Fix priority inversion
problem").)
To fix it:
1. In ep_loop_check_proc(), note the subtree depth of each visited node,
and use subtree depths for the total depth calculation even when a subtree
has already been visited.
2. Add ep_get_upwards_depth_proc() for similarly determining the maximum
depth of an upwards walk.
3. In ep_loop_check(), use these values to limit the total path length
between epoll nodes to EP_MAX_NESTS edges.
Published Aug 19, 2025 · Updated Jul 30, 2026
High · CVSS 8.6
In the Linux kernel, the following vulnerability has been resolved:
bpf, ktls: Fix data corruption when using bpf_msg_pop_data() in ktls
When sending plaintext data, we initially calculated the corresponding
ciphertext length. However, if we later reduced the plaintext data length
via socket policy, we failed to recalculate the ciphertext length.
This results in transmitting buffers containing uninitialized data during
ciphertext transmission.
This causes uninitialized bytes to be appended after a complete
"Application Data" packet, leading to errors on the receiving end when
parsing TLS record.
Published Aug 19, 2025 · Updated Jul 30, 2026
High · CVSS 7.8
In the Linux kernel, the following vulnerability has been resolved:
bpf: handle jset (if a & b ...) as a jump in CFG computation
BPF_JSET is a conditional jump and currently verifier.c:can_jump()
does not know about that. This can lead to incorrect live registers
and SCC computation.
E.g. in the following example:
1: r0 = 1;
2: r2 = 2;
3: if r1 & 0x7 goto +1;
4: exit;
5: r0 = r2;
6: exit;
W/o this fix insn_successors(3) will return only (4), a jump to (5)
would be missed and r2 won't be marked as alive at (3).
Published Aug 19, 2025 · Updated Jul 30, 2026
High · CVSS 7.8
In the Linux kernel, the following vulnerability has been resolved:
wifi: rtl818x: Kill URBs before clearing tx status queue
In rtl8187_stop() move the call of usb_kill_anchored_urbs() before clearing
b_tx_status.queue. This change prevents callbacks from using already freed
skb due to anchor was not killed before freeing such skb.
BUG: kernel NULL pointer dereference, address: 0000000000000080
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 0 P4D 0
Oops: Oops: 0000 [#1] SMP NOPTI
CPU: 7 UID: 0 PID: 0 Comm: swapper/7 Not tainted 6.15.0 #8 PREEMPT(voluntary)
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 0.0.0 02/06/2015
RIP: 0010:ieee80211_tx_status_irqsafe+0x21/0xc0 [mac80211]
Call Trace:
<IRQ>
rtl8187_tx_cb+0x116/0x150 [rtl8187]
__usb_hcd_giveback_urb+0x9d/0x120
usb_giveback_urb_bh+0xbb/0x140
process_one_work+0x19b/0x3c0
bh_worker+0x1a7/0x210
tasklet_action+0x10/0x30
handle_softirqs+0xf0/0x340
__irq_exit_rcu+0xcd/0xf0
common_interrupt+0x85/0xa0
</IRQ>
Tested on RTL8187BvE device.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Published Aug 19, 2025 · Updated Jul 30, 2026
High · CVSS 8.8
In the Linux kernel, the following vulnerability has been resolved:
wifi: ath11k: clear initialized flag for deinit-ed srng lists
In a number of cases we see kernel panics on resume due
to ath11k kernel page fault, which happens under the
following circumstances:
1) First ath11k_hal_dump_srng_stats() call
Last interrupt received for each group:
ath11k_pci 0000:01:00.0: group_id 0 22511ms before
ath11k_pci 0000:01:00.0: group_id 1 14440788ms before
[..]
ath11k_pci 0000:01:00.0: failed to receive control response completion, polling..
ath11k_pci 0000:01:00.0: Service connect timeout
ath11k_pci 0000:01:00.0: failed to connect to HTT: -110
ath11k_pci 0000:01:00.0: failed to start core: -110
ath11k_pci 0000:01:00.0: firmware crashed: MHI_CB_EE_RDDM
ath11k_pci 0000:01:00.0: already resetting count 2
ath11k_pci 0000:01:00.0: failed to wait wlan mode request (mode 4): -110
ath11k_pci 0000:01:00.0: qmi failed to send wlan mode off: -110
ath11k_pci 0000:01:00.0: failed to reconfigure driver on crash recovery
[..]
