T1564.011: Ignore Process Interrupts
Adversaries may evade defensive mechanisms by executing commands that hide from process interrupt signals. Many operating systems use signals to deliver messages to control process behavior. Command interpreters often include specific commands/flags that ignore errors and other hangups, such as when the user of the active session logs off.[1] These interrupt signals may also be used by defensive tools and/or analysts to pause or terminate specified running processes.
Adversaries may invoke processes using `nohup`, PowerShell `-ErrorAction SilentlyContinue`, or similar commands that may be immune to hangups.[2][3] This may enable malicious commands and malware to continue execution through system events that would otherwise terminate its execution, such as users logging off or the termination of its C2 network connection.
Hiding from process interrupt signals may allow malware to continue execution, but unlike Trap this does not establish Persistence since the process will not be re-invoked once actually terminated.
Security context for executives and security teams
T1564.011: Ignore Process Interrupts describes Adversaries may evade defensive mechanisms by executing commands that hide from process interrupt signals. Many operating systems use signals to deliver messages to control process behavior. Command interpreters often include specific commands/flags that ignore errors and other hangups, such as when the user of the active session logs off.(Citation: Linux Signal Man) These interrupt signals may also be used by defensive tools and/or analysts to pause or terminate specified running processes. Adversaries may invoke ...
Executive priority
T1564.011: Ignore Process Interrupts is an official MITRE ATT&CK technique. Glexia treats it as defensive behavior context for prioritizing monitoring, control validation, and response planning without using the object by itself as an attribution claim.
Technical view
Security teams should validate T1564.011: Ignore Process Interrupts by reviewing the official ATT&CK relationships, mapped tactics (stealth), supported platforms (Linux, macOS, Windows), and available local telemetry before making detection or mitigation decisions.
Likely telemetry
- Official ATT&CK relationships and object metadata
- Network, endpoint, and security-tool telemetry
Detection direction
- Validate whether T1564.011: Ignore Process Interrupts appears in your detection coverage and tabletop scenarios.
- Use the object to align executive risk language with SOC, incident response, and detection engineering work.
- Do not treat ATT&CK relationship context as attribution without corroborating evidence.
Mitigation priorities
- Map the object to existing controls and identify missing telemetry or response ownership.
- Prioritize mitigations that reduce exposure on the listed platforms and tactics.
- Review adjacent ATT&CK relationships before changing policy, detections, or reporting language.
Additional notes and limits
Baseline Glexia take generated from the official MITRE ATT&CK STIX object, source hash, tactics, platforms, and detection fields. It is safe to replace with a richer model-generated take for the same source hash later.
This baseline take is source-grounded and schema-validated, but it does not include environment-specific telemetry, incident evidence, or threat-intelligence corroboration.
Generated from the cited source records. This long-tail analysis has not been individually reviewed by a named human.
Ignore Process Interrupts
Adversaries may evade defensive mechanisms by executing commands that hide from process interrupt signals. Many operating systems use signals to deliver messages to control process behavior. Command interpreters often include specific commands/flags that ignore errors and other hangups, such as when the user of the active session logs off.[1] These interrupt signals may also be used by defensive tools and/or analysts to pause or terminate specified running processes.
Adversaries may invoke processes using `nohup`, PowerShell `-ErrorAction SilentlyContinue`, or similar commands that may be immune to hangups.[2][3] This may enable malicious commands and malware to continue execution through system events that would otherwise terminate its execution, such as users logging off or the termination of its C2 network connection.
Hiding from process interrupt signals may allow malware to continue execution, but unlike Trap this does not establish Persistence since the process will not be re-invoked once actually terminated.
How security teams should use this page
Treat this object as behavior context, not an attribution claim. Validate the related groups, software, data sources, and mitigations against official ATT&CK relationships and your own telemetry before making control-coverage decisions.
Related techniques
This mirrors the MITRE pattern of making group, software, campaign, and technique relationships scannable. Relationship notes come from mirrored ATT&CK relationship text when available.
| Domain | ID | Name | Relationship / procedure |
|---|---|---|---|
| Enterprise | T1564 | Hide Artifacts | This object subtechnique of Hide Artifacts. |
Groups, software, and campaigns
G0094: Kimsuky
Kimsuky is a Democratic People's Republic of Korea (DPRK)-based cyber espionage group that has been active since at least 2012. The group initially targeted South Korean government agencies, think tanks, and subject-matter experts in various fields. Its operations expanded to include the United Nations and organizations in the government, education, business services, and manufacturing sectors across the United States, Japan, Russia, and Europe. Kimsuky has focused collection on foreign policy and national security issues tied to the Korean Peninsula, nuclear policy, and sanctions. Kimsuky operations have overlapped with those of other North Korean state-sponsored cyber espionage actors as a result of ad hoc collaborations or other limited resource sharing.[1][2][3][4][5][6]
Kimsuky was assessed to be responsible for the 2014 Korea Hydro & Nuclear Power Co. compromise; other notable campaigns include Operation STOLEN PENCIL (2018), Operation Kabar Cobra (2019), and Operation Smoke Screen (2019).[7][8][9] In 2023, Kimsuky was observed using commercial large language models (LLMs) to assist with vulnerability research, scripting, social engineering and reconnaissance.[10]
DPRK threat actor cluster boundaries overlap in open source reporting, with some security researchers consolidating all attributed North Korean state-sponsored cyber activity under Lazarus Group, rather than tracking operationally distinct subgroups.
