LiveActive security incident?Get immediate response
CVE archive

Critical CVE Archive

Browse critical-severity CVEs with CVSS, affected products, CWE, KEV, remediation priorities, and source-backed Glexia context.

Search all CVEsKnown exploited

Showing 50 of 24996 matching CVEs · Page 80 of 500.

Critical · CVSS 9.9

CVE-2026-82593: D-Link DIR-825M LTE Module Firmware Upgrade formLtefotaUpgradeFibocom sub_41802C stack-based overflow

A flaw has been found in D-Link DIR-825M 1.1.8. This impacts the function sub_41802C of the file /boafrm/formLtefotaUpgradeFibocom of the component LTE Module Firmware Upgrade. This manipulation of the argument fota_url causes stack-based buffer overflow. The attack is possible to be carried out remotely. The exploit has been published and may be used.

Published Aug 30, 2026 · Updated Sep 1, 2026

Critical · CVSS 9.3

CVE-2026-82654: SiYuan before v3.8.1 Stored XSS via block name

SiYuan before v3.8.1 fails to properly escape block name, alias, and memo fields in hint, backlink, and breadcrumb rendering functions. Attackers can set a block's name to contain HTML/script tags that execute when another user views documents referencing or displaying that block.

Published Aug 30, 2026 · Updated Sep 1, 2026

Critical · CVSS 10

CVE-2026-82542: Tenda HG10 Boa Web Server formIPv6Routing buffer overflow

A weakness has been identified in Tenda HG10 300001138. Affected by this issue is the function formIPv6Routing of the file /boaform/admin/formIPv6Routing of the component Boa Web Server. This manipulation of the argument destNet causes buffer overflow. The attack is possible to be carried out remotely. The exploit has been made available to the public and could be used for attacks.

Published Aug 30, 2026 · Updated Sep 1, 2026

Critical · CVSS 9.3

CVE-2026-82908: MSI Dragon Center MMIO Write Path NTIOLib_X64.sys MmioWritePath integer overflow

A vulnerability was found in MSI Dragon Center up to 2.0.155.0. Affected by this vulnerability is the function MmioWritePath in the library NTIOLib_X64.sys of the component MMIO Write Path Handler. Performing a manipulation of the argument count/elementSize results in integer overflow. The attack requires a local approach. The exploit has been made public and could be used. The vendor was contacted early about this disclosure but did not respond in any way.

Published Aug 31, 2026 · Updated Sep 1, 2026

Critical · CVSS 9.1

CVE-2026-51152: Server-side request forgery (SSRF) in the /har/test endpoint in QD 20220208 through 20250803.

Server-side request forgery (SSRF) in the /har/test endpoint in QD 20220208 through 20250803. Fetcher.build_request() in libs/fetcher.py constructs an httpclient.HTTPRequest from user-supplied JSON without validating URL scheme, host, or IP range. The /har/test handler does not require authentication, enabling unauthenticated remote attackers to force the QD server to send arbitrary HTTP requests to internal network resources and cloud metadata endpoints. validate_cert is set to False, disabling TLS verification.

Published Aug 31, 2026 · Updated Sep 1, 2026

Critical · CVSS 9

CVE-2026-67394: A critical local privilege escalation via OS command injection vulnerability has been discovered in Plesk f...

A critical local privilege escalation via OS command injection vulnerability has been discovered in Plesk for Linux, affecting all versions from 18.0.34 before 18.0.79.9 and 18.0.80.5. The vulnerability allows a customer or reseller with shell access (or allowed to change their own shell access) to elevate privileges to the root account on the hosting server.

Published Sep 1, 2026 · Updated Sep 1, 2026

Critical · CVSS 9.4

CVE-2026-4813: Code injection in the Lutece Core

A vulnerability in the Lutece Core XSL export management module up to version 7.1.7, which allows authenticated administrators to execute code remotely. The XML/XSLT processing configuration does not enable secure processing mode (FEATURE_SECURE_PROCESSING), allowing Java extension functions to be executed from malicious XSL stylesheets. An attacker with administrator privileges can upload a manipulated XSL transformation file and trigger its execution during user export operations, resulting in the execution of arbitrary code on the server.

Published Sep 1, 2026 · Updated Sep 1, 2026

Critical · CVSS 9.1

CVE-2026-33278: Possible arbitrary code execution during DNSSEC validation

NLnet Labs Unbound 1.19.1 up to and including version 1.25.0 has a vulnerability in the DNSSEC validator that enables denial of service and possible remote code execution as a result of deep copying a data structure and erroneously overwriting a destination pointer. An adversary can exploit the vulnerability by controlling a malicious signed zone and querying a vulnerable Unbound. When DS sub-queries need to suspend validation due to NSEC3 computational budget exhaustion (introduced in Unbound 1.19.1), Unbound deep-copies response messages to preserve them across memory region teardown. A struct-assignment bug overwrites the destination's pointer with the source's pointer. After the sub-query region is freed, the resumed validator dereferences this dangling pointer, triggering a crash or potentially enabling arbitrary code execution. Unbound 1.25.1 contains a patch with a fix to preserve the correct pointer when deep copying the data structure.