2) At this point reconfiguration fails (we have 2 resets) and
ath11k_core_reconfigure_on_crash() calls ath11k_hal_srng_deinit()
which destroys srng lists. However, it does not reset per-list
->initialized flag.
3) Second ath11k_hal_dump_srng_stats() call sees stale ->initialized
flag and attempts to dump srng stats:
Last interrupt received for each group:
ath11k_pci 0000:01:00.0: group_id 0 66785ms before
ath11k_pci 0000:01:00.0: group_id 1 14485062ms before
ath11k_pci 0000:01:00.0: group_id 2 14485062ms before
ath11k_pci 0000:01:00.0: group_id 3 14485062ms before
ath11k_pci 0000:01:00.0: group_id 4 14780845ms before
ath11k_pci 0000:01:00.0: group_id 5 14780845ms before
ath11k_pci 0000:01:00.0: group_id 6 14485062ms before
ath11k_pci 0000:01:00.0: group_id 7 66814ms before
ath11k_pci 0000:01:00.0: group_id 8 68997ms before
ath11k_pci 0000:01:00.0: group_id 9 67588ms before
ath11k_pci 0000:01:00.0: group_id 10 69511ms before
BUG: unable to handle page fault for address: ffffa007404eb010
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 100000067 P4D 100000067 PUD 10022d067 PMD 100b01067 PTE 0
Oops: 0000 [#1] PREEMPT SMP NOPTI
RIP: 0010:ath11k_hal_dump_srng_stats+0x2b4/0x3b0 [ath11k]
Call Trace:
<TASK>
? __die_body+0xae/0xb0
? page_fault_oops+0x381/0x3e0
? exc_page_fault+0x69/0xa0
? asm_exc_page_fault+0x22/0x30
? ath11k_hal_dump_srng_stats+0x2b4/0x3b0 [ath11k (HASH:6cea 4)]
ath11k_qmi_driver_event_work+0xbd/0x1050 [ath11k (HASH:6cea 4)]
worker_thread+0x389/0x930
kthread+0x149/0x170
Clear per-list ->initialized flag in ath11k_hal_srng_deinit().
Published Aug 19, 2025 · Updated Jul 30, 2026
High · CVSS 8.8
In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: mt7925: fix off by one in mt7925_mcu_hw_scan()
The ssid->ssids[] and sreq->ssids[] arrays have MT7925_RNR_SCAN_MAX_BSSIDS
elements so this >= needs to be > to prevent an out of bounds access.
