LiveActive security incident?Get immediate response
CVE archive

2026 CVE Archive

Browse CVE records published in 2026 CVE Archive, with severity, affected products, CWE, KEV, and source-backed vulnerability context.

Showing 50 of 72192 matching CVEs · Page 8 of 1444.

Unknown · CVSS Not scored

CVE-2026-43035: net: sched: cls_api: fix tc_chain_fill_node to initialize tcm_info to zero to prevent an info-leak

In the Linux kernel, the following vulnerability has been resolved: net: sched: cls_api: fix tc_chain_fill_node to initialize tcm_info to zero to prevent an info-leak When building netlink messages, tc_chain_fill_node() never initializes the tcm_info field of struct tcmsg. Since the allocation is not zeroed, kernel heap memory is leaked to userspace through this 4-byte field. The fix simply zeroes tcm_info alongside the other fields that are already initialized.

Published May 1, 2026 · Updated Oct 15, 2026

Unknown · CVSS Not scored

CVE-2026-43027: netfilter: nf_conntrack_helper: pass helper to expect cleanup

In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_conntrack_helper: pass helper to expect cleanup nf_conntrack_helper_unregister() calls nf_ct_expect_iterate_destroy() to remove expectations belonging to the helper being unregistered. However, it passes NULL instead of the helper pointer as the data argument, so expect_iter_me() never matches any expectation and all of them survive the cleanup. After unregister returns, nfnl_cthelper_del() frees the helper object immediately. Subsequent expectation dumps or packet-driven init_conntrack() calls then dereference the freed exp->helper, causing a use-after-free. Pass the actual helper pointer so expectations referencing it are properly destroyed before the helper object is freed. BUG: KASAN: slab-use-after-free in string+0x38f/0x430 Read of size 1 at addr ffff888003b14d20 by task poc/103 Call Trace: string+0x38f/0x430 vsnprintf+0x3cc/0x1170 seq_printf+0x17a/0x240 exp_seq_show+0x2e5/0x560 seq_read_iter+0x419/0x1280 proc_reg_read+0x1ac/0x270 vfs_read+0x179/0x930 ksys_read+0xef/0x1c0 Freed by task 103: The buggy address is located 32 bytes inside of freed 192-byte region [ffff888003b14d00, ffff888003b14dc0)

Published May 1, 2026 · Updated Oct 15, 2026

Unknown · CVSS Not scored

CVE-2026-43026: netfilter: ctnetlink: zero expect NAT fields when CTA_EXPECT_NAT absent

In the Linux kernel, the following vulnerability has been resolved: netfilter: ctnetlink: zero expect NAT fields when CTA_EXPECT_NAT absent ctnetlink_alloc_expect() allocates expectations from a non-zeroing slab cache via nf_ct_expect_alloc(). When CTA_EXPECT_NAT is not present in the netlink message, saved_addr and saved_proto are never initialized. Stale data from a previous slab occupant can then be dumped to userspace by ctnetlink_exp_dump_expect(), which checks these fields to decide whether to emit CTA_EXPECT_NAT. The safe sibling nf_ct_expect_init(), used by the packet path, explicitly zeroes these fields. Zero saved_addr, saved_proto and dir in the else branch, guarded by IS_ENABLED(CONFIG_NF_NAT) since these fields only exist when NAT is enabled. Confirmed by priming the expect slab with NAT-bearing expectations, freeing them, creating a new expectation without CTA_EXPECT_NAT, and observing that the ctnetlink dump emits a spurious CTA_EXPECT_NAT containing stale data from the prior allocation.

Published May 1, 2026 · Updated Oct 15, 2026

Unknown · CVSS Not scored

CVE-2026-43024: netfilter: nf_tables: reject immediate NF_QUEUE verdict

In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_tables: reject immediate NF_QUEUE verdict nft_queue is always used from userspace nftables to deliver the NF_QUEUE verdict. Immediately emitting an NF_QUEUE verdict is never used by the userspace nft tools, so reject immediate NF_QUEUE verdicts. The arp family does not provide queue support, but such an immediate verdict is still reachable. Globally reject NF_QUEUE immediate verdicts to address this issue.

Published May 1, 2026 · Updated Oct 15, 2026

Medium · CVSS 5.1

CVE-2026-33920: Cross-site request forgery in the Guardian/CMC login before 26.3.0

A cross-site request forgery vulnerability was discovered in the login functionality (both standard and SAML) due to missing validation of the anti-CSRF token. An attacker with a valid account can trick a victim into unknowingly authenticating with the attacker's credentials. Any operation performed by the victim in this state is attributed to the attacker's account, compromising the integrity of the audit trail.

Published Sep 8, 2026 · Updated Oct 15, 2026

Medium · CVSS 5.4

CVE-2026-33391: Incorrect authorization in Smart Polling configuration in Guardian/CMC before 26.3.0

An access control vulnerability was discovered in the Smart Polling configuration functionality due to insufficient validation of user privileges. An authenticated user with limited privileges can remotely bypass the intended access control of the web management interface and modify the Smart Polling discovery configuration. This allows the attacker to disrupt the visibility of assets in the monitored network.

Published Sep 8, 2026 · Updated Oct 15, 2026

High · CVSS 7.5

CVE-2026-33389: Disabled and non-configurable certificate/host key validation in Smart Polling in Guardian/CMC before 26.3.0 and Arc before v2.7.0

An improper certificate/host key validation vulnerability was discovered in the Smart Polling functionality, which established encrypted connections to target devices without validating the remote host's identity, and no option was provided to enable it. A man-in-the-middle attacker positioned between a sensor and a polled device can, during a polling session, impersonate the device and intercept the communication, including the credentials used to access it. The captured credentials can then be replayed to authenticate against the device itself or against other devices sharing the same credentials, allowing the attacker to access and tamper with the device's data and to disrupt its operations.

