Medium · CVSS 4.7
In the Linux kernel, the following vulnerability has been resolved:
media: streamzap: fix race between device disconnection and urb callback
Syzkaller has reported a general protection fault at function
ir_raw_event_store_with_filter(). This crash is caused by a NULL pointer
dereference of dev->raw pointer, even though it is checked for NULL in
the same function, which means there is a race condition. It occurs due
to the incorrect order of actions in the streamzap_disconnect() function:
rc_unregister_device() is called before usb_kill_urb(). The dev->raw
pointer is freed and set to NULL in rc_unregister_device(), and only
after that usb_kill_urb() waits for in-progress requests to finish.
If rc_unregister_device() is called while streamzap_callback() handler is
not finished, this can lead to accessing freed resources. Thus
rc_unregister_device() should be called after usb_kill_urb().
Found by Linux Verification Center (linuxtesting.org) with Syzkaller.
Published Apr 16, 2025 · Updated May 11, 2026
Medium · CVSS 5.5
In the Linux kernel, the following vulnerability has been resolved:
nfsd: fix management of listener transports
Currently, when no active threads are running, a root user using nfsdctl
command can try to remove a particular listener from the list of previously
added ones, then start the server by increasing the number of threads,
it leads to the following problem:
[ 158.835354] refcount_t: addition on 0; use-after-free.
[ 158.835603] WARNING: CPU: 2 PID: 9145 at lib/refcount.c:25 refcount_warn_saturate+0x160/0x1a0
[ 158.836017] Modules linked in: rpcrdma rdma_cm iw_cm ib_cm ib_core nfsd auth_rpcgss nfs_acl lockd grace overlay isofs uinput snd_seq_dummy snd_hrtimer nft_fib_inet nft_fib_ipv4 nft_fib_ipv6 nft_fib nft_reject_inet nf_reject_ipv4 nf_reject_ipv6 nft_reject nft_ct nft_chain_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 rfkill ip_set nf_tables qrtr sunrpc vfat fat uvcvideo videobuf2_vmalloc videobuf2_memops uvc videobuf2_v4l2 videodev videobuf2_common snd_hda_codec_generic mc e1000e snd_hda_intel snd_intel_dspcfg snd_hda_codec snd_hda_core snd_hwdep snd_seq snd_seq_device snd_pcm snd_timer snd soundcore sg loop dm_multipath dm_mod nfnetlink vsock_loopback vmw_vsock_virtio_transport_common vmw_vsock_vmci_transport vmw_vmci vsock xfs libcrc32c crct10dif_ce ghash_ce vmwgfx sha2_ce sha256_arm64 sr_mod sha1_ce cdrom nvme drm_client_lib drm_ttm_helper ttm nvme_core drm_kms_helper nvme_auth drm fuse
[ 158.840093] CPU: 2 UID: 0 PID: 9145 Comm: nfsd Kdump: loaded Tainted: G B W 6.13.0-rc6+ #7
[ 158.840624] Tainted: [B]=BAD_PAGE, [W]=WARN
[ 158.840802] Hardware name: VMware, Inc. VMware20,1/VBSA, BIOS VMW201.00V.24006586.BA64.2406042154 06/04/2024
[ 158.841220] pstate: 61400005 (nZCv daif +PAN -UAO -TCO +DIT -SSBS BTYPE=--)
[ 158.841563] pc : refcount_warn_saturate+0x160/0x1a0
[ 158.841780] lr : refcount_warn_saturate+0x160/0x1a0
[ 158.842000] sp : ffff800089be7d80
[ 158.842147] x29: ffff800089be7d80 x28: ffff00008e68c148 x27: ffff00008e68c148
[ 158.842492] x26: ffff0002e3b5c000 x25: ffff600011cd1829 x24: ffff00008653c010
[ 158.842832] x23: ffff00008653c000 x22: 1fffe00011cd1829 x21: ffff00008653c028
[ 158.843175] x20: 0000000000000002 x19: ffff00008653c010 x18: 0000000000000000
[ 158.843505] x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000
[ 158.843836] x14: 0000000000000000 x13: 0000000000000001 x12: ffff600050a26493
[ 158.844143] x11: 1fffe00050a26492 x10: ffff600050a26492 x9 : dfff800000000000
[ 158.844475] x8 : 00009fffaf5d9b6e x7 : ffff000285132493 x6 : 0000000000000001
[ 158.844823] x5 : ffff000285132490 x4 : ffff600050a26493 x3 : ffff8000805e72bc
[ 158.845174] x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff000098588000
[ 158.845528] Call trace:
[ 158.845658] refcount_warn_saturate+0x160/0x1a0 (P)
[ 158.845894] svc_recv+0x58c/0x680 [sunrpc]
[ 158.846183] nfsd+0x1fc/0x348 [nfsd]
[ 158.846390] kthread+0x274/0x2f8
[ 158.846546] ret_from_fork+0x10/0x20
[ 158.846714] ---[ end trace 0000000000000000 ]---
nfsd_nl_listener_set_doit() would manipulate the list of transports of
server's sv_permsocks and close the specified listener but the other
list of transports (server's sp_xprts list) would not be changed leading
to the problem above.
Instead, determined if the nfsdctl is trying to remove a listener, in
which case, delete all the existing listener transports and re-create
all-but-the-removed ones.
Published Apr 16, 2025 · Updated May 11, 2026
Unknown · CVSS Not scored
In the Linux kernel, the following vulnerability has been resolved:
usb: xhci: Don't skip on Stopped - Length Invalid
Up until commit d56b0b2ab142 ("usb: xhci: ensure skipped isoc TDs are
returned when isoc ring is stopped") in v6.11, the driver didn't skip
missed isochronous TDs when handling Stoppend and Stopped - Length
Invalid events. Instead, it erroneously cleared the skip flag, which
would cause the ring to get stuck, as future events won't match the
missed TD which is never removed from the queue until it's cancelled.
This buggy logic seems to have been in place substantially unchanged
since the 3.x series over 10 years ago, which probably speaks first
and foremost about relative rarity of this case in normal usage, but
by the spec I see no reason why it shouldn't be possible.
After d56b0b2ab142, TDs are immediately skipped when handling those
Stopped events. This poses a potential problem in case of Stopped -
Length Invalid, which occurs either on completed TDs (likely already
given back) or Link and No-Op TRBs. Such event won't be recognized
as matching any TD (unless it's the rare Link TRB inside a TD) and
will result in skipping all pending TDs, giving them back possibly
before they are done, risking isoc data loss and maybe UAF by HW.
As a compromise, don't skip and don't clear the skip flag on this
kind of event. Then the next event will skip missed TDs. A downside
of not handling Stopped - Length Invalid on a Link inside a TD is
that if the TD is cancelled, its actual length will not be updated
to account for TRBs (silently) completed before the TD was stopped.
I had no luck producing this sequence of completion events so there
is no compelling demonstration of any resulting disaster. It may be
a very rare, obscure condition. The sole motivation for this patch
is that if such unlikely event does occur, I'd rather risk reporting
a cancelled partially done isoc frame as empty than gamble with UAF.
This will be fixed more properly by looking at Stopped event's TRB
pointer when making skipping decisions, but such rework is unlikely
to be backported to v6.12, which will stay around for a few years.
Published Apr 16, 2025 · Updated May 11, 2026
Medium · CVSS 5.5
In the Linux kernel, the following vulnerability has been resolved:
atm: Fix NULL pointer dereference
When MPOA_cache_impos_rcvd() receives the msg, it can trigger
Null Pointer Dereference Vulnerability if both entry and
holding_time are NULL. Because there is only for the situation
where entry is NULL and holding_time exists, it can be passed
when both entry and holding_time are NULL. If these are NULL,
the entry will be passd to eg_cache_put() as parameter and
it is referenced by entry->use code in it.