Published Aug 19, 2025 · Updated Jul 30, 2026
High · CVSS 8.8
In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: mt7996: Fix possible OOB access in mt7996_tx()
Fis possible Out-Of-Boundary access in mt7996_tx routine if link_id is
set to IEEE80211_LINK_UNSPECIFIED
Published Aug 19, 2025 · Updated Jul 30, 2026
High · CVSS 7.8
In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: fix use-after-free in amdgpu_userq_suspend+0x51a/0x5a0
[ +0.000020] BUG: KASAN: slab-use-after-free in amdgpu_userq_suspend+0x51a/0x5a0 [amdgpu]
[ +0.000817] Read of size 8 at addr ffff88812eec8c58 by task amd_pci_unplug/1733
[ +0.000027] CPU: 10 UID: 0 PID: 1733 Comm: amd_pci_unplug Tainted: G W 6.14.0+ #2
[ +0.000009] Tainted: [W]=WARN
[ +0.000003] Hardware name: ASUS System Product Name/ROG STRIX B550-F GAMING (WI-FI), BIOS 1401 12/03/2020
[ +0.000004] Call Trace:
[ +0.000004] <TASK>
[ +0.000003] dump_stack_lvl+0x76/0xa0
[ +0.000011] print_report+0xce/0x600
[ +0.000009] ? srso_return_thunk+0x5/0x5f
[ +0.000006] ? kasan_complete_mode_report_info+0x76/0x200
[ +0.000007] ? kasan_addr_to_slab+0xd/0xb0
[ +0.000006] ? amdgpu_userq_suspend+0x51a/0x5a0 [amdgpu]
[ +0.000707] kasan_report+0xbe/0x110
[ +0.000006] ? amdgpu_userq_suspend+0x51a/0x5a0 [amdgpu]
[ +0.000541] __asan_report_load8_noabort+0x14/0x30
[ +0.000005] amdgpu_userq_suspend+0x51a/0x5a0 [amdgpu]
[ +0.000535] ? stop_cpsch+0x396/0x600 [amdgpu]
[ +0.000556] ? stop_cpsch+0x429/0x600 [amdgpu]
[ +0.000536] ? __pfx_amdgpu_userq_suspend+0x10/0x10 [amdgpu]
[ +0.000536] ? srso_return_thunk+0x5/0x5f
[ +0.000004] ? kgd2kfd_suspend+0x132/0x1d0 [amdgpu]
[ +0.000542] amdgpu_device_fini_hw+0x581/0xe90 [amdgpu]
[ +0.000485] ? down_write+0xbb/0x140
[ +0.000007] ? __mutex_unlock_slowpath.constprop.0+0x317/0x360
[ +0.000005] ? __pfx_amdgpu_device_fini_hw+0x10/0x10 [amdgpu]
[ +0.000482] ? __kasan_check_write+0x14/0x30
[ +0.000004] ? srso_return_thunk+0x5/0x5f
[ +0.000004] ? up_write+0x55/0xb0
[ +0.000007] ? srso_return_thunk+0x5/0x5f
[ +0.000005] ? blocking_notifier_chain_unregister+0x6c/0xc0
[ +0.000008] amdgpu_driver_unload_kms+0x69/0x90 [amdgpu]
[ +0.000484] amdgpu_pci_remove+0x93/0x130 [amdgpu]
[ +0.000482] pci_device_remove+0xae/0x1e0
[ +0.000008] device_remove+0xc7/0x180
[ +0.000008] device_release_driver_internal+0x3d4/0x5a0
[ +0.000007] device_release_driver+0x12/0x20
[ +0.000004] pci_stop_bus_device+0x104/0x150
[ +0.000006] pci_stop_and_remove_bus_device_locked+0x1b/0x40
[ +0.000005] remove_store+0xd7/0xf0
[ +0.000005] ? __pfx_remove_store+0x10/0x10
[ +0.000006] ? __pfx__copy_from_iter+0x10/0x10
[ +0.000006] ? __pfx_dev_attr_store+0x10/0x10
[ +0.000006] dev_attr_store+0x3f/0x80
[ +0.000006] sysfs_kf_write+0x125/0x1d0
[ +0.000004] ? srso_return_thunk+0x5/0x5f
[ +0.000005] ? __kasan_check_write+0x14/0x30
[ +0.000005] kernfs_fop_write_iter+0x2ea/0x490
[ +0.000005] ? rw_verify_area+0x70/0x420
[ +0.000005] ? __pfx_kernfs_fop_write_iter+0x10/0x10
[ +0.000006] vfs_write+0x90d/0xe70
[ +0.000005] ? srso_return_thunk+0x5/0x5f
[ +0.000005] ? __pfx_vfs_write+0x10/0x10
[ +0.000004] ? local_clock+0x15/0x30
[ +0.000008] ? srso_return_thunk+0x5/0x5f
[ +0.000004] ? __kasan_slab_free+0x5f/0x80
[ +0.000005] ? srso_return_thunk+0x5/0x5f
[ +0.000004] ? __kasan_check_read+0x11/0x20
