High · CVSS 7.8
In the Linux kernel, the following vulnerability has been resolved:
Input: uinput - fix circular locking dependency with ff-core
A lockdep circular locking dependency warning can be triggered
reproducibly when using a force-feedback gamepad with uinput (for
example, playing ELDEN RING under Wine with a Flydigi Vader 5
controller):
ff->mutex -> udev->mutex -> input_mutex -> dev->mutex -> ff->mutex
The cycle is caused by four lock acquisition paths:
1. ff upload: input_ff_upload() holds ff->mutex and calls
uinput_dev_upload_effect() -> uinput_request_submit() ->
uinput_request_send(), which acquires udev->mutex.
2. device create: uinput_ioctl_handler() holds udev->mutex and calls
uinput_create_device() -> input_register_device(), which acquires
input_mutex.
3. device register: input_register_device() holds input_mutex and
calls kbd_connect() -> input_register_handle(), which acquires
dev->mutex.
4. evdev release: evdev_release() calls input_flush_device() under
dev->mutex, which calls input_ff_flush() acquiring ff->mutex.
Fix this by introducing a new state_lock spinlock to protect
udev->state and udev->dev access in uinput_request_send() instead of
acquiring udev->mutex. The function only needs to atomically check
device state and queue an input event into the ring buffer via
uinput_dev_event() -- both operations are safe under a spinlock
(ktime_get_ts64() and wake_up_interruptible() do not sleep). This
breaks the ff->mutex -> udev->mutex link since a spinlock is a leaf in
the lock ordering and cannot form cycles with mutexes.
To keep state transitions visible to uinput_request_send(), protect
writes to udev->state in uinput_create_device() and
uinput_destroy_device() with the same state_lock spinlock.
Additionally, move init_completion(&request->done) from
uinput_request_send() to uinput_request_submit() before
uinput_request_reserve_slot(). Once the slot is allocated,
uinput_flush_requests() may call complete() on it at any time from
the destroy path, so the completion must be initialised before the
request becomes visible.
Lock ordering after the fix:
ff->mutex -> state_lock (spinlock, leaf)
udev->mutex -> state_lock (spinlock, leaf)
udev->mutex -> input_mutex -> dev->mutex -> ff->mutex (no back-edge)
Published Apr 24, 2026 · Updated Aug 5, 2026
High · CVSS 7.8
In the Linux kernel, the following vulnerability has been resolved:
btrfs: fix incorrect return value after changing leaf in lookup_extent_data_ref()
After commit 1618aa3c2e01 ("btrfs: simplify return variables in
lookup_extent_data_ref()"), the err and ret variables were merged into
a single ret variable. However, when btrfs_next_leaf() returns 0
(success), ret is overwritten from -ENOENT to 0. If the first key in
the next leaf does not match (different objectid or type), the function
returns 0 instead of -ENOENT, making the caller believe the lookup
succeeded when it did not. This can lead to operations on the wrong
extent tree item, potentially causing extent tree corruption.
Fix this by returning -ENOENT directly when the key does not match,
instead of relying on the ret variable.
Published Apr 24, 2026 · Updated Aug 5, 2026
High · CVSS 7.8
In the Linux kernel, the following vulnerability has been resolved:
netfilter: nft_ct: fix use-after-free in timeout object destroy
nft_ct_timeout_obj_destroy() frees the timeout object with kfree()
immediately after nf_ct_untimeout(), without waiting for an RCU grace
period. Concurrent packet processing on other CPUs may still hold
RCU-protected references to the timeout object obtained via
rcu_dereference() in nf_ct_timeout_data().
Add an rcu_head to struct nf_ct_timeout and use kfree_rcu() to defer
freeing until after an RCU grace period, matching the approach already
used in nfnetlink_cttimeout.c.
KASAN report:
BUG: KASAN: slab-use-after-free in nf_conntrack_tcp_packet+0x1381/0x29d0
Read of size 4 at addr ffff8881035fe19c by task exploit/80
Call Trace:
nf_conntrack_tcp_packet+0x1381/0x29d0
nf_conntrack_in+0x612/0x8b0
nf_hook_slow+0x70/0x100
__ip_local_out+0x1b2/0x210
tcp_sendmsg_locked+0x722/0x1580
__sys_sendto+0x2d8/0x320
Allocated by task 75:
nft_ct_timeout_obj_init+0xf6/0x290
nft_obj_init+0x107/0x1b0
nf_tables_newobj+0x680/0x9c0
nfnetlink_rcv_batch+0xc29/0xe00
Freed by task 26:
nft_obj_destroy+0x3f/0xa0
nf_tables_trans_destroy_work+0x51c/0x5c0
process_one_work+0x2c4/0x5a0
Published Apr 24, 2026 · Updated Aug 5, 2026
High · CVSS 7.5
In the Linux kernel, the following vulnerability has been resolved:
tipc: fix bc_ackers underflow on duplicate GRP_ACK_MSG
The GRP_ACK_MSG handler in tipc_group_proto_rcv() currently decrements
bc_ackers on every inbound group ACK, even when the same member has
already acknowledged the current broadcast round.
Because bc_ackers is a u16, a duplicate ACK received after the last
legitimate ACK wraps the counter to 65535. Once wrapped,
tipc_group_bc_cong() keeps reporting congestion and later group
broadcasts on the affected socket stay blocked until the group is
recreated.
Fix this by ignoring duplicate or stale ACKs before touching bc_acked or
bc_ackers. This makes repeated GRP_ACK_MSG handling idempotent and
prevents the underflow path.
Published Apr 24, 2026 · Updated Aug 5, 2026
Critical · CVSS 9.8
In the Linux kernel, the following vulnerability has been resolved:
batman-adv: reject oversized global TT response buffers
batadv_tt_prepare_tvlv_global_data() builds the allocation length for a
global TT response in 16-bit temporaries. When a remote originator
advertises a large enough global TT, the TT payload length plus the VLAN
header offset can exceed 65535 and wrap before kmalloc().
The full-table response path still uses the original TT payload length when
it fills tt_change, so the wrapped allocation is too small and
batadv_tt_prepare_tvlv_global_data() writes past the end of the heap object
before the later packet-size check runs.
Fix this by rejecting TT responses whose TVLV value length cannot fit in
the 16-bit TVLV payload length field.
Published Apr 24, 2026 · Updated Aug 5, 2026
Critical · CVSS 9.8
In the Linux kernel, the following vulnerability has been resolved:
batman-adv: hold claim backbone gateways by reference
batadv_bla_add_claim() can replace claim->backbone_gw and drop the old
gateway's last reference while readers still follow the pointer.
The netlink claim dump path dereferences claim->backbone_gw->orig and
takes claim->backbone_gw->crc_lock without pinning the underlying
backbone gateway. batadv_bla_check_claim() still has the same naked
pointer access pattern.
Reuse batadv_bla_claim_get_backbone_gw() in both readers so they operate
on a stable gateway reference until the read-side work is complete.
This keeps the dump and claim-check paths aligned with the lifetime
rules introduced for the other BLA claim readers.
Published Apr 24, 2026 · Updated Aug 5, 2026
High · CVSS 7.8
In the Linux kernel, the following vulnerability has been resolved:
drm/i915/gt: fix refcount underflow in intel_engine_park_heartbeat
A use-after-free / refcount underflow is possible when the heartbeat
worker and intel_engine_park_heartbeat() race to release the same
engine->heartbeat.systole request.
The heartbeat worker reads engine->heartbeat.systole and calls
i915_request_put() on it when the request is complete, but clears
the pointer in a separate, non-atomic step. Concurrently, a request
retirement on another CPU can drop the engine wakeref to zero, triggering
__engine_park() -> intel_engine_park_heartbeat(). If the heartbeat
timer is pending at that point, cancel_delayed_work() returns true and
intel_engine_park_heartbeat() reads the stale non-NULL systole pointer
and calls i915_request_put() on it again, causing a refcount underflow:
```
<4> [487.221889] Workqueue: i915-unordered engine_retire [i915]
<4> [487.222640] RIP: 0010:refcount_warn_saturate+0x68/0xb0
...
