Browse CVE records published in April 2025, with severity, affected products, CWE, KEV, and source-backed vulnerability context.
Showing 50 of 3966 matching CVEs · Page 13 of 80.
In the Linux kernel, the following vulnerability has been resolved: rapidio: add check for rio_add_net() in rio_scan_alloc_net() The return value of rio_add_net() should be checked. If it fails, put_device() should be called to free the memory and give up the reference initialized in rio_add_net().
Published Apr 1, 2025 · Updated May 11, 2026
In the Linux kernel, the following vulnerability has been resolved: arm: pgtable: fix NULL pointer dereference issue When update_mmu_cache_range() is called by update_mmu_cache(), the vmf parameter is NULL, which will cause a NULL pointer dereference issue in adjust_pte(): Unable to handle kernel NULL pointer dereference at virtual address 00000030 when read Hardware name: Atmel AT91SAM9 PC is at update_mmu_cache_range+0x1e0/0x278 LR is at pte_offset_map_rw_nolock+0x18/0x2c Call trace: update_mmu_cache_range from remove_migration_pte+0x29c/0x2ec remove_migration_pte from rmap_walk_file+0xcc/0x130 rmap_walk_file from remove_migration_ptes+0x90/0xa4 remove_migration_ptes from migrate_pages_batch+0x6d4/0x858 migrate_pages_batch from migrate_pages+0x188/0x488 migrate_pages from compact_zone+0x56c/0x954 compact_zone from compact_node+0x90/0xf0 compact_node from kcompactd+0x1d4/0x204 kcompactd from kthread+0x120/0x12c kthread from ret_from_fork+0x14/0x38 Exception stack(0xc0d8bfb0 to 0xc0d8bff8) To fix it, do not rely on whether 'ptl' is equal to decide whether to hold the pte lock, but decide it by whether CONFIG_SPLIT_PTE_PTLOCKS is enabled. In addition, if two vmas map to the same PTE page, there is no need to hold the pte lock again, otherwise a deadlock will occur. Just add the need_lock parameter to let adjust_pte() know this information.
Published Apr 1, 2025 · Updated May 11, 2026
In the Linux kernel, the following vulnerability has been resolved: wifi: iwlwifi: mvm: don't try to talk to a dead firmware This fixes: bad state = 0 WARNING: CPU: 10 PID: 702 at drivers/net/wireless/inel/iwlwifi/iwl-trans.c:178 iwl_trans_send_cmd+0xba/0xe0 [iwlwifi] Call Trace: <TASK> ? __warn+0xca/0x1c0 ? iwl_trans_send_cmd+0xba/0xe0 [iwlwifi 64fa9ad799a0e0d2ba53d4af93a53ad9a531f8d4] iwl_fw_dbg_clear_monitor_buf+0xd7/0x110 [iwlwifi 64fa9ad799a0e0d2ba53d4af93a53ad9a531f8d4] _iwl_dbgfs_fw_dbg_clear_write+0xe2/0x120 [iwlmvm 0e8adb18cea92d2c341766bcc10b18699290068a] Ask whether the firmware is alive before sending a command.
Published Apr 1, 2025 · Updated May 11, 2026
In the Linux kernel, the following vulnerability has been resolved: HID: intel-ish-hid: Fix use-after-free issue in hid_ishtp_cl_remove() During the `rmmod` operation for the `intel_ishtp_hid` driver, a use-after-free issue can occur in the hid_ishtp_cl_remove() function. The function hid_ishtp_cl_deinit() is called before ishtp_hid_remove(), which can lead to accessing freed memory or resources during the removal process. Call Trace: ? ishtp_cl_send+0x168/0x220 [intel_ishtp] ? hid_output_report+0xe3/0x150 [hid] hid_ishtp_set_feature+0xb5/0x120 [intel_ishtp_hid] ishtp_hid_request+0x7b/0xb0 [intel_ishtp_hid] hid_hw_request+0x1f/0x40 [hid] sensor_hub_set_feature+0x11f/0x190 [hid_sensor_hub] _hid_sensor_power_state+0x147/0x1e0 [hid_sensor_trigger] hid_sensor_runtime_resume+0x22/0x30 [hid_sensor_trigger] sensor_hub_remove+0xa8/0xe0 [hid_sensor_hub] hid_device_remove+0x49/0xb0 [hid] hid_destroy_device+0x6f/0x90 [hid] ishtp_hid_remove+0x42/0x70 [intel_ishtp_hid] hid_ishtp_cl_remove+0x6b/0xb0 [intel_ishtp_hid] ishtp_cl_device_remove+0x4a/0x60 [intel_ishtp] ... Additionally, ishtp_hid_remove() is a HID level power off, which should occur before the ISHTP level disconnect. This patch resolves the issue by reordering the calls in hid_ishtp_cl_remove(). The function ishtp_hid_remove() is now called before hid_ishtp_cl_deinit().