[ +0.000004] ? srso_return_thunk+0x5/0x5f
[ +0.000004] ? fdget_pos+0x1d3/0x500
[ +0.000007] ksys_write+0x119/0x220
[ +0.000005] ? putname+0x1c/0x30
[ +0.000006] ? __pfx_ksys_write+0x10/0x10
[ +0.000007] __x64_sys_write+0x72/0xc0
[ +0.000006] x64_sys_call+0x18ab/0x26f0
[ +0.000006] do_syscall_64+0x7c/0x170
[ +0.000004] ? srso_return_thunk+0x5/0x5f
[ +0.000004] ? __pfx___x64_sys_openat+0x10/0x10
[ +0.000006] ? srso_return_thunk+0x5/0x5f
[ +0.000004] ? __kasan_check_read+0x11/0x20
[ +0.000003] ? srso_return_thunk+0x5/0x5f
[ +0.000004] ? fpregs_assert_state_consistent+0x21/0xb0
[ +0.000006] ? srso_return_thunk+0x5/0x5f
[ +0.000004] ? syscall_exit_to_user_mode+0x4e/0x240
[ +0.000005] ? srso_return_thunk+0x5/0x5f
[ +0.000004] ? do_syscall_64+0x88/0x170
[ +0.000003] ? srso_return_thunk+0x5/0x5f
[ +0.000004] ? irqentry_exit+0x43/0x50
[ +0.000004] ? srso_return_thunk+0x5
---truncated---
Published Aug 19, 2025 · Updated Jul 30, 2026
High · CVSS 7.8
In the Linux kernel, the following vulnerability has been resolved:
drm/panthor: Fix UAF in panthor_gem_create_with_handle() debugfs code
The object is potentially already gone after the drm_gem_object_put().
In general the object should be fully constructed before calling
drm_gem_handle_create(), except the debugfs tracking uses a separate
lock and list and separate flag to denotate whether the object is
actually initialized.
Since I'm touching this all anyway simplify this by only adding the
object to the debugfs when it's ready for that, which allows us to
delete that separate flag. panthor_gem_debugfs_bo_rm() already checks
whether we've actually been added to the list or this is some error
path cleanup.
v2: Fix build issues for !CONFIG_DEBUGFS (Adrián)
v3: Add linebreak and remove outdated comment (Liviu)
Published Aug 19, 2025 · Updated Jul 30, 2026
High · CVSS 7.8
In the Linux kernel, the following vulnerability has been resolved:
xen: fix UAF in dmabuf_exp_from_pages()
[dma_buf_fd() fixes; no preferences regarding the tree it goes through -
up to xen folks]
As soon as we'd inserted a file reference into descriptor table, another
thread could close it. That's fine for the case when all we are doing is
returning that descriptor to userland (it's a race, but it's a userland
race and there's nothing the kernel can do about it). However, if we
follow fd_install() with any kind of access to objects that would be
destroyed on close (be it the struct file itself or anything destroyed
by its ->release()), we have a UAF.
dma_buf_fd() is a combination of reserving a descriptor and fd_install().
gntdev dmabuf_exp_from_pages() calls it and then proceeds to access the
objects destroyed on close - starting with gntdev_dmabuf itself.
Fix that by doing reserving descriptor before anything else and do
fd_install() only when everything had been set up.
Published Aug 19, 2025 · Updated Jul 30, 2026
High · CVSS 7.8
In the Linux kernel, the following vulnerability has been resolved:
iommu/vt-d: Fix UAF on sva unbind with pending IOPFs
Commit 17fce9d2336d ("iommu/vt-d: Put iopf enablement in domain attach
path") disables IOPF on device by removing the device from its IOMMU's
IOPF queue when the last IOPF-capable domain is detached from the device.