<4> [487.222707] Call Trace:
<4> [487.222711] <TASK>
<4> [487.222716] intel_engine_park_heartbeat.part.0+0x6f/0x80 [i915]
<4> [487.223115] intel_engine_park_heartbeat+0x25/0x40 [i915]
<4> [487.223566] __engine_park+0xb9/0x650 [i915]
<4> [487.223973] ____intel_wakeref_put_last+0x2e/0xb0 [i915]
<4> [487.224408] __intel_wakeref_put_last+0x72/0x90 [i915]
<4> [487.224797] intel_context_exit_engine+0x7c/0x80 [i915]
<4> [487.225238] intel_context_exit+0xf1/0x1b0 [i915]
<4> [487.225695] i915_request_retire.part.0+0x1b9/0x530 [i915]
<4> [487.226178] i915_request_retire+0x1c/0x40 [i915]
<4> [487.226625] engine_retire+0x122/0x180 [i915]
<4> [487.227037] process_one_work+0x239/0x760
<4> [487.227060] worker_thread+0x200/0x3f0
<4> [487.227068] ? __pfx_worker_thread+0x10/0x10
<4> [487.227075] kthread+0x10d/0x150
<4> [487.227083] ? __pfx_kthread+0x10/0x10
<4> [487.227092] ret_from_fork+0x3d4/0x480
<4> [487.227099] ? __pfx_kthread+0x10/0x10
<4> [487.227107] ret_from_fork_asm+0x1a/0x30
<4> [487.227141] </TASK>
```
Fix this by replacing the non-atomic pointer read + separate clear with
xchg() in both racing paths. xchg() is a single indivisible hardware
instruction that atomically reads the old pointer and writes NULL. This
guarantees only one of the two concurrent callers obtains the non-NULL
pointer and performs the put, the other gets NULL and skips it.
(cherry picked from commit 13238dc0ee4f9ab8dafa2cca7295736191ae2f42)
Published Apr 24, 2026 · Updated Aug 5, 2026
Critical · CVSS 9.8
In the Linux kernel, the following vulnerability has been resolved:
net: stmmac: fix integer underflow in chain mode
The jumbo_frm() chain-mode implementation unconditionally computes
len = nopaged_len - bmax;
where nopaged_len = skb_headlen(skb) (linear bytes only) and bmax is
BUF_SIZE_8KiB or BUF_SIZE_2KiB. However, the caller stmmac_xmit()
decides to invoke jumbo_frm() based on skb->len (total length including
page fragments):
is_jumbo = stmmac_is_jumbo_frm(priv, skb->len, enh_desc);
When a packet has a small linear portion (nopaged_len <= bmax) but a
large total length due to page fragments (skb->len > bmax), the
subtraction wraps as an unsigned integer, producing a huge len value
(~0xFFFFxxxx). This causes the while (len != 0) loop to execute
hundreds of thousands of iterations, passing skb->data + bmax * i
pointers far beyond the skb buffer to dma_map_single(). On IOMMU-less
SoCs (the typical deployment for stmmac), this maps arbitrary kernel
memory to the DMA engine, constituting a kernel memory disclosure and
potential memory corruption from hardware.
Fix this by introducing a buf_len local variable clamped to
min(nopaged_len, bmax). Computing len = nopaged_len - buf_len is then
always safe: it is zero when the linear portion fits within a single
descriptor, causing the while (len != 0) loop to be skipped naturally,
and the fragment loop in stmmac_xmit() handles page fragments afterward.
Published Apr 24, 2026 · Updated Aug 5, 2026
High · CVSS 7.8
In the Linux kernel, the following vulnerability has been resolved:
mm: filemap: fix nr_pages calculation overflow in filemap_map_pages()
When running stress-ng on my Arm64 machine with v7.0-rc3 kernel, I
encountered some very strange crash issues showing up as "Bad page state":
"
[ 734.496287] BUG: Bad page state in process stress-ng-env pfn:415735fb
[ 734.496427] page: refcount:0 mapcount:1 mapping:0000000000000000 index:0x4cf316 pfn:0x415735fb
[ 734.496434] flags: 0x57fffe000000800(owner_2|node=1|zone=2|lastcpupid=0x3ffff)
[ 734.496439] raw: 057fffe000000800 0000000000000000 dead000000000122 0000000000000000
[ 734.496440] raw: 00000000004cf316 0000000000000000 0000000000000000 0000000000000000
[ 734.496442] page dumped because: nonzero mapcount
"
After analyzing this page’s state, it is hard to understand why the
mapcount is not 0 while the refcount is 0, since this page is not where
the issue first occurred. By enabling the CONFIG_DEBUG_VM config, I can
reproduce the crash as well and captured the first warning where the issue
appears:
"
[ 734.469226] page: refcount:33 mapcount:0 mapping:00000000bef2d187 index:0x81a0 pfn:0x415735c0
[ 734.469304] head: order:5 mapcount:0 entire_mapcount:0 nr_pages_mapped:0 pincount:0
[ 734.469315] memcg:ffff000807a8ec00
[ 734.469320] aops:ext4_da_aops ino:100b6f dentry name(?):"stress-ng-mmaptorture-9397-0-2736200540"
[ 734.469335] flags: 0x57fffe400000069(locked|uptodate|lru|head|node=1|zone=2|lastcpupid=0x3ffff)
......
[ 734.469364] page dumped because: VM_WARN_ON_FOLIO((_Generic((page + nr_pages - 1),
const struct page *: (const struct folio *)_compound_head(page + nr_pages - 1), struct page *:
(struct folio *)_compound_head(page + nr_pages - 1))) != folio)
[ 734.469390] ------------[ cut here ]------------
[ 734.469393] WARNING: ./include/linux/rmap.h:351 at folio_add_file_rmap_ptes+0x3b8/0x468,
CPU#90: stress-ng-mlock/9430
[ 734.469551] folio_add_file_rmap_ptes+0x3b8/0x468 (P)
[ 734.469555] set_pte_range+0xd8/0x2f8
[ 734.469566] filemap_map_folio_range+0x190/0x400
[ 734.469579] filemap_map_pages+0x348/0x638
[ 734.469583] do_fault_around+0x140/0x198
......
[ 734.469640] el0t_64_sync+0x184/0x188
"
The code that triggers the warning is: "VM_WARN_ON_FOLIO(page_folio(page +
nr_pages - 1) != folio, folio)", which indicates that set_pte_range()
tried to map beyond the large folio’s size.
By adding more debug information, I found that 'nr_pages' had overflowed
in filemap_map_pages(), causing set_pte_range() to establish mappings for
a range exceeding the folio size, potentially corrupting fields of pages
that do not belong to this folio (e.g., page->_mapcount).
After above analysis, I think the possible race is as follows:
CPU 0 CPU 1
filemap_map_pages() ext4_setattr()
//get and lock folio with old inode->i_size
next_uptodate_folio()
.......
//shrink the inode->i_size
i_size_write(inode, attr->ia_size);
//calculate the end_pgoff with the new inode->i_size
file_end = DIV_ROUND_UP(i_size_read(mapping->host), PAGE_SIZE) - 1;
end_pgoff = min(end_pgoff, file_end);
......
//nr_pages can be overflowed, cause xas.xa_index > end_pgoff
end = folio_next_index(folio) - 1;
nr_pages = min(end, end_pgoff) - xas.xa_index + 1;
......
//map large folio
filemap_map_folio_range()
......
//truncate folios
truncate_pagecache(inode, inode->i_size);
To fix this issue, move the 'end_pgoff' calculation before
next_uptodate_folio(), so the retrieved folio stays consistent with the
file end to avoid
---truncated---
Published Apr 24, 2026 · Updated Aug 5, 2026
High · CVSS 7.8
In the Linux kernel, the following vulnerability has been resolved:
net: lan966x: fix use-after-free and leak in lan966x_fdma_reload()
When lan966x_fdma_reload() fails to allocate new RX buffers, the restore
path restarts DMA using old descriptors whose pages were already freed
via lan966x_fdma_rx_free_pages(). Since page_pool_put_full_page() can
release pages back to the buddy allocator, the hardware may DMA into
memory now owned by other kernel subsystems.
Additionally, on the restore path, the newly created page pool (if
allocation partially succeeded) is overwritten without being destroyed,
leaking it.
Fix both issues by deferring the release of old pages until after the
new allocation succeeds. Save the old page array before the allocation
so old pages can be freed on the success path. On the failure path, the
old descriptors, pages and page pool are all still valid, making the
restore safe. Also ensure the restore path re-enables NAPI and wakes
the netdev, matching the success path.
Published Apr 24, 2026 · Updated Aug 5, 2026
High · CVSS 7.5
In the Linux kernel, the following vulnerability has been resolved:
rxrpc: Fix use of wrong skb when comparing queued RESP challenge serial
In rxrpc_post_response(), the code should be comparing the challenge serial
number from the cached response before deciding to switch to a newer
response, but looks at the newer packet private data instead, rendering the
comparison always false.
Fix this by switching to look at the older packet.
Fix further[1] to substitute the new packet in place of the old one if
newer and also to release whichever we don't use.