Published Sep 8, 2026 · Updated Oct 15, 2026

High · CVSS 7.4

CVE-2026-33388: Incorrect authorization in Credentials Manager in Guardian/CMC before 26.3.0

An access control vulnerability was discovered in the Credentials Manager functionality due to insufficient validation of user privileges. A remote authenticated user with limited privileges can view a limited subset of the available entries in the Credentials Manager. The actual credential values are not directly visible, but the user can delete entries or edit their properties. An attacker who deletes or edits an entry can disrupt authentication for dependent devices, and one who manipulates an entry's configuration may be able to indirectly obtain the credentials.

Published Sep 8, 2026 · Updated Oct 15, 2026

Medium · CVSS 5.1

CVE-2026-33387: Insufficient sanitization of Dashboards in Guardian/CMC before 26.3.0

A template injection vulnerability was discovered in the Dashboards functionality due to improper validation of an input parameter. An authenticated user with the required privileges can define a dashboard containing a malicious payload, or a victim can be socially engineered into importing a malicious dashboard. When the victim views or imports the dashboard, the payload executes in their browser context, allowing the attacker to modify application data or disrupt application availability.

Published Sep 8, 2026 · Updated Oct 15, 2026

High · CVSS 7.8

CVE-2026-31768: iio: adc: ti-adc161s626: use DMA-safe memory for spi_read()

In the Linux kernel, the following vulnerability has been resolved: iio: adc: ti-adc161s626: use DMA-safe memory for spi_read() Add a DMA-safe buffer and use it for spi_read() instead of a stack memory. All SPI buffers must be DMA-safe. Since we only need up to 3 bytes, we just use a u8[] instead of __be16 and __be32 and change the conversion functions appropriately.

Published May 1, 2026 · Updated Oct 15, 2026

High · CVSS 7.8

CVE-2026-31761: iio: gyro: mpu3050: Move iio_device_register() to correct location

In the Linux kernel, the following vulnerability has been resolved: iio: gyro: mpu3050: Move iio_device_register() to correct location iio_device_register() should be at the end of the probe function to prevent race conditions. Place iio_device_register() at the end of the probe function and place iio_device_unregister() accordingly.

Published May 1, 2026 · Updated Oct 15, 2026

Unknown · CVSS Not scored

CVE-2026-31752: bridge: br_nd_send: validate ND option lengths

In the Linux kernel, the following vulnerability has been resolved: bridge: br_nd_send: validate ND option lengths br_nd_send() walks ND options according to option-provided lengths. A malformed option can make the parser advance beyond the computed option span or use a too-short source LLADDR option payload. Validate option lengths against the remaining NS option area before advancing, and only read source LLADDR when the option is large enough for an Ethernet address.

Published May 1, 2026 · Updated Oct 15, 2026

Unknown · CVSS Not scored

CVE-2026-31737: net: ftgmac100: fix ring allocation unwind on open failure

In the Linux kernel, the following vulnerability has been resolved: net: ftgmac100: fix ring allocation unwind on open failure ftgmac100_alloc_rings() allocates rx_skbs, tx_skbs, rxdes, txdes, and rx_scratch in stages. On intermediate failures it returned -ENOMEM directly, leaking resources allocated earlier in the function. Rework the failure path to use staged local unwind labels and free allocated resources in reverse order before returning -ENOMEM. This matches common netdev allocation cleanup style.

Published May 1, 2026 · Updated Oct 15, 2026

High · CVSS 8.3

CVE-2026-31712: ksmbd: require minimum ACE size in smb_check_perm_dacl()

In the Linux kernel, the following vulnerability has been resolved: ksmbd: require minimum ACE size in smb_check_perm_dacl() Both ACE-walk loops in smb_check_perm_dacl() only guard against an under-sized remaining buffer, not against an ACE whose declared `ace->size` is smaller than the struct it claims to describe: if (offsetof(struct smb_ace, access_req) > aces_size) break; ace_size = le16_to_cpu(ace->size); if (ace_size > aces_size) break; The first check only requires the 4-byte ACE header to be in bounds; it does not require access_req (4 bytes at offset 4) to be readable. An attacker who has set a crafted DACL on a file they own can declare ace->size == 4 with aces_size == 4, pass both checks, and then granted |= le32_to_cpu(ace->access_req); /* upper loop */ compare_sids(&sid, &ace->sid); /* lower loop */ reads access_req at offset 4 (OOB by up to 4 bytes) and ace->sid at offset 8 (OOB by up to CIFS_SID_BASE_SIZE + SID_MAX_SUB_AUTHORITIES * 4 bytes). Tighten both loops to require ace_size >= offsetof(struct smb_ace, sid) + CIFS_SID_BASE_SIZE which is the smallest valid on-wire ACE layout (4-byte header + 4-byte access_req + 8-byte sid base with zero sub-auths). Also reject ACEs whose sid.num_subauth exceeds SID_MAX_SUB_AUTHORITIES before letting compare_sids() dereference sub_auth[] entries. parse_sec_desc() already enforces an equivalent check (lines 441-448); smb_check_perm_dacl() simply grew weaker validation over time. Reachability: authenticated SMB client with permission to set an ACL on a file. On a subsequent CREATE against that file, the kernel walks the stored DACL via smb_check_perm_dacl() and triggers the OOB read. Not pre-auth, and the OOB read is not reflected to the attacker, but KASAN reports and kernel state corruption are possible.