Unfortunately, it did this in a wrong place where there are still pending
IOPFs. As a result, a use-after-free error is potentially triggered and
eventually a kernel panic with a kernel trace similar to the following:
refcount_t: underflow; use-after-free.
WARNING: CPU: 3 PID: 313 at lib/refcount.c:28 refcount_warn_saturate+0xd8/0xe0
Workqueue: iopf_queue/dmar0-iopfq iommu_sva_handle_iopf
Call Trace:
<TASK>
iopf_free_group+0xe/0x20
process_one_work+0x197/0x3d0
worker_thread+0x23a/0x350
? rescuer_thread+0x4a0/0x4a0
kthread+0xf8/0x230
? finish_task_switch.isra.0+0x81/0x260
? kthreads_online_cpu+0x110/0x110
? kthreads_online_cpu+0x110/0x110
ret_from_fork+0x13b/0x170
? kthreads_online_cpu+0x110/0x110
ret_from_fork_asm+0x11/0x20
</TASK>
---[ end trace 0000000000000000 ]---
The intel_pasid_tear_down_entry() function is responsible for blocking
hardware from generating new page faults and flushing all in-flight
ones. Therefore, moving iopf_for_domain_remove() after this function
should resolve this.
Published Aug 19, 2025 · Updated Jul 30, 2026
High · CVSS 7.8
In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_sync: fix double free in 'hci_discovery_filter_clear()'
Function 'hci_discovery_filter_clear()' frees 'uuids' array and then
sets it to NULL. There is a tiny chance of the following race:
'hci_cmd_sync_work()'
'update_passive_scan_sync()'
'hci_update_passive_scan_sync()'
'hci_discovery_filter_clear()'
kfree(uuids);
<-------------------------preempted-------------------------------->
'start_service_discovery()'
'hci_discovery_filter_clear()'
kfree(uuids); // DOUBLE FREE
<-------------------------preempted-------------------------------->
uuids = NULL;
To fix it let's add locking around 'kfree()' call and NULL pointer
assignment. Otherwise the following backtrace fires:
[ ] ------------[ cut here ]------------
[ ] kernel BUG at mm/slub.c:547!
[ ] Internal error: Oops - BUG: 00000000f2000800 [#1] PREEMPT SMP
[ ] CPU: 3 UID: 0 PID: 246 Comm: bluetoothd Tainted: G O 6.12.19-kernel #1
[ ] Tainted: [O]=OOT_MODULE
[ ] pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ ] pc : __slab_free+0xf8/0x348
[ ] lr : __slab_free+0x48/0x348
...
[ ] Call trace:
[ ] __slab_free+0xf8/0x348
[ ] kfree+0x164/0x27c
[ ] start_service_discovery+0x1d0/0x2c0
[ ] hci_sock_sendmsg+0x518/0x924
[ ] __sock_sendmsg+0x54/0x60
[ ] sock_write_iter+0x98/0xf8
[ ] do_iter_readv_writev+0xe4/0x1c8
[ ] vfs_writev+0x128/0x2b0
[ ] do_writev+0xfc/0x118
[ ] __arm64_sys_writev+0x20/0x2c
[ ] invoke_syscall+0x68/0xf0
[ ] el0_svc_common.constprop.0+0x40/0xe0
[ ] do_el0_svc+0x1c/0x28
[ ] el0_svc+0x30/0xd0
[ ] el0t_64_sync_handler+0x100/0x12c
[ ] el0t_64_sync+0x194/0x198
[ ] Code: 8b0002e6 eb17031f 54fffbe1 d503201f (d4210000)
[ ] ---[ end trace 0000000000000000 ]---
Published Aug 19, 2025 · Updated Jul 30, 2026
High · CVSS 8.8
In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_devcd_dump: fix out-of-bounds via dev_coredumpv
Currently both dev_coredumpv and skb_put_data in hci_devcd_dump use
hdev->dump.head. However, dev_coredumpv can free the buffer. From
dev_coredumpm_timeout documentation, which is used by dev_coredumpv:
> Creates a new device coredump for the given device. If a previous one hasn't
> been read yet, the new coredump is discarded. The data lifetime is determined
> by the device coredump framework and when it is no longer needed the @free
> function will be called to free the data.
