Unknown · CVSS Not scored
In the Linux kernel, the following vulnerability has been resolved:
net: ftgmac100: fix ring allocation unwind on open failure
ftgmac100_alloc_rings() allocates rx_skbs, tx_skbs, rxdes, txdes, and
rx_scratch in stages. On intermediate failures it returned -ENOMEM
directly, leaking resources allocated earlier in the function.
Rework the failure path to use staged local unwind labels and free
allocated resources in reverse order before returning -ENOMEM. This
matches common netdev allocation cleanup style.
Published May 1, 2026 · Updated Jul 14, 2026
Critical · CVSS 9.3 · CISA KEV
A buffer overflow vulnerability in the User-ID™ Authentication Portal (aka Captive Portal) service of Palo Alto Networks PAN-OS software allows an unauthenticated attacker to execute arbitrary code with root privileges on the PA-Series and VM-Series firewalls by sending specially crafted packets.
The risk of this issue is greatly reduced if you secure access to the User-ID™ Authentication Portal per the best practice guidelines https://knowledgebase.paloaltonetworks.com/KCSArticleDetail by restricting access to only trusted internal IP addresses.
Prisma Access, Cloud NGFW and Panorama appliances are not impacted by this vulnerability.
Published May 6, 2026 · Updated Jul 14, 2026
High · CVSS 7.2
An authentication bypass vulnerability in Palo Alto Networks PAN-OS® software enables an unauthenticated attacker with network access to bypass authentication controls when Cloud Authentication Service (CAS) is enabled.
The risk is higher if CAS is enabled on the management interface and lower when any other login interfaces are used.
The risk of this issue is greatly reduced if you secure access to the management web interface by restricting access to only trusted internal IP addresses according to our recommended best practice deployment guidelines https://live.paloaltonetworks.com/t5/community-blogs/tips-amp-tricks-how-to-secure-the-management-access-of-your-palo/ba-p/464431 .
This issue is applicable to PAN-OS software on PA-Series and VM-Series firewalls and on Panorama (virtual and M-Series).
Cloud NGFW and Prisma Access® are not impacted by this vulnerability.
Published May 13, 2026 · Updated Jul 14, 2026
High · CVSS 7.2
A buffer overflow vulnerability in the DNS proxy and DNS Server features of Palo Alto Networks PAN-OS® Software allows an unauthenticated attacker with network access to cause a denial of service (DoS) condition (all PAN-OS platforms except Cloud NGFW and Prisma Access) or potentially execute arbitrary code by sending specially crafted network traffic (PA-Series hardware only).
Panorama, Cloud NGFW, and Prisma® Access are not impacted by this vulnerability.
Published May 13, 2026 · Updated Jul 14, 2026
Medium · CVSS 6.6
Multiple denial of service vulnerabilities in Palo Alto Networks PAN-OS® software allow an unauthenticated attacker with network access to cause a denial of service (DoS) condition by sending specially crafted network traffic.
Panorama and Cloud NGFW are not impacted by these vulnerabilities.
Published May 13, 2026 · Updated Jul 14, 2026
Medium · CVSS 6.1
Multiple command injection vulnerabilities in Palo Alto Networks PAN-OS® software enable an authenticated administrator to bypass system restrictions and run arbitrary commands as a root user. To be able to exploit this issue, the user must have access to the PAN-OS CLI or Web UI.
The security risk posed by this issue is significantly minimized when CLI access is restricted to a limited group of administrators and by restricting access to the management web interface to only trusted internal IP addresses according to our recommended best practice deployment guidelines https://live.paloaltonetworks.com/t5/community-blogs/tips-amp-tricks-how-to-secure-the-management-access-of-your-palo/ba-p/464431 .
This issue is applicable to PAN-OS software on PA-Series and VM-Series firewalls and on Panorama (virtual and M-Series).
Cloud NGFW and Prisma Access® are not impacted by these vulnerabilities.
Published May 13, 2026 · Updated Jul 14, 2026
Medium · CVSS 4.8
A server-side request forgery (SSRF) vulnerability in the IKEv2 implementation of Palo Alto Networks PAN-OS® software allows an unauthenticated attacker to cause the firewall to send network requests to unintended destinations or cause a denial of service (DoS) condition.