kasan log:
[ 3.316691] Oops: general protection fault, probably for non-canonical address 0xdffffc0000000006:I
[ 3.317568] KASAN: null-ptr-deref in range [0x0000000000000030-0x0000000000000037]
[ 3.318188] CPU: 3 UID: 0 PID: 79 Comm: ex Not tainted 6.14.0-rc2 #102
[ 3.318601] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014
[ 3.319298] RIP: 0010:eg_cache_remove_entry+0xa5/0x470
[ 3.319677] Code: c1 f7 6e fd 48 c7 c7 00 7e 38 b2 e8 95 64 54 fd 48 c7 c7 40 7e 38 b2 48 89 ee e80
[ 3.321220] RSP: 0018:ffff88800583f8a8 EFLAGS: 00010006
[ 3.321596] RAX: 0000000000000006 RBX: ffff888005989000 RCX: ffffffffaecc2d8e
[ 3.322112] RDX: 0000000000000000 RSI: 0000000000000004 RDI: 0000000000000030
[ 3.322643] RBP: 0000000000000000 R08: 0000000000000000 R09: fffffbfff6558b88
[ 3.323181] R10: 0000000000000003 R11: 203a207972746e65 R12: 1ffff11000b07f15
[ 3.323707] R13: dffffc0000000000 R14: ffff888005989000 R15: ffff888005989068
[ 3.324185] FS: 000000001b6313c0(0000) GS:ffff88806d380000(0000) knlGS:0000000000000000
[ 3.325042] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 3.325545] CR2: 00000000004b4b40 CR3: 000000000248e000 CR4: 00000000000006f0
[ 3.326430] Call Trace:
[ 3.326725] <TASK>
[ 3.326927] ? die_addr+0x3c/0xa0
[ 3.327330] ? exc_general_protection+0x161/0x2a0
[ 3.327662] ? asm_exc_general_protection+0x26/0x30
[ 3.328214] ? vprintk_emit+0x15e/0x420
[ 3.328543] ? eg_cache_remove_entry+0xa5/0x470
[ 3.328910] ? eg_cache_remove_entry+0x9a/0x470
[ 3.329294] ? __pfx_eg_cache_remove_entry+0x10/0x10
[ 3.329664] ? console_unlock+0x107/0x1d0
[ 3.329946] ? __pfx_console_unlock+0x10/0x10
[ 3.330283] ? do_syscall_64+0xa6/0x1a0
[ 3.330584] ? entry_SYSCALL_64_after_hwframe+0x47/0x7f
[ 3.331090] ? __pfx_prb_read_valid+0x10/0x10
[ 3.331395] ? down_trylock+0x52/0x80
[ 3.331703] ? vprintk_emit+0x15e/0x420
[ 3.331986] ? __pfx_vprintk_emit+0x10/0x10
[ 3.332279] ? down_trylock+0x52/0x80
[ 3.332527] ? _printk+0xbf/0x100
[ 3.332762] ? __pfx__printk+0x10/0x10
[ 3.333007] ? _raw_write_lock_irq+0x81/0xe0
[ 3.333284] ? __pfx__raw_write_lock_irq+0x10/0x10
[ 3.333614] msg_from_mpoad+0x1185/0x2750
[ 3.333893] ? __build_skb_around+0x27b/0x3a0
[ 3.334183] ? __pfx_msg_from_mpoad+0x10/0x10
[ 3.334501] ? __alloc_skb+0x1c0/0x310
[ 3.334809] ? __pfx___alloc_skb+0x10/0x10
[ 3.335283] ? _raw_spin_lock+0xe0/0xe0
[ 3.335632] ? finish_wait+0x8d/0x1e0
[ 3.335975] vcc_sendmsg+0x684/0xba0
[ 3.336250] ? __pfx_vcc_sendmsg+0x10/0x10
[ 3.336587] ? __pfx_autoremove_wake_function+0x10/0x10
[ 3.337056] ? fdget+0x176/0x3e0
[ 3.337348] __sys_sendto+0x4a2/0x510
[ 3.337663] ? __pfx___sys_sendto+0x10/0x10
[ 3.337969] ? ioctl_has_perm.constprop.0.isra.0+0x284/0x400
[ 3.338364] ? sock_ioctl+0x1bb/0x5a0
[ 3.338653] ? __rseq_handle_notify_resume+0x825/0xd20
[ 3.339017] ? __pfx_sock_ioctl+0x10/0x10
[ 3.339316] ? __pfx___rseq_handle_notify_resume+0x10/0x10
[ 3.339727] ? selinux_file_ioctl+0xa4/0x260
[ 3.340166] __x64_sys_sendto+0xe0/0x1c0
[ 3.340526] ? syscall_exit_to_user_mode+0x123/0x140
[ 3.340898] do_syscall_64+0xa6/0x1a0
[ 3.341170] entry_SYSCALL_64_after_hwframe+0x77/0x7f
[ 3.341533] RIP: 0033:0x44a380
[ 3.341757] Code: 0f 1f 84 00 00 00 00 00 66 90 f3 0f 1e fa 41 89 ca 64 8b 04 25 18 00 00 00 85 c00
[
---truncated---
Published Apr 16, 2025 · Updated May 11, 2026
Unknown · CVSS Not scored
In the Linux kernel, the following vulnerability has been resolved:
devlink: fix xa_alloc_cyclic() error handling
In case of returning 1 from xa_alloc_cyclic() (wrapping) ERR_PTR(1) will
be returned, which will cause IS_ERR() to be false. Which can lead to
dereference not allocated pointer (rel).
Fix it by checking if err is lower than zero.
This wasn't found in real usecase, only noticed. Credit to Pierre.
Published Apr 8, 2025 · Updated May 11, 2026
Unknown · CVSS Not scored
In the Linux kernel, the following vulnerability has been resolved:
dpll: fix xa_alloc_cyclic() error handling
In case of returning 1 from xa_alloc_cyclic() (wrapping) ERR_PTR(1) will
be returned, which will cause IS_ERR() to be false. Which can lead to
dereference not allocated pointer (pin).
Fix it by checking if err is lower than zero.
This wasn't found in real usecase, only noticed. Credit to Pierre.
Published Apr 8, 2025 · Updated May 11, 2026
Unknown · CVSS Not scored
In the Linux kernel, the following vulnerability has been resolved:
soc: qcom: pdr: Fix the potential deadlock
When some client process A call pdr_add_lookup() to add the look up for
the service and does schedule locator work, later a process B got a new
server packet indicating locator is up and call pdr_locator_new_server()
which eventually sets pdr->locator_init_complete to true which process A
sees and takes list lock and queries domain list but it will timeout due
to deadlock as the response will queued to the same qmi->wq and it is
ordered workqueue and process B is not able to complete new server
request work due to deadlock on list lock.
Fix it by removing the unnecessary list iteration as the list iteration
is already being done inside locator work, so avoid it here and just
call schedule_work() here.
Process A Process B
process_scheduled_works()
pdr_add_lookup() qmi_data_ready_work()
process_scheduled_works() pdr_locator_new_server()
pdr->locator_init_complete=true;
pdr_locator_work()
mutex_lock(&pdr->list_lock);
pdr_locate_service() mutex_lock(&pdr->list_lock);
pdr_get_domain_list()
pr_err("PDR: %s get domain list
txn wait failed: %d\n",
req->service_name,
ret);
Timeout error log due to deadlock:
"
PDR: tms/servreg get domain list txn wait failed: -110
PDR: service lookup for msm/adsp/sensor_pd:tms/servreg failed: -110
"
Thanks to Bjorn and Johan for letting me know that this commit also fixes
an audio regression when using the in-kernel pd-mapper as that makes it
easier to hit this race. [1]
Published Apr 8, 2025 · Updated May 11, 2026
Medium · CVSS 5.5
In the Linux kernel, the following vulnerability has been resolved:
ARM: dts: bcm2711: Fix xHCI power-domain
During s2idle tests on the Raspberry CM4 the VPU firmware always crashes
on xHCI power-domain resume:
root@raspberrypi:/sys/power# echo freeze > state
[ 70.724347] xhci_suspend finished
[ 70.727730] xhci_plat_suspend finished
[ 70.755624] bcm2835-power bcm2835-power: Power grafx off
[ 70.761127] USB: Set power to 0
[ 74.653040] USB: Failed to set power to 1 (-110)
This seems to be caused because of the mixed usage of
raspberrypi-power and bcm2835-power at the same time. So avoid
the usage of the VPU firmware power-domain driver, which
prevents the VPU crash.
Published Apr 8, 2025 · Updated May 11, 2026
Unknown · CVSS Not scored
In the Linux kernel, the following vulnerability has been resolved:
RDMA/hns: Fix soft lockup during bt pages loop
Driver runs a for-loop when allocating bt pages and mapping them with
buffer pages. When a large buffer (e.g. MR over 100GB) is being allocated,
it may require a considerable loop count. This will lead to soft lockup:
watchdog: BUG: soft lockup - CPU#27 stuck for 22s!
...
Call trace:
hem_list_alloc_mid_bt+0x124/0x394 [hns_roce_hw_v2]
hns_roce_hem_list_request+0xf8/0x160 [hns_roce_hw_v2]
hns_roce_mtr_create+0x2e4/0x360 [hns_roce_hw_v2]
alloc_mr_pbl+0xd4/0x17c [hns_roce_hw_v2]
hns_roce_reg_user_mr+0xf8/0x190 [hns_roce_hw_v2]
ib_uverbs_reg_mr+0x118/0x290
watchdog: BUG: soft lockup - CPU#35 stuck for 23s!
...
