LiveActive security incident?Get immediate response
MITRE ATT&CK® Technique

T0800: Activate Firmware Update Mode

Adversaries may activate firmware update mode on devices to prevent expected response functions from engaging in reaction to an emergency or process malfunction. For example, devices such as protection relays may have an operation mode designed for firmware installation. This mode may halt process monitoring and related functions to allow new firmware to be loaded. A device left in update mode may be placed in an inactive holding state if no firmware is provided to it. By entering and leaving a device in this mode, the adversary may deny its usual functionalities.

ICST0800TechniqueObject v1.0Modified
Discuss defensive coverageBack to ATT&CK
Glexia's Take · Automated analysis

Security context for executives and security teams

Automation confidenceMedium

T0800: Activate Firmware Update Mode describes Adversaries may activate firmware update mode on devices to prevent expected response functions from engaging in reaction to an emergency or process malfunction. For example, devices such as protection relays may have an operation mode designed for firmware installation. This mode may halt process monitoring and related functions to allow new firmware to be loaded. A device left in update mode may be placed in an inactive holding state if no firmware is provided to it. By entering and leaving a device in this mode,...

Executive priority

T0800: Activate Firmware Update Mode is an official MITRE ATT&CK technique. Glexia treats it as defensive behavior context for prioritizing monitoring, control validation, and response planning without using the object by itself as an attribution claim.

Technical view

Security teams should validate T0800: Activate Firmware Update Mode by reviewing the official ATT&CK relationships, mapped tactics (inhibit-response-function), supported platforms (None), and available local telemetry before making detection or mitigation decisions.

Likely telemetry

  • Official ATT&CK relationships and object metadata

Detection direction

  • Validate whether T0800: Activate Firmware Update Mode appears in your detection coverage and tabletop scenarios.
  • Use the object to align executive risk language with SOC, incident response, and detection engineering work.
  • Do not treat ATT&CK relationship context as attribution without corroborating evidence.

Mitigation priorities

  • Map the object to existing controls and identify missing telemetry or response ownership.
  • Prioritize mitigations that reduce exposure on the listed platforms and tactics.
  • Review adjacent ATT&CK relationships before changing policy, detections, or reporting language.
Additional notes and limits

Baseline Glexia take generated from the official MITRE ATT&CK STIX object, source hash, tactics, platforms, and detection fields. It is safe to replace with a richer model-generated take for the same source hash later.

This baseline take is source-grounded and schema-validated, but it does not include environment-specific telemetry, incident evidence, or threat-intelligence corroboration.

Generated from the cited source records. This long-tail analysis has not been individually reviewed by a named human.

Official MITRE ATT&CK definition

Activate Firmware Update Mode

Adversaries may activate firmware update mode on devices to prevent expected response functions from engaging in reaction to an emergency or process malfunction. For example, devices such as protection relays may have an operation mode designed for firmware installation. This mode may halt process monitoring and related functions to allow new firmware to be loaded. A device left in update mode may be placed in an inactive holding state if no firmware is provided to it. By entering and leaving a device in this mode, the adversary may deny its usual functionalities.

View the same entry on attack.mitre.org (MITRE-hosted reference; in-page links above use the Glexia ATT&CK library.)

Glexia analysis

How security teams should use this page

Treat this object as behavior context, not an attribution claim. Validate the related groups, software, data sources, and mitigations against official ATT&CK relationships and your own telemetry before making control-coverage decisions.

Associated objects

Groups, software, and campaigns

MalwareICS

S0604: Industroyer

Industroyer is a sophisticated malware framework designed to cause an impact to the working processes of Industrial Control Systems (ICS), specifically components used in electrical substations.[1] Industroyer was used in the attacks on the Ukrainian power grid in December 2016.[2] This is the first publicly known malware specifically designed to target and impact operations in the electric grid.[3]

Windows
Relationship explorer

All related ATT&CK context

mitigates · MitigationM0937: Filter Network TrafficICSmitigates · MitigationM0930: Network SegmentationICSmitigates · MitigationM0801: Access ManagementICSmitigates · MitigationM0804: Human User AuthenticationICSmitigates · MitigationM0813: Software Process and Device AuthenticationICSmitigates · MitigationM0807: Network AllowlistsICSmitigates · MitigationM0802: Communication AuthenticityICSmitigates · MitigationM0800: Authorization EnforcementICSuses · MalwareS0604: IndustroyerICStargets · ICS AssetA0002: Human-Machine Interface (HMI)ICStargets · ICS AssetA0009: Data GatewayICStargets · ICS AssetA0018: Programmable Automation Controller (PAC)ICStargets · ICS AssetA0017: Distributed Control System (DCS) ControllerICStargets · ICS AssetA0010: Safety ControllerICStargets · ICS AssetA0004: Remote Terminal Unit (RTU)ICStargets · ICS AssetA0005: Intelligent Electronic Device (IED)ICStargets · ICS AssetA0013: Field I/OICStargets · ICS AssetA0003: Programmable Logic Controller (PLC)ICSdetects · Detection StrategyDET0802: Detection of Activate Firmware Update ModeICS
Mitigations