Panorama, Cloud NGFW and Prisma® Access are not impacted by these vulnerabilities.
Published May 13, 2026 · Updated Jul 14, 2026
High · CVSS 7.8 · CISA KEV
Authentication bypass vulnerabilities in the GlobalProtect portal and gateway of Palo Alto Networks PAN-OS® software allows the attacker to bypass security restrictions and establish an unauthorized VPN connection.
Panorama and Cloud NGFW are not impacted by these issues.
Published May 13, 2026 · Updated Jul 14, 2026
Medium · CVSS 4.4
A stored cross-site scripting (XSS) vulnerability in Palo Alto Networks PAN-OS® software enables a malicious authenticated administrator to store a JavaScript payload using the web interface.
This issue is applicable to PAN-OS software on PA-Series and VM-Series firewalls and on Panorama (virtual and M-Series).
Cloud NGFW and Prisma® Access are not impacted by this vulnerability.
Published May 13, 2026 · Updated Jul 14, 2026
High · CVSS 7.2
Affected devices do not properly validate and sanitize filenames on the Firmware Update page. This could allow a remote attacker to social engineer the user into selecting the modified firmware file to be uploaded. This would result in malitcious JavaScript execution in the context of the authenticated user's session without requiring the file to be uploaded, potentially leading to session hijacking or credential theft.
Published May 12, 2026 · Updated Jul 14, 2026
Critical · CVSS 9.3
Affected devices do not properly validate and sanitize Technology Object (TO) name rendered on the "Motion Control Diagnostics" page of the web interface. This could allow an authenticated attacker who is authorized to download a TIA project into the product, to inject malicious scripts into the page.
If a benign user with appropriate rights accesses the "Motion Control Diagnostics" parameters page, the malicious code would be executed in the scope of their web session.
Published May 12, 2026 · Updated Jul 14, 2026
Critical · CVSS 9.3
Affected devices do not properly validate and sanitize PLC/station name rendered on the "communication" parameters page of the web interface.
This could allow an authenticated attacker who is authorized to download a TIA project into the product, to inject malicious scripts into the page.
If a benign user with appropriate rights accesses the "communication" parameters page, the malicious code would be executed in the scope of their web session.
Published May 12, 2026 · Updated Jul 14, 2026
Critical · CVSS 9.1
A vulnerability has been identified in Mendix Runtime (All versions). Mendix documentation for access rules does not adequately describe the special behavior of the System.User entity, leaving developers without sufficient guidance to configure access rules securely. This documentation gap may lead application developers to unknowingly apply overly permissive access rules to System.User, resulting in unintended exposure of sensitive user data or privilege escalation within deployed Mendix applications.
Published May 7, 2026 · Updated Jul 14, 2026
High · CVSS 7.5
Micronaut Framework is a JVM-based full stack Java framework designed for building modular, easily testable JVM applications. From 4.3.0 to before 4.10.22, 3.10.6, and 3.8.14, TimeConverterRegistrar caches DateTimeFormatter instances in an unbounded ConcurrentHashMap<String, DateTimeFormatter> whose key is derived from the @Format annotation pattern concatenated with the locale from the HTTP Accept-Language header. Because Locale.forLanguageTag() accepts arbitrary BCP 47 private-use extensions (en-x-a001, en-x-a002, …), an unauthenticated attacker can generate an unlimited number of unique cache keys by sending requests with novel locale tags, growing the cache until heap memory is exhausted and the JVM crashes. This vulnerability is fixed in 4.10.22, 3.10.6, and 3.8.14.
Published May 12, 2026 · Updated Jul 10, 2026
Medium · CVSS 4
An improper neutralization of argument delimiters in a command ('argument injection') vulnerability in Fortinet FortiDeceptor 6.0.0 through 6.0.2, FortiDeceptor 5.3.0 through 5.3.3, FortiDeceptor 5.2.0 through 5.2.1, FortiDeceptor 5.1 all versions, FortiDeceptor 5.0 all versions may allow an authenticated attacker with at least read-only admin permission to read log files via HTTP crafted requests.
