LiveActive security incident?Get immediate response
CVE archive

2024 CVE Archive

Browse CVE records published in 2024 CVE Archive, with severity, affected products, CWE, KEV, and source-backed vulnerability context.

Showing 50 of 38444 matching CVEs · Page 22 of 769.

High · CVSS 7.8

CVE-2024-42296: f2fs: fix return value of f2fs_convert_inline_inode()

In the Linux kernel, the following vulnerability has been resolved: f2fs: fix return value of f2fs_convert_inline_inode() If device is readonly, make f2fs_convert_inline_inode() return EROFS instead of zero, otherwise it may trigger panic during writeback of inline inode's dirty page as below: f2fs_write_single_data_page+0xbb6/0x1e90 fs/f2fs/data.c:2888 f2fs_write_cache_pages fs/f2fs/data.c:3187 [inline] __f2fs_write_data_pages fs/f2fs/data.c:3342 [inline] f2fs_write_data_pages+0x1efe/0x3a90 fs/f2fs/data.c:3369 do_writepages+0x359/0x870 mm/page-writeback.c:2634 filemap_fdatawrite_wbc+0x125/0x180 mm/filemap.c:397 __filemap_fdatawrite_range mm/filemap.c:430 [inline] file_write_and_wait_range+0x1aa/0x290 mm/filemap.c:788 f2fs_do_sync_file+0x68a/0x1ae0 fs/f2fs/file.c:276 generic_write_sync include/linux/fs.h:2806 [inline] f2fs_file_write_iter+0x7bd/0x24e0 fs/f2fs/file.c:4977 call_write_iter include/linux/fs.h:2114 [inline] new_sync_write fs/read_write.c:497 [inline] vfs_write+0xa72/0xc90 fs/read_write.c:590 ksys_write+0x1a0/0x2c0 fs/read_write.c:643 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf5/0x240 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f

Published Aug 17, 2024 · Updated Aug 5, 2026

High · CVSS 7.8

CVE-2024-42293: arm64: mm: Fix lockless walks with static and dynamic page-table folding

In the Linux kernel, the following vulnerability has been resolved: arm64: mm: Fix lockless walks with static and dynamic page-table folding Lina reports random oopsen originating from the fast GUP code when 16K pages are used with 4-level page-tables, the fourth level being folded at runtime due to lack of LPA2. In this configuration, the generic implementation of p4d_offset_lockless() will return a 'p4d_t *' corresponding to the 'pgd_t' allocated on the stack of the caller, gup_fast_pgd_range(). This is normally fine, but when the fourth level of page-table is folded at runtime, pud_offset_lockless() will offset from the address of the 'p4d_t' to calculate the address of the PUD in the same page-table page. This results in a stray stack read when the 'p4d_t' has been allocated on the stack and can send the walker into the weeds. Fix the problem by providing our own definition of p4d_offset_lockless() when CONFIG_PGTABLE_LEVELS <= 4 which returns the real page-table pointer rather than the address of the local stack variable.

Published Aug 17, 2024 · Updated Aug 5, 2026

High · CVSS 8.8

CVE-2024-42287: scsi: qla2xxx: Complete command early within lock

In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Complete command early within lock A crash was observed while performing NPIV and FW reset, BUG: kernel NULL pointer dereference, address: 000000000000001c #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 1 PREEMPT_RT SMP NOPTI RIP: 0010:dma_direct_unmap_sg+0x51/0x1e0 RSP: 0018:ffffc90026f47b88 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 0000000000000021 RCX: 0000000000000002 RDX: 0000000000000021 RSI: 0000000000000000 RDI: ffff8881041130d0 RBP: ffff8881041130d0 R08: 0000000000000000 R09: 0000000000000034 R10: ffffc90026f47c48 R11: 0000000000000031 R12: 0000000000000000 R13: 0000000000000000 R14: ffff8881565e4a20 R15: 0000000000000000 FS: 00007f4c69ed3d00(0000) GS:ffff889faac80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000000000000001c CR3: 0000000288a50002 CR4: 00000000007706e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: <TASK> ? __die_body+0x1a/0x60 ? page_fault_oops+0x16f/0x4a0 ? do_user_addr_fault+0x174/0x7f0 ? exc_page_fault+0x69/0x1a0 ? asm_exc_page_fault+0x22/0x30 ? dma_direct_unmap_sg+0x51/0x1e0 ? preempt_count_sub+0x96/0xe0 qla2xxx_qpair_sp_free_dma+0x29f/0x3b0 [qla2xxx] qla2xxx_qpair_sp_compl+0x60/0x80 [qla2xxx] __qla2x00_abort_all_cmds+0xa2/0x450 [qla2xxx] The command completion was done early while aborting the commands in driver unload path but outside lock to avoid the WARN_ON condition of performing dma_free_attr within the lock. However this caused race condition while command completion via multiple paths causing system crash. Hence complete the command early in unload path but within the lock to avoid race condition.

Published Aug 17, 2024 · Updated Aug 5, 2026

High · CVSS 7.5

CVE-2024-42286: scsi: qla2xxx: validate nvme_local_port correctly

In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: validate nvme_local_port correctly The driver load failed with error message, qla2xxx [0000:04:00.0]-ffff:0: register_localport failed: ret=ffffffef and with a kernel crash, BUG: unable to handle kernel NULL pointer dereference at 0000000000000070 Workqueue: events_unbound qla_register_fcport_fn [qla2xxx] RIP: 0010:nvme_fc_register_remoteport+0x16/0x430 [nvme_fc] RSP: 0018:ffffaaa040eb3d98 EFLAGS: 00010282 RAX: 0000000000000000 RBX: ffff9dfb46b78c00 RCX: 0000000000000000 RDX: ffff9dfb46b78da8 RSI: ffffaaa040eb3e08 RDI: 0000000000000000 RBP: ffff9dfb612a0a58 R08: ffffffffaf1d6270 R09: 3a34303a30303030 R10: 34303a303030305b R11: 2078787832616c71 R12: ffff9dfb46b78dd4 R13: ffff9dfb46b78c24 R14: ffff9dfb41525300 R15: ffff9dfb46b78da8 FS: 0000000000000000(0000) GS:ffff9dfc67c00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000070 CR3: 000000018da10004 CR4: 00000000000206f0 Call Trace: qla_nvme_register_remote+0xeb/0x1f0 [qla2xxx] ? qla2x00_dfs_create_rport+0x231/0x270 [qla2xxx] qla2x00_update_fcport+0x2a1/0x3c0 [qla2xxx] qla_register_fcport_fn+0x54/0xc0 [qla2xxx] Exit the qla_nvme_register_remote() function when qla_nvme_register_hba() fails and correctly validate nvme_local_port.

Published Aug 17, 2024 · Updated Aug 5, 2026

Critical · CVSS 9.8

CVE-2024-42285: RDMA/iwcm: Fix a use-after-free related to destroying CM IDs

In the Linux kernel, the following vulnerability has been resolved: RDMA/iwcm: Fix a use-after-free related to destroying CM IDs iw_conn_req_handler() associates a new struct rdma_id_private (conn_id) with an existing struct iw_cm_id (cm_id) as follows: conn_id->cm_id.iw = cm_id; cm_id->context = conn_id; cm_id->cm_handler = cma_iw_handler; rdma_destroy_id() frees both the cm_id and the struct rdma_id_private. Make sure that cm_work_handler() does not trigger a use-after-free by only freeing of the struct rdma_id_private after all pending work has finished.

Published Aug 17, 2024 · Updated Aug 5, 2026

Critical · CVSS 9.1

CVE-2024-42284: tipc: Return non-zero value from tipc_udp_addr2str() on error

In the Linux kernel, the following vulnerability has been resolved: tipc: Return non-zero value from tipc_udp_addr2str() on error tipc_udp_addr2str() should return non-zero value if the UDP media address is invalid. Otherwise, a buffer overflow access can occur in tipc_media_addr_printf(). Fix this by returning 1 on an invalid UDP media address.

