Browse CVE records published in June 2026, with severity, affected products, CWE, KEV, and source-backed vulnerability context.
Showing 50 of 6774 matching CVEs · Page 1 of 136.
A flaw was found in gnutls. The PKCS#7 padding check, performed during decryption, was not constant-time. This timing side-channel could allow a remote attacker to potentially leak sensitive information about the padding bytes through observable timing differences. This vulnerability is a form of information disclosure.
Published Jun 1, 2026 · Updated Oct 14, 2026
A flaw was found in GLib. A buffer over-read can occur in g_io_channel_read_line_backend() in the giochannel.c file when a custom line terminator with a length greater than one is set, causing memcmp to read past the GString buffer. This vulnerability can cause a minor information disclosure of 7 bytes or a denial of service when the buffer over-read crosses a page boundary.
Published Jun 30, 2026 · Updated Oct 14, 2026
A flaw was found in GLib. A buffer over-read can occur in the g_regex_replace function when used with the `G_REGEX_RAW` compile flag and case-change replacement escapes because the string_append function processes matched substrings using UTF-8 functions that assume valid UTF-8 input, even when the string is treated as raw bytes. This vulnerability can cause a minor information disclosure of 1-5 bytes and a denial of service when the buffer over-read crosses a page boundary.
Published Jun 30, 2026 · Updated Oct 14, 2026
A flaw was found in GLib. An out-of-bounds read of only 2 bytes can occur in the g_date_time_get_ymd function in the glib/gdatetime.c file when an invalid GDateTime object produced by the g_date_time_add_full function is processed. This flaw can corrupt the date output and potentially cause logic errors that may lead to a denial of service.
Published Jun 30, 2026 · Updated Oct 14, 2026
A flaw was found in GLib. An off-by-one error can occur in the gvs_tuple_is_normal function in the glib/gvariant-serialiser.c file when doing an alignment padding check because the bounds check uses > instead of >=, causing an out-of-bounds read of only 1 byte. This issue can cause a minor information disclosure of 1 byte and a denial of service when the out-of-bounds read crosses a page boundary.
Published Jun 30, 2026 · Updated Oct 14, 2026
A flaw was found in GnuTLS. The `gnutls_pkcs11_token_set_pin` function, used for changing the Security Officer PIN, can lead to a use-after-free vulnerability. This occurs when an attacker attempts to change the PIN with a NULL old PIN for a token that lacks a protected authentication path.
Published Jun 16, 2026 · Updated Oct 14, 2026
A double free issue has been identified in libarchive's RAR5 reader. During parsing of a specially crafted RAR5 archive, the filtered_buf pointer may remain stale after being freed during unpacking state reinitialization. Subsequent processing of another archive entry can trigger a second free of the same memory region, resulting in a double-free condition. Successful exploitation may cause applications using the vulnerable libarchive API to terminate unexpectedly, leading to a denial of service.
Published Jun 30, 2026 · Updated Oct 14, 2026
A flaw was found in p11-kit. The RPC message attribute parsing functions p11_rpc_message_get_attribute() and p11_rpc_message_get_attribute_array_value() form a mutually-recursive call chain with no recursion depth limit when processing nested CKA_WRAP_TEMPLATE, CKA_UNWRAP_TEMPLATE, and CKA_DERIVE_TEMPLATE attributes. An unauthenticated attacker with local access to the p11-kit RPC Unix domain socket can send a specially crafted request with deeply nested template attributes, causing stack exhaustion and crashing the p11-kit server process and its dependent services.
Published Jun 29, 2026 · Updated Oct 14, 2026
A flaw was found in OpenSSH. A local unprivileged attacker on a Linux client host can hijack client-side X11 forwarding connections. This is possible by pre-binding the preferred abstract X socket name when X11 forwarding is enabled and a local UNIX-domain X socket is used. A successful attack can compromise the confidentiality of forwarded X11 traffic, including sensitive window contents and input, and may allow some manipulation of the forwarded session.
Published Jun 23, 2026 · Updated Oct 14, 2026
A flaw was found in OpenSSH. A malicious SSH server can exploit a double free vulnerability in the Diffie-Hellman Group Exchange (DH-GEX) client path. This occurs during FIPS (Federal Information Processing Standards) mode known-group validation when the client processes attacker-controlled DH-GEX group parameters. Successful exploitation leads to client-side process termination, resulting in a Denial of Service (DoS).
Published Jun 23, 2026 · Updated Oct 14, 2026
A flaw was found in GLib. A state confusion issue exists in g_dbus_node_info_new_for_xml() in the gio/gdbusintrospection.c file when processing malformed D-Bus introspection XML, specifically with a `node` element nested within other elements like `method`, `signal`, `property` or `arg`. This issue can cause an unsigned integer overflow and lead to an out-of-bounds read, resulting in a denial of service.