Published May 12, 2026 · Updated Jul 8, 2026
Critical · CVSS 9.1
A missing authorization vulnerability in Fortinet FortiSandbox 5.0.0 through 5.0.1, FortiSandbox 4.4.0 through 4.4.8, FortiSandbox Cloud 5.0.2 through 5.0.5, FortiSandbox PaaS 23.4 all versions, FortiSandbox PaaS 23.3 all versions, FortiSandbox PaaS 23.1 all versions, FortiSandbox PaaS 22.2 all versions, FortiSandbox PaaS 22.1 all versions, FortiSandbox PaaS 21.4 all versions, FortiSandbox PaaS 21.3 all versions, FortiSandbox PaaS 5.0.0 through 5.0.1, FortiSandbox PaaS 4.4.5 through 4.4.8 may allow an unauthenticated attacker to execute unauthorized code or commands via HTTP requests.
Published May 12, 2026 · Updated Jul 8, 2026
Medium · CVSS 5.1
An improper neutralization of special elements used in an sql command ('sql injection') vulnerability in Fortinet FortiNDR 7.6.0 through 7.6.2, FortiNDR 7.4.0 through 7.4.9, FortiNDR 7.2 all versions, FortiNDR 7.1 all versions, FortiNDR 7.0 all versions may allow an authenticated attacker to execute unauthorized code or commands via specifically crafted HTTP requests.
Published May 12, 2026 · Updated Jul 8, 2026
High · CVSS 8.7
Versions of the package pacote from 11.2.7 and before 21.5.1 are vulnerable to Denial of Service (DoS) via the addGitSha function. An attacker can exploit this vulnerability by supplying a specially crafted spec.rawSpec value that triggers the function’s regex replacement and string-manipulation logic, causing excessive CPU consumption and potentially stalling or crashing the process.
Published May 26, 2026 · Updated Jul 7, 2026
Medium · CVSS 6
Incorrect authorization in the "submitted together" feature in Gerrit versions 2.12 and later allows an authenticated attacker with force push permissions on a secondary branch to bypass code review and forcefully submit code to restricted branches via a crafted submission matching the "topic" tag of an unapproved change.
Published May 13, 2026 · Updated Jul 6, 2026
Critical · CVSS 9.1
The GoAhead web server on MeiG Smart FORGE_SLT711 devices (firmware MDM9607.LE.1.0-00110-STD.PROD-1) allows unauthenticated OS command injection via the /action/SetRemoteAccessCfg endpoint.
Published May 5, 2026 · Updated Jul 5, 2026
Medium · CVSS 4.3
PbootCMS v.3.2.11 contains a code injection vulnerability in its site configuration functionality
Published May 26, 2026 · Updated Jul 5, 2026
Medium · CVSS 5.4
A stored cross-site scripting (XSS) vulnerability in the /admin/config-module.php component of creatorsofcode simplephp GitHub commit 5184cff (Latest as of 2026-02-27) via injecting a crafted payload.
Published May 27, 2026 · Updated Jul 5, 2026
Medium · CVSS 6.5
OpenRapid RapidCMS v1.3.1 was discovered to contain an authentication bypass in the /template/default/menu.php component. This vulnerability is exploited via injecting a crafted SQL payload into the name cookie parameter.
Published May 27, 2026 · Updated Jul 5, 2026
Medium · CVSS 6.5
A path injection vulnerability exists in OpenPLC v3 (2c82b0e79c53f8c1f1458eee15fec173400d6e1a) as the binary program compiled from glue_generator.cpp does not perform any validation on the file path parameters passed via the command line. The user-controlled input parameters are directly passed to the underlying file operation functions (fopen/ifstream/ofstream) for file reading and writing. An attacker can exploit this vulnerability by constructing a malicious path to read arbitrary readable files.
Published May 13, 2026 · Updated Jul 5, 2026
Medium · CVSS 6.1
Cross Site Scripting vulnerability in iotgateway v.3.0.1 allows a remote attacker to execute arbitrary code via the Log Record Function
Published May 11, 2026 · Updated Jul 5, 2026
High · CVSS 8.8
EDIMAX BR-6428nS V3 1.15 is vulnerable to Command Injection. An authenticated attacker with access to the network can submit crafted input to the WLAN configuration functionality. Due to insufficient input validation, the attacker is able to execute arbitrary system commands on the device.