Published Apr 1, 2025 · Updated May 11, 2026
In the Linux kernel, the following vulnerability has been resolved: HID: intel-ish-hid: Fix use-after-free issue in ishtp_hid_remove() The system can experience a random crash a few minutes after the driver is removed. This issue occurs due to improper handling of memory freeing in the ishtp_hid_remove() function. The function currently frees the `driver_data` directly within the loop that destroys the HID devices, which can lead to accessing freed memory. Specifically, `hid_destroy_device()` uses `driver_data` when it calls `hid_ishtp_set_feature()` to power off the sensor, so freeing `driver_data` beforehand can result in accessing invalid memory. This patch resolves the issue by storing the `driver_data` in a temporary variable before calling `hid_destroy_device()`, and then freeing the `driver_data` after the device is destroyed.
Published Apr 1, 2025 · Updated May 11, 2026
In the Linux kernel, the following vulnerability has been resolved: ppp: Fix KMSAN uninit-value warning with bpf Syzbot caught an "KMSAN: uninit-value" warning [1], which is caused by the ppp driver not initializing a 2-byte header when using socket filter. The following code can generate a PPP filter BPF program: ''' struct bpf_program fp; pcap_t *handle; handle = pcap_open_dead(DLT_PPP_PPPD, 65535); pcap_compile(handle, &fp, "ip and outbound", 0, 0); bpf_dump(&fp, 1); ''' Its output is: ''' (000) ldh [2] (001) jeq #0x21 jt 2 jf 5 (002) ldb [0] (003) jeq #0x1 jt 4 jf 5 (004) ret #65535 (005) ret #0 ''' Wen can find similar code at the following link: https://github.com/ppp-project/ppp/blob/master/pppd/options.c#L1680 The maintainer of this code repository is also the original maintainer of the ppp driver. As you can see the BPF program skips 2 bytes of data and then reads the 'Protocol' field to determine if it's an IP packet. Then it read the first byte of the first 2 bytes to determine the direction. The issue is that only the first byte indicating direction is initialized in current ppp driver code while the second byte is not initialized. For normal BPF programs generated by libpcap, uninitialized data won't be used, so it's not a problem. However, for carefully crafted BPF programs, such as those generated by syzkaller [2], which start reading from offset 0, the uninitialized data will be used and caught by KMSAN. [1] https://syzkaller.appspot.com/bug?extid=853242d9c9917165d791 [2] https://syzkaller.appspot.com/text?tag=ReproC&x=11994913980000
Published Apr 1, 2025 · Updated May 11, 2026
In the Linux kernel, the following vulnerability has been resolved: net: ethtool: netlink: Allow NULL nlattrs when getting a phy_device ethnl_req_get_phydev() is used to lookup a phy_device, in the case an ethtool netlink command targets a specific phydev within a netdev's topology. It takes as a parameter a const struct nlattr *header that's used for error handling : if (!phydev) { NL_SET_ERR_MSG_ATTR(extack, header, "no phy matching phyindex"); return ERR_PTR(-ENODEV); } In the notify path after a ->set operation however, there's no request attributes available. The typical callsite for the above function looks like: phydev = ethnl_req_get_phydev(req_base, tb[ETHTOOL_A_XXX_HEADER], info->extack); So, when tb is NULL (such as in the ethnl notify path), we have a nice crash. It turns out that there's only the PLCA command that is in that case, as the other phydev-specific commands don't have a notification. This commit fixes the crash by passing the cmd index and the nlattr array separately, allowing NULL-checking it directly inside the helper.