Published May 1, 2026 · Updated Oct 15, 2026

High · CVSS 7.5

CVE-2026-31711: smb: server: fix active_num_conn leak on transport allocation failure

In the Linux kernel, the following vulnerability has been resolved: smb: server: fix active_num_conn leak on transport allocation failure Commit 77ffbcac4e56 ("smb: server: fix leak of active_num_conn in ksmbd_tcp_new_connection()") addressed the kthread_run() failure path. The earlier alloc_transport() == NULL path in the same function has the same leak, is reachable pre-authentication via any TCP connect to port 445, and was empirically reproduced on UML (ARCH=um, v7.0-rc7): a small number of forced allocation failures were sufficient to put ksmbd into a state where every subsequent connection attempt was rejected for the remainder of the boot. ksmbd_kthread_fn() increments active_num_conn before calling ksmbd_tcp_new_connection() and discards the return value, so when alloc_transport() returns NULL the socket is released and -ENOMEM returned without decrementing the counter. Each such failure permanently consumes one slot from the max_connections pool; once cumulative failures reach the cap, atomic_inc_return() hits the threshold on every subsequent accept and every new connection is rejected. The counter is only reset by module reload. An unauthenticated remote attacker can drive the server toward the memory pressure that makes alloc_transport() fail by holding open connections with large RFC1002 lengths up to MAX_STREAM_PROT_LEN (0x00FFFFFF); natural transient allocation failures on a loaded host produce the same drift more slowly. Mirror the existing rollback pattern in ksmbd_kthread_fn(): on the alloc_transport() failure path, decrement active_num_conn gated on server_conf.max_connections. Repro details: with the patch reverted, forced alloc_transport() NULL returns leaked counter slots and subsequent connection attempts -- including legitimate connects issued after the forced-fail window had closed -- were all rejected with "Limit the maximum number of connections". With this patch applied, the same connect sequence produces no rejections and the counter cycles cleanly between zero and one on every accept.

Published May 1, 2026 · Updated Oct 15, 2026

Critical · CVSS 9.8

CVE-2026-31705: ksmbd: fix out-of-bounds write in smb2_get_ea() EA alignment

In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix out-of-bounds write in smb2_get_ea() EA alignment smb2_get_ea() applies 4-byte alignment padding via memset() after writing each EA entry. The bounds check on buf_free_len is performed before the value memcpy, but the alignment memset fires unconditionally afterward with no check on remaining space. When the EA value exactly fills the remaining buffer (buf_free_len == 0 after value subtraction), the alignment memset writes 1-3 NUL bytes past the buf_free_len boundary. In compound requests where the response buffer is shared across commands, the first command (e.g., READ) can consume most of the buffer, leaving a tight remainder for the QUERY_INFO EA response. The alignment memset then overwrites past the physical kvmalloc allocation into adjacent kernel heap memory. Add a bounds check before the alignment memset to ensure buf_free_len can accommodate the padding bytes. This is the same bug pattern fixed by commit beef2634f81f ("ksmbd: fix potencial OOB in get_file_all_info() for compound requests") and commit fda9522ed6af ("ksmbd: fix OOB write in QUERY_INFO for compound requests"), both of which added bounds checks before unconditional writes in QUERY_INFO response handlers.

Published May 1, 2026 · Updated Oct 15, 2026

Unknown · CVSS Not scored

CVE-2026-31704: ksmbd: use check_add_overflow() to prevent u16 DACL size overflow

In the Linux kernel, the following vulnerability has been resolved: ksmbd: use check_add_overflow() to prevent u16 DACL size overflow set_posix_acl_entries_dacl() and set_ntacl_dacl() accumulate ACE sizes in u16 variables. When a file has many POSIX ACL entries, the accumulated size can wrap past 65535, causing the pointer arithmetic (char *)pndace + *size to land within already-written ACEs. Subsequent writes then overwrite earlier entries, and pndacl->size gets a truncated value. Use check_add_overflow() at each accumulation point to detect the wrap before it corrupts the buffer, consistent with existing check_mul_overflow() usage elsewhere in smbacl.c.

Published May 1, 2026 · Updated Oct 15, 2026

Unknown · CVSS Not scored

CVE-2026-31696: rxrpc: Fix missing validation of ticket length in non-XDR key preparsing

In the Linux kernel, the following vulnerability has been resolved: rxrpc: Fix missing validation of ticket length in non-XDR key preparsing In rxrpc_preparse(), there are two paths for parsing key payloads: the XDR path (for large payloads) and the non-XDR path (for payloads <= 28 bytes). While the XDR path (rxrpc_preparse_xdr_rxkad()) correctly validates the ticket length against AFSTOKEN_RK_TIX_MAX, the non-XDR path fails to do so. This allows an unprivileged user to provide a very large ticket length. When this key is later read via rxrpc_read(), the total token size (toksize) calculation results in a value that exceeds AFSTOKEN_LENGTH_MAX, triggering a WARN_ON(). [ 2001.302904] WARNING: CPU: 2 PID: 2108 at net/rxrpc/key.c:778 rxrpc_read+0x109/0x5c0 [rxrpc] Fix this by adding a check in the non-XDR parsing path of rxrpc_preparse() to ensure the ticket length does not exceed AFSTOKEN_RK_TIX_MAX, bringing it into parity with the XDR parsing logic.