Published Aug 17, 2024 · Updated Aug 5, 2026

High · CVSS 7.8

CVE-2024-42279: spi: microchip-core: ensure TX and RX FIFOs are empty at start of a transfer

In the Linux kernel, the following vulnerability has been resolved: spi: microchip-core: ensure TX and RX FIFOs are empty at start of a transfer While transmitting with rx_len == 0, the RX FIFO is not going to be emptied in the interrupt handler. A subsequent transfer could then read crap from the previous transfer out of the RX FIFO into the start RX buffer. The core provides a register that will empty the RX and TX FIFOs, so do that before each transfer.

Published Aug 17, 2024 · Updated Aug 5, 2026

High · CVSS 7.8

CVE-2024-42276: nvme-pci: add missing condition check for existence of mapped data

In the Linux kernel, the following vulnerability has been resolved: nvme-pci: add missing condition check for existence of mapped data nvme_map_data() is called when request has physical segments, hence the nvme_unmap_data() should have same condition to avoid dereference.

Published Aug 17, 2024 · Updated Aug 5, 2026

High · CVSS 7.8

CVE-2024-42275: drm/client: Fix error code in drm_client_buffer_vmap_local()

In the Linux kernel, the following vulnerability has been resolved: drm/client: Fix error code in drm_client_buffer_vmap_local() This function accidentally returns zero/success on the failure path. It leads to locking issues and an uninitialized *map_copy in the caller.

Published Aug 17, 2024 · Updated Aug 5, 2026

High · CVSS 7.8

CVE-2024-42273: f2fs: assign CURSEG_ALL_DATA_ATGC if blkaddr is valid

In the Linux kernel, the following vulnerability has been resolved: f2fs: assign CURSEG_ALL_DATA_ATGC if blkaddr is valid mkdir /mnt/test/comp f2fs_io setflags compression /mnt/test/comp dd if=/dev/zero of=/mnt/test/comp/testfile bs=16k count=1 truncate --size 13 /mnt/test/comp/testfile In the above scenario, we can get a BUG_ON. kernel BUG at fs/f2fs/segment.c:3589! Call Trace: do_write_page+0x78/0x390 [f2fs] f2fs_outplace_write_data+0x62/0xb0 [f2fs] f2fs_do_write_data_page+0x275/0x740 [f2fs] f2fs_write_single_data_page+0x1dc/0x8f0 [f2fs] f2fs_write_multi_pages+0x1e5/0xae0 [f2fs] f2fs_write_cache_pages+0xab1/0xc60 [f2fs] f2fs_write_data_pages+0x2d8/0x330 [f2fs] do_writepages+0xcf/0x270 __writeback_single_inode+0x44/0x350 writeback_sb_inodes+0x242/0x530 __writeback_inodes_wb+0x54/0xf0 wb_writeback+0x192/0x310 wb_workfn+0x30d/0x400 The reason is we gave CURSEG_ALL_DATA_ATGC to COMPR_ADDR where the page was set the gcing flag by set_cluster_dirty().

Published Aug 17, 2024 · Updated Aug 5, 2026

High · CVSS 7.8

CVE-2024-42272: sched: act_ct: take care of padding in struct zones_ht_key

In the Linux kernel, the following vulnerability has been resolved: sched: act_ct: take care of padding in struct zones_ht_key Blamed commit increased lookup key size from 2 bytes to 16 bytes, because zones_ht_key got a struct net pointer. Make sure rhashtable_lookup() is not using the padding bytes which are not initialized. BUG: KMSAN: uninit-value in rht_ptr_rcu include/linux/rhashtable.h:376 [inline] BUG: KMSAN: uninit-value in __rhashtable_lookup include/linux/rhashtable.h:607 [inline] BUG: KMSAN: uninit-value in rhashtable_lookup include/linux/rhashtable.h:646 [inline] BUG: KMSAN: uninit-value in rhashtable_lookup_fast include/linux/rhashtable.h:672 [inline] BUG: KMSAN: uninit-value in tcf_ct_flow_table_get+0x611/0x2260 net/sched/act_ct.c:329 rht_ptr_rcu include/linux/rhashtable.h:376 [inline] __rhashtable_lookup include/linux/rhashtable.h:607 [inline] rhashtable_lookup include/linux/rhashtable.h:646 [inline] rhashtable_lookup_fast include/linux/rhashtable.h:672 [inline] tcf_ct_flow_table_get+0x611/0x2260 net/sched/act_ct.c:329 tcf_ct_init+0xa67/0x2890 net/sched/act_ct.c:1408 tcf_action_init_1+0x6cc/0xb30 net/sched/act_api.c:1425 tcf_action_init+0x458/0xf00 net/sched/act_api.c:1488 tcf_action_add net/sched/act_api.c:2061 [inline] tc_ctl_action+0x4be/0x19d0 net/sched/act_api.c:2118 rtnetlink_rcv_msg+0x12fc/0x1410 net/core/rtnetlink.c:6647 netlink_rcv_skb+0x375/0x650 net/netlink/af_netlink.c:2550 rtnetlink_rcv+0x34/0x40 net/core/rtnetlink.c:6665 netlink_unicast_kernel net/netlink/af_netlink.c:1331 [inline] netlink_unicast+0xf52/0x1260 net/netlink/af_netlink.c:1357 netlink_sendmsg+0x10da/0x11e0 net/netlink/af_netlink.c:1901 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg+0x30f/0x380 net/socket.c:745 ____sys_sendmsg+0x877/0xb60 net/socket.c:2597 ___sys_sendmsg+0x28d/0x3c0 net/socket.c:2651 __sys_sendmsg net/socket.c:2680 [inline] __do_sys_sendmsg net/socket.c:2689 [inline] __se_sys_sendmsg net/socket.c:2687 [inline] __x64_sys_sendmsg+0x307/0x4a0 net/socket.c:2687 x64_sys_call+0x2dd6/0x3c10 arch/x86/include/generated/asm/syscalls_64.h:47 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xcd/0x1e0 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f Local variable key created at: tcf_ct_flow_table_get+0x4a/0x2260 net/sched/act_ct.c:324 tcf_ct_init+0xa67/0x2890 net/sched/act_ct.c:1408

Published Aug 17, 2024 · Updated Aug 5, 2026

High · CVSS 7.8

CVE-2024-42271: net/iucv: fix use after free in iucv_sock_close()

In the Linux kernel, the following vulnerability has been resolved: net/iucv: fix use after free in iucv_sock_close() iucv_sever_path() is called from process context and from bh context. iucv->path is used as indicator whether somebody else is taking care of severing the path (or it is already removed / never existed). This needs to be done with atomic compare and swap, otherwise there is a small window where iucv_sock_close() will try to work with a path that has already been severed and freed by iucv_callback_connrej() called by iucv_tasklet_fn(). Example: [452744.123844] Call Trace: [452744.123845] ([<0000001e87f03880>] 0x1e87f03880) [452744.123966] [<00000000d593001e>] iucv_path_sever+0x96/0x138 [452744.124330] [<000003ff801ddbca>] iucv_sever_path+0xc2/0xd0 [af_iucv] [452744.124336] [<000003ff801e01b6>] iucv_sock_close+0xa6/0x310 [af_iucv] [452744.124341] [<000003ff801e08cc>] iucv_sock_release+0x3c/0xd0 [af_iucv] [452744.124345] [<00000000d574794e>] __sock_release+0x5e/0xe8 [452744.124815] [<00000000d5747a0c>] sock_close+0x34/0x48 [452744.124820] [<00000000d5421642>] __fput+0xba/0x268 [452744.124826] [<00000000d51b382c>] task_work_run+0xbc/0xf0 [452744.124832] [<00000000d5145710>] do_notify_resume+0x88/0x90 [452744.124841] [<00000000d5978096>] system_call+0xe2/0x2c8 [452744.125319] Last Breaking-Event-Address: [452744.125321] [<00000000d5930018>] iucv_path_sever+0x90/0x138 [452744.125324] [452744.125325] Kernel panic - not syncing: Fatal exception in interrupt Note that bh_lock_sock() is not serializing the tasklet context against process context, because the check for sock_owned_by_user() and corresponding handling is missing. Ideas for a future clean-up patch: A) Correct usage of bh_lock_sock() in tasklet context, as described in Re-enqueue, if needed. This may require adding return values to the tasklet functions and thus changes to all users of iucv. B) Change iucv tasklet into worker and use only lock_sock() in af_iucv.