Published Apr 24, 2026 · Updated Aug 5, 2026
High · CVSS 7.5
In the Linux kernel, the following vulnerability has been resolved:
rxrpc: Only put the call ref if one was acquired
rxrpc_input_packet_on_conn() can process a to-client packet after the
current client call on the channel has already been torn down. In that
case chan->call is NULL, rxrpc_try_get_call() returns NULL and there is
no reference to drop.
The client-side implicit-end error path does not account for that and
unconditionally calls rxrpc_put_call(). This turns a protocol error
path into a kernel crash instead of rejecting the packet.
Only drop the call reference if one was actually acquired. Keep the
existing protocol error handling unchanged.
Published Apr 24, 2026 · Updated Aug 5, 2026
Critical · CVSS 9.8
In the Linux kernel, the following vulnerability has been resolved:
rxrpc: reject undecryptable rxkad response tickets
rxkad_decrypt_ticket() decrypts the RXKAD response ticket and then
parses the buffer as plaintext without checking whether
crypto_skcipher_decrypt() succeeded.
A malformed RESPONSE can therefore use a non-block-aligned ticket
length, make the decrypt operation fail, and still drive the ticket
parser with attacker-controlled bytes.
Check the decrypt result and abort the connection with RXKADBADTICKET
when ticket decryption fails.
Published Apr 24, 2026 · Updated Aug 5, 2026
Critical · CVSS 9.1
In the Linux kernel, the following vulnerability has been resolved:
rxrpc: fix RESPONSE authenticator parser OOB read
rxgk_verify_authenticator() copies auth_len bytes into a temporary
buffer and then passes p + auth_len as the parser limit to
rxgk_do_verify_authenticator(). Since p is a __be32 *, that inflates the
parser end pointer by a factor of four and lets malformed RESPONSE
authenticators read past the kmalloc() buffer.
Decoded from the original latest-net reproduction logs with
scripts/decode_stacktrace.sh:
BUG: KASAN: slab-out-of-bounds in rxgk_verify_response()
Call Trace:
dump_stack_lvl() [lib/dump_stack.c:123]
print_report() [mm/kasan/report.c:379 mm/kasan/report.c:482]
kasan_report() [mm/kasan/report.c:597]
rxgk_verify_response()
[net/rxrpc/rxgk.c:1103 net/rxrpc/rxgk.c:1167
net/rxrpc/rxgk.c:1274]
rxrpc_process_connection()
[net/rxrpc/conn_event.c:266 net/rxrpc/conn_event.c:364
net/rxrpc/conn_event.c:386]
process_one_work() [kernel/workqueue.c:3281]
worker_thread()
[kernel/workqueue.c:3353 kernel/workqueue.c:3440]
kthread() [kernel/kthread.c:436]
ret_from_fork() [arch/x86/kernel/process.c:164]
Allocated by task 54:
rxgk_verify_response()
[include/linux/slab.h:954 net/rxrpc/rxgk.c:1155
net/rxrpc/rxgk.c:1274]
rxrpc_process_connection()
[net/rxrpc/conn_event.c:266 net/rxrpc/conn_event.c:364
net/rxrpc/conn_event.c:386]
Convert the byte count to __be32 units before constructing the parser
limit.
Published Apr 24, 2026 · Updated Aug 5, 2026
High · CVSS 7.5
In the Linux kernel, the following vulnerability has been resolved:
rxrpc: fix oversized RESPONSE authenticator length check
rxgk_verify_response() decodes auth_len from the packet and is supposed
to verify that it fits in the remaining bytes. The existing check is
inverted, so oversized RESPONSE authenticators are accepted and passed
to rxgk_decrypt_skb(), which can later reach skb_to_sgvec() with an
impossible length and hit BUG_ON(len).
Decoded from the original latest-net reproduction logs with
scripts/decode_stacktrace.sh:
RIP: __skb_to_sgvec()
[net/core/skbuff.c:5285 (discriminator 1)]
Call Trace:
skb_to_sgvec() [net/core/skbuff.c:5305]
rxgk_decrypt_skb() [net/rxrpc/rxgk_common.h:81]
rxgk_verify_response() [net/rxrpc/rxgk.c:1268]
rxrpc_process_connection()
[net/rxrpc/conn_event.c:266 net/rxrpc/conn_event.c:364
net/rxrpc/conn_event.c:386]
process_one_work() [kernel/workqueue.c:3281]
worker_thread()
[kernel/workqueue.c:3353 kernel/workqueue.c:3440]
kthread() [kernel/kthread.c:436]
ret_from_fork() [arch/x86/kernel/process.c:164]
Reject authenticator lengths that exceed the remaining packet payload.
Published Apr 24, 2026 · Updated Aug 5, 2026
Critical · CVSS 9.8
In the Linux kernel, the following vulnerability has been resolved:
rxrpc: Fix integer overflow in rxgk_verify_response()
In rxgk_verify_response(), there's a potential integer overflow due to
rounding up token_len before checking it, thereby allowing the length check to
be bypassed.
Fix this by checking the unrounded value against len too (len is limited as
the response must fit in a single UDP packet).
Published Apr 24, 2026 · Updated Aug 5, 2026
High · CVSS 8.2
In the Linux kernel, the following vulnerability has been resolved:
rxrpc: Fix buffer overread in rxgk_do_verify_authenticator()
Fix rxgk_do_verify_authenticator() to check the buffer size before checking
the nonce.
Published Apr 24, 2026 · Updated Aug 5, 2026
High · CVSS 7.8
In the Linux kernel, the following vulnerability has been resolved:
rxrpc: proc: size address buffers for %pISpc output
The AF_RXRPC procfs helpers format local and remote socket addresses into
fixed 50-byte stack buffers with "%pISpc".
That is too small for the longest current-tree IPv6-with-port form the
formatter can produce. In lib/vsprintf.c, the compressed IPv6 path uses a
dotted-quad tail not only for v4mapped addresses, but also for ISATAP
addresses via ipv6_addr_is_isatap().
As a result, a case such as
[ffff:ffff:ffff:ffff:0:5efe:255.255.255.255]:65535
is possible with the current formatter. That is 50 visible characters, so
51 bytes including the trailing NUL, which does not fit in the existing
char[50] buffers used by net/rxrpc/proc.c.
Size the buffers from the formatter's maximum textual form and switch the
call sites to scnprintf().
Changes since v1:
- correct the changelog to cite the actual maximum current-tree case
explicitly
- frame the proof around the ISATAP formatting path instead of the earlier
mapped-v4 example
Published Apr 24, 2026 · Updated Aug 5, 2026
High · CVSS 7.8
In the Linux kernel, the following vulnerability has been resolved:
i2c: s3c24xx: check the size of the SMBUS message before using it
The first byte of an i2c SMBUS message is the size, and it should be
verified to ensure that it is in the range of 0..I2C_SMBUS_BLOCK_MAX
before processing it.
This is the same logic that was added in commit a6e04f05ce0b ("i2c:
tegra: check msg length in SMBUS block read") to the i2c tegra driver.
Published Apr 24, 2026 · Updated Aug 5, 2026
High · CVSS 7.1
In the Linux kernel, the following vulnerability has been resolved:
staging: rtl8723bs: initialize le_tmp64 in rtw_BIP_verify()
Initialize le_tmp64 to zero in rtw_BIP_verify() to prevent using
uninitialized data.
Smatch warns that only 6 bytes are copied to this 8-byte (u64)
variable, leaving the last two bytes uninitialized:
drivers/staging/rtl8723bs/core/rtw_security.c:1308 rtw_BIP_verify()
warn: not copying enough bytes for '&le_tmp64' (8 vs 6 bytes)
Initializing the variable at the start of the function fixes this
warning and ensures predictable behavior.
Published Apr 24, 2026 · Updated Aug 5, 2026
High · CVSS 8.1
In the Linux kernel, the following vulnerability has been resolved:
smb: client: fix OOB reads parsing symlink error response
When a CREATE returns STATUS_STOPPED_ON_SYMLINK, smb2_check_message()
returns success without any length validation, leaving the symlink
parsers as the only defense against an untrusted server.
symlink_data() walks SMB 3.1.1 error contexts with the loop test "p <
end", but reads p->ErrorId at offset 4 and p->ErrorDataLength at offset
0. When the server-controlled ErrorDataLength advances p to within 1-7
bytes of end, the next iteration will read past it. When the matching
context is found, sym->SymLinkErrorTag is read at offset 4 from
p->ErrorContextData with no check that the symlink header itself fits.
smb2_parse_symlink_response() then bounds-checks the substitute name
using SMB2_SYMLINK_STRUCT_SIZE as the offset of PathBuffer from
iov_base. That value is computed as sizeof(smb2_err_rsp) +
sizeof(smb2_symlink_err_rsp), which is correct only when
ErrorContextCount == 0.