Call trace:
hns_roce_hem_list_find_mtt+0x7c/0xb0 [hns_roce_hw_v2]
mtr_map_bufs+0xc4/0x204 [hns_roce_hw_v2]
hns_roce_mtr_create+0x31c/0x3c4 [hns_roce_hw_v2]
alloc_mr_pbl+0xb0/0x160 [hns_roce_hw_v2]
hns_roce_reg_user_mr+0x108/0x1c0 [hns_roce_hw_v2]
ib_uverbs_reg_mr+0x120/0x2bc
Add a cond_resched() to fix soft lockup during these loops. In order not
to affect the allocation performance of normal-size buffer, set the loop
count of a 100GB MR as the threshold to call cond_resched().
Published Apr 8, 2025 · Updated May 11, 2026
Medium · CVSS 5.5
In the Linux kernel, the following vulnerability has been resolved:
regulator: dummy: force synchronous probing
Sometimes I get a NULL pointer dereference at boot time in kobject_get()
with the following call stack:
anatop_regulator_probe()
devm_regulator_register()
regulator_register()
regulator_resolve_supply()
kobject_get()
By placing some extra BUG_ON() statements I could verify that this is
raised because probing of the 'dummy' regulator driver is not completed
('dummy_regulator_rdev' is still NULL).
In the JTAG debugger I can see that dummy_regulator_probe() and
anatop_regulator_probe() can be run by different kernel threads
(kworker/u4:*). I haven't further investigated whether this can be
changed or if there are other possibilities to force synchronization
between these two probe routines. On the other hand I don't expect much
boot time penalty by probing the 'dummy' regulator synchronously.
Published Apr 8, 2025 · Updated May 11, 2026
Unknown · CVSS Not scored
In the Linux kernel, the following vulnerability has been resolved:
regulator: check that dummy regulator has been probed before using it
Due to asynchronous driver probing there is a chance that the dummy
regulator hasn't already been probed when first accessing it.
Published Apr 8, 2025 · Updated May 11, 2026
Medium · CVSS 5.5
In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: Fix error code in chan_alloc_skb_cb()
The chan_alloc_skb_cb() function is supposed to return error pointers on
error. Returning NULL will lead to a NULL dereference.
Published Apr 3, 2025 · Updated May 11, 2026
Medium · CVSS 5.5
In the Linux kernel, the following vulnerability has been resolved:
net: ethernet: ti: am65-cpsw: Fix NAPI registration sequence
Registering the interrupts for TX or RX DMA Channels prior to registering
their respective NAPI callbacks can result in a NULL pointer dereference.
This is seen in practice as a random occurrence since it depends on the
randomness associated with the generation of traffic by Linux and the
reception of traffic from the wire.
Published Apr 3, 2025 · Updated May 11, 2026
Medium · CVSS 5.5
In the Linux kernel, the following vulnerability has been resolved:
can: ucan: fix out of bound read in strscpy() source
Commit 7fdaf8966aae ("can: ucan: use strscpy() to instead of strncpy()")
unintentionally introduced a one byte out of bound read on strscpy()'s
source argument (which is kind of ironic knowing that strscpy() is meant
to be a more secure alternative :)).
Let's consider below buffers:
dest[len + 1]; /* will be NUL terminated */
src[len]; /* may not be NUL terminated */
When doing:
strncpy(dest, src, len);
dest[len] = '\0';
strncpy() will read up to len bytes from src.
On the other hand:
strscpy(dest, src, len + 1);
will read up to len + 1 bytes from src, that is to say, an out of bound
read of one byte will occur on src if it is not NUL terminated. Note
that the src[len] byte is never copied, but strscpy() still needs to
read it to check whether a truncation occurred or not.
This exact pattern happened in ucan.
The root cause is that the source is not NUL terminated. Instead of
doing a copy in a local buffer, directly NUL terminate it as soon as
usb_control_msg() returns. With this, the local firmware_str[] variable
can be removed.
On top of this do a couple refactors:
- ucan_ctl_payload->raw is only used for the firmware string, so
rename it to ucan_ctl_payload->fw_str and change its type from u8 to
char.
- ucan_device_request_in() is only used to retrieve the firmware
string, so rename it to ucan_get_fw_str() and refactor it to make it
directly handle all the string termination logic.
Published Apr 3, 2025 · Updated May 11, 2026
Medium · CVSS 5.5
In the Linux kernel, the following vulnerability has been resolved:
netfs: Call `invalidate_cache` only if implemented
Many filesystems such as NFS and Ceph do not implement the
`invalidate_cache` method. On those filesystems, if writing to the
cache (`NETFS_WRITE_TO_CACHE`) fails for some reason, the kernel
crashes like this:
BUG: kernel NULL pointer dereference, address: 0000000000000000
#PF: supervisor instruction fetch in kernel mode
#PF: error_code(0x0010) - not-present page
PGD 0 P4D 0
Oops: Oops: 0010 [#1] SMP PTI
CPU: 9 UID: 0 PID: 3380 Comm: kworker/u193:11 Not tainted 6.13.3-cm4all1-hp #437
Hardware name: HP ProLiant DL380 Gen9/ProLiant DL380 Gen9, BIOS P89 10/17/2018
Workqueue: events_unbound netfs_write_collection_worker
RIP: 0010:0x0
Code: Unable to access opcode bytes at 0xffffffffffffffd6.
RSP: 0018:ffff9b86e2ca7dc0 EFLAGS: 00010202
RAX: 0000000000000000 RBX: 0000000000000000 RCX: 7fffffffffffffff
RDX: 0000000000000001 RSI: ffff89259d576a18 RDI: ffff89259d576900
RBP: ffff89259d5769b0 R08: ffff9b86e2ca7d28 R09: 0000000000000002
R10: ffff89258ceaca80 R11: 0000000000000001 R12: 0000000000000020
R13: ffff893d158b9338 R14: ffff89259d576900 R15: ffff89259d5769b0
FS: 0000000000000000(0000) GS:ffff893c9fa40000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: ffffffffffffffd6 CR3: 000000054442e003 CR4: 00000000001706f0
Call Trace:
<TASK>
? __die+0x1f/0x60
? page_fault_oops+0x15c/0x460
? try_to_wake_up+0x2d2/0x530
? exc_page_fault+0x5e/0x100
? asm_exc_page_fault+0x22/0x30
netfs_write_collection_worker+0xe9f/0x12b0
? xs_poll_check_readable+0x3f/0x80
? xs_stream_data_receive_workfn+0x8d/0x110
process_one_work+0x134/0x2d0
worker_thread+0x299/0x3a0
? __pfx_worker_thread+0x10/0x10
kthread+0xba/0xe0
? __pfx_kthread+0x10/0x10
ret_from_fork+0x30/0x50
? __pfx_kthread+0x10/0x10
ret_from_fork_asm+0x1a/0x30
</TASK>
Modules linked in:
CR2: 0000000000000000
This patch adds the missing `NULL` check.
Published Apr 3, 2025 · Updated May 11, 2026
Medium · CVSS 5.5
In the Linux kernel, the following vulnerability has been resolved:
mm/huge_memory: drop beyond-EOF folios with the right number of refs
When an after-split folio is large and needs to be dropped due to EOF,
folio_put_refs(folio, folio_nr_pages(folio)) should be used to drop all
page cache refs. Otherwise, the folio will not be freed, causing memory
leak.
This leak would happen on a filesystem with blocksize > page_size and a
truncate is performed, where the blocksize makes folios split to >0 order
ones, causing truncated folios not being freed.
Published Apr 3, 2025 · Updated May 11, 2026
Medium · CVSS 4.7
In the Linux kernel, the following vulnerability has been resolved:
firmware: qcom: uefisecapp: fix efivars registration race
Since the conversion to using the TZ allocator, the efivars service is
registered before the memory pool has been allocated, something which
can lead to a NULL-pointer dereference in case of a racing EFI variable
access.
Make sure that all resources have been set up before registering the
efivars.
Published Apr 3, 2025 · Updated May 11, 2026
Medium · CVSS 5.5
In the Linux kernel, the following vulnerability has been resolved:
xsk: fix an integer overflow in xp_create_and_assign_umem()
Since the i and pool->chunk_size variables are of type 'u32',
their product can wrap around and then be cast to 'u64'.
This can lead to two different XDP buffers pointing to the same
memory area.
Found by InfoTeCS on behalf of Linux Verification Center
(linuxtesting.org) with SVACE.
Published Apr 3, 2025 · Updated May 11, 2026
Medium · CVSS 5.5
In the Linux kernel, the following vulnerability has been resolved:
drm/radeon: fix uninitialized size issue in radeon_vce_cs_parse()
On the off chance that command stream passed from userspace via
ioctl() call to radeon_vce_cs_parse() is weirdly crafted and
first command to execute is to encode (case 0x03000001), the function
in question will attempt to call radeon_vce_cs_reloc() with size
argument that has not been properly initialized. Specifically, 'size'
will point to 'tmp' variable before the latter had a chance to be
assigned any value.
Play it safe and init 'tmp' with 0, thus ensuring that
radeon_vce_cs_reloc() will catch an early error in cases like these.
