Medium · CVSS 6.5
A vulnerability in the handling of internal resources necessary to bring up a large number of Layer 2 broadband remote access subscriber (BRAS) nodes in Juniper Networks Junos OS can cause the Access Node Control Protocol daemon (ANCPD) to crash and restart, leading to a Denial of Service (DoS) condition. Continued processing of spoofed subscriber nodes will create a sustained Denial of Service (DoS) condition. When the number of subscribers attempting to connect exceeds the configured maximum-discovery-table-entries value, the subscriber fails to map to an internal neighbor entry, causing the ANCPD process to crash. This issue affects Juniper Networks Junos OS: All versions prior to 17.3R3-S12; 17.4 versions prior to 17.4R2-S13; 18.1 versions prior to 18.1R3-S13; 18.2 versions prior to 18.2R3-S8; 18.3 versions prior to 18.3R3-S5; 18.4 versions prior to 18.4R1-S8, 18.4R3-S8; 19.1 versions prior to 19.1R3-S4; 19.2 versions prior to 19.2R3-S2; 19.3 versions prior to 19.3R3-S1; 19.4 versions prior to 19.4R3-S1; 20.1 versions prior to 20.1R2; 20.2 versions prior to 20.2R2; 20.3 versions prior to 20.3R2.
Published Apr 22, 2021 · Updated Sep 16, 2024
Medium · CVSS 5.9
A Data Processing vulnerability in the Multi-Service process (multi-svcs) on the FPC of Juniper Networks Junos OS on the PTX Series routers may lead to the process becoming unresponsive, ultimately affecting traffic forwarding, allowing an attacker to cause a Denial of Service (DoS) condition . The Multi-Service Process running on the FPC is responsible for handling sampling-related operations when a J-Flow configuration is activated. This can occur during periods of heavy route churn, causing the Multi-Service Process to stop processing updates, without consuming any further updates from kernel. This back pressure towards the kernel affects further dynamic updates from other processes in the system, including RPD, causing a KRT-STUCK condition and traffic forwarding issues. An administrator can monitor the following command to check if there is the KRT queue is stuck: user@device > show krt state ... Number of async queue entries: 65007 <--- this value keep on increasing. The following logs/alarms will be observed when this condition exists: user@junos> show chassis alarms 2 alarms currently active Alarm time Class Description 2020-10-11 04:33:45 PDT Minor Potential slow peers are: MSP(FPC1-PIC0) MSP(FPC3-PIC0) MSP(FPC4-PIC0) Logs: Oct 11 04:33:44.672 2020 test /kernel: rts_peer_cp_recv_timeout : Bit set for msp8 as it is stuck Oct 11 04:35:56.000 2020 test-lab fpc4 user.err gldfpc-multi-svcs.elf: Error in parsing composite nexthop Oct 11 04:35:56.000 2020 test-lab fpc4 user.err gldfpc-multi-svcs.elf: composite nexthop parsing error Oct 11 04:43:05 2020 test /kernel: rt_pfe_veto: Possible slowest client is msp38. States processed - 65865741. States to be processed - 0 Oct 11 04:55:55 2020 test /kernel: rt_pfe_veto: Memory usage of M_RTNEXTHOP type = (0) Max size possible for M_RTNEXTHOP type = (8311787520) Current delayed unref = (60000), Current unique delayed unref = (10896), Max delayed unref on this platform = (40000) Current delayed weight unref = (71426) Max delayed weight unref on this platform= (400000) curproc = rpd Oct 11 04:56:00 2020 test /kernel: rt_pfe_veto: Too many delayed route/nexthop unrefs. Op 2 err 55, rtsm_id 5:-1, msg type 2 This issue only affects PTX Series devices. No other products or platforms are affected by this vulnerability. This issue affects Juniper Networks Junos OS on PTX Series: 18.2 versions prior to 18.2R3-S7; 18.3 versions prior to 18.3R3-S4; 18.4 versions prior to 18.4R2-S8, 18.4R3-S7; 19.1 versions prior to 19.1R3-S4; 19.2 versions prior to 19.2R3-S1; 19.3 versions prior to 19.3R3-S1; 19.4 versions prior to 19.4R2-S4, 19.4R3-S1; 20.1 versions prior to 20.1R2; 20.2 versions prior to 20.2R2; 20.3 versions prior to 20.3R1-S2, 20.3R2. This issue does not affect Juniper Networks Junos OS versions prior to 18.2R1.