Published Apr 1, 2025 · Updated May 11, 2026
In the Linux kernel, the following vulnerability has been resolved: vlan: enforce underlying device type Currently, VLAN devices can be created on top of non-ethernet devices. Besides the fact that it doesn't make much sense, this also causes a bug which leaks the address of a kernel function to usermode. When creating a VLAN device, we initialize GARP (garp_init_applicant) and MRP (mrp_init_applicant) for the underlying device. As part of the initialization process, we add the multicast address of each applicant to the underlying device, by calling dev_mc_add. __dev_mc_add uses dev->addr_len to determine the length of the new multicast address. This causes an out-of-bounds read if dev->addr_len is greater than 6, since the multicast addresses provided by GARP and MRP are only 6 bytes long. This behaviour can be reproduced using the following commands: ip tunnel add gretest mode ip6gre local ::1 remote ::2 dev lo ip l set up dev gretest ip link add link gretest name vlantest type vlan id 100 Then, the following command will display the address of garp_pdu_rcv: ip maddr show | grep 01:80:c2:00:00:21 Fix the bug by enforcing the type of the underlying device during VLAN device initialization.
Published Apr 1, 2025 · Updated May 11, 2026
In the Linux kernel, the following vulnerability has been resolved: usb: typec: ucsi: Fix NULL pointer access Resources should be released only after all threads that utilize them have been destroyed. This commit ensures that resources are not released prematurely by waiting for the associated workqueue to complete before deallocating them.
Published Apr 1, 2025 · Updated May 11, 2026
In the Linux kernel, the following vulnerability has been resolved: usb: renesas_usbhs: Flush the notify_hotplug_work When performing continuous unbind/bind operations on the USB drivers available on the Renesas RZ/G2L SoC, a kernel crash with the message "Unable to handle kernel NULL pointer dereference at virtual address" may occur. This issue points to the usbhsc_notify_hotplug() function. Flush the delayed work to avoid its execution when driver resources are unavailable.
Published Apr 1, 2025 · Updated May 11, 2026
In the Linux kernel, the following vulnerability has been resolved: gpio: rcar: Use raw_spinlock to protect register access Use raw_spinlock in order to fix spurious messages about invalid context when spinlock debugging is enabled. The lock is only used to serialize register access. [ 4.239592] ============================= [ 4.239595] [ BUG: Invalid wait context ] [ 4.239599] 6.13.0-rc7-arm64-renesas-05496-gd088502a519f #35 Not tainted [ 4.239603] ----------------------------- [ 4.239606] kworker/u8:5/76 is trying to lock: [ 4.239609] ffff0000091898a0 (&p->lock){....}-{3:3}, at: gpio_rcar_config_interrupt_input_mode+0x34/0x164 [ 4.239641] other info that might help us debug this: [ 4.239643] context-{5:5} [ 4.239646] 5 locks held by kworker/u8:5/76: [ 4.239651] #0: ffff0000080fb148 ((wq_completion)async){+.+.}-{0:0}, at: process_one_work+0x190/0x62c [ 4.250180] OF: /soc/sound@ec500000/ports/port@0/endpoint: Read of boolean property 'frame-master' with a value. [ 4.254094] #1: ffff80008299bd80 ((work_completion)(&entry->work)){+.+.}-{0:0}, at: process_one_work+0x1b8/0x62c [ 4.254109] #2: ffff00000920c8f8 [ 4.258345] OF: /soc/sound@ec500000/ports/port@1/endpoint: Read of boolean property 'bitclock-master' with a value. [ 4.264803] (&dev->mutex){....}-{4:4}, at: __device_attach_async_helper+0x3c/0xdc [ 4.264820] #3: ffff00000a50ca40 (request_class#2){+.+.}-{4:4}, at: __setup_irq+0xa0/0x690 [ 4.264840] #4: [ 4.268872] OF: /soc/sound@ec500000/ports/port@1/endpoint: Read of boolean property 'frame-master' with a value. [ 4.273275] ffff00000a50c8c8 (lock_class){....