With at least one error context the symlink data sits 8 bytes deeper,
and each skipped non-matching context shifts it further by 8 +
ALIGN(ErrorDataLength, 8). The check is too short, allowing the
substitute name read to run past iov_len. The out-of-bound heap bytes
are UTF-16-decoded into the symlink target and returned to userspace via
readlink(2).
Fix this all up by making the loops test require the full context header
to fit, rejecting sym if its header runs past end, and bound the
substitute name against the actual position of sym->PathBuffer rather
than a fixed offset.
Because sub_offs and sub_len are 16bits, the pointer math will not
overflow here with the new greater-than.
Published Apr 24, 2026 · Updated Aug 5, 2026
Critical · CVSS 9.8
In the Linux kernel, the following vulnerability has been resolved:
smb: client: avoid double-free in smbd_free_send_io() after smbd_send_batch_flush()
smbd_send_batch_flush() already calls smbd_free_send_io(),
so we should not call it again after smbd_post_send()
moved it to the batch list.
Published Apr 24, 2026 · Updated Aug 5, 2026
Critical · CVSS 9.8
In the Linux kernel, the following vulnerability has been resolved:
smb: server: avoid double-free in smb_direct_free_sendmsg after smb_direct_flush_send_list()
smb_direct_flush_send_list() already calls smb_direct_free_sendmsg(),
so we should not call it again after post_sendmsg()
moved it to the batch list.
Published Apr 24, 2026 · Updated Aug 5, 2026
High · CVSS 7.8
In the Linux kernel, the following vulnerability has been resolved:
ALSA: ctxfi: Limit PTP to a single page
Commit 391e69143d0a increased CT_PTP_NUM from 1 to 4 to support 256
playback streams, but the additional pages are not used by the card
correctly. The CT20K2 hardware already has multiple VMEM_PTPAL
registers, but using them separately would require refactoring the
entire virtual memory allocation logic.
ct_vm_map() always uses PTEs in vm->ptp[0].area regardless of
CT_PTP_NUM. On AMD64 systems, a single PTP covers 512 PTEs (2M). When
aggregate memory allocations exceed this limit, ct_vm_map() tries to
access beyond the allocated space and causes a page fault:
BUG: unable to handle page fault for address: ffffd4ae8a10a000
Oops: Oops: 0002 [#1] SMP PTI
RIP: 0010:ct_vm_map+0x17c/0x280 [snd_ctxfi]
Call Trace:
atc_pcm_playback_prepare+0x225/0x3b0
ct_pcm_playback_prepare+0x38/0x60
snd_pcm_do_prepare+0x2f/0x50
snd_pcm_action_single+0x36/0x90
snd_pcm_action_nonatomic+0xbf/0xd0
snd_pcm_ioctl+0x28/0x40
__x64_sys_ioctl+0x97/0xe0
do_syscall_64+0x81/0x610
entry_SYSCALL_64_after_hwframe+0x76/0x7e
Revert CT_PTP_NUM to 1. The 256 SRC_RESOURCE_NUM and playback_count
remain unchanged.
Published Apr 24, 2026 · Updated Aug 5, 2026
High · CVSS 7.5
In the Linux kernel, the following vulnerability has been resolved:
arm64: mm: Handle invalid large leaf mappings correctly
It has been possible for a long time to mark ptes in the linear map as
invalid. This is done for secretmem, kfence, realm dma memory un/share,
and others, by simply clearing the PTE_VALID bit. But until commit
a166563e7ec37 ("arm64: mm: support large block mapping when
rodata=full") large leaf mappings were never made invalid in this way.
It turns out various parts of the code base are not equipped to handle
invalid large leaf mappings (in the way they are currently encoded) and
I've observed a kernel panic while booting a realm guest on a
BBML2_NOABORT system as a result:
[ 15.432706] software IO TLB: Memory encryption is active and system is using DMA bounce buffers
[ 15.476896] Unable to handle kernel paging request at virtual address ffff000019600000
[ 15.513762] Mem abort info:
[ 15.527245] ESR = 0x0000000096000046
[ 15.548553] EC = 0x25: DABT (current EL), IL = 32 bits
[ 15.572146] SET = 0, FnV = 0
[ 15.592141] EA = 0, S1PTW = 0
[ 15.612694] FSC = 0x06: level 2 translation fault
[ 15.640644] Data abort info:
[ 15.661983] ISV = 0, ISS = 0x00000046, ISS2 = 0x00000000
[ 15.694875] CM = 0, WnR = 1, TnD = 0, TagAccess = 0
[ 15.723740] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0
[ 15.755776] swapper pgtable: 4k pages, 48-bit VAs, pgdp=0000000081f3f000
[ 15.800410] [ffff000019600000] pgd=0000000000000000, p4d=180000009ffff403, pud=180000009fffe403, pmd=00e8000199600704
[ 15.855046] Internal error: Oops: 0000000096000046 [#1] SMP
[ 15.886394] Modules linked in:
[ 15.900029] CPU: 0 UID: 0 PID: 1 Comm: swapper/0 Not tainted 7.0.0-rc4-dirty #4 PREEMPT
[ 15.935258] Hardware name: linux,dummy-virt (DT)
[ 15.955612] pstate: 21400005 (nzCv daif +PAN -UAO -TCO +DIT -SSBS BTYPE=--)
[ 15.986009] pc : __pi_memcpy_generic+0x128/0x22c
[ 16.006163] lr : swiotlb_bounce+0xf4/0x158
[ 16.024145] sp : ffff80008000b8f0
[ 16.038896] x29: ffff80008000b8f0 x28: 0000000000000000 x27: 0000000000000000
[ 16.069953] x26: ffffb3976d261ba8 x25: 0000000000000000 x24: ffff000019600000
[ 16.100876] x23: 0000000000000001 x22: ffff0000043430d0 x21: 0000000000007ff0
[ 16.131946] x20: 0000000084570010 x19: 0000000000000000 x18: ffff00001ffe3fcc
[ 16.163073] x17: 0000000000000000 x16: 00000000003fffff x15: 646e612065766974
[ 16.194131] x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000000
[ 16.225059] x11: 0000000000000000 x10: 0000000000000010 x9 : 0000000000000018
[ 16.256113] x8 : 0000000000000018 x7 : 0000000000000000 x6 : 0000000000000000
[ 16.287203] x5 : ffff000019607ff0 x4 : ffff000004578000 x3 : ffff000019600000
[ 16.318145] x2 : 0000000000007ff0 x1 : ffff000004570010 x0 : ffff000019600000
[ 16.349071] Call trace:
[ 16.360143] __pi_memcpy_generic+0x128/0x22c (P)
[ 16.380310] swiotlb_tbl_map_single+0x154/0x2b4
[ 16.400282] swiotlb_map+0x5c/0x228
[ 16.415984] dma_map_phys+0x244/0x2b8
[ 16.432199] dma_map_page_attrs+0x44/0x58
[ 16.449782] virtqueue_map_page_attrs+0x38/0x44
[ 16.469596] virtqueue_map_single_attrs+0xc0/0x130
[ 16.490509] virtnet_rq_alloc.isra.0+0xa4/0x1fc
[ 16.510355] try_fill_recv+0x2a4/0x584
[ 16.526989] virtnet_open+0xd4/0x238
[ 16.542775] __dev_open+0x110/0x24c
[ 16.558280] __dev_change_flags+0x194/0x20c
[ 16.576879] netif_change_flags+0x24/0x6c
[ 16.594489] dev_change_flags+0x48/0x7c
[ 16.611462] ip_auto_config+0x258/0x1114
[ 16.628727] do_one_initcall+0x80/0x1c8
[ 16.645590] kernel_init_freeable+0x208/0x2f0
[ 16.664917] kernel_init+0x24/0x1e0
[ 16.680295] ret_from_fork+0x10/0x20
[ 16.696369] Code: 927cec03 cb0e0021 8b0e0042 a9411c26 (a900340c)
[ 16.723106] ---[ end trace 0000000000000000 ]---
[ 16.752866] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b
[ 16.792556] Kernel Offset: 0x3396ea200000 from 0xffff8000800000
---truncated---
Published Apr 24, 2026 · Updated Aug 5, 2026
High · CVSS 7.5
In the Linux kernel, the following vulnerability has been resolved:
ocfs2: fix possible deadlock between unlink and dio_end_io_write
ocfs2_unlink takes orphan dir inode_lock first and then ip_alloc_sem,
while in ocfs2_dio_end_io_write, it acquires these locks in reverse order.