Published Jun 30, 2026 · Updated Oct 14, 2026
A flaw was found in the cifs-utils package where the cifs.upcall helper fails to securely drop its root privileges before looking up user information inside a user-controlled environment. A local, low privileged attacker can exploit this by using a crafted request_key payload to trick the root-owned helper into entering a custom environment (namespace) containing a malicious NSS module. This forces the system to load the attacker's controlled NSS Module and configuration, allowing them to execute arbitrary commands as the root user, elevating their privileges and fully compromising the system.
Published Jun 18, 2026 · Updated Oct 14, 2026
A flaw was found in Keycloak Policy Enforcer. This vulnerability allows any authenticated user to bypass all authorization policies, including role, scope, and User-Managed Access (UMA) permission checks. By including the configured access-denied page path within a request URL, either as a path segment or a query parameter, an attacker can gain unauthorized access to protected resources.
Published Jun 25, 2026 · Updated Oct 14, 2026
Decoding a maliciously-crafted MIME header containing many invalid encoded-words can consume excessive CPU.
Published Jun 2, 2026 · Updated Oct 14, 2026
Improper Neutralization of CRLF Sequences in HTTP Headers ('HTTP Request/Response Splitting') vulnerability in ninenines cowlib allows HTTP response splitting via non-VCHAR bytes in structured-fields string values. cow_http_struct_hd:escape_string/2 in cowlib only escapes \ and ", passing all other bytes through verbatim. This creates an encoder/decoder asymmetry: the matching parser accepts only printable ASCII (0x20–0x7E, excluding " and \), but the encoder emits any byte including CR and LF. An application that builds a structured HTTP header via cow_http_struct_hd:item/1 (or a higher-level wrapper such as cow_http_hd:wt_protocol/1) from attacker-controlled input can have \r\n injected into the serialized header value. Once on the wire, the injected CRLF terminates the current header and any following bytes are interpreted as a new header, enabling HTTP response splitting. This issue affects cowlib: from 2.9.0 onward.
Published Jun 8, 2026 · Updated Oct 14, 2026
A flaw was found in GLib. The D-Bus client-side implementation of the DBUS_COOKIE_SHA1 SASL authentication mechanism does not validate the cookie_context parameter received from the server. A malicious D-Bus server can supply a cookie_context containing path traversal sequences, causing the client to read an arbitrary file and exfiltrate sensitive data by verifying guessed file contents against a generated hash.
Published Jun 30, 2026 · Updated Oct 14, 2026
A flaw was found in GLib. An off-by-one error can occur in the g_key_file_get_locale_string_list function in the gkeyfile.c file when loading a key file with an empty value. This flaw can cause an out-of-bounds access of 1 byte or a denial of service when the out-of-bounds access crosses a page boundary.
Published Jun 30, 2026 · Updated Oct 14, 2026
A flaw was found in the Windows Machine Config Operator (WMCO) for Red Hat OpenShift Container Platform. WMCO establishes SSH connections to Windows worker nodes without verifying the remote server host key. An adjacent-network attacker who can intercept or redirect WMCO's SSH session can capture WICD and kubelet bootstrap credentials transferred during node configuration, enabling compromise of Windows node identities in the cluster.
Published Jun 22, 2026 · Updated Oct 14, 2026
A flaw was found in the Windows Machine Config Operator (WMCO) for Red Hat OpenShift Container Platform. The WICD CSR auto-approver validates that a Certificate Signing Request contains the organization system:wicd-nodes but does not reject additional organization values such as system:masters. A compromised Windows worker node that holds WICD credentials can submit a CSR that is auto-approved and signed by the cluster, yielding a client certificate that grants cluster-administrator privileges and enabling full cluster takeover.
Published Jun 22, 2026 · Updated Oct 14, 2026
A local privilege escalation vulnerability was found in the ansible.posix authorized_key module. The module's keyfile() function uses os.chown() instead of os.lchown() and opens files without O_NOFOLLOW when managing SSH authorized keys. An unprivileged local user can pre-stage symbolic links in their ~/.ssh directory to redirect file ownership changes to arbitrary system paths when an operator runs the authorized_key task as root, leading to local privilege escalation.
Published Jun 10, 2026 · Updated Oct 13, 2026
A vulnerability was determined in AOMEI Backupper up to 8.3.0. Impacted is an unknown function in the library amwrtdrv.sys of the component Kernel Driver. Executing a manipulation can lead to improper access controls. The attack needs to be launched locally. The exploit has been publicly disclosed and may be utilized. The vendor was contacted early about this disclosure but did not respond in any way.