}-{2:2}, at: __setup_irq+0xc4/0x690 [ 4.296130] renesas_sdhi_internal_dmac ee100000.mmc: mmc1 base at 0x00000000ee100000, max clock rate 200 MHz [ 4.304082] stack backtrace: [ 4.304086] CPU: 1 UID: 0 PID: 76 Comm: kworker/u8:5 Not tainted 6.13.0-rc7-arm64-renesas-05496-gd088502a519f #35 [ 4.304092] Hardware name: Renesas Salvator-X 2nd version board based on r8a77965 (DT) [ 4.304097] Workqueue: async async_run_entry_fn [ 4.304106] Call trace: [ 4.304110] show_stack+0x14/0x20 (C) [ 4.304122] dump_stack_lvl+0x6c/0x90 [ 4.304131] dump_stack+0x14/0x1c [ 4.304138] __lock_acquire+0xdfc/0x1584 [ 4.426274] lock_acquire+0x1c4/0x33c [ 4.429942] _raw_spin_lock_irqsave+0x5c/0x80 [ 4.434307] gpio_rcar_config_interrupt_input_mode+0x34/0x164 [ 4.440061] gpio_rcar_irq_set_type+0xd4/0xd8 [ 4.444422] __irq_set_trigger+0x5c/0x178 [ 4.448435] __setup_irq+0x2e4/0x690 [ 4.452012] request_threaded_irq+0xc4/0x190 [ 4.456285] devm_request_threaded_irq+0x7c/0xf4 [ 4.459398] ata1: link resume succeeded after 1 retries [ 4.460902] mmc_gpiod_request_cd_irq+0x68/0xe0 [ 4.470660] mmc_start_host+0x50/0xac [ 4.474327] mmc_add_host+0x80/0xe4 [ 4.477817] tmio_mmc_host_probe+0x2b0/0x440 [ 4.482094] renesas_sdhi_probe+0x488/0x6f4 [ 4.486281] renesas_sdhi_internal_dmac_probe+0x60/0x78 [ 4.491509] platform_probe+0x64/0xd8 [ 4.495178] really_probe+0xb8/0x2a8 [ 4.498756] __driver_probe_device+0x74/0x118 [ 4.503116] driver_probe_device+0x3c/0x154 [ 4.507303] __device_attach_driver+0xd4/0x160 [ 4.511750] bus_for_each_drv+0x84/0xe0 [ 4.515588] __device_attach_async_helper+0xb0/0xdc [ 4.520470] async_run_entry_fn+0x30/0xd8 [ 4.524481] process_one_work+0x210/0x62c [ 4.528494] worker_thread+0x1ac/0x340 [ 4.532245] kthread+0x10c/0x110 [ 4.535476] ret_from_fork+0x10/0x20
Published Apr 1, 2025 · Updated May 11, 2026
In the Linux kernel, the following vulnerability has been resolved: drm/imagination: avoid deadlock on fence release Do scheduler queue fence release processing on a workqueue, rather than in the release function itself. Fixes deadlock issues such as the following: [ 607.400437] ============================================ [ 607.405755] WARNING: possible recursive locking detected [ 607.415500] -------------------------------------------- [ 607.420817] weston:zfq0/24149 is trying to acquire lock: [ 607.426131] ffff000017d041a0 (reservation_ww_class_mutex){+.+.}-{3:3}, at: pvr_gem_object_vunmap+0x40/0xc0 [powervr] [ 607.436728] but task is already holding lock: [ 607.442554] ffff000017d105a0 (reservation_ww_class_mutex){+.+.}-{3:3}, at: dma_buf_ioctl+0x250/0x554 [ 607.451727] other info that might help us debug this: [ 607.458245] Possible unsafe locking scenario: [ 607.464155] CPU0 [ 607.466601] ---- [ 607.469044] lock(reservation_ww_class_mutex); [ 607.473584] lock(reservation_ww_class_mutex); [ 607.478114] *** DEADLOCK ***
Published Apr 1, 2025 · Updated May 11, 2026
In the Linux kernel, the following vulnerability has been resolved: wifi: cfg80211: regulatory: improve invalid hints checking Syzbot keeps reporting an issue [1] that occurs when erroneous symbols sent from userspace get through into user_alpha2[] via regulatory_hint_user() call. Such invalid regulatory hints should be rejected. While a sanity check from commit 47caf685a685 ("cfg80211: regulatory: reject invalid hints") looks to be enough to deter these very cases, there is a way to get around it due to 2 reasons. 1) The way isalpha() works, symbols other than latin lower and upper letters may be used to determine a country/domain. For instance, greek letters will also be considered upper/lower letters and for such characters isalpha() will return true as well. However, ISO-3166-1 alpha2 codes should only hold latin characters. 