Found by Linux Verification Center (linuxtesting.org) with static
analysis tool SVACE.
(cherry picked from commit 2d52de55f9ee7aaee0e09ac443f77855989c6b68)
Published Apr 3, 2025 · Updated May 11, 2026
Medium · CVSS 5.5
In the Linux kernel, the following vulnerability has been resolved:
drm/sched: Fix fence reference count leak
The last_scheduled fence leaks when an entity is being killed and adding
the cleanup callback fails.
Decrement the reference count of prev when dma_fence_add_callback()
fails, ensuring proper balance.
[phasta: add git tag info for stable kernel]
Published Apr 3, 2025 · Updated May 11, 2026
High · CVSS 7.1
In the Linux kernel, the following vulnerability has been resolved:
iscsi_ibft: Fix UBSAN shift-out-of-bounds warning in ibft_attr_show_nic()
When performing an iSCSI boot using IPv6, iscsistart still reads the
/sys/firmware/ibft/ethernetX/subnet-mask entry. Since the IPv6 prefix
length is 64, this causes the shift exponent to become negative,
triggering a UBSAN warning. As the concept of a subnet mask does not
apply to IPv6, the value is set to ~0 to suppress the warning message.
Published Apr 2, 2025 · Updated May 11, 2026
Unknown · CVSS Not scored
In the Linux kernel, the following vulnerability has been resolved:
HID: ignore non-functional sensor in HP 5MP Camera
The HP 5MP Camera (USB ID 0408:5473) reports a HID sensor interface that
is not actually implemented. Attempting to access this non-functional
sensor via iio_info causes system hangs as runtime PM tries to wake up
an unresponsive sensor.
[453] hid-sensor-hub 0003:0408:5473.0003: Report latency attributes: ffffffff:ffffffff
[453] hid-sensor-hub 0003:0408:5473.0003: common attributes: 5:1, 2:1, 3:1 ffffffff:ffffffff
Add this device to the HID ignore list since the sensor interface is
non-functional by design and should not be exposed to userspace.
Published Apr 2, 2025 · Updated May 11, 2026
Medium · CVSS 5.5
In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: NULL-check BO's backing store when determining GFX12 PTE flags
PRT BOs may not have any backing store, so bo->tbo.resource will be
NULL. Check for that before dereferencing.
(cherry picked from commit 3e3fcd29b505cebed659311337ea03b7698767fc)
Published Apr 2, 2025 · Updated May 11, 2026
Medium · CVSS 5.5
In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: fix missing .is_two_pixels_per_container
Starting from 6.11, AMDGPU driver, while being loaded with amdgpu.dc=1,
due to lack of .is_two_pixels_per_container function in dce60_tg_funcs,
causes a NULL pointer dereference on PCs with old GPUs, such as R9 280X.
So this fix adds missing .is_two_pixels_per_container to dce60_tg_funcs.
(cherry picked from commit bd4b125eb949785c6f8a53b0494e32795421209d)
Published Apr 2, 2025 · Updated May 11, 2026
Unknown · CVSS Not scored
In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: init return value in amdgpu_ttm_clear_buffer
Otherwise an uninitialized value can be returned if
amdgpu_res_cleared returns true for all regions.
Possibly closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3812
(cherry picked from commit 7c62aacc3b452f73a1284198c81551035fac6d71)
Published Apr 2, 2025 · Updated May 11, 2026
Unknown · CVSS Not scored
In the Linux kernel, the following vulnerability has been resolved:
mm/slab/kvfree_rcu: Switch to WQ_MEM_RECLAIM wq
Currently kvfree_rcu() APIs use a system workqueue which is
"system_unbound_wq" to driver RCU machinery to reclaim a memory.
Recently, it has been noted that the following kernel warning can
be observed:
<snip>
workqueue: WQ_MEM_RECLAIM nvme-wq:nvme_scan_work is flushing !WQ_MEM_RECLAIM events_unbound:kfree_rcu_work
WARNING: CPU: 21 PID: 330 at kernel/workqueue.c:3719 check_flush_dependency+0x112/0x120
Modules linked in: intel_uncore_frequency(E) intel_uncore_frequency_common(E) skx_edac(E) ...
CPU: 21 UID: 0 PID: 330 Comm: kworker/u144:6 Tainted: G E 6.13.2-0_g925d379822da #1
Hardware name: Wiwynn Twin Lakes MP/Twin Lakes Passive MP, BIOS YMM20 02/01/2023
Workqueue: nvme-wq nvme_scan_work
RIP: 0010:check_flush_dependency+0x112/0x120
Code: 05 9a 40 14 02 01 48 81 c6 c0 00 00 00 48 8b 50 18 48 81 c7 c0 00 00 00 48 89 f9 48 ...
RSP: 0018:ffffc90000df7bd8 EFLAGS: 00010082
RAX: 000000000000006a RBX: ffffffff81622390 RCX: 0000000000000027
RDX: 00000000fffeffff RSI: 000000000057ffa8 RDI: ffff88907f960c88
RBP: 0000000000000000 R08: ffffffff83068e50 R09: 000000000002fffd
R10: 0000000000000004 R11: 0000000000000000 R12: ffff8881001a4400
R13: 0000000000000000 R14: ffff88907f420fb8 R15: 0000000000000000
FS: 0000000000000000(0000) GS:ffff88907f940000(0000) knlGS:0000000000000000
CR2: 00007f60c3001000 CR3: 000000107d010005 CR4: 00000000007726f0
PKRU: 55555554
Call Trace:
<TASK>
? __warn+0xa4/0x140
? check_flush_dependency+0x112/0x120
? report_bug+0xe1/0x140
? check_flush_dependency+0x112/0x120
? handle_bug+0x5e/0x90
? exc_invalid_op+0x16/0x40
? asm_exc_invalid_op+0x16/0x20
? timer_recalc_next_expiry+0x190/0x190
? check_flush_dependency+0x112/0x120
? check_flush_dependency+0x112/0x120
__flush_work.llvm.1643880146586177030+0x174/0x2c0
flush_rcu_work+0x28/0x30
kvfree_rcu_barrier+0x12f/0x160
kmem_cache_destroy+0x18/0x120
bioset_exit+0x10c/0x150
disk_release.llvm.6740012984264378178+0x61/0xd0
device_release+0x4f/0x90
kobject_put+0x95/0x180
nvme_put_ns+0x23/0xc0
nvme_remove_invalid_namespaces+0xb3/0xd0
nvme_scan_work+0x342/0x490
process_scheduled_works+0x1a2/0x370
worker_thread+0x2ff/0x390
? pwq_release_workfn+0x1e0/0x1e0
kthread+0xb1/0xe0
? __kthread_parkme+0x70/0x70
ret_from_fork+0x30/0x40
? __kthread_parkme+0x70/0x70
ret_from_fork_asm+0x11/0x20
</TASK>
---[ end trace 0000000000000000 ]---
<snip>
To address this switch to use of independent WQ_MEM_RECLAIM
workqueue, so the rules are not violated from workqueue framework
point of view.
Apart of that, since kvfree_rcu() does reclaim memory it is worth
to go with WQ_MEM_RECLAIM type of wq because it is designed for
this purpose.
Published Apr 1, 2025 · Updated May 11, 2026
Medium · CVSS 5.5
In the Linux kernel, the following vulnerability has been resolved:
pinctrl: nuvoton: npcm8xx: Add NULL check in npcm8xx_gpio_fw
devm_kasprintf() calls can return null pointers on failure.
But the return values were not checked in npcm8xx_gpio_fw().
Add NULL check in npcm8xx_gpio_fw(), to handle kernel NULL
pointer dereference error.
Published Apr 1, 2025 · Updated May 11, 2026
Medium · CVSS 5.5
In the Linux kernel, the following vulnerability has been resolved:
ice: fix memory leak in aRFS after reset
Fix aRFS (accelerated Receive Flow Steering) structures memory leak by
adding a checker to verify if aRFS memory is already allocated while
configuring VSI. aRFS objects are allocated in two cases:
- as part of VSI initialization (at probe), and
- as part of reset handling
However, VSI reconfiguration executed during reset involves memory
allocation one more time, without prior releasing already allocated
resources. This led to the memory leak with the following signature:
[root@os-delivery ~]# cat /sys/kernel/debug/kmemleak
unreferenced object 0xff3c1ca7252e6000 (size 8192):
comm "kworker/0:0", pid 8, jiffies 4296833052
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace (crc 0):
[<ffffffff991ec485>] __kmalloc_cache_noprof+0x275/0x340
[<ffffffffc0a6e06a>] ice_init_arfs+0x3a/0xe0 [ice]
[<ffffffffc09f1027>] ice_vsi_cfg_def+0x607/0x850 [ice]
[<ffffffffc09f244b>] ice_vsi_setup+0x5b/0x130 [ice]
[<ffffffffc09c2131>] ice_init+0x1c1/0x460 [ice]
[<ffffffffc09c64af>] ice_probe+0x2af/0x520 [ice]
[<ffffffff994fbcd3>] local_pci_probe+0x43/0xa0
[<ffffffff98f07103>] work_for_cpu_fn+0x13/0x20
[<ffffffff98f0b6d9>] process_one_work+0x179/0x390
[<ffffffff98f0c1e9>] worker_thread+0x239/0x340
[<ffffffff98f14abc>] kthread+0xcc/0x100
[<ffffffff98e45a6d>] ret_from_fork+0x2d/0x50
[<ffffffff98e083ba>] ret_from_fork_asm+0x1a/0x30
...