Published Aug 17, 2024 · Updated Aug 5, 2026

High · CVSS 7.8

CVE-2024-42266: btrfs: make cow_file_range_inline() honor locked_page on error

In the Linux kernel, the following vulnerability has been resolved: btrfs: make cow_file_range_inline() honor locked_page on error The btrfs buffered write path runs through __extent_writepage() which has some tricky return value handling for writepage_delalloc(). Specifically, when that returns 1, we exit, but for other return values we continue and end up calling btrfs_folio_end_all_writers(). If the folio has been unlocked (note that we check the PageLocked bit at the start of __extent_writepage()), this results in an assert panic like this one from syzbot: BTRFS: error (device loop0 state EAL) in free_log_tree:3267: errno=-5 IO failure BTRFS warning (device loop0 state EAL): Skipping commit of aborted transaction. BTRFS: error (device loop0 state EAL) in cleanup_transaction:2018: errno=-5 IO failure assertion failed: folio_test_locked(folio), in fs/btrfs/subpage.c:871 ------------[ cut here ]------------ kernel BUG at fs/btrfs/subpage.c:871! Oops: invalid opcode: 0000 [#1] PREEMPT SMP KASAN PTI CPU: 1 PID: 5090 Comm: syz-executor225 Not tainted 6.10.0-syzkaller-05505-gb1bc554e009e #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 06/27/2024 RIP: 0010:btrfs_folio_end_all_writers+0x55b/0x610 fs/btrfs/subpage.c:871 Code: e9 d3 fb ff ff e8 25 22 c2 fd 48 c7 c7 c0 3c 0e 8c 48 c7 c6 80 3d 0e 8c 48 c7 c2 60 3c 0e 8c b9 67 03 00 00 e8 66 47 ad 07 90 <0f> 0b e8 6e 45 b0 07 4c 89 ff be 08 00 00 00 e8 21 12 25 fe 4c 89 RSP: 0018:ffffc900033d72e0 EFLAGS: 00010246 RAX: 0000000000000045 RBX: 00fff0000000402c RCX: 663b7a08c50a0a00 RDX: 0000000000000000 RSI: 0000000080000000 RDI: 0000000000000000 RBP: ffffc900033d73b0 R08: ffffffff8176b98c R09: 1ffff9200067adfc R10: dffffc0000000000 R11: fffff5200067adfd R12: 0000000000000001 R13: dffffc0000000000 R14: 0000000000000000 R15: ffffea0001cbee80 FS: 0000000000000000(0000) GS:ffff8880b9500000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f5f076012f8 CR3: 000000000e134000 CR4: 00000000003506f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> __extent_writepage fs/btrfs/extent_io.c:1597 [inline] extent_write_cache_pages fs/btrfs/extent_io.c:2251 [inline] btrfs_writepages+0x14d7/0x2760 fs/btrfs/extent_io.c:2373 do_writepages+0x359/0x870 mm/page-writeback.c:2656 filemap_fdatawrite_wbc+0x125/0x180 mm/filemap.c:397 __filemap_fdatawrite_range mm/filemap.c:430 [inline] __filemap_fdatawrite mm/filemap.c:436 [inline] filemap_flush+0xdf/0x130 mm/filemap.c:463 btrfs_release_file+0x117/0x130 fs/btrfs/file.c:1547 __fput+0x24a/0x8a0 fs/file_table.c:422 task_work_run+0x24f/0x310 kernel/task_work.c:222 exit_task_work include/linux/task_work.h:40 [inline] do_exit+0xa2f/0x27f0 kernel/exit.c:877 do_group_exit+0x207/0x2c0 kernel/exit.c:1026 __do_sys_exit_group kernel/exit.c:1037 [inline] __se_sys_exit_group kernel/exit.c:1035 [inline] __x64_sys_exit_group+0x3f/0x40 kernel/exit.c:1035 x64_sys_call+0x2634/0x2640 arch/x86/include/generated/asm/syscalls_64.h:232 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7f5f075b70c9 Code: Unable to access opcode bytes at 0x7f5f075b709f. I was hitting the same issue by doing hundreds of accelerated runs of generic/475, which also hits IO errors by design. I instrumented that reproducer with bpftrace and found that the undesirable folio_unlock was coming from the following callstack: folio_unlock+5 __process_pages_contig+475 cow_file_range_inline.constprop.0+230 cow_file_range+803 btrfs_run_delalloc_range+566 writepage_delalloc+332 __extent_writepage # inlined in my stacktrace, but I added it here extent_write_cache_pages+622 Looking at the bisected-to pa ---truncated---

Published Aug 17, 2024 · Updated Aug 5, 2026

High · CVSS 7.8

CVE-2024-42264: drm/v3d: Prevent out of bounds access in performance query extensions

In the Linux kernel, the following vulnerability has been resolved: drm/v3d: Prevent out of bounds access in performance query extensions Check that the number of perfmons userspace is passing in the copy and reset extensions is not greater than the internal kernel storage where the ids will be copied into. (cherry picked from commit f32b5128d2c440368b5bf3a7a356823e235caabb)

Published Aug 17, 2024 · Updated Aug 5, 2026

High · CVSS 7.8

CVE-2024-42259: drm/i915/gem: Fix Virtual Memory mapping boundaries calculation

In the Linux kernel, the following vulnerability has been resolved: drm/i915/gem: Fix Virtual Memory mapping boundaries calculation Calculating the size of the mapped area as the lesser value between the requested size and the actual size does not consider the partial mapping offset. This can cause page fault access. Fix the calculation of the starting and ending addresses, the total size is now deduced from the difference between the end and start addresses. Additionally, the calculations have been rewritten in a clearer and more understandable form. [Joonas: Add Requires: tag] Requires: 60a2066c5005 ("drm/i915/gem: Adjust vma offset for framebuffer mmap offset") (cherry picked from commit 97b6784753da06d9d40232328efc5c5367e53417)

Published Aug 14, 2024 · Updated Aug 5, 2026

High · CVSS 7.1

CVE-2024-42258: mm: huge_memory: use !CONFIG_64BIT to relax huge page alignment on 32 bit machines

In the Linux kernel, the following vulnerability has been resolved: mm: huge_memory: use !CONFIG_64BIT to relax huge page alignment on 32 bit machines Yves-Alexis Perez reported commit 4ef9ad19e176 ("mm: huge_memory: don't force huge page alignment on 32 bit") didn't work for x86_32 [1]. It is because x86_32 uses CONFIG_X86_32 instead of CONFIG_32BIT. !CONFIG_64BIT should cover all 32 bit machines. [1] https://lore.kernel.org/linux-mm/CAHbLzkr1LwH3pcTgM+aGQ31ip2bKqiqEQ8=FQB+t2c3dhNKNHA@mail.gmail.com/