Published Jun 21, 2026 · Updated Oct 13, 2026
A flaw was found in KubeVirt's safepath package used by virt-handler. The OpenAtNoFollow function uses O_PATH|O_NOFOLLOW to obtain a file descriptor to a path leaf, but downstream operations resolve the path via /proc/self/fd/N using link-following syscalls. When the leaf is a symlink, the kernel dereferences it, defeating the intended no-follow protection. An attacker with access to a virt-launcher pod can exploit this to redirect virt-handler's IPC socket connections, including the notify socket used for VM domain lifecycle events. By hijacking this socket, the attacker can inject arbitrary domain events into virt-handler, causing it to take incorrect lifecycle actions, corrupt VM state in the Kubernetes API, or crash — resulting in sustained denial of VM management services for all virtual machines on the affected node. Additionally, the same symlink following flaw allows virt-handler to apply file ownership or permission changes to unintended host paths.
Published Jun 24, 2026 · Updated Oct 12, 2026
A remote code execution vulnerability was found in libaom, the reference AV1 codec implementation. Insufficient bounds validation in the AV1 encoder's SVC (Scalable Video Coding) layer ID control allows an attacker to supply crafted video frame pixels that overlap with internal encoder layer context structures. In fork-based video processing services, an attacker can use this to hijack the cyclic refresh map pointer, brute-force the process base address via a crash oracle, and redirect control flow to achieve arbitrary command execution. Exploitation requires the target service to use libaom with SVC encoding enabled and accept attacker-supplied video frames.
Published Jun 19, 2026 · Updated Oct 9, 2026
A heap-buffer-overflow read vulnerability was found in libaom, the reference AV1 codec implementation. A missing bounds check in the SVC (Scalable Video Coding) layer ID control function allows setting a spatial_layer_id exceeding the configured number of layers. This causes an out-of-bounds heap read of approximately 40,728 bytes when computing a layer context array index. An attacker who can influence SVC encoder parameters in a network-facing service could exploit this for information disclosure (heap content leak) or denial of service (segmentation fault from hitting unmapped memory).
Published Jun 19, 2026 · Updated Oct 9, 2026
An arbitrary address write vulnerability was found in libaom, the reference AV1 codec implementation. A missing bounds check in the SVC (Scalable Video Coding) layer ID control function allows an attacker to inject an arbitrary pointer into the cyclic refresh map field via crafted image pixel values. The encoder then writes approximately 1,200 bytes at the attacker-controlled address. This is fully deterministic and does not require a separate information leak. An attacker who can supply frames to a network-facing libaom encoder with SVC enabled could exploit this for denial of service or potential code execution.
Published Jun 19, 2026 · Updated Oct 9, 2026
A heap buffer overflow vulnerability was found in libaom, the reference AV1 codec implementation. A flaw in the AV1 encoder's Look-Ahead Processing (LAP) mode causes the first-pass stats ring buffer wrap-around guard to be bypassed when g_lag_in_frames is set to 1 or higher. This results in a 232-byte out-of-bounds write on every encoded frame after the second, corrupting adjacent heap objects. An attacker who can influence encoder configuration in a transcoding service or WebRTC session could exploit this to cause a denial of service (process crash) or potentially achieve code execution.
Published Jun 19, 2026 · Updated Oct 9, 2026
A flaw was found in dracut. A remote attacker on the adjacent network can exploit this vulnerability by providing specially crafted DHCP (Dynamic Host Configuration Protocol) options, such as a malicious hostname, to a system using dracut's legacy DHCP path. These options are improperly handled and written into temporary shell scripts without proper escaping, leading to command injection. This allows the attacker to achieve root code execution within the initramfs, potentially compromising the system's boot and network behavior.
Published Jun 10, 2026 · Updated Oct 8, 2026
A flaw was found in ansible-core. The ansible-galaxy role install command processes dependency specifications from a role's meta/requirements.yml file. Due to improper neutralization of argument delimiters, a malicious role author can inject arbitrary git configuration flags through the src field. This allows arbitrary code execution on the machine of a user who installs the role via ansible-galaxy role install.
Published Jun 5, 2026 · Updated Oct 8, 2026
Capgo before 12.128.2 contains an open redirect vulnerability in the confirm-signup endpoint that allows attackers to redirect users to arbitrary external websites. The confirmation_url parameter is not validated, enabling attackers to craft malicious links for phishing and credential harvesting attacks.