Published May 1, 2026 · Updated Oct 15, 2026

High · CVSS 7.8

CVE-2026-31694: fuse: reject oversized dirents in page cache

In the Linux kernel, the following vulnerability has been resolved: fuse: reject oversized dirents in page cache fuse_add_dirent_to_cache() computes a serialized dirent size from the server-controlled namelen field and copies the dirent into a single page-cache page. The existing logic only checks whether the dirent fits in the remaining space of the current page and advances to a fresh page if not. It never checks whether the dirent itself exceeds PAGE_SIZE. As a result, a malicious FUSE server can return a dirent with namelen=4095, producing a serialized record size of 4120 bytes. On 4 KiB page systems this causes memcpy() to overflow the cache page by 24 bytes into the following kernel page. Reject dirents that cannot fit in a single page before copying them into the readdir cache.

Published May 1, 2026 · Updated Oct 15, 2026

Unknown · CVSS Not scored

CVE-2026-31681: netfilter: xt_multiport: validate range encoding in checkentry

In the Linux kernel, the following vulnerability has been resolved: netfilter: xt_multiport: validate range encoding in checkentry ports_match_v1() treats any non-zero pflags entry as the start of a port range and unconditionally consumes the next ports[] element as the range end. The checkentry path currently validates protocol, flags and count, but it does not validate the range encoding itself. As a result, malformed rules can mark the last slot as a range start or place two range starts back to back, leaving ports_match_v1() to step past the last valid ports[] element while interpreting the rule. Reject malformed multiport v1 rules in checkentry by validating that each range start has a following element and that the following element is not itself marked as another range start.

Published Apr 25, 2026 · Updated Oct 15, 2026

Unknown · CVSS Not scored

CVE-2026-31671: xfrm_user: fix info leak in build_report()

In the Linux kernel, the following vulnerability has been resolved: xfrm_user: fix info leak in build_report() struct xfrm_user_report is a __u8 proto field followed by a struct xfrm_selector which means there is three "empty" bytes of padding, but the padding is never zeroed before copying to userspace. Fix that up by zeroing the structure before setting individual member variables.

Published Apr 24, 2026 · Updated Oct 15, 2026

Unknown · CVSS Not scored

CVE-2026-31670: net: rfkill: prevent unlimited numbers of rfkill events from being created

In the Linux kernel, the following vulnerability has been resolved: net: rfkill: prevent unlimited numbers of rfkill events from being created Userspace can create an unlimited number of rfkill events if the system is so configured, while not consuming them from the rfkill file descriptor, causing a potential out of memory situation. Prevent this from bounding the number of pending rfkill events at a "large" number (i.e. 1000) to prevent abuses like this.

Published Apr 24, 2026 · Updated Oct 15, 2026

Unknown · CVSS Not scored

CVE-2026-31664: xfrm: clear trailing padding in build_polexpire()

In the Linux kernel, the following vulnerability has been resolved: xfrm: clear trailing padding in build_polexpire() build_expire() clears the trailing padding bytes of struct xfrm_user_expire after setting the hard field via memset_after(), but the analogous function build_polexpire() does not do this for struct xfrm_user_polexpire. The padding bytes after the __u8 hard field are left uninitialized from the heap allocation, and are then sent to userspace via netlink multicast to XFRMNLGRP_EXPIRE listeners, leaking kernel heap memory contents. Add the missing memset_after() call, matching build_expire().

Published Apr 24, 2026 · Updated Oct 15, 2026

Unknown · CVSS Not scored

CVE-2026-31658: net: altera-tse: fix skb leak on DMA mapping error in tse_start_xmit()

In the Linux kernel, the following vulnerability has been resolved: net: altera-tse: fix skb leak on DMA mapping error in tse_start_xmit() When dma_map_single() fails in tse_start_xmit(), the function returns NETDEV_TX_OK without freeing the skb. Since NETDEV_TX_OK tells the stack the packet was consumed, the skb is never freed, leaking memory on every DMA mapping failure. Add dev_kfree_skb_any() before returning to properly free the skb.

Published Apr 24, 2026 · Updated Oct 15, 2026

Unknown · CVSS Not scored

CVE-2026-31651: mmc: vub300: fix NULL-deref on disconnect

In the Linux kernel, the following vulnerability has been resolved: mmc: vub300: fix NULL-deref on disconnect Make sure to deregister the controller before dropping the reference to the driver data on disconnect to avoid NULL-pointer dereferences or use-after-free.

Published Apr 24, 2026 · Updated Oct 15, 2026

Unknown · CVSS Not scored

CVE-2026-31642: rxrpc: Fix call removal to use RCU safe deletion

In the Linux kernel, the following vulnerability has been resolved: rxrpc: Fix call removal to use RCU safe deletion Fix rxrpc call removal from the rxnet->calls list to use list_del_rcu() rather than list_del_init() to prevent stuffing up reading /proc/net/rxrpc/calls from potentially getting into an infinite loop. This, however, means that list_empty() no longer works on an entry that's been deleted from the list, making it harder to detect prior deletion. Fix this by: Firstly, make rxrpc_destroy_all_calls() only dump the first ten calls that are unexpectedly still on the list. Limiting the number of steps means there's no need to call cond_resched() or to remove calls from the list here, thereby eliminating the need for rxrpc_put_call() to check for that. rxrpc_put_call() can then be fixed to unconditionally delete the call from the list as it is the only place that the deletion occurs.