Published May 20, 2026 · Updated Sep 1, 2026

Critical · CVSS 9.8

CVE-2026-53175: inet: frags: fix use-after-free caused by the fqdir_pre_exit() flush

In the Linux kernel, the following vulnerability has been resolved: inet: frags: fix use-after-free caused by the fqdir_pre_exit() flush On netns teardown, fqdir_pre_exit() walks the fqdir rhashtable and flushes every fragment queue that is not yet complete using inet_frag_queue_flush(). That helper frees all the skbs queued on the fragment queue but does not set INET_FRAG_COMPLETE, and leaves q->fragments_tail and q->last_run_head pointing at the freed skbs. The queue itself stays in the rhashtable. fqdir_pre_exit() first lowers high_thresh to 0 to stop new queue lookups, but it cannot stop a fragment that already obtained the queue through inet_frag_find() earlier and stalled just before taking the queue lock. Once that fragment resumes after the flush and takes the queue lock, it passes the INET_FRAG_COMPLETE check and then dereferences the freed fragments_tail. inet_frag_queue_insert() reads FRAG_CB() and ->len of that pointer and, on the append path, writes ->next_frag, causing a slab use-after-free. IPv6, nf_conntrack_reasm6 and 6lowpan reassembly share the same flush path and are affected as well. Reset rb_fragments, fragments_tail and last_run_head in inet_frag_queue_flush() so a flushed queue no longer points at the freed skbs. A fragment that resumes after the flush and takes the queue lock then finds an empty queue and starts a new run instead of dereferencing the freed fragments_tail. ip_frag_reinit() already performed this reset after its own flush, so drop the now duplicate code there.

Published Jun 25, 2026 · Updated Sep 1, 2026

Critical · CVSS 9

CVE-2026-4480: Samba: samba: remote code execution in printing subsystem via unescaped job description

A flaw was found in the Samba printing subsystem. Samba passes the client-controlled job description string to the command configured with the "print command" setting via the "%J" substitution character without escaping shell meta characters. A remote attacker could exploit this vulnerability by sending a specially crafted print job description that contains unescaped shell characters. This could lead to remote code execution on the affected system.

Published May 26, 2026 · Updated Sep 1, 2026

Critical · CVSS 9.1

CVE-2026-7598: libssh2 userauth.c userauth_password integer overflow

A security vulnerability has been detected in libssh2 up to 1.11.1. The impacted element is the function userauth_password of the file src/userauth.c. Such manipulation of the argument username_len/password_len leads to integer overflow. The attack may be launched remotely. The name of the patch is 256d04b60d80bf1190e96b0ad1e91b2174d744b1. A patch should be applied to remediate this issue.

Published May 1, 2026 · Updated Sep 1, 2026

Critical · CVSS 9.9

CVE-2026-19295: Langflow is affected by multiple remote code execution vulnerabilities due to insufficient code-execution policy enforcement

IBM Langflow OSS 1.0.0 through 1.11.1 allows an authenticated attacker to execute arbitrary operating system commands in the server process by saving a flow with a crafted type field value and triggering a build of a wrapper flow that references it. This allowed privilege escalation from "authenticated flow user" to arbitrary OS-level command execution under the server process identity, bypassing the LANGFLOW_ALLOW_CUSTOM_COMPONENTS=false policy control.

Published Aug 28, 2026 · Updated Sep 1, 2026

Critical · CVSS 9.8

CVE-2026-15369: Custom User Registration Fields for WooCommerce <= 2.2.3 - Unauthenticated Privilege Escalation via 'afreg_select_user_role' Parameter in Store API Checkout

The Custom User Registration Fields for WooCommerce plugin for WordPress is vulnerable to Privilege Escalation in versions up to, and including, 2.2.3. This is due to the plugin accepting an attacker-controlled afreg_select_user_role value from the unauthenticated WooCommerce Store API /wc/store/v1/checkout request in the af_reg_checkout_data_to_order_meta_data_block() function, persisting it in order meta, and then passing it directly to WP_User::add_role() in the af_reg_custom_order_processing_function() function (hooked to woocommerce_thankyou) without validating against the plugin's admin-configured allowed role list. This makes it possible for unauthenticated attackers to elevate their privileges to Administrator by creating an account during checkout with a modified JSON body specifying administrator (or any other role slug) as the desired role. Note: The exploit requires the "User Role Selection" setting to be enabled.

Published Aug 29, 2026 · Updated Sep 1, 2026

Critical · CVSS 9.3

CVE-2026-55378: JS Recon: Command injection in PR Branch Checker workflow via untrusted pull request context values

JS Recon is a JavaScript enumeration and SAST tool. From 1.2.1-beta.1 until 1.3.1-beta.2, the PR Branch Checker workflow in .github/workflows/pr_checker.yml places github.head_ref and github.event.pull_request.head.repo.full_name into BRANCH_NAME and SOURCE_REPO and interpolates those untrusted values into a shell gh pr comment command. A remote user who opens a pull request can use shell metacharacters in a branch or fork name to execute commands in the GitHub Actions runner with the workflow's GITHUB_TOKEN, which has pull-requests write permission. This issue is fixed in version 1.3.1-beta.2.

Published Aug 28, 2026 · Updated Sep 1, 2026