Mitigation direction

MitigationICS

M0937: Filter Network Traffic

Use network appliances to filter ingress or egress traffic and perform protocol-based filtering. Configure software on endpoints to filter network traffic. Perform inline allow/denylisting of network messages based on the application layer (OSI Layer 7) protocol, especially for automation protocols. Application allowlists are beneficial when there are well-defined communication sequences, types, rates, or patterns needed during expected system operations. Application denylists may be needed if all acceptable communication sequences cannot be defined, but instead a set of known malicious uses can be denied (e.g., excessive communication attempts, shutdown messages, invalid commands). Devices performing these functions are often referred to as deep-packet inspection (DPI) firewalls, context-aware firewalls, or firewalls blocking specific automation/SCADA protocol aware firewalls. [1]

MitigationICS

M0930: Network Segmentation

Architect sections of the network to isolate critical systems, functions, or resources. Use physical and logical segmentation to prevent access to potentially sensitive systems and information. Use a DMZ to contain any internet-facing services that should not be exposed from the internal network. Restrict network access to only required systems and services. In addition, prevent systems from other networks or business functions (e.g., enterprise) from accessing critical process control systems. For example, in IEC 62443, systems within the same secure level should be grouped into a zone, and access to that zone is restricted by a conduit, or mechanism to restrict data flows between zones by segmenting the network. [1] [2]

MitigationICS

M0801: Access Management

Access Management technologies can be used to enforce authorization polices and decisions, especially when existing field devices do not provide sufficient capabilities to support user identification and authentication. [1] These technologies typically utilize an in-line network device or gateway system to prevent access to unauthenticated users, while also integrating with an authentication service to first verify user credentials. [2]

MitigationICS

M0804: Human User Authentication

Require user authentication before allowing access to data or accepting commands to a device. While strong multi-factor authentication is preferable, it is not always feasible within ICS environments. Performing strong user authentication also requires additional security controls and processes which are often the target of related adversarial techniques (e.g., Valid Accounts, Default Credentials). Therefore, associated ATT&CK mitigations should be considered in addition to this, including Multi-factor Authentication, Account Use Policies, Password Policies, User Account Management, Privileged Account Management, and User Account Control.

MitigationICS

M0813: Software Process and Device Authentication

Require the authentication of devices and software processes where appropriate. Devices that connect remotely to other systems should require strong authentication to prevent spoofing of communications. Furthermore, software processes should also require authentication when accessing APIs.

MitigationICS

M0807: Network Allowlists

Network allowlists can be implemented through either host-based files or system hosts files to specify what connections (e.g., IP address, MAC address, port, protocol) can be made from a device. Allowlist techniques that operate at the application layer (e.g., DNP3, Modbus, HTTP) are addressed in Filter Network Traffic mitigation.

MitigationICS

M0802: Communication Authenticity

When communicating over an untrusted network, utilize secure network protocols that both authenticate the message sender and can verify its integrity. This can be done either through message authentication codes (MACs) or digital signatures, to detect spoofed network messages and unauthorized connections.

MitigationICS

M0800: Authorization Enforcement

The device or system should restrict read, manipulate, or execute privileges to only authenticated users who require access based on approved security policies. Role-based Access Control (RBAC) schemes can help reduce the overhead of assigning permissions to the large number of devices within an ICS. For example, IEC 62351 provides examples of roles used to support common system operations within the electric power sector [1], while IEEE 1686 defines standard permissions for users of IEDs. [2]

Change history

Object version and sync metadata

The fields below describe the current mirrored snapshot. When Glexia retains multiple ATT&CK source imports, you can open the table to compare the same object across releases (hashes and MITRE timestamps). For MITRE’s own release notes and roadmap, see ATT&CK resources — Updates.

ATT&CK release
19.2
Object version
1.0
Created
Modified
Raw hash
199aa57bd097463f...
Imported snapshots across ATT&CK releases(2)
ReleaseBundle importedObject versionModifiedStatusRaw hash
19.21.0Current bundle199aa57bd097…
19.11.0Older bundle199aa57bd097…
Raw source

Mirrored ATT&CK source object

The raw object is retained through the mirrored ATT&CK source bundle and object hash. The raw endpoint returns the exact object from the mirrored bundle when available.

Open mirrored raw JSONOpen MITRE-hosted copy
Source references

External references and citations

MITRE external references are preserved separately from Glexia analysis so citations remain traceable to their original source records.

  1. [1]
    mitre-attackT0800
    Open source URL
Source and licensing

Source: MITRE ATT&CK®. © 2026 The MITRE Corporation. This work is reproduced and distributed with the permission of The MITRE Corporation. MITRE ATT&CK and ATT&CK are registered trademarks of The MITRE Corporation. Glexia is not affiliated with or endorsed by MITRE.

Official MITRE ATT&CK siteOfficial STIX data repositoryMITRE ATT&CK terms of use