Published Apr 24, 2026 · Updated Oct 15, 2026

Unknown · CVSS Not scored

CVE-2026-31634: rxrpc: fix reference count leak in rxrpc_server_keyring()

In the Linux kernel, the following vulnerability has been resolved: rxrpc: fix reference count leak in rxrpc_server_keyring() This patch fixes a reference count leak in rxrpc_server_keyring() by checking if rx->securities is already set.

Published Apr 24, 2026 · Updated Oct 15, 2026

High · CVSS 8.8

CVE-2026-31629: nfc: llcp: add missing return after LLCP_CLOSED checks

In the Linux kernel, the following vulnerability has been resolved: nfc: llcp: add missing return after LLCP_CLOSED checks In nfc_llcp_recv_hdlc() and nfc_llcp_recv_disc(), when the socket state is LLCP_CLOSED, the code correctly calls release_sock() and nfc_llcp_sock_put() but fails to return. Execution falls through to the remainder of the function, which calls release_sock() and nfc_llcp_sock_put() again. This results in a double release_sock() and a refcount underflow via double nfc_llcp_sock_put(), leading to a use-after-free. Add the missing return statements after the LLCP_CLOSED branches in both functions to prevent the fall-through.

Published Apr 24, 2026 · Updated Oct 15, 2026

Unknown · CVSS Not scored

CVE-2026-31628: x86/CPU: Fix FPDSS on Zen1

In the Linux kernel, the following vulnerability has been resolved: x86/CPU: Fix FPDSS on Zen1 Zen1's hardware divider can leave, under certain circumstances, partial results from previous operations. Those results can be leaked by another, attacker thread. Fix that with a chicken bit.

Published Apr 24, 2026 · Updated Oct 15, 2026

Unknown · CVSS Not scored

CVE-2026-31625: HID: alps: fix NULL pointer dereference in alps_raw_event()

In the Linux kernel, the following vulnerability has been resolved: HID: alps: fix NULL pointer dereference in alps_raw_event() Commit ecfa6f34492c ("HID: Add HID_CLAIMED_INPUT guards in raw_event callbacks missing them") attempted to fix up the HID drivers that had missed the previous fix that was done in 2ff5baa9b527 ("HID: appleir: Fix potential NULL dereference at raw event handle"), but the alps driver was missed. Fix this up by properly checking in the hid-alps driver that it had been claimed correctly before attempting to process the raw event.

Published Apr 24, 2026 · Updated Oct 15, 2026

Unknown · CVSS Not scored

CVE-2026-31624: HID: core: clamp report_size in s32ton() to avoid undefined shift

In the Linux kernel, the following vulnerability has been resolved: HID: core: clamp report_size in s32ton() to avoid undefined shift s32ton() shifts by n-1 where n is the field's report_size, a value that comes directly from a HID device. The HID parser bounds report_size only to <= 256, so a broken HID device can supply a report descriptor with a wide field that triggers shift exponents up to 256 on a 32-bit type when an output report is built via hid_output_field() or hid_set_field(). Commit ec61b41918587 ("HID: core: fix shift-out-of-bounds in hid_report_raw_event") added the same n > 32 clamp to the function snto32(), but s32ton() was never given the same fix as I guess syzbot hadn't figured out how to fuzz a device the same way. Fix this up by just clamping the max value of n, just like snto32() does.

Published Apr 24, 2026 · Updated Oct 15, 2026

High · CVSS 8.8

CVE-2026-31622: NFC: digital: Bounds check NFC-A cascade depth in SDD response handler

In the Linux kernel, the following vulnerability has been resolved: NFC: digital: Bounds check NFC-A cascade depth in SDD response handler The NFC-A anti-collision cascade in digital_in_recv_sdd_res() appends 3 or 4 bytes to target->nfcid1 on each round, but the number of cascade rounds is controlled entirely by the peer device. The peer sets the cascade tag in the SDD_RES (deciding 3 vs 4 bytes) and the cascade-incomplete bit in the SEL_RES (deciding whether another round follows). ISO 14443-3 limits NFC-A to three cascade levels and target->nfcid1 is sized accordingly (NFC_NFCID1_MAXSIZE = 10), but nothing in the driver actually enforces this. This means a malicious peer can keep the cascade running, writing past the heap-allocated nfc_target with each round. Fix this by rejecting the response when the accumulated UID would exceed the buffer. Commit e329e71013c9 ("NFC: nci: Bounds check struct nfc_target arrays") fixed similar missing checks against the same field on the NCI path.

Published Apr 24, 2026 · Updated Oct 15, 2026

Medium · CVSS 5.5

CVE-2026-31617: usb: gadget: f_ncm: validate minimum block_len in ncm_unwrap_ntb()

In the Linux kernel, the following vulnerability has been resolved: usb: gadget: f_ncm: validate minimum block_len in ncm_unwrap_ntb() The block_len read from the host-supplied NTB header is checked against ntb_max but has no lower bound. When block_len is smaller than opts->ndp_size, the bounds check of: ndp_index > (block_len - opts->ndp_size) will underflow producing a huge unsigned value that ndp_index can never exceed, defeating the check entirely. The same underflow occurs in the datagram index checks against block_len - opts->dpe_size. With those checks neutered, a malicious USB host can choose ndp_index and datagram offsets that point past the actual transfer, and the skb_put_data() copies adjacent kernel memory into the network skb. Fix this by rejecting block lengths that cannot hold at least the NTB header plus one NDP. This will make block_len - opts->ndp_size and block_len - opts->dpe_size both well-defined. Commit 8d2b1a1ec9f5 ("CDC-NCM: avoid overflow in sanity checking") fixed a related class of issues on the host side of NCM.