2) While processing a user regulatory request, between reg_process_hint_user() and regulatory_hint_user() there happens to be a call to queue_regulatory_request() which modifies letters in request->alpha2[] with toupper(). This works fine for latin symbols, less so for weird letter characters from the second part of _ctype[]. Syzbot triggers a warning in is_user_regdom_saved() by first sending over an unexpected non-latin letter that gets malformed by toupper() into a character that ends up failing isalpha() check. Prevent this by enhancing is_an_alpha2() to ensure that incoming symbols are latin letters and nothing else. [1] Syzbot report: ------------[ cut here ]------------ Unexpected user alpha2: A� WARNING: CPU: 1 PID: 964 at net/wireless/reg.c:442 is_user_regdom_saved net/wireless/reg.c:440 [inline] WARNING: CPU: 1 PID: 964 at net/wireless/reg.c:442 restore_alpha2 net/wireless/reg.c:3424 [inline] WARNING: CPU: 1 PID: 964 at net/wireless/reg.c:442 restore_regulatory_settings+0x3c0/0x1e50 net/wireless/reg.c:3516 Modules linked in: CPU: 1 UID: 0 PID: 964 Comm: kworker/1:2 Not tainted 6.12.0-rc5-syzkaller-00044-gc1e939a21eb1 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/13/2024 Workqueue: events_power_efficient crda_timeout_work RIP: 0010:is_user_regdom_saved net/wireless/reg.c:440 [inline] RIP: 0010:restore_alpha2 net/wireless/reg.c:3424 [inline] RIP: 0010:restore_regulatory_settings+0x3c0/0x1e50 net/wireless/reg.c:3516 ... Call Trace: <TASK> crda_timeout_work+0x27/0x50 net/wireless/reg.c:542 process_one_work kernel/workqueue.c:3229 [inline] process_scheduled_works+0xa65/0x1850 kernel/workqueue.c:3310 worker_thread+0x870/0xd30 kernel/workqueue.c:3391 kthread+0x2f2/0x390 kernel/kthread.c:389 ret_from_fork+0x4d/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244 </TASK>
Published Apr 1, 2025 · Updated May 11, 2026
In the Linux kernel, the following vulnerability has been resolved: wifi: nl80211: reject cooked mode if it is set along with other flags It is possible to set both MONITOR_FLAG_COOK_FRAMES and MONITOR_FLAG_ACTIVE flags simultaneously on the same monitor interface from the userspace. This causes a sub-interface to be created with no IEEE80211_SDATA_IN_DRIVER bit set because the monitor interface is in the cooked state and it takes precedence over all other states. When the interface is then being deleted the kernel calls WARN_ONCE() from check_sdata_in_driver() because of missing that bit. Fix this by rejecting MONITOR_FLAG_COOK_FRAMES if it is set along with other flags. Found by Linux Verification Center (linuxtesting.org) with Syzkaller.
Published Apr 1, 2025 · Updated May 11, 2026
In the Linux kernel, the following vulnerability has been resolved: NFS: fix nfs_release_folio() to not deadlock via kcompactd writeback Add PF_KCOMPACTD flag and current_is_kcompactd() helper to check for it so nfs_release_folio() can skip calling nfs_wb_folio() from kcompactd. Otherwise NFS can deadlock waiting for kcompactd enduced writeback which recurses back to NFS (which triggers writeback to NFSD via NFS loopback mount on the same host, NFSD blocks waiting for XFS's call to __filemap_get_folio): 6070.550357] INFO: task kcompactd0:58 blocked for more than 4435 seconds. {--- [58] "kcompactd0" [<0>] folio_wait_bit+0xe8/0x200 [<0>] folio_wait_writeback+0x2b/0x80 [<0>] nfs_wb_folio+0x80/0x1b0 [nfs] [<0>] nfs_release_folio+0x68/0x130 [nfs] [<0>] split_huge_page_to_list_to_order+0x362/0x840 [<0>] migrate_pages_batch+0x43d/0xb90 [<0>] migrate_pages_sync+0x9a/0x240 [<0>] migrate_pages+0x93c/0x9f0 [<0>] compact_zone+0x8e2/0x1030 [<0>] compact_node+0xdb/0x120 [<0>] kcompactd+0x121/0x2e0 [<0>] kthread+0xcf/0x100 [<0>] ret_from_fork+0x31/0x40 [<0>] ret_from_fork_asm+0x1a/0x30 ---} [akpm@linux-foundation.org: fix build]
Published Apr 1, 2025 · Updated May 11, 2026
In the Linux kernel, the following vulnerability has been resolved: wifi: iwlwifi: limit printed string from FW file There's no guarantee here that the file is always with a NUL-termination, so reading the string may read beyond the end of the TLV. If that's the last TLV in the file, it can perhaps even read beyond the end of the file buffer. Fix that by limiting the print format to the size of the buffer we have.