Published Aug 12, 2024 · Updated Aug 5, 2026

High · CVSS 7.5

CVE-2024-42256: cifs: Fix server re-repick on subrequest retry

In the Linux kernel, the following vulnerability has been resolved: cifs: Fix server re-repick on subrequest retry When a subrequest is marked for needing retry, netfs will call cifs_prepare_write() which will make cifs repick the server for the op before renegotiating credits; it then calls cifs_issue_write() which invokes smb2_async_writev() - which re-repicks the server. If a different server is then selected, this causes the increment of server->in_flight to happen against one record and the decrement to happen against another, leading to misaccounting. Fix this by just removing the repick code in smb2_async_writev(). As this is only called from netfslib-driven code, cifs_prepare_write() should always have been called first, and so server should never be NULL and the preparatory step is repeated in the event that we do a retry. The problem manifests as a warning looking something like: WARNING: CPU: 4 PID: 72896 at fs/smb/client/smb2ops.c:97 smb2_add_credits+0x3f0/0x9e0 [cifs] ... RIP: 0010:smb2_add_credits+0x3f0/0x9e0 [cifs] ... smb2_writev_callback+0x334/0x560 [cifs] cifs_demultiplex_thread+0x77a/0x11b0 [cifs] kthread+0x187/0x1d0 ret_from_fork+0x34/0x60 ret_from_fork_asm+0x1a/0x30 Which may be triggered by a number of different xfstests running against an Azure server in multichannel mode. generic/249 seems the most repeatable, but generic/215, generic/249 and generic/308 may also show it.

Published Aug 8, 2024 · Updated Aug 5, 2026

High · CVSS 7.8

CVE-2024-42253: gpio: pca953x: fix pca953x_irq_bus_sync_unlock race

In the Linux kernel, the following vulnerability has been resolved: gpio: pca953x: fix pca953x_irq_bus_sync_unlock race Ensure that `i2c_lock' is held when setting interrupt latch and mask in pca953x_irq_bus_sync_unlock() in order to avoid races. The other (non-probe) call site pca953x_gpio_set_multiple() ensures the lock is held before calling pca953x_write_regs(). The problem occurred when a request raced against irq_bus_sync_unlock() approximately once per thousand reboots on an i.MX8MP based system. * Normal case 0-0022: write register AI|3a {03,02,00,00,01} Input latch P0 0-0022: write register AI|49 {fc,fd,ff,ff,fe} Interrupt mask P0 0-0022: write register AI|08 {ff,00,00,00,00} Output P3 0-0022: write register AI|12 {fc,00,00,00,00} Config P3 * Race case 0-0022: write register AI|08 {ff,00,00,00,00} Output P3 0-0022: write register AI|08 {03,02,00,00,01} *** Wrong register *** 0-0022: write register AI|12 {fc,00,00,00,00} Config P3 0-0022: write register AI|49 {fc,fd,ff,ff,fe} Interrupt mask P0

Published Aug 8, 2024 · Updated Aug 5, 2026

High · CVSS 7.8

CVE-2024-42250: cachefiles: add missing lock protection when polling

In the Linux kernel, the following vulnerability has been resolved: cachefiles: add missing lock protection when polling Add missing lock protection in poll routine when iterating xarray, otherwise: Even with RCU read lock held, only the slot of the radix tree is ensured to be pinned there, while the data structure (e.g. struct cachefiles_req) stored in the slot has no such guarantee. The poll routine will iterate the radix tree and dereference cachefiles_req accordingly. Thus RCU read lock is not adequate in this case and spinlock is needed here.

Published Aug 7, 2024 · Updated Aug 5, 2026

High · CVSS 7.8

CVE-2024-42249: spi: don't unoptimize message in spi_async()

In the Linux kernel, the following vulnerability has been resolved: spi: don't unoptimize message in spi_async() Calling spi_maybe_unoptimize_message() in spi_async() is wrong because the message is likely to be in the queue and not transferred yet. This can corrupt the message while it is being used by the controller driver. spi_maybe_unoptimize_message() is already called in the correct place in spi_finalize_current_message() to balance the call to spi_maybe_optimize_message() in spi_async().

Published Aug 7, 2024 · Updated Aug 5, 2026

High · CVSS 7.5

CVE-2024-42247: wireguard: allowedips: avoid unaligned 64-bit memory accesses

In the Linux kernel, the following vulnerability has been resolved: wireguard: allowedips: avoid unaligned 64-bit memory accesses On the parisc platform, the kernel issues kernel warnings because swap_endian() tries to load a 128-bit IPv6 address from an unaligned memory location: Kernel: unaligned access to 0x55f4688c in wg_allowedips_insert_v6+0x2c/0x80 [wireguard] (iir 0xf3010df) Kernel: unaligned access to 0x55f46884 in wg_allowedips_insert_v6+0x38/0x80 [wireguard] (iir 0xf2010dc) Avoid such unaligned memory accesses by instead using the get_unaligned_be64() helper macro. [Jason: replace src[8] in original patch with src+8]

Published Aug 7, 2024 · Updated Aug 5, 2026

High · CVSS 7.8

CVE-2024-42236: usb: gadget: configfs: Prevent OOB read/write in usb_string_copy()

In the Linux kernel, the following vulnerability has been resolved: usb: gadget: configfs: Prevent OOB read/write in usb_string_copy() Userspace provided string 's' could trivially have the length zero. Left unchecked this will firstly result in an OOB read in the form `if (str[0 - 1] == '\n') followed closely by an OOB write in the form `str[0 - 1] = '\0'`. There is already a validating check to catch strings that are too long. Let's supply an additional check for invalid strings that are too short.

Published Aug 7, 2024 · Updated Aug 5, 2026

High · CVSS 7.8

CVE-2024-42235: s390/mm: Add NULL pointer check to crst_table_free() base_crst_free()

In the Linux kernel, the following vulnerability has been resolved: s390/mm: Add NULL pointer check to crst_table_free() base_crst_free() crst_table_free() used to work with NULL pointers before the conversion to ptdescs. Since crst_table_free() can be called with a NULL pointer (error handling in crst_table_upgrade() add an explicit check. Also add the same check to base_crst_free() for consistency reasons. In real life this should not happen, since order two GFP_KERNEL allocations will not fail, unless FAIL_PAGE_ALLOC is enabled and used.

Published Aug 7, 2024 · Updated Aug 5, 2026

High · CVSS 7.8

CVE-2024-42234: mm: fix crashes from deferred split racing folio migration

In the Linux kernel, the following vulnerability has been resolved: mm: fix crashes from deferred split racing folio migration Even on 6.10-rc6, I've been seeing elusive "Bad page state"s (often on flags when freeing, yet the flags shown are not bad: PG_locked had been set and cleared??), and VM_BUG_ON_PAGE(page_ref_count(page) == 0)s from deferred_split_scan()'s folio_put(), and a variety of other BUG and WARN symptoms implying double free by deferred split and large folio migration. 6.7 commit 9bcef5973e31 ("mm: memcg: fix split queue list crash when large folio migration") was right to fix the memcg-dependent locking broken in 85ce2c517ade ("memcontrol: only transfer the memcg data for migration"), but missed a subtlety of deferred_split_scan(): it moves folios to its own local list to work on them without split_queue_lock, during which time folio->_deferred_list is not empty, but even the "right" lock does nothing to secure the folio and the list it is on. Fortunately, deferred_split_scan() is careful to use folio_try_get(): so folio_migrate_mapping() can avoid the race by folio_undo_large_rmappable() while the old folio's reference count is temporarily frozen to 0 - adding such a freeze in the !mapping case too (originally, folio lock and unmapping and no swap cache left an anon folio unreachable, so no freezing was needed there: but the deferred split queue offers a way to reach it).