Published May 11, 2026 · Updated Jul 5, 2026
High · CVSS 7.3
Netis AC1200 Router NC21 V4.0.1.4296 is vulnerable to unauthenticated command injection via the /cgi-bin/skk_set.cgi endpoint. The password and new_pwd_confirm POST parameters are passed directly to the underlying OS shell without sanitization. An attacker can inject arbitrary shell commands by wrapping them in backticks (`) and encoding them in base64. Because the endpoint requires no authentication, any device on the LAN can achieve full Remote Code Execution on the router's operating system with a single HTTP POST request.
Published May 27, 2026 · Updated Jul 5, 2026
High · CVSS 7.3
Netis AC1200 Router NC21 V4.0.1.4296 contains a hard-coded root credential stored in /etc/shadow.sample. The password for the root account is set to the trivially weak value root, allowing an attacker with access to the device to authenticate as root and gain full control of the underlying operating system.
Published May 27, 2026 · Updated Jul 5, 2026
Medium · CVSS 5.4
A Cross-Site Scripting (XSS) vulnerability was found in PHPGurukal Hospital Management System v4.0 in the /hospital/hms/edit-profile.php page. This flaw allows an authenticated attacker (patient) to inject a malicious script payload into the User Name parameter, which is stored in the application and later rendered in the doctor s interface.
Published May 7, 2026 · Updated Jul 5, 2026
Medium · CVSS 6.5
A Remote Code Execution vulnerability was found in CODEASTRO Membership Management System v1.0 in /add_members.php. This vulnerability affects the file upload functionality, where improper file sanitization allows attackers to inject malicious files which leads RCE.
Published May 7, 2026 · Updated Jul 5, 2026
Medium · CVSS 5.4
Cross Site Scripting vulnerability in Juzaweb CMS v.5.0.0 allows a remote attacker via execute arbitrary code via a crafted script to the Add Banner Ads function
Published May 6, 2026 · Updated Jul 5, 2026
High · CVSS 7.7
The rtl8192cd Wi-Fi kernel driver in the Realtek rtl819x Jungle SDK (all known versions through v3.4.14B) does not perform any access control checks on the write_mem (ioctl 0x89F5) and read_mem (ioctl 0x89F6) debug handlers, which are compiled into production builds via the unconditionally defined _IOCTL_DEBUG_CMD_ macro in 8192cd_cfg.h
Published May 5, 2026 · Updated Jul 5, 2026
High · CVSS 7.3
Buffer Overflow vulnerability in Easy Chat Server 3.1 allows a remote attacker to obtain sensitive information and execute arbitrary code via the chat message functionality
Published May 22, 2026 · Updated Jul 5, 2026
Medium · CVSS 6.5
Directory Traversal vulnerability in Easy Chat Server 3.1 allows a remote attacker to obtain sensitive information and execute arbitrary code via the UserName parameter
Published May 22, 2026 · Updated Jul 5, 2026
High · CVSS 7.3
An issue in ClipBucket v5 v.5.5.2 allows an attacker to execute arbitrary code via the Authentication interface, login page endpoint and HTTP response security headers components
Published May 22, 2026 · Updated Jul 5, 2026
Unknown · CVSS Not scored
In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: btmtk: validate WMT event SKB length before struct access
btmtk_usb_hci_wmt_sync() casts the WMT event response SKB data to
struct btmtk_hci_wmt_evt (7 bytes) and struct btmtk_hci_wmt_evt_funcc
(9 bytes) without first checking that the SKB contains enough data.
A short firmware response causes out-of-bounds reads from SKB tailroom.
Use skb_pull_data() to validate and advance past the base WMT event
header. For the FUNC_CTRL case, pull the additional status field bytes
before accessing them.
Published May 28, 2026 · Updated Jul 4, 2026
Unknown · CVSS Not scored
In the Linux kernel, the following vulnerability has been resolved:
iio: light: bh1780: fix PM runtime leak on error path
Move pm_runtime_put_autosuspend() before the error check to ensure
the PM runtime reference count is always decremented after
pm_runtime_get_sync(), regardless of whether the read operation
succeeds or fails.
Published May 8, 2026 · Updated Jul 4, 2026
Unknown · CVSS Not scored
In the Linux kernel, the following vulnerability has been resolved:
net: cpsw_new: Fix potential unregister of netdev that has not been registered yet
If an error occurs during register_netdev() for the first MAC in
cpsw_register_ports(), even though cpsw->slaves[0].ndev is set to NULL,
cpsw->slaves[1].ndev would remain unchanged. This could later cause
cpsw_unregister_ports() to attempt unregistering the second MAC.