This creates an ABBA lock ordering violation on lock classes
ocfs2_sysfile_lock_key[ORPHAN_DIR_SYSTEM_INODE] and
ocfs2_file_ip_alloc_sem_key.
Lock Chain #0 (orphan dir inode_lock -> ip_alloc_sem):
ocfs2_unlink
ocfs2_prepare_orphan_dir
ocfs2_lookup_lock_orphan_dir
inode_lock(orphan_dir_inode) <- lock A
__ocfs2_prepare_orphan_dir
ocfs2_prepare_dir_for_insert
ocfs2_extend_dir
ocfs2_expand_inline_dir
down_write(&oi->ip_alloc_sem) <- Lock B
Lock Chain #1 (ip_alloc_sem -> orphan dir inode_lock):
ocfs2_dio_end_io_write
down_write(&oi->ip_alloc_sem) <- Lock B
ocfs2_del_inode_from_orphan()
inode_lock(orphan_dir_inode) <- Lock A
Deadlock Scenario:
CPU0 (unlink) CPU1 (dio_end_io_write)
------ ------
inode_lock(orphan_dir_inode)
down_write(ip_alloc_sem)
down_write(ip_alloc_sem)
inode_lock(orphan_dir_inode)
Since ip_alloc_sem is to protect allocation changes, which is unrelated
with operations in ocfs2_del_inode_from_orphan. So move
ocfs2_del_inode_from_orphan out of ip_alloc_sem to fix the deadlock.
Published Apr 24, 2026 · Updated Aug 5, 2026
High · CVSS 7.8
In the Linux kernel, the following vulnerability has been resolved:
ocfs2: fix use-after-free in ocfs2_fault() when VM_FAULT_RETRY
filemap_fault() may drop the mmap_lock before returning VM_FAULT_RETRY,
as documented in mm/filemap.c:
"If our return value has VM_FAULT_RETRY set, it's because the mmap_lock
may be dropped before doing I/O or by lock_folio_maybe_drop_mmap()."
When this happens, a concurrent munmap() can call remove_vma() and free
the vm_area_struct via RCU. The saved 'vma' pointer in ocfs2_fault() then
becomes a dangling pointer, and the subsequent trace_ocfs2_fault() call
dereferences it -- a use-after-free.
Fix this by saving ip_blkno as a plain integer before calling
filemap_fault(), and removing vma from the trace event. Since
ip_blkno is copied by value before the lock can be dropped, it
remains valid regardless of what happens to the vma or inode
afterward.
Published Apr 24, 2026 · Updated Aug 5, 2026
Critical · CVSS 9.8
In the Linux kernel, the following vulnerability has been resolved:
mm: call ->free_folio() directly in folio_unmap_invalidate()
We can only call filemap_free_folio() if we have a reference to (or hold a
lock on) the mapping. Otherwise, we've already removed the folio from the
mapping so it no longer pins the mapping and the mapping can be removed,
causing a use-after-free when accessing mapping->a_ops.
Follow the same pattern as __remove_mapping() and load the free_folio
function pointer before dropping the lock on the mapping. That lets us
make filemap_free_folio() static as this was the only caller outside
filemap.c.
Published Apr 24, 2026 · Updated Aug 5, 2026
High · CVSS 8.8
In the Linux kernel, the following vulnerability has been resolved:
KVM: x86: Use scratch field in MMIO fragment to hold small write values
When exiting to userspace to service an emulated MMIO write, copy the
to-be-written value to a scratch field in the MMIO fragment if the size
of the data payload is 8 bytes or less, i.e. can fit in a single chunk,
instead of pointing the fragment directly at the source value.
This fixes a class of use-after-free bugs that occur when the emulator
initiates a write using an on-stack, local variable as the source, the
write splits a page boundary, *and* both pages are MMIO pages. Because
KVM's ABI only allows for physically contiguous MMIO requests, accesses
that split MMIO pages are separated into two fragments, and are sent to
userspace one at a time. When KVM attempts to complete userspace MMIO in
response to KVM_RUN after the first fragment, KVM will detect the second
fragment and generate a second userspace exit, and reference the on-stack
variable.
The issue is most visible if the second KVM_RUN is performed by a separate
task, in which case the stack of the initiating task can show up as truly
freed data.
==================================================================
BUG: KASAN: use-after-free in complete_emulated_mmio+0x305/0x420
Read of size 1 at addr ffff888009c378d1 by task syz-executor417/984
CPU: 1 PID: 984 Comm: syz-executor417 Not tainted 5.10.0-182.0.0.95.h2627.eulerosv2r13.x86_64 #3
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.15.0-0-g2dd4b9b3f840-prebuilt.qemu.org 04/01/2014 Call Trace:
dump_stack+0xbe/0xfd
print_address_description.constprop.0+0x19/0x170
__kasan_report.cold+0x6c/0x84
kasan_report+0x3a/0x50
check_memory_region+0xfd/0x1f0
memcpy+0x20/0x60
complete_emulated_mmio+0x305/0x420
kvm_arch_vcpu_ioctl_run+0x63f/0x6d0
kvm_vcpu_ioctl+0x413/0xb20
__se_sys_ioctl+0x111/0x160
do_syscall_64+0x30/0x40
entry_SYSCALL_64_after_hwframe+0x67/0xd1
RIP: 0033:0x42477d
Code: <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b0 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007faa8e6890e8 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
RAX: ffffffffffffffda RBX: 00000000004d7338 RCX: 000000000042477d
RDX: 0000000000000000 RSI: 000000000000ae80 RDI: 0000000000000005
RBP: 00000000004d7330 R08: 00007fff28d546df R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 00000000004d733c
R13: 0000000000000000 R14: 000000000040a200 R15: 00007fff28d54720
The buggy address belongs to the page:
page:0000000029f6a428 refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x9c37
flags: 0xfffffc0000000(node=0|zone=1|lastcpupid=0x1fffff)
raw: 000fffffc0000000 0000000000000000 ffffea0000270dc8 0000000000000000
raw: 0000000000000000 0000000000000000 00000000ffffffff 0000000000000000 page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff888009c37780: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
ffff888009c37800: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>ffff888009c37880: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
^
ffff888009c37900: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
ffff888009c37980: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
==================================================================
The bug can also be reproduced with a targeted KVM-Unit-Test by hacking
KVM to fill a large on-stack variable in complete_emulated_mmio(), i.e. by
overwrite the data value with garbage.
Limit the use of the scratch fields to 8-byte or smaller accesses, and to
just writes, as larger accesses and reads are not affected thanks to
implementation details in the emulator, but add a sanity check to ensure
those details don't change in the future. Specifically, KVM never uses
on-stack variables for accesses larger that 8 bytes, e.g. uses an operand
in the emulator context, and *al
---truncated---
Published Apr 24, 2026 · Updated Aug 5, 2026
High · CVSS 7.8
In the Linux kernel, the following vulnerability has been resolved:
ASoC: qcom: q6apm: move component registration to unmanaged version
q6apm component registers dais dynamically from ASoC toplology, which
are allocated using device managed version apis. Allocating both
component and dynamic dais using managed version could lead to incorrect
free ordering, dai will be freed while component still holding references
to it.
Fix this issue by moving component to unmanged version so
that the dai pointers are only freeded after the component is removed.