Published Aug 7, 2024 · Updated Aug 5, 2026

High · CVSS 7.8

CVE-2024-42233: filemap: replace pte_offset_map() with pte_offset_map_nolock()

In the Linux kernel, the following vulnerability has been resolved: filemap: replace pte_offset_map() with pte_offset_map_nolock() The vmf->ptl in filemap_fault_recheck_pte_none() is still set from handle_pte_fault(). But at the same time, we did a pte_unmap(vmf->pte). After a pte_unmap(vmf->pte) unmap and rcu_read_unlock(), the page table may be racily changed and vmf->ptl maybe fails to protect the actual page table. Fix this by replacing pte_offset_map() with pte_offset_map_nolock(). As David said, the PTL pointer might be stale so if we continue to use it infilemap_fault_recheck_pte_none(), it might trigger UAF. Also, if the PTL fails, the issue fixed by commit 58f327f2ce80 ("filemap: avoid unnecessary major faults in filemap_fault()") might reappear.

Published Aug 7, 2024 · Updated Aug 5, 2026

Critical · CVSS 9.8

CVE-2024-42232: libceph: fix race between delayed_work() and ceph_monc_stop()

In the Linux kernel, the following vulnerability has been resolved: libceph: fix race between delayed_work() and ceph_monc_stop() The way the delayed work is handled in ceph_monc_stop() is prone to races with mon_fault() and possibly also finish_hunting(). Both of these can requeue the delayed work which wouldn't be canceled by any of the following code in case that happens after cancel_delayed_work_sync() runs -- __close_session() doesn't mess with the delayed work in order to avoid interfering with the hunting interval logic. This part was missed in commit b5d91704f53e ("libceph: behave in mon_fault() if cur_mon < 0") and use-after-free can still ensue on monc and objects that hang off of it, with monc->auth and monc->monmap being particularly susceptible to quickly being reused. To fix this: - clear monc->cur_mon and monc->hunting as part of closing the session in ceph_monc_stop() - bail from delayed_work() if monc->cur_mon is cleared, similar to how it's done in mon_fault() and finish_hunting() (based on monc->hunting) - call cancel_delayed_work_sync() after the session is closed

Published Aug 7, 2024 · Updated Aug 5, 2026

High · CVSS 7

CVE-2024-42224: net: dsa: mv88e6xxx: Correct check for empty list

In the Linux kernel, the following vulnerability has been resolved: net: dsa: mv88e6xxx: Correct check for empty list Since commit a3c53be55c95 ("net: dsa: mv88e6xxx: Support multiple MDIO busses") mv88e6xxx_default_mdio_bus() has checked that the return value of list_first_entry() is non-NULL. This appears to be intended to guard against the list chip->mdios being empty. However, it is not the correct check as the implementation of list_first_entry is not designed to return NULL for empty lists. Instead, use list_first_entry_or_null() which does return NULL if the list is empty. Flagged by Smatch. Compile tested only.

Published Jul 30, 2024 · Updated Aug 5, 2026

High · CVSS 7.8

CVE-2024-42162: gve: Account for stopped queues when reading NIC stats

In the Linux kernel, the following vulnerability has been resolved: gve: Account for stopped queues when reading NIC stats We now account for the fact that the NIC might send us stats for a subset of queues. Without this change, gve_get_ethtool_stats might make an invalid access on the priv->stats_report->stats array.

Published Jul 30, 2024 · Updated Aug 5, 2026

High · CVSS 7.5

CVE-2024-42152: nvmet: fix a possible leak when destroy a ctrl during qp establishment

In the Linux kernel, the following vulnerability has been resolved: nvmet: fix a possible leak when destroy a ctrl during qp establishment In nvmet_sq_destroy we capture sq->ctrl early and if it is non-NULL we know that a ctrl was allocated (in the admin connect request handler) and we need to release pending AERs, clear ctrl->sqs and sq->ctrl (for nvme-loop primarily), and drop the final reference on the ctrl. However, a small window is possible where nvmet_sq_destroy starts (as a result of the client giving up and disconnecting) concurrently with the nvme admin connect cmd (which may be in an early stage). But *before* kill_and_confirm of sq->ref (i.e. the admin connect managed to get an sq live reference). In this case, sq->ctrl was allocated however after it was captured in a local variable in nvmet_sq_destroy. This prevented the final reference drop on the ctrl. Solve this by re-capturing the sq->ctrl after all inflight request has completed, where for sure sq->ctrl reference is final, and move forward based on that. This issue was observed in an environment with many hosts connecting multiple ctrls simoutanuosly, creating a delay in allocating a ctrl leading up to this race window.

Published Jul 30, 2024 · Updated Aug 5, 2026

High · CVSS 7.5

CVE-2024-42145: IB/core: Implement a limit on UMAD receive List

In the Linux kernel, the following vulnerability has been resolved: IB/core: Implement a limit on UMAD receive List The existing behavior of ib_umad, which maintains received MAD packets in an unbounded list, poses a risk of uncontrolled growth. As user-space applications extract packets from this list, the rate of extraction may not match the rate of incoming packets, leading to potential list overflow. To address this, we introduce a limit to the size of the list. After considering typical scenarios, such as OpenSM processing, which can handle approximately 100k packets per second, and the 1-second retry timeout for most packets, we set the list size limit to 200k. Packets received beyond this limit are dropped, assuming they are likely timed out by the time they are handled by user-space. Notably, packets queued on the receive list due to reasons like timed-out sends are preserved even when the list is full.

Published Jul 30, 2024 · Updated Aug 5, 2026

High · CVSS 7.6

CVE-2024-42133: Bluetooth: Ignore too large handle values in BIG

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: Ignore too large handle values in BIG hci_le_big_sync_established_evt is necessary to filter out cases where the handle value is belonging to ida id range, otherwise ida will be erroneously released in hci_conn_cleanup.

Published Jul 30, 2024 · Updated Aug 5, 2026

High · CVSS 7.6

CVE-2024-42132: bluetooth/hci: disallow setting handle bigger than HCI_CONN_HANDLE_MAX

In the Linux kernel, the following vulnerability has been resolved: bluetooth/hci: disallow setting handle bigger than HCI_CONN_HANDLE_MAX Syzbot hit warning in hci_conn_del() caused by freeing handle that was not allocated using ida allocator. This is caused by handle bigger than HCI_CONN_HANDLE_MAX passed by hci_le_big_sync_established_evt(), which makes code think it's unset connection. Add same check for handle upper bound as in hci_conn_set_handle() to prevent warning.

Published Jul 30, 2024 · Updated Aug 5, 2026

High · CVSS 7

CVE-2024-42123: drm/amdgpu: fix double free err_addr pointer warnings

In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: fix double free err_addr pointer warnings In amdgpu_umc_bad_page_polling_timeout, the amdgpu_umc_handle_bad_pages will be run many times so that double free err_addr in some special case. So set the err_addr to NULL to avoid the warnings.

Published Jul 30, 2024 · Updated Aug 5, 2026

High · CVSS 7.8

CVE-2024-42120: drm/amd/display: Check pipe offset before setting vblank

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Check pipe offset before setting vblank pipe_ctx has a size of MAX_PIPES so checking its index before accessing the array. This fixes an OVERRUN issue reported by Coverity.

Published Jul 30, 2024 · Updated Aug 5, 2026

High · CVSS 7.8

CVE-2024-42117: drm/amd/display: ASSERT when failing to find index by plane/stream id

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: ASSERT when failing to find index by plane/stream id [WHY] find_disp_cfg_idx_by_plane_id and find_disp_cfg_idx_by_stream_id returns an array index and they return -1 when not found; however, -1 is not a valid index number. [HOW] When this happens, call ASSERT(), and return a positive number (which is fewer than callers' array size) instead. This fixes 4 OVERRUN and 2 NEGATIVE_RETURNS issues reported by Coverity.