If the data has not been read by the userspace yet, dev_coredumpv will
discard new buffer, freeing hdev->dump.head. This leads to
vmalloc-out-of-bounds error when skb_put_data tries to access
hdev->dump.head.
A crash report from syzbot illustrates this:
==================================================================
BUG: KASAN: vmalloc-out-of-bounds in skb_put_data
include/linux/skbuff.h:2752 [inline]
BUG: KASAN: vmalloc-out-of-bounds in hci_devcd_dump+0x142/0x240
net/bluetooth/coredump.c:258
Read of size 140 at addr ffffc90004ed5000 by task kworker/u9:2/5844
CPU: 1 UID: 0 PID: 5844 Comm: kworker/u9:2 Not tainted
6.14.0-syzkaller-10892-g4e82c87058f4 #0 PREEMPT(full)
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS
Google 02/12/2025
Workqueue: hci0 hci_devcd_timeout
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:94 [inline]
dump_stack_lvl+0x116/0x1f0 lib/dump_stack.c:120
print_address_description mm/kasan/report.c:408 [inline]
print_report+0xc3/0x670 mm/kasan/report.c:521
kasan_report+0xe0/0x110 mm/kasan/report.c:634
check_region_inline mm/kasan/generic.c:183 [inline]
kasan_check_range+0xef/0x1a0 mm/kasan/generic.c:189
__asan_memcpy+0x23/0x60 mm/kasan/shadow.c:105
skb_put_data include/linux/skbuff.h:2752 [inline]
hci_devcd_dump+0x142/0x240 net/bluetooth/coredump.c:258
hci_devcd_timeout+0xb5/0x2e0 net/bluetooth/coredump.c:413
process_one_work+0x9cc/0x1b70 kernel/workqueue.c:3238
process_scheduled_works kernel/workqueue.c:3319 [inline]
worker_thread+0x6c8/0xf10 kernel/workqueue.c:3400
kthread+0x3c2/0x780 kernel/kthread.c:464
ret_from_fork+0x45/0x80 arch/x86/kernel/process.c:153
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:245
</TASK>
The buggy address ffffc90004ed5000 belongs to a vmalloc virtual mapping
Memory state around the buggy address:
ffffc90004ed4f00: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8
ffffc90004ed4f80: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8
>ffffc90004ed5000: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8
^
ffffc90004ed5080: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8
ffffc90004ed5100: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8
==================================================================
To avoid this issue, reorder dev_coredumpv to be called after
skb_put_data that does not free the data.
Published Aug 19, 2025 · Updated Jul 30, 2026
High · CVSS 7.5
In the Linux kernel, the following vulnerability has been resolved:
net/mlx5e: Remove skb secpath if xfrm state is not found
Hardware returns a unique identifier for a decrypted packet's xfrm
state, this state is looked up in an xarray. However, the state might
have been freed by the time of this lookup.
Currently, if the state is not found, only a counter is incremented.
The secpath (sp) extension on the skb is not removed, resulting in
sp->len becoming 0.
Subsequently, functions like __xfrm_policy_check() attempt to access
fields such as xfrm_input_state(skb)->xso.type (which dereferences
sp->xvec[sp->len - 1]) without first validating sp->len. This leads to
a crash when dereferencing an invalid state pointer.
This patch prevents the crash by explicitly removing the secpath
extension from the skb if the xfrm state is not found after hardware
decryption. This ensures downstream functions do not operate on a
zero-length secpath.