Published Apr 1, 2025 · Updated May 11, 2026
Medium · CVSS 5.5
In the Linux kernel, the following vulnerability has been resolved:
sched: address a potential NULL pointer dereference in the GRED scheduler.
If kzalloc in gred_init returns a NULL pointer, the code follows the
error handling path, invoking gred_destroy. This, in turn, calls
gred_offload, where memset could receive a NULL pointer as input,
potentially leading to a kernel crash.
When table->opt is NULL in gred_init(), gred_change_table_def()
is not called yet, so it is not necessary to call ->ndo_setup_tc()
in gred_offload().
Published Apr 1, 2025 · Updated May 11, 2026
Unknown · CVSS Not scored
In the Linux kernel, the following vulnerability has been resolved:
drm/hyperv: Fix address space leak when Hyper-V DRM device is removed
When a Hyper-V DRM device is probed, the driver allocates MMIO space for
the vram, and maps it cacheable. If the device removed, or in the error
path for device probing, the MMIO space is released but no unmap is done.
Consequently the kernel address space for the mapping is leaked.
Fix this by adding iounmap() calls in the device removal path, and in the
error path during device probing.
Published Apr 1, 2025 · Updated May 11, 2026
Unknown · CVSS Not scored
In the Linux kernel, the following vulnerability has been resolved:
fbdev: hyperv_fb: Fix hang in kdump kernel when on Hyper-V Gen 2 VMs
Gen 2 Hyper-V VMs boot via EFI and have a standard EFI framebuffer
device. When the kdump kernel runs in such a VM, loading the efifb
driver may hang because of accessing the framebuffer at the wrong
memory address.
The scenario occurs when the hyperv_fb driver in the original kernel
moves the framebuffer to a different MMIO address because of conflicts
with an already-running efifb or simplefb driver. The hyperv_fb driver
then informs Hyper-V of the change, which is allowed by the Hyper-V FB
VMBus device protocol. However, when the kexec command loads the kdump
kernel into crash memory via the kexec_file_load() system call, the
system call doesn't know the framebuffer has moved, and it sets up the
kdump screen_info using the original framebuffer address. The transition
to the kdump kernel does not go through the Hyper-V host, so Hyper-V
does not reset the framebuffer address like it would do on a reboot.
When efifb tries to run, it accesses a non-existent framebuffer
address, which traps to the Hyper-V host. After many such accesses,
the Hyper-V host thinks the guest is being malicious, and throttles
the guest to the point that it runs very slowly or appears to have hung.
When the kdump kernel is loaded into crash memory via the kexec_load()
system call, the problem does not occur. In this case, the kexec command
builds the screen_info table itself in user space from data returned
by the FBIOGET_FSCREENINFO ioctl against /dev/fb0, which gives it the
new framebuffer location.
This problem was originally reported in 2020 [1], resulting in commit
3cb73bc3fa2a ("hyperv_fb: Update screen_info after removing old
framebuffer"). This commit solved the problem by setting orig_video_isVGA
to 0, so the kdump kernel was unaware of the EFI framebuffer. The efifb
driver did not try to load, and no hang occurred. But in 2024, commit
c25a19afb81c ("fbdev/hyperv_fb: Do not clear global screen_info")
effectively reverted 3cb73bc3fa2a. Commit c25a19afb81c has no reference
to 3cb73bc3fa2a, so perhaps it was done without knowing the implications
that were reported with 3cb73bc3fa2a. In any case, as of commit
c25a19afb81c, the original problem came back again.
Interestingly, the hyperv_drm driver does not have this problem because
it never moves the framebuffer. The difference is that the hyperv_drm
driver removes any conflicting framebuffers *before* allocating an MMIO
address, while the hyperv_fb drivers removes conflicting framebuffers
*after* allocating an MMIO address. With the "after" ordering, hyperv_fb
may encounter a conflict and move the framebuffer to a different MMIO
address. But the conflict is essentially bogus because it is removed
a few lines of code later.
Rather than fix the problem with the approach from 2020 in commit
3cb73bc3fa2a, instead slightly reorder the steps in hyperv_fb so
conflicting framebuffers are removed before allocating an MMIO address.
Then the default framebuffer MMIO address should always be available, and
there's never any confusion about which framebuffer address the kdump
kernel should use -- it's always the original address provided by
the Hyper-V host. This approach is already used by the hyperv_drm
driver, and is consistent with the usage guidelines at the head of
the module with the function aperture_remove_conflicting_devices().
This approach also solves a related minor problem when kexec_load()
is used to load the kdump kernel. With current code, unbinding and
rebinding the hyperv_fb driver could result in the framebuffer moving
back to the default framebuffer address, because on the rebind there
are no conflicts. If such a move is done after the kdump kernel is
loaded with the new framebuffer address, at kdump time it could again
have the wrong address.
This problem and fix are described in terms of the kdump kernel, but
it can also occur
---truncated---
Published Apr 1, 2025 · Updated May 11, 2026
Unknown · CVSS Not scored
In the Linux kernel, the following vulnerability has been resolved:
net/mlx5: handle errors in mlx5_chains_create_table()
In mlx5_chains_create_table(), the return value of mlx5_get_fdb_sub_ns()
and mlx5_get_flow_namespace() must be checked to prevent NULL pointer
dereferences. If either function fails, the function should log error
message with mlx5_core_warn() and return error pointer.
Published Apr 1, 2025 · Updated May 11, 2026
Unknown · CVSS Not scored
In the Linux kernel, the following vulnerability has been resolved:
eth: bnxt: return fail if interface is down in bnxt_queue_mem_alloc()
The bnxt_queue_mem_alloc() is called to allocate new queue memory when
a queue is restarted.
It internally accesses rx buffer descriptor corresponding to the index.
The rx buffer descriptor is allocated and set when the interface is up
and it's freed when the interface is down.
So, if queue is restarted if interface is down, kernel panic occurs.
Splat looks like:
BUG: unable to handle page fault for address: 000000000000b240
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 0 P4D 0
Oops: Oops: 0000 [#1] PREEMPT SMP NOPTI
CPU: 3 UID: 0 PID: 1563 Comm: ncdevmem2 Not tainted 6.14.0-rc2+ #9 844ddba6e7c459cafd0bf4db9a3198e
Hardware name: ASUS System Product Name/PRIME Z690-P D4, BIOS 0603 11/01/2021
RIP: 0010:bnxt_queue_mem_alloc+0x3f/0x4e0 [bnxt_en]
Code: 41 54 4d 89 c4 4d 69 c0 c0 05 00 00 55 48 89 f5 53 48 89 fb 4c 8d b5 40 05 00 00 48 83 ec 15
RSP: 0018:ffff9dcc83fef9e8 EFLAGS: 00010202
RAX: ffffffffc0457720 RBX: ffff934ed8d40000 RCX: 0000000000000000
RDX: 000000000000001f RSI: ffff934ea508f800 RDI: ffff934ea508f808
RBP: ffff934ea508f800 R08: 000000000000b240 R09: ffff934e84f4b000
R10: ffff9dcc83fefa30 R11: ffff934e84f4b000 R12: 000000000000001f
R13: ffff934ed8d40ac0 R14: ffff934ea508fd40 R15: ffff934e84f4b000
FS: 00007fa73888c740(0000) GS:ffff93559f780000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000000000000b240 CR3: 0000000145a2e000 CR4: 00000000007506f0
PKRU: 55555554
Call Trace:
<TASK>
? __die+0x20/0x70
? page_fault_oops+0x15a/0x460
? exc_page_fault+0x6e/0x180
? asm_exc_page_fault+0x22/0x30
? __pfx_bnxt_queue_mem_alloc+0x10/0x10 [bnxt_en 7f85e76f4d724ba07471d7e39d9e773aea6597b7]
? bnxt_queue_mem_alloc+0x3f/0x4e0 [bnxt_en 7f85e76f4d724ba07471d7e39d9e773aea6597b7]
netdev_rx_queue_restart+0xc5/0x240
net_devmem_bind_dmabuf_to_queue+0xf8/0x200
netdev_nl_bind_rx_doit+0x3a7/0x450
genl_family_rcv_msg_doit+0xd9/0x130
genl_rcv_msg+0x184/0x2b0
? __pfx_netdev_nl_bind_rx_doit+0x10/0x10
? __pfx_genl_rcv_msg+0x10/0x10
netlink_rcv_skb+0x54/0x100
genl_rcv+0x24/0x40
...