==================================================================
BUG: KASAN: slab-use-after-free in snd_soc_del_component_unlocked+0x3d4/0x400 [snd_soc_core]
Read of size 8 at addr ffff00084493a6e8 by task kworker/u48:0/3426
Tainted: [W]=WARN
Hardware name: LENOVO 21N2ZC5PUS/21N2ZC5PUS, BIOS N42ET57W (1.31 ) 08/08/2024
Workqueue: pdr_notifier_wq pdr_notifier_work [pdr_interface]
Call trace:
show_stack+0x28/0x7c (C)
dump_stack_lvl+0x60/0x80
print_report+0x160/0x4b4
kasan_report+0xac/0xfc
__asan_report_load8_noabort+0x20/0x34
snd_soc_del_component_unlocked+0x3d4/0x400 [snd_soc_core]
snd_soc_unregister_component_by_driver+0x50/0x88 [snd_soc_core]
devm_component_release+0x30/0x5c [snd_soc_core]
devres_release_all+0x13c/0x210
device_unbind_cleanup+0x20/0x190
device_release_driver_internal+0x350/0x468
device_release_driver+0x18/0x30
bus_remove_device+0x1a0/0x35c
device_del+0x314/0x7f0
device_unregister+0x20/0xbc
apr_remove_device+0x5c/0x7c [apr]
device_for_each_child+0xd8/0x160
apr_pd_status+0x7c/0xa8 [apr]
pdr_notifier_work+0x114/0x240 [pdr_interface]
process_one_work+0x500/0xb70
worker_thread+0x630/0xfb0
kthread+0x370/0x6c0
ret_from_fork+0x10/0x20
Allocated by task 77:
kasan_save_stack+0x40/0x68
kasan_save_track+0x20/0x40
kasan_save_alloc_info+0x44/0x58
__kasan_kmalloc+0xbc/0xdc
__kmalloc_node_track_caller_noprof+0x1f4/0x620
devm_kmalloc+0x7c/0x1c8
snd_soc_register_dai+0x50/0x4f0 [snd_soc_core]
soc_tplg_pcm_elems_load+0x55c/0x1eb8 [snd_soc_core]
snd_soc_tplg_component_load+0x4f8/0xb60 [snd_soc_core]
audioreach_tplg_init+0x124/0x1fc [snd_q6apm]
q6apm_audio_probe+0x10/0x1c [snd_q6apm]
snd_soc_component_probe+0x5c/0x118 [snd_soc_core]
soc_probe_component+0x44c/0xaf0 [snd_soc_core]
snd_soc_bind_card+0xad0/0x2370 [snd_soc_core]
snd_soc_register_card+0x3b0/0x4c0 [snd_soc_core]
devm_snd_soc_register_card+0x50/0xc8 [snd_soc_core]
x1e80100_platform_probe+0x208/0x368 [snd_soc_x1e80100]
platform_probe+0xc0/0x188
really_probe+0x188/0x804
__driver_probe_device+0x158/0x358
driver_probe_device+0x60/0x190
__device_attach_driver+0x16c/0x2a8
bus_for_each_drv+0x100/0x194
__device_attach+0x174/0x380
device_initial_probe+0x14/0x20
bus_probe_device+0x124/0x154
deferred_probe_work_func+0x140/0x220
process_one_work+0x500/0xb70
worker_thread+0x630/0xfb0
kthread+0x370/0x6c0
ret_from_fork+0x10/0x20
Freed by task 3426:
kasan_save_stack+0x40/0x68
kasan_save_track+0x20/0x40
__kasan_save_free_info+0x4c/0x80
__kasan_slab_free+0x78/0xa0
kfree+0x100/0x4a4
devres_release_all+0x144/0x210
device_unbind_cleanup+0x20/0x190
device_release_driver_internal+0x350/0x468
device_release_driver+0x18/0x30
bus_remove_device+0x1a0/0x35c
device_del+0x314/0x7f0
device_unregister+0x20/0xbc
apr_remove_device+0x5c/0x7c [apr]
device_for_each_child+0xd8/0x160
apr_pd_status+0x7c/0xa8 [apr]
pdr_notifier_work+0x114/0x240 [pdr_interface]
process_one_work+0x500/0xb70
worker_thread+0x630/0xfb0
kthread+0x370/0x6c0
ret_from_fork+0x10/0x20
Published Apr 24, 2026 · Updated Aug 5, 2026
High · CVSS 7.8
In the Linux kernel, the following vulnerability has been resolved:
mm: blk-cgroup: fix use-after-free in cgwb_release_workfn()
cgwb_release_workfn() calls css_put(wb->blkcg_css) and then later accesses
wb->blkcg_css again via blkcg_unpin_online(). If css_put() drops the last
reference, the blkcg can be freed asynchronously (css_free_rwork_fn ->
blkcg_css_free -> kfree) before blkcg_unpin_online() dereferences the
pointer to access blkcg->online_pin, resulting in a use-after-free:
BUG: KASAN: slab-use-after-free in blkcg_unpin_online (./include/linux/instrumented.h:112 ./include/linux/atomic/atomic-instrumented.h:400 ./include/linux/refcount.h:389 ./include/linux/refcount.h:432 ./include/linux/refcount.h:450 block/blk-cgroup.c:1367)
Write of size 4 at addr ff11000117aa6160 by task kworker/71:1/531
Workqueue: cgwb_release cgwb_release_workfn
Call Trace:
<TASK>
blkcg_unpin_online (./include/linux/instrumented.h:112 ./include/linux/atomic/atomic-instrumented.h:400 ./include/linux/refcount.h:389 ./include/linux/refcount.h:432 ./include/linux/refcount.h:450 block/blk-cgroup.c:1367)
cgwb_release_workfn (mm/backing-dev.c:629)
process_scheduled_works (kernel/workqueue.c:3278 kernel/workqueue.c:3385)
Freed by task 1016:
kfree (./include/linux/kasan.h:235 mm/slub.c:2689 mm/slub.c:6246 mm/slub.c:6561)
css_free_rwork_fn (kernel/cgroup/cgroup.c:5542)
process_scheduled_works (kernel/workqueue.c:3302 kernel/workqueue.c:3385)
** Stack based on commit 66672af7a095 ("Add linux-next specific files
for 20260410")
I am seeing this crash sporadically in Meta fleet across multiple kernel
versions. A full reproducer is available at:
https://github.com/leitao/debug/blob/main/reproducers/repro_blkcg_uaf.sh
(The race window is narrow. To make it easily reproducible, inject a
msleep(100) between css_put() and blkcg_unpin_online() in
cgwb_release_workfn(). With that delay and a KASAN-enabled kernel, the
reproducer triggers the splat reliably in less than a second.)
Fix this by moving blkcg_unpin_online() before css_put(), so the
cgwb's CSS reference keeps the blkcg alive while blkcg_unpin_online()
accesses it.
Published Apr 24, 2026 · Updated Aug 5, 2026
High · CVSS 7.8
In the Linux kernel, the following vulnerability has been resolved:
media: mediatek: vcodec: fix use-after-free in encoder release path
The fops_vcodec_release() function frees the context structure (ctx)
without first cancelling any pending or running work in ctx->encode_work.
This creates a race window where the workqueue handler (mtk_venc_worker)
may still be accessing the context memory after it has been freed.
Race condition:
CPU 0 (release path) CPU 1 (workqueue)
--------------------- ------------------
fops_vcodec_release()
v4l2_m2m_ctx_release()
v4l2_m2m_cancel_job()
// waits for m2m job "done"
mtk_venc_worker()
v4l2_m2m_job_finish()
// m2m job "done"
// BUT worker still running!
// post-job_finish access:
other ctx dereferences
// UAF if ctx already freed
// returns (job "done")
kfree(ctx) // ctx freed
Root cause: The v4l2_m2m_ctx_release() only waits for the m2m job
lifecycle (via TRANS_RUNNING flag), not the workqueue lifecycle.
After v4l2_m2m_job_finish() is called, the m2m framework considers
the job complete and v4l2_m2m_ctx_release() returns, but the worker
function continues executing and may still access ctx.
The work is queued during encode operations via:
queue_work(ctx->dev->encode_workqueue, &ctx->encode_work)
The worker function accesses ctx->m2m_ctx, ctx->dev, and other ctx
fields even after calling v4l2_m2m_job_finish().
This vulnerability was confirmed with KASAN by running an instrumented
test module that widens the post-job_finish race window. KASAN detected:
BUG: KASAN: slab-use-after-free in mtk_venc_worker+0x159/0x180
Read of size 4 at addr ffff88800326e000 by task kworker/u8:0/12
Workqueue: mtk_vcodec_enc_wq mtk_venc_worker
Allocated by task 47:
__kasan_kmalloc+0x7f/0x90
fops_vcodec_open+0x85/0x1a0
Freed by task 47:
__kasan_slab_free+0x43/0x70
kfree+0xee/0x3a0
fops_vcodec_release+0xb7/0x190
Fix this by calling cancel_work_sync(&ctx->encode_work) before kfree(ctx).
This ensures the workqueue handler is both cancelled (if pending) and
synchronized (waits for any running handler to complete) before the
context is freed.
Placement rationale: The fix is placed after v4l2_ctrl_handler_free()
and before list_del_init(&ctx->list). At this point, all m2m operations
are done (v4l2_m2m_ctx_release() has returned), and we need to ensure
the workqueue is synchronized before removing ctx from the list and
freeing it.
Note: The open error path does NOT need cancel_work_sync() because
INIT_WORK() only initializes the work structure - it does not schedule
it. Work is only scheduled later during device_run() operations.