Published Apr 22, 2021 · Updated Sep 16, 2024
High · CVSS 8.7
Eaton Intelligent Power Manager (IPM) prior to 1.69 is vulnerable to authenticated arbitrary file delete vulnerability induced due to improper input validation at server/maps_srv.js with action removeBackground and server/node_upgrade_srv.js with action removeFirmware. An attacker can send specially crafted packets to delete the files on the system where IPM software is installed.
Published Apr 13, 2021 · Updated Sep 16, 2024
Critical · CVSS 9.8
A buffer size validation vulnerability in the overlayd service of Juniper Networks Junos OS may allow an unauthenticated remote attacker to send specially crafted packets to the device, triggering a partial Denial of Service (DoS) condition, or leading to remote code execution (RCE). Continued receipt and processing of these packets will sustain the partial DoS. The overlayd daemon handles Overlay OAM packets, such as ping and traceroute, sent to the overlay. The service runs as root by default and listens for UDP connections on port 4789. This issue results from improper buffer size validation, which can lead to a buffer overflow. Unauthenticated attackers can send specially crafted packets to trigger this vulnerability, resulting in possible remote code execution. overlayd runs by default in MX Series, ACX Series, and QFX Series platforms. The SRX Series does not support VXLAN and is therefore not vulnerable to this issue. Other platforms are also vulnerable if a Virtual Extensible LAN (VXLAN) overlay network is configured. This issue affects Juniper Networks Junos OS: 15.1 versions prior to 15.1R7-S9; 17.3 versions prior to 17.3R3-S11; 17.4 versions prior to 17.4R2-S13, 17.4R3-S4; 18.1 versions prior to 18.1R3-S12; 18.2 versions prior to 18.2R2-S8, 18.2R3-S7; 18.3 versions prior to 18.3R3-S4; 18.4 versions prior to 18.4R1-S8, 18.4R2-S7, 18.4R3-S7; 19.1 versions prior to 19.1R2-S2, 19.1R3-S4; 19.2 versions prior to 19.2R1-S6, 19.2R3-S2; 19.3 versions prior to 19.3R3-S1; 19.4 versions prior to 19.4R2-S4, 19.4R3-S1; 20.1 versions prior to 20.1R2-S1, 20.1R3; 20.2 versions prior to 20.2R2, 20.2R2-S1, 20.2R3; 20.3 versions prior to 20.3R1-S1.
Published Apr 22, 2021 · Updated Sep 16, 2024
Medium · CVSS 6.5
It may be possible to have an extremely long aggregation pipeline in conjunction with a specific stage/operator and cause a stack overflow due to the size of the stack frames used by that stage. If an attacker could cause such an aggregation to occur, they could maliciously crash MongoDB in a DoS attack. This vulnerability affects MongoDB Server v4.4 versions prior to and including 4.4.28, MongoDB Server v5.0 versions prior to 5.0.4 and MongoDB Server v4.2 versions prior to 4.2.16.
Workaround: >= v4.2.16 users and all v4.4 users can add the --setParameter internalPipelineLengthLimit=50 instead of the default 1000 to mongod at startup to prevent a crash.
Published Apr 12, 2022 · Updated Sep 16, 2024
Medium · CVSS 5.9
Dell EMC iDRAC9 versions prior to 4.40.00.00 contain a stack-based overflow vulnerability. A remote authenticated attacker could potentially exploit this vulnerability to overwrite configuration information by injecting arbitrarily large payload.
Published Apr 30, 2021 · Updated Sep 16, 2024
High · CVSS 7.5
A vulnerability in the HTTP/HTTPS service used by J-Web, Web Authentication, Dynamic-VPN (DVPN), Firewall Authentication Pass-Through with Web-Redirect, and Captive Portal allows an unauthenticated attacker to cause an extended Denial of Service (DoS) for these services by sending a high number of specific requests. This issue affects: Juniper Networks Junos OS 12.3 versions prior to 12.3R12-S17 on EX Series; 12.3X48 versions prior to 12.3X48-D105 on SRX Series; 15.1 versions prior to 15.1R7-S8; 15.1X49 versions prior to 15.1X49-D230 on SRX Series; 16.1 versions prior to 16.1R7-S8; 17.4 versions prior to 17.4R2-S12, 17.4R3-S3; 18.1 versions prior to 18.1R3-S11; 18.2 versions prior to 18.2R3-S6; 18.3 versions prior to 18.3R2-S4, 18.3R3-S3; 18.4 versions prior to 18.4R2-S5, 18.4R3-S4; 19.1 versions prior to 19.1R2-S2, 19.1R3-S2; 19.2 versions prior to 19.2R1-S5, 19.2R3; 19.3 versions prior to 19.3R2-S4, 19.3R3; 19.4 versions prior to 19.4R1-S3, 19.4R2-S2, 19.4R3; 20.1 versions prior to 20.1R1-S3, 20.1R2; 20.2 versions prior to 20.2R1-S1, 20.2R2.