Published Apr 1, 2025 · Updated May 11, 2026
Unknown · CVSS Not scored
In the Linux kernel, the following vulnerability has been resolved:
eth: bnxt: fix kernel panic in the bnxt_get_queue_stats{rx | tx}
When qstats-get operation is executed, callbacks of netdev_stats_ops
are called. The bnxt_get_queue_stats{rx | tx} collect per-queue stats
from sw_stats in the rings.
But {rx | tx | cp}_ring are allocated when the interface is up.
So, these rings are not allocated when the interface is down.
The qstats-get is allowed even if the interface is down. However,
the bnxt_get_queue_stats{rx | tx}() accesses cp_ring and tx_ring
without null check.
So, it needs to avoid accessing rings if the interface is down.
Reproducer:
ip link set $interface down
./cli.py --spec netdev.yaml --dump qstats-get
OR
ip link set $interface down
python ./stats.py
Splat looks like:
BUG: kernel NULL pointer dereference, address: 0000000000000000
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 1680fa067 P4D 1680fa067 PUD 16be3b067 PMD 0
Oops: Oops: 0000 [#1] PREEMPT SMP NOPTI
CPU: 0 UID: 0 PID: 1495 Comm: python3 Not tainted 6.14.0-rc4+ #32 5cd0f999d5a15c574ac72b3e4b907341
Hardware name: ASUS System Product Name/PRIME Z690-P D4, BIOS 0603 11/01/2021
RIP: 0010:bnxt_get_queue_stats_rx+0xf/0x70 [bnxt_en]
Code: c6 87 b5 18 00 00 02 eb a2 66 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 0f 1f 44 01
RSP: 0018:ffffabef43cdb7e0 EFLAGS: 00010282
RAX: 0000000000000000 RBX: ffffffffc04c8710 RCX: 0000000000000000
RDX: ffffabef43cdb858 RSI: 0000000000000000 RDI: ffff8d504e850000
RBP: ffff8d506c9f9c00 R08: 0000000000000004 R09: ffff8d506bcd901c
R10: 0000000000000015 R11: ffff8d506bcd9000 R12: 0000000000000000
R13: ffffabef43cdb8c0 R14: ffff8d504e850000 R15: 0000000000000000
FS: 00007f2c5462b080(0000) GS:ffff8d575f600000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000000 CR3: 0000000167fd0000 CR4: 00000000007506f0
PKRU: 55555554
Call Trace:
<TASK>
? __die+0x20/0x70
? page_fault_oops+0x15a/0x460
? sched_balance_find_src_group+0x58d/0xd10
? exc_page_fault+0x6e/0x180
? asm_exc_page_fault+0x22/0x30
? bnxt_get_queue_stats_rx+0xf/0x70 [bnxt_en cdd546fd48563c280cfd30e9647efa420db07bf1]
netdev_nl_stats_by_netdev+0x2b1/0x4e0
? xas_load+0x9/0xb0
? xas_find+0x183/0x1d0
? xa_find+0x8b/0xe0
netdev_nl_qstats_get_dumpit+0xbf/0x1e0
genl_dumpit+0x31/0x90
netlink_dump+0x1a8/0x360
Published Apr 1, 2025 · Updated May 11, 2026
High · CVSS 7.8
In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Fix slab-use-after-free on hdcp_work
[Why]
A slab-use-after-free is reported when HDCP is destroyed but the
property_validate_dwork queue is still running.
[How]
Cancel the delayed work when destroying workqueue.
(cherry picked from commit 725a04ba5a95e89c89633d4322430cfbca7ce128)
Published Apr 1, 2025 · Updated May 11, 2026
Medium · CVSS 5.5
In the Linux kernel, the following vulnerability has been resolved:
cifs: Fix integer overflow while processing acregmax mount option
User-provided mount parameter acregmax of type u32 is intended to have
an upper limit, but before it is validated, the value is converted from
seconds to jiffies which can lead to an integer overflow.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Published Apr 1, 2025 · Updated May 11, 2026
Medium · CVSS 5.5
In the Linux kernel, the following vulnerability has been resolved:
cifs: Fix integer overflow while processing acdirmax mount option
User-provided mount parameter acdirmax of type u32 is intended to have
an upper limit, but before it is validated, the value is converted from
seconds to jiffies which can lead to an integer overflow.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Published Apr 1, 2025 · Updated May 11, 2026
Medium · CVSS 5.5
In the Linux kernel, the following vulnerability has been resolved:
scsi: qla1280: Fix kernel oops when debug level > 2
A null dereference or oops exception will eventually occur when qla1280.c
driver is compiled with DEBUG_QLA1280 enabled and ql_debug_level > 2. I
think its clear from the code that the intention here is sg_dma_len(s) not
length of sg_next(s) when printing the debug info.
Published Apr 1, 2025 · Updated May 11, 2026
Unknown · CVSS Not scored
In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Assign normalized_pix_clk when color depth = 14
[WHY & HOW]
A warning message "WARNING: CPU: 4 PID: 459 at ... /dc_resource.c:3397
calculate_phy_pix_clks+0xef/0x100 [amdgpu]" occurs because the
display_color_depth == COLOR_DEPTH_141414 is not handled. This is
observed in Radeon RX 6600 XT.
It is fixed by assigning pix_clk * (14 * 3) / 24 - same as the rests.
Also fixes the indentation in get_norm_pix_clk.
(cherry picked from commit 274a87eb389f58eddcbc5659ab0b180b37e92775)
Published Apr 1, 2025 · Updated May 11, 2026
Medium · CVSS 5.5
In the Linux kernel, the following vulnerability has been resolved:
net: mana: cleanup mana struct after debugfs_remove()
When on a MANA VM hibernation is triggered, as part of hibernate_snapshot(),
mana_gd_suspend() and mana_gd_resume() are called. If during this
mana_gd_resume(), a failure occurs with HWC creation, mana_port_debugfs
pointer does not get reinitialized and ends up pointing to older,
cleaned-up dentry.
Further in the hibernation path, as part of power_down(), mana_gd_shutdown()
is triggered. This call, unaware of the failures in resume, tries to cleanup
the already cleaned up mana_port_debugfs value and hits the following bug:
[ 191.359296] mana 7870:00:00.0: Shutdown was called
[ 191.359918] BUG: kernel NULL pointer dereference, address: 0000000000000098
[ 191.360584] #PF: supervisor write access in kernel mode
[ 191.361125] #PF: error_code(0x0002) - not-present page
[ 191.361727] PGD 1080ea067 P4D 0
[ 191.362172] Oops: Oops: 0002 [#1] SMP NOPTI
[ 191.362606] CPU: 11 UID: 0 PID: 1674 Comm: bash Not tainted 6.14.0-rc5+ #2
[ 191.363292] Hardware name: Microsoft Corporation Virtual Machine/Virtual Machine, BIOS Hyper-V UEFI Release v4.1 11/21/2024
[ 191.364124] RIP: 0010:down_write+0x19/0x50
[ 191.364537] Code: 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 0f 1f 44 00 00 55 48 89 e5 53 48 89 fb e8 de cd ff ff 31 c0 ba 01 00 00 00 <f0> 48 0f b1 13 75 16 65 48 8b 05 88 24 4c 6a 48 89 43 08 48 8b 5d
[ 191.365867] RSP: 0000:ff45fbe0c1c037b8 EFLAGS: 00010246
[ 191.366350] RAX: 0000000000000000 RBX: 0000000000000098 RCX: ffffff8100000000
[ 191.366951] RDX: 0000000000000001 RSI: 0000000000000064 RDI: 0000000000000098
[ 191.367600] RBP: ff45fbe0c1c037c0 R08: 0000000000000000 R09: 0000000000000001
[ 191.368225] R10: ff45fbe0d2b01000 R11: 0000000000000008 R12: 0000000000000000
[ 191.368874] R13: 000000000000000b R14: ff43dc27509d67c0 R15: 0000000000000020
[ 191.369549] FS: 00007dbc5001e740(0000) GS:ff43dc663f380000(0000) knlGS:0000000000000000
[ 191.370213] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 191.370830] CR2: 0000000000000098 CR3: 0000000168e8e002 CR4: 0000000000b73ef0
[ 191.371557] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 191.372192] DR3: 0000000000000000 DR6: 00000000fffe07f0 DR7: 0000000000000400
[ 191.372906] Call Trace:
[ 191.373262] <TASK>
[ 191.373621] ? show_regs+0x64/0x70
[ 191.374040] ? __die+0x24/0x70
[ 191.374468] ? page_fault_oops+0x290/0x5b0
[ 191.374875] ? do_user_addr_fault+0x448/0x800
[ 191.375357] ? exc_page_fault+0x7a/0x160
[ 191.375971] ? asm_exc_page_fault+0x27/0x30
[ 191.376416] ? down_write+0x19/0x50
[ 191.376832] ? down_write+0x12/0x50
[ 191.377232] simple_recursive_removal+0x4a/0x2a0
[ 191.377679] ? __pfx_remove_one+0x10/0x10
[ 191.378088] debugfs_remove+0x44/0x70
[ 191.378530] mana_detach+0x17c/0x4f0
[ 191.378950] ? __flush_work+0x1e2/0x3b0
[ 191.379362] ? __cond_resched+0x1a/0x50
[ 191.379787] mana_remove+0xf2/0x1a0
[ 191.380193] mana_gd_shutdown+0x3b/0x70
[ 191.380642] pci_device_shutdown+0x3a/0x80
[ 191.381063] device_shutdown+0x13e/0x230
[ 191.381480] kernel_power_off+0x35/0x80
[ 191.381890] hibernate+0x3c6/0x470
[ 191.382312] state_store+0xcb/0xd0
[ 191.382734] kobj_attr_store+0x12/0x30
[ 191.383211] sysfs_kf_write+0x3e/0x50
[ 191.383640] kernfs_fop_write_iter+0x140/0x1d0
[ 191.384106] vfs_write+0x271/0x440
[ 191.384521] ksys_write+0x72/0xf0
[ 191.384924] __x64_sys_write+0x19/0x20
[ 191.385313] x64_sys_call+0x2b0/0x20b0
[ 191.385736] do_syscall_64+0x79/0x150
[ 191.386146] ? __mod_memcg_lruvec_state+0xe7/0x240
[ 191.386676] ? __lruvec_stat_mod_folio+0x79/0xb0
[ 191.387124] ? __pfx_lru_add+0x10/0x10
[ 191.387515] ? queued_spin_unlock+0x9/0x10
[ 191.387937] ? do_anonymous_page+0x33c/0xa00
[ 191.388374] ? __handle_mm_fault+0xcf3/0x1210
[ 191.388805] ? __count_memcg_events+0xbe/0x180
[ 191.389235] ? handle_mm_fault+0xae/0x300
[ 19
---truncated---
Published Apr 1, 2025 · Updated May 11, 2026
Unknown · CVSS Not scored
In the Linux kernel, the following vulnerability has been resolved:
HID: corsair-void: Update power supply values with a unified work handler
corsair_void_process_receiver can be called from an interrupt context,
locking battery_mutex in it was causing a kernel panic.