Published Apr 24, 2026 · Updated Oct 15, 2026

High · CVSS 7.5

CVE-2026-31612: ksmbd: validate EaNameLength in smb2_get_ea()

In the Linux kernel, the following vulnerability has been resolved: ksmbd: validate EaNameLength in smb2_get_ea() smb2_get_ea() reads ea_req->EaNameLength from the client request and passes it directly to strncmp() as the comparison length without verifying that the length of the name really is the size of the input buffer received. Fix this up by properly checking the size of the name based on the value received and the overall size of the request, to prevent a later strncmp() call to use the length as a "trusted" size of the buffer. Without this check, uninitialized heap values might be slowly leaked to the client.

Published Apr 24, 2026 · Updated Oct 15, 2026

High · CVSS 8.6

CVE-2026-31611: ksmbd: require 3 sub-authorities before reading sub_auth[2]

In the Linux kernel, the following vulnerability has been resolved: ksmbd: require 3 sub-authorities before reading sub_auth[2] parse_dacl() compares each ACE SID against sid_unix_NFS_mode and on match reads sid.sub_auth[2] as the file mode. If sid_unix_NFS_mode is the prefix S-1-5-88-3 with num_subauth = 2 then compare_sids() compares only min(num_subauth, 2) sub-authorities so a client SID with num_subauth = 2 and sub_auth = {88, 3} will match. If num_subauth = 2 and the ACE is placed at the very end of the security descriptor, sub_auth[2] will be 4 bytes past end_of_acl. The out-of-band bytes will then be masked to the low 9 bits and applied as the file's POSIX mode, probably not something that is good to have happen. Fix this up by forcing the SID to actually carry a third sub-authority before reading it at all.

Published Apr 24, 2026 · Updated Oct 15, 2026

Unknown · CVSS Not scored

CVE-2026-31583: media: em28xx: fix use-after-free in em28xx_v4l2_open()

In the Linux kernel, the following vulnerability has been resolved: media: em28xx: fix use-after-free in em28xx_v4l2_open() em28xx_v4l2_open() reads dev->v4l2 without holding dev->lock, creating a race with em28xx_v4l2_init()'s error path and em28xx_v4l2_fini(), both of which free the em28xx_v4l2 struct and set dev->v4l2 to NULL under dev->lock. This race leads to two issues: - use-after-free in v4l2_fh_init() when accessing vdev->ctrl_handler, since the video_device is embedded in the freed em28xx_v4l2 struct. - NULL pointer dereference in em28xx_resolution_set() when accessing v4l2->norm, since dev->v4l2 has been set to NULL. Fix this by moving the mutex_lock() before the dev->v4l2 read and adding a NULL check for dev->v4l2 under the lock.

Published Apr 24, 2026 · Updated Oct 15, 2026

Unknown · CVSS Not scored

CVE-2026-31580: bcache: fix cached_dev.sb_bio use-after-free and crash

In the Linux kernel, the following vulnerability has been resolved: bcache: fix cached_dev.sb_bio use-after-free and crash In our production environment, we have received multiple crash reports regarding libceph, which have caught our attention: ``` [6888366.280350] Call Trace: [6888366.280452] blk_update_request+0x14e/0x370 [6888366.280561] blk_mq_end_request+0x1a/0x130 [6888366.280671] rbd_img_handle_request+0x1a0/0x1b0 [rbd] [6888366.280792] rbd_obj_handle_request+0x32/0x40 [rbd] [6888366.280903] __complete_request+0x22/0x70 [libceph] [6888366.281032] osd_dispatch+0x15e/0xb40 [libceph] [6888366.281164] ? inet_recvmsg+0x5b/0xd0 [6888366.281272] ? ceph_tcp_recvmsg+0x6f/0xa0 [libceph] [6888366.281405] ceph_con_process_message+0x79/0x140 [libceph] [6888366.281534] ceph_con_v1_try_read+0x5d7/0xf30 [libceph] [6888366.281661] ceph_con_workfn+0x329/0x680 [libceph] ``` After analyzing the coredump file, we found that the address of dc->sb_bio has been freed. We know that cached_dev is only freed when it is stopped. Since sb_bio is a part of struct cached_dev, rather than an alloc every time. If the device is stopped while writing to the superblock, the released address will be accessed at endio. This patch hopes to wait for sb_write to complete in cached_dev_free. It should be noted that we analyzed the cause of the problem, then tell all details to the QWEN and adopted the modifications it made.

Published Apr 24, 2026 · Updated Oct 15, 2026

Unknown · CVSS Not scored

CVE-2026-31565: RDMA/irdma: Fix deadlock during netdev reset with active connections

In the Linux kernel, the following vulnerability has been resolved: RDMA/irdma: Fix deadlock during netdev reset with active connections Resolve deadlock that occurs when user executes netdev reset while RDMA applications (e.g., rping) are active. The netdev reset causes ice driver to remove irdma auxiliary driver, triggering device_delete and subsequent client removal. During client removal, uverbs_client waits for QP reference count to reach zero while cma_client holds the final reference, creating circular dependency and indefinite wait in iWARP mode. Skip QP reference count wait during device reset to prevent deadlock.