Published Apr 1, 2025 · Updated May 11, 2026
In the Linux kernel, the following vulnerability has been resolved: caif_virtio: fix wrong pointer check in cfv_probe() del_vqs() frees virtqueues, therefore cfv->vq_tx pointer should be checked for NULL before calling it, not cfv->vdev. Also the current implementation is redundant because the pointer cfv->vdev is dereferenced before it is checked for NULL. Fix this by checking cfv->vq_tx for NULL instead of cfv->vdev before calling del_vqs().
Published Apr 1, 2025 · Updated May 11, 2026
In the Linux kernel, the following vulnerability has been resolved: mctp i3c: handle NULL header address daddr can be NULL if there is no neighbour table entry present, in that case the tx packet should be dropped. saddr will usually be set by MCTP core, but check for NULL in case a packet is transmitted by a different protocol.
Published Apr 1, 2025 · Updated May 11, 2026
In the Linux kernel, the following vulnerability has been resolved: sched_ext: Fix pick_task_scx() picking non-queued tasks when it's called without balance() a6250aa251ea ("sched_ext: Handle cases where pick_task_scx() is called without preceding balance_scx()") added a workaround to handle the cases where pick_task_scx() is called without prececing balance_scx() which is due to a fair class bug where pick_taks_fair() may return NULL after a true return from balance_fair(). The workaround detects when pick_task_scx() is called without preceding balance_scx() and emulates SCX_RQ_BAL_KEEP and triggers kicking to avoid stalling. Unfortunately, the workaround code was testing whether @prev was on SCX to decide whether to keep the task running. This is incorrect as the task may be on SCX but no longer runnable. This could lead to a non-runnable task to be returned from pick_task_scx() which cause interesting confusions and failures. e.g. A common failure mode is the task ending up with (!on_rq && on_cpu) state which can cause potential wakers to busy loop, which can easily lead to deadlocks. Fix it by testing whether @prev has SCX_TASK_QUEUED set. This makes @prev_on_scx only used in one place. Open code the usage and improve the comment while at it.
Published Apr 1, 2025 · Updated May 11, 2026
In the Linux kernel, the following vulnerability has been resolved: perf/core: Order the PMU list to fix warning about unordered pmu_ctx_list Syskaller triggers a warning due to prev_epc->pmu != next_epc->pmu in perf_event_swap_task_ctx_data(). vmcore shows that two lists have the same perf_event_pmu_context, but not in the same order. The problem is that the order of pmu_ctx_list for the parent is impacted by the time when an event/PMU is added. While the order for a child is impacted by the event order in the pinned_groups and flexible_groups. So the order of pmu_ctx_list in the parent and child may be different. To fix this problem, insert the perf_event_pmu_context to its proper place after iteration of the pmu_ctx_list. The follow testcase can trigger above warning: # perf record -e cycles --call-graph lbr -- taskset -c 3 ./a.out & # perf stat -e cpu-clock,cs -p xxx // xxx is the pid of a.out test.c void main() { int count = 0; pid_t pid; printf("%d running\n", getpid()); sleep(30); printf("running\n"); pid = fork(); if (pid == -1) { printf("fork error\n"); return; } if (pid == 0) { while (1) { count++; } } else { while (1) { count++; } } } The testcase first opens an LBR event, so it will allocate task_ctx_data, and then open tracepoint and software events, so the parent context will have 3 different perf_event_pmu_contexts. On inheritance, child ctx will insert the perf_event_pmu_context in another order and the warning will trigger. [ mingo: Tidied up the changelog. ]
Published Apr 1, 2025 · Updated May 11, 2026
In the Linux kernel, the following vulnerability has been resolved: net: enetc: VFs do not support HWTSTAMP_TX_ONESTEP_SYNC Actually ENETC VFs do not support HWTSTAMP_TX_ONESTEP_SYNC because only ENETC PF can access PMa_SINGLE_STEP registers. And there will be a crash if VFs are used to test one-step timestamp, the crash log as follows. [ 129.110909] Unable to handle kernel paging request at virtual address 00000000000080c0 [ 129.287769] Call trace: [ 129.290219] enetc_port_mac_wr+0x30/0xec (P) [ 129.294504] enetc_start_xmit+0xda4/0xe74 [ 129.298525] enetc_xmit+0x70/0xec [ 129.301848] dev_hard_start_xmit+0x98/0x118
Published Apr 1, 2025 · Updated May 11, 2026
In manikandan580 School-management-system 1.0, a reflected cross-site scripting (XSS) vulnerability exists in /studentms/admin/contact-us.php via the email POST parameter.