Published Jul 30, 2024 · Updated Aug 5, 2026

High · CVSS 7.8

CVE-2024-42115: jffs2: Fix potential illegal address access in jffs2_free_inode

In the Linux kernel, the following vulnerability has been resolved: jffs2: Fix potential illegal address access in jffs2_free_inode During the stress testing of the jffs2 file system,the following abnormal printouts were found: [ 2430.649000] Unable to handle kernel paging request at virtual address 0069696969696948 [ 2430.649622] Mem abort info: [ 2430.649829] ESR = 0x96000004 [ 2430.650115] EC = 0x25: DABT (current EL), IL = 32 bits [ 2430.650564] SET = 0, FnV = 0 [ 2430.650795] EA = 0, S1PTW = 0 [ 2430.651032] FSC = 0x04: level 0 translation fault [ 2430.651446] Data abort info: [ 2430.651683] ISV = 0, ISS = 0x00000004 [ 2430.652001] CM = 0, WnR = 0 [ 2430.652558] [0069696969696948] address between user and kernel address ranges [ 2430.653265] Internal error: Oops: 96000004 [#1] PREEMPT SMP [ 2430.654512] CPU: 2 PID: 20919 Comm: cat Not tainted 5.15.25-g512f31242bf6 #33 [ 2430.655008] Hardware name: linux,dummy-virt (DT) [ 2430.655517] pstate: 20000005 (nzCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 2430.656142] pc : kfree+0x78/0x348 [ 2430.656630] lr : jffs2_free_inode+0x24/0x48 [ 2430.657051] sp : ffff800009eebd10 [ 2430.657355] x29: ffff800009eebd10 x28: 0000000000000001 x27: 0000000000000000 [ 2430.658327] x26: ffff000038f09d80 x25: 0080000000000000 x24: ffff800009d38000 [ 2430.658919] x23: 5a5a5a5a5a5a5a5a x22: ffff000038f09d80 x21: ffff8000084f0d14 [ 2430.659434] x20: ffff0000bf9a6ac0 x19: 0169696969696940 x18: 0000000000000000 [ 2430.659969] x17: ffff8000b6506000 x16: ffff800009eec000 x15: 0000000000004000 [ 2430.660637] x14: 0000000000000000 x13: 00000001000820a1 x12: 00000000000d1b19 [ 2430.661345] x11: 0004000800000000 x10: 0000000000000001 x9 : ffff8000084f0d14 [ 2430.662025] x8 : ffff0000bf9a6b40 x7 : ffff0000bf9a6b48 x6 : 0000000003470302 [ 2430.662695] x5 : ffff00002e41dcc0 x4 : ffff0000bf9aa3b0 x3 : 0000000003470342 [ 2430.663486] x2 : 0000000000000000 x1 : ffff8000084f0d14 x0 : fffffc0000000000 [ 2430.664217] Call trace: [ 2430.664528] kfree+0x78/0x348 [ 2430.664855] jffs2_free_inode+0x24/0x48 [ 2430.665233] i_callback+0x24/0x50 [ 2430.665528] rcu_do_batch+0x1ac/0x448 [ 2430.665892] rcu_core+0x28c/0x3c8 [ 2430.666151] rcu_core_si+0x18/0x28 [ 2430.666473] __do_softirq+0x138/0x3cc [ 2430.666781] irq_exit+0xf0/0x110 [ 2430.667065] handle_domain_irq+0x6c/0x98 [ 2430.667447] gic_handle_irq+0xac/0xe8 [ 2430.667739] call_on_irq_stack+0x28/0x54 The parameter passed to kfree was 5a5a5a5a, which corresponds to the target field of the jffs_inode_info structure. It was found that all variables in the jffs_inode_info structure were 5a5a5a5a, except for the first member sem. It is suspected that these variables are not initialized because they were set to 5a5a5a5a during memory testing, which is meant to detect uninitialized memory.The sem variable is initialized in the function jffs2_i_init_once, while other members are initialized in the function jffs2_init_inode_info. The function jffs2_init_inode_info is called after iget_locked, but in the iget_locked function, the destroy_inode process is triggered, which releases the inode and consequently, the target member of the inode is not initialized.In concurrent high pressure scenarios, iget_locked may enter the destroy_inode branch as described in the code. Since the destroy_inode functionality of jffs2 only releases the target, the fix method is to set target to NULL in jffs2_i_init_once.

Published Jul 30, 2024 · Updated Aug 5, 2026

High · CVSS 7.8

CVE-2024-42112: net: txgbe: free isb resources at the right time

In the Linux kernel, the following vulnerability has been resolved: net: txgbe: free isb resources at the right time When using MSI/INTx interrupt, the shared interrupts are still being handled in the device remove routine, before free IRQs. So isb memory is still read after it is freed. Thus move wx_free_isb_resources() from txgbe_close() to txgbe_remove(). And fix the improper isb free action in txgbe_open() error handling path.

Published Jul 30, 2024 · Updated Aug 5, 2026

High · CVSS 7.8

CVE-2024-42111: btrfs: always do the basic checks for btrfs_qgroup_inherit structure

In the Linux kernel, the following vulnerability has been resolved: btrfs: always do the basic checks for btrfs_qgroup_inherit structure [BUG] Syzbot reports the following regression detected by KASAN: BUG: KASAN: slab-out-of-bounds in btrfs_qgroup_inherit+0x42e/0x2e20 fs/btrfs/qgroup.c:3277 Read of size 8 at addr ffff88814628ca50 by task syz-executor318/5171 CPU: 0 PID: 5171 Comm: syz-executor318 Not tainted 6.10.0-rc2-syzkaller-00010-g2ab795141095 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 04/02/2024 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x241/0x360 lib/dump_stack.c:114 print_address_description mm/kasan/report.c:377 [inline] print_report+0x169/0x550 mm/kasan/report.c:488 kasan_report+0x143/0x180 mm/kasan/report.c:601 btrfs_qgroup_inherit+0x42e/0x2e20 fs/btrfs/qgroup.c:3277 create_pending_snapshot+0x1359/0x29b0 fs/btrfs/transaction.c:1854 create_pending_snapshots+0x195/0x1d0 fs/btrfs/transaction.c:1922 btrfs_commit_transaction+0xf20/0x3740 fs/btrfs/transaction.c:2382 create_snapshot+0x6a1/0x9e0 fs/btrfs/ioctl.c:875 btrfs_mksubvol+0x58f/0x710 fs/btrfs/ioctl.c:1029 btrfs_mksnapshot+0xb5/0xf0 fs/btrfs/ioctl.c:1075 __btrfs_ioctl_snap_create+0x387/0x4b0 fs/btrfs/ioctl.c:1340 btrfs_ioctl_snap_create_v2+0x1f2/0x3a0 fs/btrfs/ioctl.c:1422 btrfs_ioctl+0x99e/0xc60 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:907 [inline] __se_sys_ioctl+0xfc/0x170 fs/ioctl.c:893 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7fcbf1992509 RSP: 002b:00007fcbf1928218 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 00007fcbf1a1f618 RCX: 00007fcbf1992509 RDX: 0000000020000280 RSI: 0000000050009417 RDI: 0000000000000003 RBP: 00007fcbf1a1f610 R08: 00007ffea1298e97 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007fcbf19eb660 R13: 00000000200002b8 R14: 00007fcbf19e60c0 R15: 0030656c69662f2e </TASK> And it also pinned it down to commit b5357cb268c4 ("btrfs: qgroup: do not check qgroup inherit if qgroup is disabled"). [CAUSE] That offending commit skips the whole qgroup inherit check if qgroup is not enabled. But that also skips the very basic checks like num_ref_copies/num_excl_copies and the structure size checks. Meaning if a qgroup enable/disable race is happening at the background, and we pass a btrfs_qgroup_inherit structure when the qgroup is disabled, the check would be completely skipped. Then at the time of transaction commitment, qgroup is re-enabled and btrfs_qgroup_inherit() is going to use the incorrect structure and causing the above KASAN error. [FIX] Make btrfs_qgroup_check_inherit() only skip the source qgroup checks. So that even if invalid btrfs_qgroup_inherit structure is passed in, we can still reject invalid ones no matter if qgroup is enabled or not. Furthermore we do already have an extra safety inside btrfs_qgroup_inherit(), which would just ignore invalid qgroup sources, so even if we only skip the qgroup source check we're still safe.