Published Apr 24, 2026 · Updated Oct 15, 2026

High · CVSS 7.5

CVE-2026-31563: net: macb: Use dev_consume_skb_any() to free TX SKBs

In the Linux kernel, the following vulnerability has been resolved: net: macb: Use dev_consume_skb_any() to free TX SKBs The napi_consume_skb() function is not intended to be called in an IRQ disabled context. However, after commit 6bc8a5098bf4 ("net: macb: Fix tx_ptr_lock locking"), the freeing of TX SKBs is performed with IRQs disabled. To resolve the following call trace, use dev_consume_skb_any() for freeing TX SKBs: WARNING: kernel/softirq.c:430 at __local_bh_enable_ip+0x174/0x188, CPU#0: ksoftirqd/0/15 Modules linked in: CPU: 0 UID: 0 PID: 15 Comm: ksoftirqd/0 Not tainted 7.0.0-rc4-next-20260319-yocto-standard-dirty #37 PREEMPT Hardware name: ZynqMP ZCU102 Rev1.1 (DT) pstate: 200000c5 (nzCv daIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : __local_bh_enable_ip+0x174/0x188 lr : local_bh_enable+0x24/0x38 sp : ffff800082b3bb10 x29: ffff800082b3bb10 x28: ffff0008031f3c00 x27: 000000000011ede0 x26: ffff000800a7ff00 x25: ffff800083937ce8 x24: 0000000000017a80 x23: ffff000803243a78 x22: 0000000000000040 x21: 0000000000000000 x20: ffff000800394c80 x19: 0000000000000200 x18: 0000000000000001 x17: 0000000000000001 x16: ffff000803240000 x15: 0000000000000000 x14: ffffffffffffffff x13: 0000000000000028 x12: ffff000800395650 x11: ffff8000821d1528 x10: ffff800081c2bc08 x9 : ffff800081c1e258 x8 : 0000000100000301 x7 : ffff8000810426ec x6 : 0000000000000000 x5 : 0000000000000001 x4 : 0000000000000001 x3 : 0000000000000000 x2 : 0000000000000008 x1 : 0000000000000200 x0 : ffff8000810428dc Call trace: __local_bh_enable_ip+0x174/0x188 (P) local_bh_enable+0x24/0x38 skb_attempt_defer_free+0x190/0x1d8 napi_consume_skb+0x58/0x108 macb_tx_poll+0x1a4/0x558 __napi_poll+0x50/0x198 net_rx_action+0x1f4/0x3d8 handle_softirqs+0x16c/0x560 run_ksoftirqd+0x44/0x80 smpboot_thread_fn+0x1d8/0x338 kthread+0x120/0x150 ret_from_fork+0x10/0x20 irq event stamp: 29751 hardirqs last enabled at (29750): [<ffff8000813be184>] _raw_spin_unlock_irqrestore+0x44/0x88 hardirqs last disabled at (29751): [<ffff8000813bdf60>] _raw_spin_lock_irqsave+0x38/0x98 softirqs last enabled at (29150): [<ffff8000800f1aec>] handle_softirqs+0x504/0x560 softirqs last disabled at (29153): [<ffff8000800f2fec>] run_ksoftirqd+0x44/0x80

Published Apr 24, 2026 · Updated Oct 15, 2026

Unknown · CVSS Not scored

CVE-2026-31555: futex: Clear stale exiting pointer in futex_lock_pi() retry path

In the Linux kernel, the following vulnerability has been resolved: futex: Clear stale exiting pointer in futex_lock_pi() retry path Fuzzying/stressing futexes triggered: WARNING: kernel/futex/core.c:825 at wait_for_owner_exiting+0x7a/0x80, CPU#11: futex_lock_pi_s/524 When futex_lock_pi_atomic() sees the owner is exiting, it returns -EBUSY and stores a refcounted task pointer in 'exiting'. After wait_for_owner_exiting() consumes that reference, the local pointer is never reset to nil. Upon a retry, if futex_lock_pi_atomic() returns a different error, the bogus pointer is passed to wait_for_owner_exiting(). CPU0 CPU1 CPU2 futex_lock_pi(uaddr) // acquires the PI futex exit() futex_cleanup_begin() futex_state = EXITING; futex_lock_pi(uaddr) futex_lock_pi_atomic() attach_to_pi_owner() // observes EXITING *exiting = owner; // takes ref return -EBUSY wait_for_owner_exiting(-EBUSY, owner) put_task_struct(); // drops ref // exiting still points to owner goto retry; futex_lock_pi_atomic() lock_pi_update_atomic() cmpxchg(uaddr) *uaddr ^= WAITERS // whatever // value changed return -EAGAIN; wait_for_owner_exiting(-EAGAIN, exiting) // stale WARN_ON_ONCE(exiting) Fix this by resetting upon retry, essentially aligning it with requeue_pi.