To address this, add a check for ndev->reg_state before calling
unregister_netdev(). With this change, setting cpsw->slaves[i].ndev
to NULL becomes unnecessary and can be removed accordingly.
Published May 6, 2026 · Updated Jul 4, 2026
Unknown · CVSS Not scored
In the Linux kernel, the following vulnerability has been resolved:
bpf: Reject sleepable kprobe_multi programs at attach time
kprobe.multi programs run in atomic/RCU context and cannot sleep.
However, bpf_kprobe_multi_link_attach() did not validate whether the
program being attached had the sleepable flag set, allowing sleepable
helpers such as bpf_copy_from_user() to be invoked from a non-sleepable
context.
This causes a "sleeping function called from invalid context" splat:
BUG: sleeping function called from invalid context at ./include/linux/uaccess.h:169
in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 1787, name: sudo
preempt_count: 1, expected: 0
RCU nest depth: 2, expected: 0
Fix this by rejecting sleepable programs early in
bpf_kprobe_multi_link_attach(), before any further processing.
Published May 1, 2026 · Updated Jul 4, 2026
Unknown · CVSS Not scored
In the Linux kernel, the following vulnerability has been resolved:
usb: cdns3: gadget: fix NULL pointer dereference in ep_queue
When the gadget endpoint is disabled or not yet configured, the ep->desc
pointer can be NULL. This leads to a NULL pointer dereference when
__cdns3_gadget_ep_queue() is called, causing a kernel crash.
Add a check to return -ESHUTDOWN if ep->desc is NULL, which is the
standard return code for unconfigured endpoints.
This prevents potential crashes when ep_queue is called on endpoints
that are not ready.
Published May 1, 2026 · Updated Jul 4, 2026
Unknown · CVSS Not scored
In the Linux kernel, the following vulnerability has been resolved:
gpio: Fix resource leaks on errors in gpiochip_add_data_with_key()
Since commit aab5c6f20023 ("gpio: set device type for GPIO chips"),
`gdev->dev.release` is unset. As a result, the reference count to
`gdev->dev` isn't dropped on the error handling paths.
Drop the reference on errors.
Also reorder the instructions to make the error handling simpler.
Now gpiochip_add_data_with_key() roughly looks like:
>>> Some memory allocation. Go to ERR ZONE 1 on errors.
>>> device_initialize().
gpiodev_release() takes over the responsibility for freeing the
resources of `gdev->dev`. The subsequent error handling paths
shouldn't go through ERR ZONE 1 again which leads to double free.
>>> Some initialization mainly on `gdev`.
>>> The rest of initialization. Go to ERR ZONE 2 on errors.
>>> Chip registration success and exit.
>>> ERR ZONE 2. gpio_device_put() and exit.
>>> ERR ZONE 1.
Published May 1, 2026 · Updated Jul 4, 2026
Medium · CVSS 6.5
A flaw was found in Samba’s vfs_worm module. The module is intended to provide write-once, read-many (WORM) protections by preventing modification of files after a configurable grace period. Due to insufficient validation during rename operations, an authenticated user with write access to a share could overwrite a protected file by renaming a newly created file over the existing WORM-protected file.
Published May 27, 2026 · Updated Jul 2, 2026
Medium · CVSS 6.3
ACM/MCE assisted-service writes raw referenced pull-secret contents into `InfraEnv.status.conditions[].message` when pull-secret validation fails. A namespace principal with the stock `view` ClusterRole cannot directly read Secrets, but can read `InfraEnv` objects and recover the referenced Secret's `.dockerconfigjson` data from status.
This bypasses the Kubernetes/OpenShift RBAC separation between read-only namespace viewers and Secret readers. In the reproduced proof, the same ServiceAccount was denied `get` and `list` on Secrets, but recovered synthetic pull-secret `username`, `password`, `email`, and base64 `auth` fields through `InfraEnv.status`.
Published May 29, 2026 · Updated Jul 2, 2026
Medium · CVSS 5.3
An authenticated attacker's undisclosed requests to BIG-IP iControl REST can lead to an information leak of BIG-IP local user account names. Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated.