Published Jul 30, 2024 · Updated Aug 5, 2026

High · CVSS 7.5

CVE-2024-42110: net: ntb_netdev: Move ntb_netdev_rx_handler() to call netif_rx() from __netif_rx()

In the Linux kernel, the following vulnerability has been resolved: net: ntb_netdev: Move ntb_netdev_rx_handler() to call netif_rx() from __netif_rx() The following is emitted when using idxd (DSA) dmanegine as the data mover for ntb_transport that ntb_netdev uses. [74412.546922] BUG: using smp_processor_id() in preemptible [00000000] code: irq/52-idxd-por/14526 [74412.556784] caller is netif_rx_internal+0x42/0x130 [74412.562282] CPU: 6 PID: 14526 Comm: irq/52-idxd-por Not tainted 6.9.5 #5 [74412.569870] Hardware name: Intel Corporation ArcherCity/ArcherCity, BIOS EGSDCRB1.E9I.1752.P05.2402080856 02/08/2024 [74412.581699] Call Trace: [74412.584514] <TASK> [74412.586933] dump_stack_lvl+0x55/0x70 [74412.591129] check_preemption_disabled+0xc8/0xf0 [74412.596374] netif_rx_internal+0x42/0x130 [74412.600957] __netif_rx+0x20/0xd0 [74412.604743] ntb_netdev_rx_handler+0x66/0x150 [ntb_netdev] [74412.610985] ntb_complete_rxc+0xed/0x140 [ntb_transport] [74412.617010] ntb_rx_copy_callback+0x53/0x80 [ntb_transport] [74412.623332] idxd_dma_complete_txd+0xe3/0x160 [idxd] [74412.628963] idxd_wq_thread+0x1a6/0x2b0 [idxd] [74412.634046] irq_thread_fn+0x21/0x60 [74412.638134] ? irq_thread+0xa8/0x290 [74412.642218] irq_thread+0x1a0/0x290 [74412.646212] ? __pfx_irq_thread_fn+0x10/0x10 [74412.651071] ? __pfx_irq_thread_dtor+0x10/0x10 [74412.656117] ? __pfx_irq_thread+0x10/0x10 [74412.660686] kthread+0x100/0x130 [74412.664384] ? __pfx_kthread+0x10/0x10 [74412.668639] ret_from_fork+0x31/0x50 [74412.672716] ? __pfx_kthread+0x10/0x10 [74412.676978] ret_from_fork_asm+0x1a/0x30 [74412.681457] </TASK> The cause is due to the idxd driver interrupt completion handler uses threaded interrupt and the threaded handler is not hard or soft interrupt context. However __netif_rx() can only be called from interrupt context. Change the call to netif_rx() in order to allow completion via normal context for dmaengine drivers that utilize threaded irq handling. While the following commit changed from netif_rx() to __netif_rx(), baebdf48c360 ("net: dev: Makes sure netif_rx() can be invoked in any context."), the change should've been a noop instead. However, the code precedes this fix should've been using netif_rx_ni() or netif_rx_any_context().

Published Jul 30, 2024 · Updated Aug 5, 2026

High · CVSS 7.8

CVE-2024-42109: netfilter: nf_tables: unconditionally flush pending work before notifier

In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_tables: unconditionally flush pending work before notifier syzbot reports: KASAN: slab-uaf in nft_ctx_update include/net/netfilter/nf_tables.h:1831 KASAN: slab-uaf in nft_commit_release net/netfilter/nf_tables_api.c:9530 KASAN: slab-uaf int nf_tables_trans_destroy_work+0x152b/0x1750 net/netfilter/nf_tables_api.c:9597 Read of size 2 at addr ffff88802b0051c4 by task kworker/1:1/45 [..] Workqueue: events nf_tables_trans_destroy_work Call Trace: nft_ctx_update include/net/netfilter/nf_tables.h:1831 [inline] nft_commit_release net/netfilter/nf_tables_api.c:9530 [inline] nf_tables_trans_destroy_work+0x152b/0x1750 net/netfilter/nf_tables_api.c:9597 Problem is that the notifier does a conditional flush, but its possible that the table-to-be-removed is still referenced by transactions being processed by the worker, so we need to flush unconditionally. We could make the flush_work depend on whether we found a table to delete in nf-next to avoid the flush for most cases. AFAICS this problem is only exposed in nf-next, with commit e169285f8c56 ("netfilter: nf_tables: do not store nft_ctx in transaction objects"), with this commit applied there is an unconditional fetch of table->family which is whats triggering the above splat.

Published Jul 30, 2024 · Updated Aug 5, 2026

Critical · CVSS 9.8

CVE-2024-42108: net: rswitch: Avoid use-after-free in rswitch_poll()

In the Linux kernel, the following vulnerability has been resolved: net: rswitch: Avoid use-after-free in rswitch_poll() The use-after-free is actually in rswitch_tx_free(), which is inlined in rswitch_poll(). Since `skb` and `gq->skbs[gq->dirty]` are in fact the same pointer, the skb is first freed using dev_kfree_skb_any(), then the value in skb->len is used to update the interface statistics. Let's move around the instructions to use skb->len before the skb is freed. This bug is trivial to reproduce using KFENCE. It will trigger a splat every few packets. A simple ARP request or ICMP echo request is enough.

Published Jul 30, 2024 · Updated Aug 5, 2026

High · CVSS 7.8

CVE-2024-42105: nilfs2: fix inode number range checks

In the Linux kernel, the following vulnerability has been resolved: nilfs2: fix inode number range checks Patch series "nilfs2: fix potential issues related to reserved inodes". This series fixes one use-after-free issue reported by syzbot, caused by nilfs2's internal inode being exposed in the namespace on a corrupted filesystem, and a couple of flaws that cause problems if the starting number of non-reserved inodes written in the on-disk super block is intentionally (or corruptly) changed from its default value. This patch (of 3): In the current implementation of nilfs2, "nilfs->ns_first_ino", which gives the first non-reserved inode number, is read from the superblock, but its lower limit is not checked. As a result, if a number that overlaps with the inode number range of reserved inodes such as the root directory or metadata files is set in the super block parameter, the inode number test macros (NILFS_MDT_INODE and NILFS_VALID_INODE) will not function properly. In addition, these test macros use left bit-shift calculations using with the inode number as the shift count via the BIT macro, but the result of a shift calculation that exceeds the bit width of an integer is undefined in the C specification, so if "ns_first_ino" is set to a large value other than the default value NILFS_USER_INO (=11), the macros may potentially malfunction depending on the environment. Fix these issues by checking the lower bound of "nilfs->ns_first_ino" and by preventing bit shifts equal to or greater than the NILFS_USER_INO constant in the inode number test macros. Also, change the type of "ns_first_ino" from signed integer to unsigned integer to avoid the need for type casting in comparisons such as the lower bound check introduced this time.