Published Apr 14, 2026 · Updated May 10, 2026
The login mechanism of Sage DPW 2021_06_004 displays distinct responses for valid and invalid usernames, allowing enumeration of existing accounts in versions before 2021_06_000. On-premise administrators can toggle this behavior in newer versions.
Published Apr 1, 2026 · Updated May 10, 2026
A non-default configuration in Sage DPW 2025_06_004 allows unauthenticated access to diagnostic endpoints within the Database Monitor feature, exposing sensitive information such as hashes and table names. This feature is disabled by default in all installations and never available in Sage DPW Cloud. It was forcibly disabled again in version 2025_06_003.
Published Apr 1, 2026 · Updated May 10, 2026
An issue in open5gs v.2.7.3 allows a remote attacker to cause a denial of service via a crafted PDU Session Modification Request
Published Apr 30, 2026 · Updated May 4, 2026
Assertion failure vulnerability in the PCO (Protocol Configuration Options) parser in the SMF (Session Management Function) component of Open5GS before v2.7.5 allows remote attackers to cause denial of service via specially crafted NGAP messages containing malformed length fields in protocol configuration data.
Published Apr 30, 2026 · Updated May 4, 2026
A flaw was found in GNUPlot. A segmentation fault via IO_str_init_static_internal may jeopardize the environment.
Published Apr 7, 2025 · Updated May 3, 2026
A container privilege escalation flaw was found in certain Multicluster Engine for Kubernetes images. This issue stems from the /etc/passwd file being created with group-writable permissions during build time. In certain conditions, an attacker who can execute commands within an affected container, even as a non-root user, can leverage their membership in the root group to modify the /etc/passwd file. This could allow the attacker to add a new user with any arbitrary UID, including UID 0, leading to full root privileges within the container.
Published Apr 8, 2026 · Updated May 1, 2026
IBM watsonx.data 2.2 through 2.3 IBM Lakehouse does not properly restrict communication between pods which could allow an attacker to transfer data between pods without restrictions.
Published Apr 30, 2026 · Updated May 1, 2026
IBM watsonx.data intelligence 5.2.0, 5.2.1, 5.3.0, 5.3.1 stores user credentials in plain text which can be read by a local user.
Published Apr 30, 2026 · Updated May 1, 2026
Synway SMG Gateway Management Software contains an OS command injection vulnerability in the RADIUS configuration endpoint at /en/9-2radius.php where the radius_address POST parameter is split and interpolated directly into a sed command without sanitization. An unauthenticated remote attacker can inject arbitrary shell commands by submitting a POST request with crafted radius_address, radius_address2, shared_secret2, source_ip, timeout, or retry parameters along with save=1 and enable_radius=1 to achieve remote code execution. Exploitation evidence was first observed by the Shadowserver Foundation on 2025-07-11 (UTC).
Published Apr 30, 2026 · Updated Apr 30, 2026
CryptPad 2025.3.1 allows unbounded WebSocket frame flood. A remote, unauthenticated attacker can significantly degrade or deny service for all users of a CryptPad instance. Fixed in 2026.2.2.
Published Apr 30, 2026 · Updated Apr 30, 2026
All versions of the package django-mdeditor are vulnerable to Missing Authentication for Critical Function in the image upload endpoint. An attacker can upload malicious files and achieve arbitrary code execution since this endpoint lacks authentication protection and proper sanitisation of file names.
Published Apr 30, 2026 · Updated Apr 30, 2026
A vulnerability in B1 Free Archiver v1.5.86 allows files extracted from downloaded archives to bypass Windows Mark of the Web (MotW) protections. When an archive is downloaded from the internet and extracted using B1 Free Archiver, the software fails to propagate the 'Zone.Identifier' alternate data stream to the extracted files. As a result, these files can be executed without triggering Windows Defender SmartScreen warnings or security prompts, enabling untrusted code execution without standard security restrictions.
Published Apr 29, 2026 · Updated Apr 30, 2026
The .NET Remoting framework used by OpenText Fax (RightFax) includes known security vulnerabilities that could be exploited if the service is exposed in environments where the remoting ports are accessible.
Published Apr 15, 2026 · Updated Apr 29, 2026
EfficientLab Controlio before v1.3.95 contains a DLL hijacking vulnerability caused by weak folder permissions in the installation directory. A local attacker can place a specially crafted DLL in this directory and achieve arbitrary code execution with highest privileges, because the affected service runs as NT AUTHORITY\SYSTEM.