Published Apr 24, 2026 · Updated Aug 5, 2026
High · CVSS 8.8
In the Linux kernel, the following vulnerability has been resolved:
can: gw: fix OOB heap access in cgw_csum_crc8_rel()
cgw_csum_crc8_rel() correctly computes bounds-safe indices via calc_idx():
int from = calc_idx(crc8->from_idx, cf->len);
int to = calc_idx(crc8->to_idx, cf->len);
int res = calc_idx(crc8->result_idx, cf->len);
if (from < 0 || to < 0 || res < 0)
return;
However, the loop and the result write then use the raw s8 fields directly
instead of the computed variables:
for (i = crc8->from_idx; ...) /* BUG: raw negative index */
cf->data[crc8->result_idx] = ...; /* BUG: raw negative index */
With from_idx = to_idx = result_idx = -64 on a 64-byte CAN FD frame,
calc_idx(-64, 64) = 0 so the guard passes, but the loop iterates with
i = -64, reading cf->data[-64], and the write goes to cf->data[-64].
This write might end up to 56 (7.0-rc) or 40 (<= 6.19) bytes before the
start of the canfd_frame on the heap.
The companion function cgw_csum_xor_rel() uses `from`/`to`/`res`
correctly throughout; fix cgw_csum_crc8_rel() to match.
Confirmed with KASAN on linux-7.0-rc2:
BUG: KASAN: slab-out-of-bounds in cgw_csum_crc8_rel+0x515/0x5b0
Read of size 1 at addr ffff8880076619c8 by task poc_cgw_oob/62
To configure the can-gw crc8 checksums CAP_NET_ADMIN is needed.
Published Apr 24, 2026 · Updated Aug 5, 2026
High · CVSS 7.3
In the Linux kernel, the following vulnerability has been resolved:
LoongArch: KVM: Handle the case that EIOINTC's coremap is empty
EIOINTC's coremap in eiointc_update_sw_coremap() can be empty, currently
we get a cpuid with -1 in this case, but we actually need 0 because it's
similar as the case that cpuid >= 4.
This fix an out-of-bounds access to kvm_arch::phyid_map::phys_map[].
Published Apr 24, 2026 · Updated Aug 5, 2026
High · CVSS 7.8
In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: Fix fence put before wait in amdgpu_amdkfd_submit_ib
amdgpu_amdkfd_submit_ib() submits a GPU job and gets a fence
from amdgpu_ib_schedule(). This fence is used to wait for job
completion.
Currently, the code drops the fence reference using dma_fence_put()
before calling dma_fence_wait().
If dma_fence_put() releases the last reference, the fence may be
freed before dma_fence_wait() is called. This can lead to a
use-after-free.
Fix this by waiting on the fence first and releasing the reference
only after dma_fence_wait() completes.
Fixes the below:
drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd.c:697 amdgpu_amdkfd_submit_ib() warn: passing freed memory 'f' (line 696)
(cherry picked from commit 8b9e5259adc385b61a6590a13b82ae0ac2bd3482)
Published Apr 24, 2026 · Updated Aug 5, 2026
High · CVSS 8.8
In the Linux kernel, the following vulnerability has been resolved:
LoongArch: KVM: Make kvm_get_vcpu_by_cpuid() more robust
kvm_get_vcpu_by_cpuid() takes a cpuid parameter whose type is int, so
cpuid can be negative. Let kvm_get_vcpu_by_cpuid() return NULL for this
case so as to make it more robust.
This fix an out-of-bounds access to kvm_arch::phyid_map::phys_map[].
Published Apr 24, 2026 · Updated Aug 5, 2026
High · CVSS 7.5
In the Linux kernel, the following vulnerability has been resolved:
nvmet: move async event work off nvmet-wq
For target nvmet_ctrl_free() flushes ctrl->async_event_work.
If nvmet_ctrl_free() runs on nvmet-wq, the flush re-enters workqueue
completion for the same worker:-
A. Async event work queued on nvmet-wq (prior to disconnect):
nvmet_execute_async_event()
queue_work(nvmet_wq, &ctrl->async_event_work)
nvmet_add_async_event()
queue_work(nvmet_wq, &ctrl->async_event_work)
B. Full pre-work chain (RDMA CM path):
nvmet_rdma_cm_handler()
nvmet_rdma_queue_disconnect()
__nvmet_rdma_queue_disconnect()
queue_work(nvmet_wq, &queue->release_work)
process_one_work()
lock((wq_completion)nvmet-wq) <--------- 1st
nvmet_rdma_release_queue_work()
C. Recursive path (same worker):
nvmet_rdma_release_queue_work()
nvmet_rdma_free_queue()
nvmet_sq_destroy()
nvmet_ctrl_put()
nvmet_ctrl_free()
flush_work(&ctrl->async_event_work)
__flush_work()
touch_wq_lockdep_map()
lock((wq_completion)nvmet-wq) <--------- 2nd
Lockdep splat:
============================================
WARNING: possible recursive locking detected
6.19.0-rc3nvme+ #14 Tainted: G N
--------------------------------------------
kworker/u192:42/44933 is trying to acquire lock:
ffff888118a00948 ((wq_completion)nvmet-wq){+.+.}-{0:0}, at: touch_wq_lockdep_map+0x26/0x90
but task is already holding lock:
ffff888118a00948 ((wq_completion)nvmet-wq){+.+.}-{0:0}, at: process_one_work+0x53e/0x660
3 locks held by kworker/u192:42/44933:
#0: ffff888118a00948 ((wq_completion)nvmet-wq){+.+.}-{0:0}, at: process_one_work+0x53e/0x660
#1: ffffc9000e6cbe28 ((work_completion)(&queue->release_work)){+.+.}-{0:0}, at: process_one_work+0x1c5/0x660
#2: ffffffff82d4db60 (rcu_read_lock){....}-{1:3}, at: __flush_work+0x62/0x530
Workqueue: nvmet-wq nvmet_rdma_release_queue_work [nvmet_rdma]
Call Trace:
__flush_work+0x268/0x530
nvmet_ctrl_free+0x140/0x310 [nvmet]
nvmet_cq_put+0x74/0x90 [nvmet]
nvmet_rdma_free_queue+0x23/0xe0 [nvmet_rdma]
nvmet_rdma_release_queue_work+0x19/0x50 [nvmet_rdma]
process_one_work+0x206/0x660
worker_thread+0x184/0x320
kthread+0x10c/0x240
ret_from_fork+0x319/0x390
Move async event work to a dedicated nvmet-aen-wq to avoid reentrant
flush on nvmet-wq.
Published Apr 24, 2026 · Updated Aug 5, 2026
High · CVSS 7.8
In the Linux kernel, the following vulnerability has been resolved:
futex: Require sys_futex_requeue() to have identical flags
Nicholas reported that his LLM found it was possible to create a UaF
when sys_futex_requeue() is used with different flags. The initial
motivation for allowing different flags was the variable sized futex,
but since that hasn't been merged (yet), simply mandate the flags are
identical, as is the case for the old style sys_futex() requeue
operations.
Published Apr 24, 2026 · Updated Aug 5, 2026
High · CVSS 8.8
In the Linux kernel, the following vulnerability has been resolved:
KVM: arm64: Fix the descriptor address in __kvm_at_swap_desc()
Using "(u64 __user *)hva + offset" to get the virtual addresses of S1/S2
descriptors looks really wrong, if offset is not zero. What we want to get
for swapping is hva + offset, not hva + offset*8. ;-)
Fix it.
Published Apr 24, 2026 · Updated Aug 5, 2026
High · CVSS 7.5
In the Linux kernel, the following vulnerability has been resolved:
wifi: wlcore: Return -ENOMEM instead of -EAGAIN if there is not enough headroom
Since upstream commit e75665dd0968 ("wifi: wlcore: ensure skb headroom
before skb_push"), wl1271_tx_allocate() and with it
wl1271_prepare_tx_frame() returns -EAGAIN if pskb_expand_head() fails.
However, in wlcore_tx_work_locked(), a return value of -EAGAIN from
wl1271_prepare_tx_frame() is interpreted as the aggregation buffer being
full. This causes the code to flush the buffer, put the skb back at the
head of the queue, and immediately retry the same skb in a tight while
loop.
Because wlcore_tx_work_locked() holds wl->mutex, and the retry happens
immediately with GFP_ATOMIC, this will result in an infinite loop and a
CPU soft lockup. Return -ENOMEM instead so the packet is dropped and
the loop terminates.
The problem was found by an experimental code review agent based on
gemini-3.1-pro while reviewing backports into v6.18.y.
Published Apr 24, 2026 · Updated Aug 5, 2026
High · CVSS 7.8
In the Linux kernel, the following vulnerability has been resolved:
wifi: cfg80211: cancel pmsr_free_wk in cfg80211_pmsr_wdev_down
When the nl80211 socket that originated a PMSR request is
closed, cfg80211_release_pmsr() sets the request's nl_portid
to zero and schedules pmsr_free_wk to process the abort
asynchronously. If the interface is concurrently torn down
before that work runs, cfg80211_pmsr_wdev_down() calls
cfg80211_pmsr_process_abort() directly. However, the already-
scheduled pmsr_free_wk work item remains pending and may run
after the interface has been removed from the driver. This
could cause the driver's abort_pmsr callback to operate on a
torn-down interface, leading to undefined behavior and
potential crashes.