G1048: UNC3886
UNC3886 is a China-nexus cyberespionage group that has been active since at least 2022, targeting defense, technology, and telecommunication organizations located in the United States and the Asia-Pacific-Japan (APJ) regions. UNC3886 has displayed a deep understanding of edge devices and virtualization technologies through the exploitation of zero-day vulnerabilities and the use of novel malware families and utilities.[1][2]
G1041: Sea Turtle
Sea Turtle is a Türkiye-linked threat actor active since at least 2017 performing espionage and service provider compromise operations against victims in Asia, Europe, and North America. Sea Turtle is notable for targeting registrars managing ccTLDs and complex DNS-based intrusions where the threat actor compromised DNS providers to hijack DNS resolution for ultimate victims, enabling Sea Turtle to spoof log in portals and other applications for credential collection.[1][2][3][4]
S1184: BOLDMOVE
BOLDMOVE is a type of backdoor malware written in C linked to People’s Republic of China operations from 2022 through 2023. BOLDMOVE includes both Windows and Linux variants, with some Linux variants specifically designed for FortiGate Firewall devices. BOLDMOVE is linked to zero-day exploitation of CVE-2022-42475 in FortiOSS SSL-VPNs.[1] The record for BOLDMOVE only covers known Linux variants.
S0588: GoldMax
GoldMax is a second-stage C2 backdoor written in Go with Windows and Linux variants that are nearly identical in functionality. GoldMax was discovered in early 2021 during the investigation into the SolarWinds Compromise, and has likely been used by APT29 since at least mid-2019. GoldMax uses multiple defense evasion techniques, including avoiding virtualization execution and masking malicious traffic.[1][2][3]
S1161: BPFDoor
BPFDoor is a Linux based passive long-term backdoor used by China-based threat actors. First seen in 2021, BPFDoor is named after its usage of Berkley Packet Filter (BPF) to execute single task instructions. BPFDoor supports multiple protocols for communicating with a C2 including TCP, UDP, and ICMP and can start local or reverse shells that bypass firewalls using iptables.[1][2]
S9008: Shai-Hulud
Shai-Hulud is a supply chain worm, first reported in September 2025, that spreads through code repositories, including GitHub and NPM packages. It exploits CI/CD pipeline dependencies to propagate to victims and poisons the supply chain by publishing malicious packages. Once inside a victim environment, Shai-Hulud steals credentials and access tokens from compromised repository accounts and exfiltrates them to attacker-controlled servers via encoded GitHub Actions workflows.[1][2][3][4][5][6][7]
S0402: OSX/Shlayer
OSX/Shlayer is a Trojan designed to install adware on macOS that was first discovered in 2018.[1][2]
S9043: Mini Shai-Hulud
Mini Shai-Hulud is a credential stealer and self-replicating supply chain worm, derived from Shai-Hulud, that has been used by TeamPCP to target Continuous Integration and Continuous Delivery/Deployment (CI/CD) workflows since at least 2026. Mini Shai-Hulud can compromise credentials across multiple cloud, container, and AI configuration file paths and can use stolen npm and GitHub OIDC tokens to spread to other packages maintained by the compromised user. Mini Shai-Hulud also has a targeted wiper component and has used multiple C2 and data exfiltration mechanisms.[1][2][3][4][5][6]
All related ATT&CK context
Object version and sync metadata
The fields below describe the current mirrored snapshot. When Glexia retains multiple ATT&CK source imports, you can open the table to compare the same object across releases (hashes and MITRE timestamps). For MITRE’s own release notes and roadmap, see ATT&CK resources — Updates.
Imported snapshots across ATT&CK releases(2)
| Release | Bundle imported | Object version | Modified | Status | Raw hash |
|---|---|---|---|---|---|
| 19.2 | 2.0 | Current bundle | 7efa782e23fa… | ||
| 19.1 | 2.0 | Older bundle | 7efa782e23fa… |
Mirrored ATT&CK source object
The raw object is retained through the mirrored ATT&CK source bundle and object hash. The raw endpoint returns the exact object from the mirrored bundle when available.
External references and citations
MITRE external references are preserved separately from Glexia analysis so citations remain traceable to their original source records.
- [1]Linux Signal Man
Linux man-pages. (2023, April 3). signal(7). Retrieved August 30, 2023.
Open source URL - [2]nohup Linux Man
Meyering, J. (n.d.). nohup(1). Retrieved August 30, 2023.
Open source URL - [3]Microsoft PowerShell SilentlyContinue
Microsoft. (2023, March 2). $DebugPreference. Retrieved August 30, 2023.
Open source URL - [4]mitre-attackT1564.011Open source URL
Source: MITRE ATT&CK®. © 2026 The MITRE Corporation. This work is reproduced and distributed with the permission of The MITRE Corporation. MITRE ATT&CK and ATT&CK are registered trademarks of The MITRE Corporation. Glexia is not affiliated with or endorsed by MITRE.