Published Jul 30, 2024 · Updated Aug 5, 2026

High · CVSS 7.8

CVE-2024-42104: nilfs2: add missing check for inode numbers on directory entries

In the Linux kernel, the following vulnerability has been resolved: nilfs2: add missing check for inode numbers on directory entries Syzbot reported that mounting and unmounting a specific pattern of corrupted nilfs2 filesystem images causes a use-after-free of metadata file inodes, which triggers a kernel bug in lru_add_fn(). As Jan Kara pointed out, this is because the link count of a metadata file gets corrupted to 0, and nilfs_evict_inode(), which is called from iput(), tries to delete that inode (ifile inode in this case). The inconsistency occurs because directories containing the inode numbers of these metadata files that should not be visible in the namespace are read without checking. Fix this issue by treating the inode numbers of these internal files as errors in the sanity check helper when reading directory folios/pages. Also thanks to Hillf Danton and Matthew Wilcox for their initial mm-layer analysis.

Published Jul 30, 2024 · Updated Aug 5, 2026

High · CVSS 7.8

CVE-2024-42103: btrfs: fix adding block group to a reclaim list and the unused list during reclaim

In the Linux kernel, the following vulnerability has been resolved: btrfs: fix adding block group to a reclaim list and the unused list during reclaim There is a potential parallel list adding for retrying in btrfs_reclaim_bgs_work and adding to the unused list. Since the block group is removed from the reclaim list and it is on a relocation work, it can be added into the unused list in parallel. When that happens, adding it to the reclaim list will corrupt the list head and trigger list corruption like below. Fix it by taking fs_info->unused_bgs_lock. [177.504][T2585409] BTRFS error (device nullb1): error relocating ch= unk 2415919104 [177.514][T2585409] list_del corruption. next->prev should be ff1100= 0344b119c0, but was ff11000377e87c70. (next=3Dff110002390cd9c0) [177.529][T2585409] ------------[ cut here ]------------ [177.537][T2585409] kernel BUG at lib/list_debug.c:65! [177.545][T2585409] Oops: invalid opcode: 0000 [#1] PREEMPT SMP KASAN NOPTI [177.555][T2585409] CPU: 9 PID: 2585409 Comm: kworker/u128:2 Tainted: G W 6.10.0-rc5-kts #1 [177.568][T2585409] Hardware name: Supermicro SYS-520P-WTR/X12SPW-TF, BIOS 1.2 02/14/2022 [177.579][T2585409] Workqueue: events_unbound btrfs_reclaim_bgs_work[btrfs] [177.589][T2585409] RIP: 0010:__list_del_entry_valid_or_report.cold+0x70/0x72 [177.624][T2585409] RSP: 0018:ff11000377e87a70 EFLAGS: 00010286 [177.633][T2585409] RAX: 000000000000006d RBX: ff11000344b119c0 RCX:0000000000000000 [177.644][T2585409] RDX: 000000000000006d RSI: 0000000000000008 RDI:ffe21c006efd0f40 [177.655][T2585409] RBP: ff110002e0509f78 R08: 0000000000000001 R09:ffe21c006efd0f08 [177.665][T2585409] R10: ff11000377e87847 R11: 0000000000000000 R12:ff110002390cd9c0 [177.676][T2585409] R13: ff11000344b119c0 R14: ff110002e0508000 R15:dffffc0000000000 [177.687][T2585409] FS: 0000000000000000(0000) GS:ff11000fec880000(0000) knlGS:0000000000000000 [177.700][T2585409] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [177.709][T2585409] CR2: 00007f06bc7b1978 CR3: 0000001021e86005 CR4:0000000000771ef0 [177.720][T2585409] DR0: 0000000000000000 DR1: 0000000000000000 DR2:0000000000000000 [177.731][T2585409] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7:0000000000000400 [177.742][T2585409] PKRU: 55555554 [177.748][T2585409] Call Trace: [177.753][T2585409] <TASK> [177.759][T2585409] ? __die_body.cold+0x19/0x27 [177.766][T2585409] ? die+0x2e/0x50 [177.772][T2585409] ? do_trap+0x1ea/0x2d0 [177.779][T2585409] ? __list_del_entry_valid_or_report.cold+0x70/0x72 [177.788][T2585409] ? do_error_trap+0xa3/0x160 [177.795][T2585409] ? __list_del_entry_valid_or_report.cold+0x70/0x72 [177.805][T2585409] ? handle_invalid_op+0x2c/0x40 [177.812][T2585409] ? __list_del_entry_valid_or_report.cold+0x70/0x72 [177.820][T2585409] ? exc_invalid_op+0x2d/0x40 [177.827][T2585409] ? asm_exc_invalid_op+0x1a/0x20 [177.834][T2585409] ? __list_del_entry_valid_or_report.cold+0x70/0x72 [177.843][T2585409] btrfs_delete_unused_bgs+0x3d9/0x14c0 [btrfs] There is a similar retry_list code in btrfs_delete_unused_bgs(), but it is safe, AFAICS. Since the block group was in the unused list, the used bytes should be 0 when it was added to the unused list. Then, it checks block_group->{used,reserved,pinned} are still 0 under the block_group->lock. So, they should be still eligible for the unused list, not the reclaim list. The reason it is safe there it's because because we're holding space_info->groups_sem in write mode. That means no other task can allocate from the block group, so while we are at deleted_unused_bgs() it's not possible for other tasks to allocate and deallocate extents from the block group, so it can't be added to the unused list or the reclaim list by anyone else. The bug can be reproduced by btrfs/166 after a few rounds. In practice this can be hit when relocation cannot find more chunk space and ends with ENOSPC.

Published Jul 30, 2024 · Updated Aug 5, 2026

High · CVSS 7.8

CVE-2024-42099: s390/dasd: Fix invalid dereferencing of indirect CCW data pointer

In the Linux kernel, the following vulnerability has been resolved: s390/dasd: Fix invalid dereferencing of indirect CCW data pointer Fix invalid dereferencing of indirect CCW data pointer in dasd_eckd_dump_sense() that leads to a kernel panic in error cases. When using indirect addressing for DASD CCWs (IDAW) the CCW CDA pointer does not contain the data address itself but a pointer to the IDAL. This needs to be translated from physical to virtual as well before using it. This dereferencing is also used for dasd_page_cache and also fixed although it is very unlikely that this code path ever gets used.

Published Jul 30, 2024 · Updated Aug 5, 2026

High · CVSS 7.8

CVE-2024-42097: ALSA: emux: improve patch ioctl data validation

In the Linux kernel, the following vulnerability has been resolved: ALSA: emux: improve patch ioctl data validation In load_data(), make the validation of and skipping over the main info block match that in load_guspatch(). In load_guspatch(), add checking that the specified patch length matches the actually supplied data, like load_data() already did.

Published Jul 29, 2024 · Updated Aug 5, 2026

High · CVSS 7.3

CVE-2024-42088: ASoC: mediatek: mt8195: Add platform entry for ETDM1_OUT_BE dai link

In the Linux kernel, the following vulnerability has been resolved: ASoC: mediatek: mt8195: Add platform entry for ETDM1_OUT_BE dai link Commit e70b8dd26711 ("ASoC: mediatek: mt8195: Remove afe-dai component and rework codec link") removed the codec entry for the ETDM1_OUT_BE dai link entirely instead of replacing it with COMP_EMPTY(). This worked by accident as the remaining COMP_EMPTY() platform entry became the codec entry, and the platform entry became completely empty, effectively the same as COMP_DUMMY() since snd_soc_fill_dummy_dai() doesn't do anything for platform entries. This causes a KASAN out-of-bounds warning in mtk_soundcard_common_probe() in sound/soc/mediatek/common/mtk-soundcard-driver.c: for_each_card_prelinks(card, i, dai_link) { if (adsp_node && !strncmp(dai_link->name, "AFE_SOF", strlen("AFE_SOF"))) dai_link->platforms->of_node = adsp_node; else if (!dai_link->platforms->name && !dai_link->platforms->of_node) dai_link->platforms->of_node = platform_node; } where the code expects the platforms array to have space for at least one entry. Add an COMP_EMPTY() entry so that dai_link->platforms has space.

Published Jul 29, 2024 · Updated Aug 5, 2026