Cancel pmsr_free_wk synchronously in cfg80211_pmsr_wdev_down()
before calling cfg80211_pmsr_process_abort(). This ensures any
pending or in-progress work is drained before interface teardown
proceeds, preventing the work from invoking the driver abort
callback after the interface is gone.
Published Apr 24, 2026 · Updated Aug 5, 2026
High · CVSS 7.5
In the Linux kernel, the following vulnerability has been resolved:
smb: smbdirect: introduce smbdirect_socket.recv_io.credits.available
The logic off managing recv credits by counting posted recv_io and
granted credits is racy.
That's because the peer might already consumed a credit,
but between receiving the incoming recv at the hardware
and processing the completion in the 'recv_done' functions
we likely have a window where we grant credits, which
don't really exist.
So we better have a decicated counter for the
available credits, which will be incremented
when we posted new recv buffers and drained when
we grant the credits to the peer.
Published Apr 24, 2026 · Updated Aug 5, 2026
High · CVSS 7.5
In the Linux kernel, the following vulnerability has been resolved:
smb: server: make use of smbdirect_socket.recv_io.credits.available
The logic off managing recv credits by counting posted recv_io and
granted credits is racy.
That's because the peer might already consumed a credit,
but between receiving the incoming recv at the hardware
and processing the completion in the 'recv_done' functions
we likely have a window where we grant credits, which
don't really exist.
So we better have a decicated counter for the
available credits, which will be incremented
when we posted new recv buffers and drained when
we grant the credits to the peer.
This fixes regression Namjae reported with
the 6.18 release.
Published Apr 24, 2026 · Updated Aug 5, 2026
Critical · CVSS 9.8
In the Linux kernel, the following vulnerability has been resolved:
smb: server: let send_done handle a completion without IB_SEND_SIGNALED
With smbdirect_send_batch processing we likely have requests without
IB_SEND_SIGNALED, which will be destroyed in the final request
that has IB_SEND_SIGNALED set.
If the connection is broken all requests are signaled
even without explicit IB_SEND_SIGNALED.
Published Apr 24, 2026 · Updated Aug 5, 2026
Critical · CVSS 9.8
In the Linux kernel, the following vulnerability has been resolved:
net/tls: fix use-after-free in -EBUSY error path of tls_do_encryption
The -EBUSY handling in tls_do_encryption(), introduced by commit
859054147318 ("net: tls: handle backlogging of crypto requests"), has
a use-after-free due to double cleanup of encrypt_pending and the
scatterlist entry.
When crypto_aead_encrypt() returns -EBUSY, the request is enqueued to
the cryptd backlog and the async callback tls_encrypt_done() will be
invoked upon completion. That callback unconditionally restores the
scatterlist entry (sge->offset, sge->length) and decrements
ctx->encrypt_pending. However, if tls_encrypt_async_wait() returns an
error, the synchronous error path in tls_do_encryption() performs the
same cleanup again, double-decrementing encrypt_pending and
double-restoring the scatterlist.
The double-decrement corrupts the encrypt_pending sentinel (initialized
to 1), making tls_encrypt_async_wait() permanently skip the wait for
pending async callbacks. A subsequent sendmsg can then free the
tls_rec via bpf_exec_tx_verdict() while a cryptd callback is still
pending, resulting in a use-after-free when the callback fires on the
freed record.
Fix this by skipping the synchronous cleanup when the -EBUSY async
wait returns an error, since the callback has already handled
encrypt_pending and sge restoration.
Published Apr 23, 2026 · Updated Aug 5, 2026
High · CVSS 7.8
In the Linux kernel, the following vulnerability has been resolved:
can: raw: fix ro->uniq use-after-free in raw_rcv()
raw_release() unregisters raw CAN receive filters via can_rx_unregister(),
but receiver deletion is deferred with call_rcu(). This leaves a window
where raw_rcv() may still be running in an RCU read-side critical section
after raw_release() frees ro->uniq, leading to a use-after-free of the
percpu uniq storage.
Move free_percpu(ro->uniq) out of raw_release() and into a raw-specific
socket destructor. can_rx_unregister() takes an extra reference to the
socket and only drops it from the RCU callback, so freeing uniq from
sk_destruct ensures the percpu area is not released until the relevant
callbacks have drained.
[mkl: applied manually]
Published Apr 23, 2026 · Updated Aug 5, 2026
High · CVSS 7.8
In the Linux kernel, the following vulnerability has been resolved:
perf: Make sure to use pmu_ctx->pmu for groups
Oliver reported that x86_pmu_del() ended up doing an out-of-bound memory access
when group_sched_in() fails and needs to roll back.
This *should* be handled by the transaction callbacks, but he found that when
the group leader is a software event, the transaction handlers of the wrong PMU
are used. Despite the move_group case in perf_event_open() and group_sched_in()
using pmu_ctx->pmu.
Turns out, inherit uses event->pmu to clone the events, effectively undoing the
move_group case for all inherited contexts. Fix this by also making inherit use
pmu_ctx->pmu, ensuring all inherited counters end up in the same pmu context.
Similarly, __perf_event_read() should use equally use pmu_ctx->pmu for the
group case.
Published Apr 22, 2026 · Updated Aug 5, 2026
High · CVSS 7.8
In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix undefined behavior in interpreter sdiv/smod for INT_MIN
The BPF interpreter's signed 32-bit division and modulo handlers use
the kernel abs() macro on s32 operands. The abs() macro documentation
(include/linux/math.h) explicitly states the result is undefined when
the input is the type minimum. When DST contains S32_MIN (0x80000000),
abs((s32)DST) triggers undefined behavior and returns S32_MIN unchanged
on arm64/x86. This value is then sign-extended to u64 as
0xFFFFFFFF80000000, causing do_div() to compute the wrong result.
The verifier's abstract interpretation (scalar32_min_max_sdiv) computes
the mathematically correct result for range tracking, creating a
verifier/interpreter mismatch that can be exploited for out-of-bounds
map value access.
Introduce abs_s32() which handles S32_MIN correctly by casting to u32
before negating, avoiding signed overflow entirely. Replace all 8
abs((s32)...) call sites in the interpreter's sdiv32/smod32 handlers.
s32 is the only affected case -- the s64 division/modulo handlers do
not use abs().
Published Apr 22, 2026 · Updated Aug 5, 2026
High · CVSS 7.8
In the Linux kernel, the following vulnerability has been resolved:
xfrm: prevent policy_hthresh.work from racing with netns teardown
A XFRM_MSG_NEWSPDINFO request can queue the per-net work item
policy_hthresh.work onto the system workqueue.
The queued callback, xfrm_hash_rebuild(), retrieves the enclosing
struct net via container_of(). If the net namespace is torn down
before that work runs, the associated struct net may already have
been freed, and xfrm_hash_rebuild() may then dereference stale memory.
xfrm_policy_fini() already flushes policy_hash_work during teardown,
but it does not synchronize policy_hthresh.work.
Synchronize policy_hthresh.work in xfrm_policy_fini() as well, so the
queued work cannot outlive the net namespace teardown and access a
freed struct net.
Published Apr 22, 2026 · Updated Aug 5, 2026
High · CVSS 8.1
In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: L2CAP: Fix stack-out-of-bounds read in l2cap_ecred_conn_req
Syzbot reported a KASAN stack-out-of-bounds read in l2cap_build_cmd()
that is triggered by a malformed Enhanced Credit Based Connection Request.
The vulnerability stems from l2cap_ecred_conn_req(). The function allocates
a local stack buffer (`pdu`) designed to hold a maximum of 5 Source Channel
IDs (SCIDs), totaling 18 bytes. When an attacker sends a request with more
than 5 SCIDs, the function calculates `rsp_len` based on this unvalidated
`cmd_len` before checking if the number of SCIDs exceeds
L2CAP_ECRED_MAX_CID.
If the SCID count is too high, the function correctly jumps to the
`response` label to reject the packet, but `rsp_len` retains the
attacker's oversized value. Consequently, l2cap_send_cmd() is instructed
to read past the end of the 18-byte `pdu` buffer, triggering a
KASAN panic.
Fix this by moving the assignment of `rsp_len` to after the `num_scid`
boundary check. If the packet is rejected, `rsp_len` will safely
remain 0, and the error response will only read the 8-byte base header
from the stack.
Published Apr 22, 2026 · Updated Aug 5, 2026