Published Apr 24, 2026 · Updated Oct 15, 2026

Unknown · CVSS Not scored

CVE-2026-31546: net: bonding: fix NULL deref in bond_debug_rlb_hash_show

In the Linux kernel, the following vulnerability has been resolved: net: bonding: fix NULL deref in bond_debug_rlb_hash_show rlb_clear_slave intentionally keeps RLB hash-table entries on the rx_hashtbl_used_head list with slave set to NULL when no replacement slave is available. However, bond_debug_rlb_hash_show visites client_info->slave without checking if it's NULL. Other used-list iterators in bond_alb.c already handle this NULL-slave state safely: - rlb_update_client returns early on !client_info->slave - rlb_req_update_slave_clients, rlb_clear_slave, and rlb_rebalance compare slave values before visiting - lb_req_update_subnet_clients continues if slave is NULL The following NULL deref crash can be trigger in bond_debug_rlb_hash_show: [ 1.289791] BUG: kernel NULL pointer dereference, address: 0000000000000000 [ 1.292058] RIP: 0010:bond_debug_rlb_hash_show (drivers/net/bonding/bond_debugfs.c:41) [ 1.293101] RSP: 0018:ffffc900004a7d00 EFLAGS: 00010286 [ 1.293333] RAX: 0000000000000000 RBX: ffff888102b48200 RCX: ffff888102b48204 [ 1.293631] RDX: ffff888102b48200 RSI: ffffffff839daad5 RDI: ffff888102815078 [ 1.293924] RBP: ffff888102815078 R08: ffff888102b4820e R09: 0000000000000000 [ 1.294267] R10: 0000000000000000 R11: 0000000000000000 R12: ffff888100f929c0 [ 1.294564] R13: ffff888100f92a00 R14: 0000000000000001 R15: ffffc900004a7ed8 [ 1.294864] FS: 0000000001395380(0000) GS:ffff888196e75000(0000) knlGS:0000000000000000 [ 1.295239] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 1.295480] CR2: 0000000000000000 CR3: 0000000102adc004 CR4: 0000000000772ef0 [ 1.295897] Call Trace: [ 1.296134] seq_read_iter (fs/seq_file.c:231) [ 1.296341] seq_read (fs/seq_file.c:164) [ 1.296493] full_proxy_read (fs/debugfs/file.c:378 (discriminator 1)) [ 1.296658] vfs_read (fs/read_write.c:572) [ 1.296981] ksys_read (fs/read_write.c:717) [ 1.297132] do_syscall_64 (arch/x86/entry/syscall_64.c:63 (discriminator 1) arch/x86/entry/syscall_64.c:94 (discriminator 1)) [ 1.297325] entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130) Add a NULL check and print "(none)" for entries with no assigned slave.

Published Apr 24, 2026 · Updated Oct 15, 2026

Unknown · CVSS Not scored

CVE-2026-31521: module: Fix kernel panic when a symbol st_shndx is out of bounds

In the Linux kernel, the following vulnerability has been resolved: module: Fix kernel panic when a symbol st_shndx is out of bounds The module loader doesn't check for bounds of the ELF section index in simplify_symbols(): for (i = 1; i < symsec->sh_size / sizeof(Elf_Sym); i++) { const char *name = info->strtab + sym[i].st_name; switch (sym[i].st_shndx) { case SHN_COMMON: [...] default: /* Divert to percpu allocation if a percpu var. */ if (sym[i].st_shndx == info->index.pcpu) secbase = (unsigned long)mod_percpu(mod); else /** HERE --> **/ secbase = info->sechdrs[sym[i].st_shndx].sh_addr; sym[i].st_value += secbase; break; } } A symbol with an out-of-bounds st_shndx value, for example 0xffff (known as SHN_XINDEX or SHN_HIRESERVE), may cause a kernel panic: BUG: unable to handle page fault for address: ... RIP: 0010:simplify_symbols+0x2b2/0x480 ... Kernel panic - not syncing: Fatal exception This can happen when module ELF is legitimately using SHN_XINDEX or when it is corrupted. Add a bounds check in simplify_symbols() to validate that st_shndx is within the valid range before using it. This issue was discovered due to a bug in llvm-objcopy, see relevant discussion for details [1]. [1] https://lore.kernel.org/linux-modules/20251224005752.201911-1-ihor.solodrai@linux.dev/

Published Apr 22, 2026 · Updated Oct 15, 2026

Unknown · CVSS Not scored

CVE-2026-31518: esp: fix skb leak with espintcp and async crypto

In the Linux kernel, the following vulnerability has been resolved: esp: fix skb leak with espintcp and async crypto When the TX queue for espintcp is full, esp_output_tail_tcp will return an error and not free the skb, because with synchronous crypto, the common xfrm output code will drop the packet for us. With async crypto (esp_output_done), we need to drop the skb when esp_output_tail_tcp returns an error.

Published Apr 22, 2026 · Updated Oct 15, 2026

Unknown · CVSS Not scored

CVE-2026-31515: af_key: validate families in pfkey_send_migrate()

In the Linux kernel, the following vulnerability has been resolved: af_key: validate families in pfkey_send_migrate() syzbot was able to trigger a crash in skb_put() [1] Issue is that pfkey_send_migrate() does not check old/new families, and that set_ipsecrequest() @family argument was truncated, thus possibly overfilling the skb. Validate families early, do not wait set_ipsecrequest(). [1] skbuff: skb_over_panic: text:ffffffff8a752120 len:392 put:16 head:ffff88802a4ad040 data:ffff88802a4ad040 tail:0x188 end:0x180 dev:<NULL> kernel BUG at net/core/skbuff.c:214 ! Call Trace: <TASK> skb_over_panic net/core/skbuff.c:219 [inline] skb_put+0x159/0x210 net/core/skbuff.c:2655 skb_put_zero include/linux/skbuff.h:2788 [inline] set_ipsecrequest net/key/af_key.c:3532 [inline] pfkey_send_migrate+0x1270/0x2e50 net/key/af_key.c:3636 km_migrate+0x155/0x260 net/xfrm/xfrm_state.c:2848 xfrm_migrate+0x2140/0x2450 net/xfrm/xfrm_policy.c:4705 xfrm_do_migrate+0x8ff/0xaa0 net/xfrm/xfrm_user.c:3150

Published Apr 22, 2026 · Updated Oct 15, 2026