Published Jun 20, 2026 · Updated Oct 8, 2026
Capgo before 12.128.2 fails to enforce a maximum value on the minimum password length field in its password policy configuration. An authenticated organization administrator can set an extremely large numeric value (e.g., billions of characters) as the minimum password length, making compliance impossible for all organization members. Once the policy is enabled, users (including administrators) are unable to change their passwords or access the organization, resulting in an organization-wide account lockout and application-level denial of service.
Published Jun 20, 2026 · Updated Oct 8, 2026
SeaweedFS before 4.34 contains a path traversal vulnerability in the S3 gateway DeleteMultipleObjectsHandler that allows authenticated S3 principals with write access to a single bucket to delete arbitrary objects in other tenants' buckets by supplying object keys containing ../ sequences in the DeleteObjects XML request body. Attackers can bypass authorization controls through a confused deputy condition, as the validateRequestPath middleware only inspects URL-captured path variables and never examines request-body keys, allowing the filer path to collapse directory traversal sequences and resolve deletions outside the authorized bucket.
Published Jun 30, 2026 · Updated Oct 8, 2026
OpenRemote before 1.25.0 contains an insecure direct object reference (IDOR) vulnerability in the bulk alarm deletion endpoint that allows authenticated users to permanently delete alarms belonging to other tenants by supplying arbitrary alarm IDs. The removeAlarms() method in AlarmResourceImpl.java omits realm-scoping validation in its JPA query, enabling any user with alarm-write permissions to enumerate sequential auto-increment alarm IDs and delete cross-tenant alarm records without authorization.
Published Jun 23, 2026 · Updated Oct 8, 2026
Grav before 2.0.0-beta.2 contains an XML external entity injection vulnerability in SVG file upload processing that allows authenticated attackers to read arbitrary files. The application uses simplexml_load_string without disabling external entity loading, enabling attackers to inject XXE payloads via malicious SVG files to exfiltrate sensitive data.
Published Jun 23, 2026 · Updated Oct 8, 2026
Grav CMS before 2.0.0-beta.2 contains multiple code-execution vulnerabilities. Three unsafe unserialize() calls - in Scheduler\JobQueue, Framework\Cache\Adapter\FileCache, and Session - deserialize untrusted data without restricting allowed classes, enabling PHP object injection and, via a gadget chain, arbitrary code execution where an attacker controls the serialized input. Additionally, InstallCommand's git clone operation passes the branch, url, and path parameters into a shell command without escaping, allowing OS command injection via plugin/theme installation (which requires admin access). A Twig security blocklist bypass (server-side template injection) is also present. The issues are fixed in 2.0.0-beta.2.
Published Jun 30, 2026 · Updated Oct 8, 2026
SiYuan before v3.6.1 fails to sanitize package metadata and README content in the Bazaar marketplace, allowing malicious package authors to inject arbitrary HTML and JavaScript. Attackers can achieve remote code execution on any user browsing the Bazaar by embedding XSS payloads in package displayName, description, or README fields, exploiting Electron's nodeIntegration setting to execute OS commands.
Published Jun 21, 2026 · Updated Oct 8, 2026
capacitor-native-biometric before 12.128.2 contains an authentication bypass vulnerability where the onAuthenticationSucceeded() method fails to validate CryptoObject parameters. Attackers can hook the onAuthenticationSucceeded() function using dynamic instrumentation to bypass biometric authentication without valid credentials.
Published Jun 20, 2026 · Updated Oct 8, 2026
Capgo CLI before 12.128.2 contains arbitrary file overwrite vulnerabilities in login and build credentials operations that follow symlinks without validation. Attackers can create malicious symlinks in repositories to overwrite arbitrary files or expose credentials with world-readable permissions when developers run the CLI.
Published Jun 21, 2026 · Updated Oct 8, 2026
Chainlit before 2.10.1 contains a session hijacking vulnerability that allows unauthenticated attackers to restore and inherit authenticated user sessions by presenting a valid sessionId during WebSocket session restoration without ownership verification. Attackers can exploit the restore_existing_session path to assume a victim's permissions and roles, enabling unauthorized invocation of tools and access to data restricted to the authenticated victim.
Published Jun 22, 2026 · Updated Oct 8, 2026
PraisonAI before 1.5.128 contains a cross-origin agent execution vulnerability in the AGUI endpoint that allows remote attackers to trigger arbitrary agent execution. The POST /agui endpoint lacks authentication and hardcodes Access-Control-Allow-Origin: * headers, combined with Starlette's Content-Type-agnostic JSON parsing, enabling attackers to bypass CORS preflight checks via simple requests and exfiltrate sensitive agent responses including tool execution results and environment data.