Fix it by moving the critical section into its own work, sharing this
work with battery_add_work and battery_remove_work to remove the need
for any locking
Published Apr 1, 2025 · Updated May 11, 2026
Medium · CVSS 5.5
In the Linux kernel, the following vulnerability has been resolved:
bus: mhi: host: pci_generic: Use pci_try_reset_function() to avoid deadlock
There are multiple places from where the recovery work gets scheduled
asynchronously. Also, there are multiple places where the caller waits
synchronously for the recovery to be completed. One such place is during
the PM shutdown() callback.
If the device is not alive during recovery_work, it will try to reset the
device using pci_reset_function(). This function internally will take the
device_lock() first before resetting the device. By this time, if the lock
has already been acquired, then recovery_work will get stalled while
waiting for the lock. And if the lock was already acquired by the caller
which waits for the recovery_work to be completed, it will lead to
deadlock.
This is what happened on the X1E80100 CRD device when the device died
before shutdown() callback. Driver core calls the driver's shutdown()
callback while holding the device_lock() leading to deadlock.
And this deadlock scenario can occur on other paths as well, like during
the PM suspend() callback, where the driver core would hold the
device_lock() before calling driver's suspend() callback. And if the
recovery_work was already started, it could lead to deadlock. This is also
observed on the X1E80100 CRD.
So to fix both issues, use pci_try_reset_function() in recovery_work. This
function first checks for the availability of the device_lock() before
trying to reset the device. If the lock is available, it will acquire it
and reset the device. Otherwise, it will return -EAGAIN. If that happens,
recovery_work will fail with the error message "Recovery failed" as not
much could be done.
Published Apr 1, 2025 · Updated May 11, 2026
Unknown · CVSS Not scored
In the Linux kernel, the following vulnerability has been resolved:
drivers: virt: acrn: hsm: Use kzalloc to avoid info leak in pmcmd_ioctl
In the "pmcmd_ioctl" function, three memory objects allocated by
kmalloc are initialized by "hcall_get_cpu_state", which are then
copied to user space. The initializer is indeed implemented in
"acrn_hypercall2" (arch/x86/include/asm/acrn.h). There is a risk of
information leakage due to uninitialized bytes.
Published Apr 1, 2025 · Updated May 11, 2026
Medium · CVSS 5.5
In the Linux kernel, the following vulnerability has been resolved:
HID: appleir: Fix potential NULL dereference at raw event handle
Syzkaller reports a NULL pointer dereference issue in input_event().
BUG: KASAN: null-ptr-deref in instrument_atomic_read include/linux/instrumented.h:68 [inline]
BUG: KASAN: null-ptr-deref in _test_bit include/asm-generic/bitops/instrumented-non-atomic.h:141 [inline]
BUG: KASAN: null-ptr-deref in is_event_supported drivers/input/input.c:67 [inline]
BUG: KASAN: null-ptr-deref in input_event+0x42/0xa0 drivers/input/input.c:395
Read of size 8 at addr 0000000000000028 by task syz-executor199/2949
CPU: 0 UID: 0 PID: 2949 Comm: syz-executor199 Not tainted 6.13.0-rc4-syzkaller-00076-gf097a36ef88d #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/13/2024
Call Trace:
<IRQ>
__dump_stack lib/dump_stack.c:94 [inline]
dump_stack_lvl+0x116/0x1f0 lib/dump_stack.c:120
kasan_report+0xd9/0x110 mm/kasan/report.c:602
check_region_inline mm/kasan/generic.c:183 [inline]
kasan_check_range+0xef/0x1a0 mm/kasan/generic.c:189
instrument_atomic_read include/linux/instrumented.h:68 [inline]
_test_bit include/asm-generic/bitops/instrumented-non-atomic.h:141 [inline]
is_event_supported drivers/input/input.c:67 [inline]
input_event+0x42/0xa0 drivers/input/input.c:395
input_report_key include/linux/input.h:439 [inline]
key_down drivers/hid/hid-appleir.c:159 [inline]
appleir_raw_event+0x3e5/0x5e0 drivers/hid/hid-appleir.c:232
__hid_input_report.constprop.0+0x312/0x440 drivers/hid/hid-core.c:2111
hid_ctrl+0x49f/0x550 drivers/hid/usbhid/hid-core.c:484
__usb_hcd_giveback_urb+0x389/0x6e0 drivers/usb/core/hcd.c:1650
usb_hcd_giveback_urb+0x396/0x450 drivers/usb/core/hcd.c:1734
dummy_timer+0x17f7/0x3960 drivers/usb/gadget/udc/dummy_hcd.c:1993
__run_hrtimer kernel/time/hrtimer.c:1739 [inline]
__hrtimer_run_queues+0x20a/0xae0 kernel/time/hrtimer.c:1803
hrtimer_run_softirq+0x17d/0x350 kernel/time/hrtimer.c:1820
handle_softirqs+0x206/0x8d0 kernel/softirq.c:561
__do_softirq kernel/softirq.c:595 [inline]
invoke_softirq kernel/softirq.c:435 [inline]
__irq_exit_rcu+0xfa/0x160 kernel/softirq.c:662
irq_exit_rcu+0x9/0x30 kernel/softirq.c:678
instr_sysvec_apic_timer_interrupt arch/x86/kernel/apic/apic.c:1049 [inline]
sysvec_apic_timer_interrupt+0x90/0xb0 arch/x86/kernel/apic/apic.c:1049
</IRQ>
<TASK>
asm_sysvec_apic_timer_interrupt+0x1a/0x20 arch/x86/include/asm/idtentry.h:702
__mod_timer+0x8f6/0xdc0 kernel/time/timer.c:1185
add_timer+0x62/0x90 kernel/time/timer.c:1295
schedule_timeout+0x11f/0x280 kernel/time/sleep_timeout.c:98
usbhid_wait_io+0x1c7/0x380 drivers/hid/usbhid/hid-core.c:645
usbhid_init_reports+0x19f/0x390 drivers/hid/usbhid/hid-core.c:784
hiddev_ioctl+0x1133/0x15b0 drivers/hid/usbhid/hiddev.c:794
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:906 [inline]
__se_sys_ioctl fs/ioctl.c:892 [inline]
__x64_sys_ioctl+0x190/0x200 fs/ioctl.c:892
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xcd/0x250 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
</TASK>
This happens due to the malformed report items sent by the emulated device
which results in a report, that has no fields, being added to the report list.