Published Apr 23, 2026 · Updated Apr 29, 2026
Due to improper TLS certificate validation in the DeskTime Time Tracking App before version 1.3.674, attackers who can position themselves in the network path between the client and the DeskTime update servers can return a malicious executable in response to an update request. This allows the attacker to achieve user-level remote code execution on the affected client.
Published Apr 28, 2026 · Updated Apr 29, 2026
A cross-site scripting (XSS) vulnerability in opennebula v6.10.0.1 allows attackers to execute arbitrary web scripts or HTML via injecting a crafted payload into the zone attribute parameter.
Published Apr 29, 2026 · Updated Apr 29, 2026
A cross-site scripting (XSS) vulnerability in the custom authenticator driver of opennebula v6.10.0.1 allows attackers to execute arbitrary web scripts or HTML via a crafted payload.
Published Apr 29, 2026 · Updated Apr 29, 2026
A stored cross-site scripting (XSS) vulnerability in opennebula v6.10.0.1 allows attackers to execute arbitrary web scripts or HTML via injecting a crafted payload into the user information parameter.
Published Apr 29, 2026 · Updated Apr 29, 2026
A stored cross-site scripting (XSS) vulnerability in opennebula v6.10.0.1 and fixed in v.7.0 allows attackers to execute arbitrary web scripts or HTML via injecting a crafted payload into the virtual network template parameter.
Published Apr 29, 2026 · Updated Apr 29, 2026
The authentication endpoint accepts user-supplied input without enforcing expected validation constraints, leading to a lack of proper output encoding. This allows for the injection of malicious JavaScript payloads, enabling reflected cross-site scripting. An attacker can leverage this vulnerability to redirect the user's browser to a malicious website, modify the user interface of the web page, retrieve information from the browser, or cause other harmful actions. However, due to the protection of session-related cookies with the httpOnly flag, session hijacking is not possible.
Published Apr 29, 2026 · Updated Apr 29, 2026
Missing Authorization vulnerability in enituretechnology Pallet Packaging for WooCommerce pallet-packaging-for-woocommerce allows Exploiting Incorrectly Configured Access Control Security Levels.This issue affects Pallet Packaging for WooCommerce: from n/a through <= 1.1.15.
Published Apr 4, 2025 · Updated Apr 29, 2026
Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') vulnerability in codepeople Payment Form for PayPal Pro payment-form-for-paypal-pro allows Stored XSS.This issue affects Payment Form for PayPal Pro: from n/a through <= 1.1.72.
Published Apr 17, 2025 · Updated Apr 29, 2026
Authentication Bypass by Spoofing vulnerability in Ays Pro Survey Maker survey-maker allows Identity Spoofing.This issue affects Survey Maker: from n/a through <= 5.1.6.3.
Published Apr 10, 2025 · Updated Apr 29, 2026
Cross-Site Request Forgery (CSRF) vulnerability in SOFTAGON WooCommerce Products without featured images woocommerce-products-without-featured-images allows Reflected XSS.This issue affects WooCommerce Products without featured images: from n/a through <= 0.1.
Published Apr 17, 2025 · Updated Apr 29, 2026
Authentication Bypass by Spoofing vulnerability in Asgaros Asgaros Forum asgaros-forum allows Identity Spoofing.This issue affects Asgaros Forum: from n/a through <= 3.0.0.
Published Apr 10, 2025 · Updated Apr 29, 2026
Improper Control of Filename for Include/Require Statement in PHP Program ('PHP Remote File Inclusion') vulnerability in zamartz Checkout Field Visibility for WooCommerce checkout-field-visibility-for-woocommerce allows PHP Local File Inclusion.This issue affects Checkout Field Visibility for WooCommerce: from n/a through <= 1.3.0.
Published Apr 24, 2025 · Updated Apr 29, 2026
Improper Limitation of a Pathname to a Restricted Directory ('Path Traversal') vulnerability in adamskaat Countdown & Clock countdown-builder allows Remote Code Inclusion.This issue affects Countdown & Clock: from n/a through <= 2.8.8.
Published Apr 1, 2025 · Updated Apr 29, 2026
Improper Limitation of a Pathname to a Restricted Directory ('Path Traversal') vulnerability in piotnetdotcom Piotnet Forms piotnetforms.This issue affects Piotnet Forms: from n/a through <= 1.0.30.
Published Apr 10, 2025 · Updated Apr 29, 2026