Published Jun 18, 2026 · Updated Oct 8, 2026
PraisonAI before 4.5.128 contains an arbitrary shell command execution vulnerability where the UI modules hardcode approval_mode to auto, overriding administrator configuration from PRAISON_APPROVAL_MODE environment variable. Authenticated attackers can instruct the LLM agent to execute arbitrary shell commands via subprocess.run with shell=True, bypassing the manual approval gate and insufficient command sanitization blocklists.
Published Jun 18, 2026 · Updated Oct 8, 2026
PraisonAI before 1.5.128 caches tool approval decisions by tool name only, not by invocation arguments, allowing subsequent execute_command calls to bypass approval prompts. Attackers can exploit this by obtaining initial approval for a benign command, then silently exfiltrate API keys and credentials via subsequent shell commands without user consent.
Published Jun 18, 2026 · Updated Oct 8, 2026
marimo before 0.23.9 contains a reflected cross-site scripting vulnerability in the notebook page that allows unauthenticated attackers to inject arbitrary JavaScript by exploiting improper escaping of single quotes in the file query parameter reflected into an inline JavaScript string literal. Attackers can craft a malicious link with a payload beginning with __new__ to bypass the 404 check and inject JavaScript into the page, which executes without Content-Security-Policy restrictions in the origin of a victim's marimo server.
Published Jun 17, 2026 · Updated Oct 8, 2026
Hermes Agent before 0.16.0 creates response_store.db and webhook_subscriptions.json with world-readable permissions (mode 0o644), exposing conversation history and HMAC secrets to local users. Attackers with local filesystem access can read these files directly to obtain sensitive data including conversation history, tool payloads, prompts, and per-route HMAC secrets.
Published Jun 17, 2026 · Updated Oct 8, 2026
Hermes Agent before 0.16.0 contains a DNS rebinding vulnerability in WebSocket endpoints that allows remote attackers to bypass Host and Origin validation. FastAPI HTTP middleware does not execute for WebSocket upgrade requests on /api/pty, /api/ws, /api/pub, and /api/events endpoints, enabling attackers to exploit DNS rebinding and inject malicious commands or read terminal output.
Published Jun 17, 2026 · Updated Oct 8, 2026
OpenClaw before 2026.5.7 contains a hostname validation vulnerability in retry endpoint checks that allows matching hostname prefixes instead of exact hostnames. Attackers can exploit this by crafting a hostname prefix resembling a trusted host to send authentication material to untrusted endpoints.
Published Jun 12, 2026 · Updated Oct 8, 2026
OpenClaw before 2026.4.29 contains an authorization bypass vulnerability in the QQBot streaming command that allows authenticated senders to mutate configuration without explicit allowFrom restrictions. Attackers can modify QQBot streaming configuration outside intended admin policy by reaching the affected command without non-wildcard allowlist entry requirements.
Published Jun 12, 2026 · Updated Oct 8, 2026
Summarize before 0.17.0 contains a server-side request forgery vulnerability that allows attackers who control a podcast RSS feed to direct the host to fetch transcript content from loopback addresses, link-local addresses, RFC 1918 private ranges, or other reserved destinations by supplying malicious podcast:transcript URL values. Attackers can bypass protections through DNS rebinding and redirect-based techniques, as redirect targets are not revalidated and hostnames are not resolved before request dispatch, exposing internal service responses through the summarization flow.
Published Jun 11, 2026 · Updated Oct 8, 2026
Summarize before 0.17.0 contains a resource exhaustion vulnerability that allows remote attackers to cause disk exhaustion by serving media responses that bypass the enforced size limit through missing or misreported Content-Length headers, chunked transfer encoding, or failed HEAD requests. Attackers who control a podcast feed or media URL can stream an unbounded response to local storage via the temp-file download path, exhausting disk or system resources on the host running the CLI.
Published Jun 11, 2026 · Updated Oct 8, 2026
BuddyPress 14.4.0 contains an insecure direct object reference vulnerability in the friends REST API that allows any authenticated attacker to enumerate another user's complete friend list. Attackers can query the friends endpoint with an arbitrary user_id because the get_items_permissions_check method only verifies that the requester is logged in and never checks ownership of the requested list, resulting in disclosure of users' private social connections.
Published Jun 9, 2026 · Updated Oct 8, 2026
BuddyPress 14.4.0 contains an insecure direct object reference vulnerability in the messages REST API that allows authenticated attackers to access arbitrary private message threads by supplying a user_id parameter in the request. Attackers can pass another user's identifier to the get_item_permissions_check method, which validates the supplied user_id instead of the logged-in user and is reused by the update and delete handlers, to read, reply to, or delete any user's private messages.
Published Jun 9, 2026 · Updated Oct 8, 2026