Published May 13, 2026 · Updated Jul 2, 2026
High · CVSS 8.7
Snipe-IT is an IT asset/license management system. Prior to 8.4.1, aAn authenticated user with only users.edit permission can escalate their own privileges to admin by sending a PATCH request to /api/v1/users/{id} with permissions[admin]=1. The API controller only strips the superuser key from the permissions array, allowing admin and all other permission keys to be set by any user who can update users. This vulnerability is fixed in 8.4.1.
Published May 26, 2026 · Updated Jul 2, 2026
Medium · CVSS 5.3
Mermaid is a JavaScript tool that uses Markdown-inspired text to create and modify diagrams and charts. Prior to 10.9.6 and 11.15.0, Mermaid's default configuration allows injecting CSS that applies outside of the Mermaid diagram via the fontFamily, themeCSS, and altFontFamily configuration options. The injected CSS exploits stylis's & (scope reference) handling. :not(&) escapes the #mermaid-xxx automatic scoping, applying styles to all page elements. Global at-rules (@font-face, @keyframes, @counter-style) are also injectable as stylis hoists them to top level. This allows page defacement and DOM attribute exfiltration via CSS :has() selectors. This vulnerability is fixed in 10.9.6 and 11.15.0.
Published May 29, 2026 · Updated Jul 1, 2026
Critical · CVSS 9.2
A server-side request forgery (SSRF) vulnerability was identified in GitHub Enterprise Server that allowed an unauthenticated attacker to send crafted requests to internal services by exploiting insufficient input validation in an upload endpoint. By injecting path traversal content into request parameters, an attacker could bypass the intended request flow and redirect internal API calls, potentially accessing internal services and exposing sensitive credentials. This vulnerability affected all versions of GitHub Enterprise Server prior to 3.22 and was fixed in versions 3.17.17, 3.18.11, 3.19.8, 3.20.4, and 3.21.2. This vulnerability was reported via the GitHub Bug Bounty program.
Published May 27, 2026 · Updated Jun 30, 2026
Critical · CVSS 9.6
A critical Remote Code Execution (RCE) vulnerability was identified in the server-side template rendering mechanism used by the Glassfish gadget handler. The application processes .xml files and evaluates user-supplied values within a context where Expression Language (EL) “expressions” are processed without proper sanitization or escaping. By injecting expressions such as #{7*7}, the server returns 49, confirming server-side EL evaluation. This issue allows a remote attacker to fully compromise the underlying host, enabling capabilities as reading/modifying data, executing arbitrary commands, persistence, and lateral movement. This issue affects Eclipse GlassFish: from 8.0.0 to 8.0.1, fixed in 8.0.2; 7.1.0, fixed in 7.1.1; from 7.0.0 to 7.0.25, fixed in 7.0.26. Impact on versions from 5.1.0 to 6.2.5 is unknown.
Published May 19, 2026 · Updated Jun 29, 2026
Critical · CVSS 9.1
An authenticated Remote Code Execution (RCE) vulnerability was identified in GlassFish's Administration Console. A user with access to the panel can send crafted requests that allow the execution of arbitrary operating system commands with the privileges of the application service user. This issue affects Eclipse GlassFish: from 8.0.0 to 8.0.1, fixed in 8.0.2; 7.1.0, fixed in 7.1.1; from 7.0.0 to 7.0.25, fixed in 7.0.26. Impact on versions from 5.1.0 to 6.2.5 is unknown.
Published May 19, 2026 · Updated Jun 29, 2026
Low · CVSS 2.4
Incorrect behavior order in the Infotainment / Digital Round display of the Indian Motorcycle Scout Bobber + Tech 2025 model year allows an adjacent-network attacker to bypass the PIN entry screen. The Infotainment uses presence of Wireless Control Module (WCM) traffic during its boot window as a proxy for whether an immobilizer is fitted; if no WCM messages are observed, it skips the PIN entry screen and shows the normal user interface. An attacker who silences the WCM during the boot window — for example via a separately tracked CAN bus-off technique — can present a fully unlocked Infotainment despite the PIN never being entered. Specific timing and protocol details have been withheld pending vendor remediation.
Published May 29, 2026 · Updated Jun 27, 2026