BUG: unable to handle page fault for address: ffffffff000002c8
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 282e067 P4D 282e067 PUD 0
Oops: Oops: 0000 [#1] SMP
CPU: 12 UID: 0 PID: 0 Comm: swapper/12 Not tainted 6.15.0-rc7_for_upstream_min_debug_2025_05_27_22_44 #1 NONE
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
RIP: 0010:__xfrm_policy_check+0x61a/0xa30
Code: b6 77 7f 83 e6 02 74 14 4d 8b af d8 00 00 00 41 0f b6 45 05 c1 e0 03 48 98 49 01 c5 41 8b 45 00 83 e8 01 48 98 49 8b 44 c5 10 <0f> b6 80 c8 02 00 00 83 e0 0c 3c 04 0f 84 0c 02 00 00 31 ff 80 fa
RSP: 0018:ffff88885fb04918 EFLAGS: 00010297
RAX: ffffffff00000000 RBX: 0000000000000002 RCX: 0000000000000000
RDX: 0000000000000002 RSI: 0000000000000002 RDI: 0000000000000000
RBP: ffffffff8311af80 R08: 0000000000000020 R09: 00000000c2eda353
R10: ffff88812be2bbc8 R11: 000000001faab533 R12: ffff88885fb049c8
R13: ffff88812be2bbc8 R14: 0000000000000000 R15: ffff88811896ae00
FS: 0000000000000000(0000) GS:ffff8888dca82000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: ffffffff000002c8 CR3: 0000000243050002 CR4: 0000000000372eb0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<IRQ>
? try_to_wake_up+0x108/0x4c0
? udp4_lib_lookup2+0xbe/0x150
? udp_lib_lport_inuse+0x100/0x100
? __udp4_lib_lookup+0x2b0/0x410
__xfrm_policy_check2.constprop.0+0x11e/0x130
udp_queue_rcv_one_skb+0x1d/0x530
udp_unicast_rcv_skb+0x76/0x90
__udp4_lib_rcv+0xa64/0xe90
ip_protocol_deliver_rcu+0x20/0x130
ip_local_deliver_finish+0x75/0xa0
ip_local_deliver+0xc1/0xd0
? ip_protocol_deliver_rcu+0x130/0x130
ip_sublist_rcv+0x1f9/0x240
? ip_rcv_finish_core+0x430/0x430
ip_list_rcv+0xfc/0x130
__netif_receive_skb_list_core+0x181/0x1e0
netif_receive_skb_list_internal+0x200/0x360
? mlx5e_build_rx_skb+0x1bc/0xda0 [mlx5_core]
gro_receive_skb+0xfd/0x210
mlx5e_handle_rx_cqe_mpwrq+0x141/0x280 [mlx5_core]
mlx5e_poll_rx_cq+0xcc/0x8e0 [mlx5_core]
? mlx5e_handle_rx_dim+0x91/0xd0 [mlx5_core]
mlx5e_napi_poll+0x114/0xab0 [mlx5_core]
__napi_poll+0x25/0x170
net_rx_action+0x32d/0x3a0
? mlx5_eq_comp_int+0x8d/0x280 [mlx5_core]
? notifier_call_chain+0x33/0xa0
handle_softirqs+0xda/0x250
irq_exit_rcu+0x6d/0xc0
common_interrupt+0x81/0xa0
</IRQ>
Published Aug 19, 2025 · Updated Jul 30, 2026
High · CVSS 7.8
In the Linux kernel, the following vulnerability has been resolved:
bpf, arm64: Fix fp initialization for exception boundary
In the ARM64 BPF JIT when prog->aux->exception_boundary is set for a BPF
program, find_used_callee_regs() is not called because for a program
acting as exception boundary, all callee saved registers are saved.
find_used_callee_regs() sets `ctx->fp_used = true;` when it sees FP
being used in any of the instructions.
For programs acting as exception boundary, ctx->fp_used remains false
even if frame pointer is used by the program and therefore, FP is not
set-up for such programs in the prologue. This can cause the kernel to
crash due to a pagefault.
Fix it by setting ctx->fp_used = true for exception boundary programs as
fp is always saved in such programs.