Due to this appleir_input_configured() is never called, hidinput_connect()
fails which results in the HID_CLAIMED_INPUT flag is not being set. However,
it does not make appleir_probe() fail and lets the event callback to be
called without the associated input device.
Thus, add a check for the HID_CLAIMED_INPUT flag and leave the event hook
early if the driver didn't claim any input_dev for some reason. Moreover,
some other hid drivers accessing input_dev in their event callbacks do have
similar checks, too.
Found by Linux Verification Center (linuxtesting.org) with Syzkaller.
Published Apr 1, 2025 · Updated May 11, 2026
Unknown · CVSS Not scored
In the Linux kernel, the following vulnerability has been resolved:
ksmbd: fix bug on trap in smb2_lock
If lock count is greater than 1, flags could be old value.
It should be checked with flags of smb_lock, not flags.
It will cause bug-on trap from locks_free_lock in error handling
routine.
Published Apr 1, 2025 · Updated May 11, 2026
Medium · CVSS 4.7
In the Linux kernel, the following vulnerability has been resolved:
gpio: aggregator: protect driver attr handlers against module unload
Both new_device_store and delete_device_store touch module global
resources (e.g. gpio_aggregator_lock). To prevent race conditions with
module unload, a reference needs to be held.
Add try_module_get() in these handlers.
For new_device_store, this eliminates what appears to be the most dangerous
scenario: if an id is allocated from gpio_aggregator_idr but
platform_device_register has not yet been called or completed, a concurrent
module unload could fail to unregister/delete the device, leaving behind a
dangling platform device/GPIO forwarder. This can result in various issues.
The following simple reproducer demonstrates these problems:
#!/bin/bash
while :; do
# note: whether 'gpiochip0 0' exists or not does not matter.
echo 'gpiochip0 0' > /sys/bus/platform/drivers/gpio-aggregator/new_device
done &
while :; do
modprobe gpio-aggregator
modprobe -r gpio-aggregator
done &
wait
Starting with the following warning, several kinds of warnings will appear
and the system may become unstable:
------------[ cut here ]------------
list_del corruption, ffff888103e2e980->next is LIST_POISON1 (dead000000000100)
WARNING: CPU: 1 PID: 1327 at lib/list_debug.c:56 __list_del_entry_valid_or_report+0xa3/0x120
[...]
RIP: 0010:__list_del_entry_valid_or_report+0xa3/0x120
[...]
Call Trace:
<TASK>
? __list_del_entry_valid_or_report+0xa3/0x120
? __warn.cold+0x93/0xf2
? __list_del_entry_valid_or_report+0xa3/0x120
? report_bug+0xe6/0x170
? __irq_work_queue_local+0x39/0xe0
? handle_bug+0x58/0x90
? exc_invalid_op+0x13/0x60
? asm_exc_invalid_op+0x16/0x20
? __list_del_entry_valid_or_report+0xa3/0x120
gpiod_remove_lookup_table+0x22/0x60
new_device_store+0x315/0x350 [gpio_aggregator]
kernfs_fop_write_iter+0x137/0x1f0
vfs_write+0x262/0x430
ksys_write+0x60/0xd0
do_syscall_64+0x6c/0x180
entry_SYSCALL_64_after_hwframe+0x76/0x7e
[...]
</TASK>
---[ end trace 0000000000000000 ]---
Published Apr 1, 2025 · Updated May 11, 2026
Unknown · CVSS Not scored
In the Linux kernel, the following vulnerability has been resolved:
btrfs: zoned: fix extent range end unlock in cow_file_range()
Running generic/751 on the for-next branch often results in a hang like
below. They are both stack by locking an extent. This suggests someone
forget to unlock an extent.
INFO: task kworker/u128:1:12 blocked for more than 323 seconds.
Not tainted 6.13.0-BTRFS-ZNS+ #503
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
task:kworker/u128:1 state:D stack:0 pid:12 tgid:12 ppid:2 flags:0x00004000
Workqueue: btrfs-fixup btrfs_work_helper [btrfs]
Call Trace:
<TASK>
__schedule+0x534/0xdd0
schedule+0x39/0x140
__lock_extent+0x31b/0x380 [btrfs]
? __pfx_autoremove_wake_function+0x10/0x10
btrfs_writepage_fixup_worker+0xf1/0x3a0 [btrfs]
btrfs_work_helper+0xff/0x480 [btrfs]
? lock_release+0x178/0x2c0
process_one_work+0x1ee/0x570
? srso_return_thunk+0x5/0x5f
worker_thread+0x1d1/0x3b0
? __pfx_worker_thread+0x10/0x10
kthread+0x10b/0x230
? __pfx_kthread+0x10/0x10
ret_from_fork+0x30/0x50
? __pfx_kthread+0x10/0x10
ret_from_fork_asm+0x1a/0x30
</TASK>
INFO: task kworker/u134:0:184 blocked for more than 323 seconds.
Not tainted 6.13.0-BTRFS-ZNS+ #503
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
task:kworker/u134:0 state:D stack:0 pid:184 tgid:184 ppid:2 flags:0x00004000
Workqueue: writeback wb_workfn (flush-btrfs-4)
Call Trace:
<TASK>
__schedule+0x534/0xdd0
schedule+0x39/0x140
__lock_extent+0x31b/0x380 [btrfs]
? __pfx_autoremove_wake_function+0x10/0x10
find_lock_delalloc_range+0xdb/0x260 [btrfs]
writepage_delalloc+0x12f/0x500 [btrfs]
? srso_return_thunk+0x5/0x5f
extent_write_cache_pages+0x232/0x840 [btrfs]
btrfs_writepages+0x72/0x130 [btrfs]
do_writepages+0xe7/0x260
? srso_return_thunk+0x5/0x5f
? lock_acquire+0xd2/0x300
? srso_return_thunk+0x5/0x5f
? find_held_lock+0x2b/0x80
? wbc_attach_and_unlock_inode.part.0+0x102/0x250
? wbc_attach_and_unlock_inode.part.0+0x102/0x250
__writeback_single_inode+0x5c/0x4b0
writeback_sb_inodes+0x22d/0x550
__writeback_inodes_wb+0x4c/0xe0
wb_writeback+0x2f6/0x3f0
wb_workfn+0x32a/0x510
process_one_work+0x1ee/0x570
? srso_return_thunk+0x5/0x5f
worker_thread+0x1d1/0x3b0
? __pfx_worker_thread+0x10/0x10
kthread+0x10b/0x230
? __pfx_kthread+0x10/0x10
ret_from_fork+0x30/0x50
? __pfx_kthread+0x10/0x10
ret_from_fork_asm+0x1a/0x30
</TASK>
This happens because we have another success path for the zoned mode. When
there is no active zone available, btrfs_reserve_extent() returns
-EAGAIN. In this case, we have two reactions.
(1) If the given range is never allocated, we can only wait for someone
to finish a zone, so wait on BTRFS_FS_NEED_ZONE_FINISH bit and retry
afterward.
(2) Or, if some allocations are already done, we must bail out and let
the caller to send IOs for the allocation. This is because these IOs
may be necessary to finish a zone.
The commit 06f364284794 ("btrfs: do proper folio cleanup when
cow_file_range() failed") moved the unlock code from the inside of the
loop to the outside. So, previously, the allocated extents are unlocked
just after the allocation and so before returning from the function.
However, they are no longer unlocked on the case (2) above. That caused
the hang issue.
Fix the issue by modifying the 'end' to the end of the allocated
range. Then, we can exit the loop and the same unlock code can properly
handle the case.
Published Apr 1, 2025 · Updated May 11, 2026
Medium · CVSS 5.5
In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Fix null check for pipe_ctx->plane_state in resource_build_scaling_params
Null pointer dereference issue could occur when pipe_ctx->plane_state
is null. The fix adds a check to ensure 'pipe_ctx->plane_state' is not
null before accessing. This prevents a null pointer dereference.
Found by code review.
(cherry picked from commit 63e6a77ccf239337baa9b1e7787cde9fa0462092)
Published Apr 1, 2025 · Updated May 11, 2026
Medium · CVSS 5.5
In the Linux kernel, the following vulnerability has been resolved:
drm/amdkfd: Fix NULL Pointer Dereference in KFD queue
Through KFD IOCTL Fuzzing we encountered a NULL pointer derefrence
when calling kfd_queue_acquire_buffers.
(cherry picked from commit 049e5bf3c8406f87c3d8e1958e0a16804fa1d530)
Published Apr 1, 2025 · Updated May 11, 2026
Medium · CVSS 5.5
In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: Add check for mgmt_alloc_skb() in mgmt_device_connected()
Add check for the return value of mgmt_alloc_skb() in
mgmt_device_connected() to prevent null pointer dereference.
Published Apr 1, 2025 · Updated May 11, 2026