Published Aug 19, 2025 · Updated Jul 30, 2026
High · CVSS 7
In the Linux kernel, the following vulnerability has been resolved:
padata: Fix pd UAF once and for all
There is a race condition/UAF in padata_reorder that goes back
to the initial commit. A reference count is taken at the start
of the process in padata_do_parallel, and released at the end in
padata_serial_worker.
This reference count is (and only is) required for padata_replace
to function correctly. If padata_replace is never called then
there is no issue.
In the function padata_reorder which serves as the core of padata,
as soon as padata is added to queue->serial.list, and the associated
spin lock released, that padata may be processed and the reference
count on pd would go away.
Fix this by getting the next padata before the squeue->serial lock
is released.
In order to make this possible, simplify padata_reorder by only
calling it once the next padata arrives.
Published Aug 19, 2025 · Updated Jul 30, 2026
High · CVSS 7.8
In the Linux kernel, the following vulnerability has been resolved:
RDMA/hns: Fix double destruction of rsv_qp
rsv_qp may be double destroyed in error flow, first in free_mr_init(),
and then in hns_roce_exit(). Fix it by moving the free_mr_init() call
into hns_roce_v2_init().
list_del corruption, ffff589732eb9b50->next is LIST_POISON1 (dead000000000100)
WARNING: CPU: 8 PID: 1047115 at lib/list_debug.c:53 __list_del_entry_valid+0x148/0x240
...
Call trace:
__list_del_entry_valid+0x148/0x240
hns_roce_qp_remove+0x4c/0x3f0 [hns_roce_hw_v2]
hns_roce_v2_destroy_qp_common+0x1dc/0x5f4 [hns_roce_hw_v2]
hns_roce_v2_destroy_qp+0x22c/0x46c [hns_roce_hw_v2]
free_mr_exit+0x6c/0x120 [hns_roce_hw_v2]
hns_roce_v2_exit+0x170/0x200 [hns_roce_hw_v2]
hns_roce_exit+0x118/0x350 [hns_roce_hw_v2]
__hns_roce_hw_v2_init_instance+0x1c8/0x304 [hns_roce_hw_v2]
hns_roce_hw_v2_reset_notify_init+0x170/0x21c [hns_roce_hw_v2]
hns_roce_hw_v2_reset_notify+0x6c/0x190 [hns_roce_hw_v2]
hclge_notify_roce_client+0x6c/0x160 [hclge]
hclge_reset_rebuild+0x150/0x5c0 [hclge]
hclge_reset+0x10c/0x140 [hclge]
hclge_reset_subtask+0x80/0x104 [hclge]
hclge_reset_service_task+0x168/0x3ac [hclge]
hclge_service_task+0x50/0x100 [hclge]
process_one_work+0x250/0x9a0
worker_thread+0x324/0x990
kthread+0x190/0x210
ret_from_fork+0x10/0x18
Published Aug 19, 2025 · Updated Jul 30, 2026
High · CVSS 7.8
In the Linux kernel, the following vulnerability has been resolved:
ext4: fix inode use after free in ext4_end_io_rsv_work()
In ext4_io_end_defer_completion(), check if io_end->list_vec is empty to
avoid adding an io_end that requires no conversion to the
i_rsv_conversion_list, which in turn prevents starting an unnecessary
worker. An ext4_emergency_state() check is also added to avoid attempting
to abort the journal in an emergency state.
Additionally, ext4_put_io_end_defer() is refactored to call
ext4_io_end_defer_completion() directly instead of being open-coded.
This also prevents starting an unnecessary worker when EXT4_IO_END_FAILED
is set but data_err=abort is not enabled.
This ensures that the check in ext4_put_io_end_defer() is consistent with
the check in ext4_end_bio(). Otherwise, we might add an io_end to the
i_rsv_conversion_list and then call ext4_finish_bio(), after which the
inode could be freed before ext4_end_io_rsv_work() is called, triggering
a use-after-free issue.
Published Aug 19, 2025 · Updated Jul 30, 2026