Published Apr 22, 2021 · Updated Sep 16, 2024
Medium · CVSS 5.4
IBM Cognos Analytics 11.1.7, 11.2.0, and 11.1.7 is vulnerable to cross-site scripting, caused by improper validation of user-supplied input. A remote attacker could exploit this vulnerability to inject malicious script into a Web page which would be executed in a victim's Web browser within the security context of the hosting Web site, once the URL is clicked. An attacker could use this vulnerability to steal the victim's cookie-based authentication credentials. IBM X-Force ID: 209691.
Published Apr 22, 2022 · Updated Sep 16, 2024
High · CVSS 7.4
A signal handler race condition exists in the Layer 2 Address Learning Daemon (L2ALD) of Juniper Networks Junos OS due to the absence of a specific protection mechanism to avoid a race condition which may allow an attacker to bypass the storm-control feature on devices. This issue is a corner case and only occurs during specific actions taken by an administrator of a device under certain specifics actions which triggers the event. The event occurs less frequently on devices which are not configured with Virtual Chassis configurations, and more frequently on devices configured in Virtual Chassis configurations. This issue is not specific to any particular Junos OS platform. An Indicator of Compromise (IoC) may be seen by reviewing log files for the following error message seen by executing the following show statement: show log messages | grep storm Result to look for: /kernel: GENCFG: op 58 (Storm Control Blob) failed; err 1 (Unknown) This issue affects: Juniper Networks Junos OS: 14.1X53 versions prior to 14.1X53-D49 on EX Series; 15.1 versions prior to 15.1R7-S6; 15.1X49 versions prior to 15.1X49-D191, 15.1X49-D200 on SRX Series; 16.1 versions prior to 16.1R7-S7; 16.2 versions prior to 16.2R2-S11, 16.2R3; 17.1 versions prior to 17.1R2-S11, 17.1R3; 17.2 versions prior to 17.2R2-S8, 17.2R3-S3; 17.3 versions prior to 17.3R2-S5, 17.3R3-S7; 17.4 versions prior to 17.4R2-S9, 17.4R3; 18.1 versions prior to 18.1R3-S5; 18.2 versions prior to 18.2R2-S6, 18.2R3; 18.3 versions prior to 18.3R1-S7, 18.3R2-S3, 18.3R3; 18.4 versions prior to 18.4R1-S5, 18.4R2; 19.1 versions prior to 19.1R1-S4, 19.1R2.
Published Apr 22, 2021 · Updated Sep 16, 2024
Critical · CVSS 9.8
In Bender/ebee Charge Controllers in multiple versions are prone to Hardcoded Credentials. Bender charge controller CC612 in version 5.20.1 and below is prone to hardcoded ssh credentials. An attacker may use the password to gain administrative access to the web-UI.
Published Apr 27, 2022 · Updated Sep 16, 2024
Medium · CVSS 4.8
Dell EMC iDRAC9 versions prior to 4.40.00.00 contain multiple stored cross-site scripting vulnerabilities. A remote authenticated malicious user with high privileges could potentially exploit these vulnerabilities to store malicious HTML or JavaScript code through multiple affected parameters. When victim users access the submitted data through their browsers, the malicious code gets executed by the web browser in the context of the vulnerable application.
Published Apr 30, 2021 · Updated Sep 16, 2024
Medium · CVSS 4.9
The Firmware protocol configuration function in ASUS BMC’s firmware Web management page does not verify the string length entered by users, resulting in a Buffer overflow vulnerability. As obtaining the privileged permission, remote attackers use the leakage to abnormally terminate the Web service.
Published Apr 6, 2021 · Updated Sep 16, 2024
High · CVSS 7.4
IBM Spectrum Protect Client 8.1.0.0 through 8.1.11.0 could allow a local user to escalate their privileges to take full control of the system due to insecure directory permissions. IBM X-Force ID: 198811.
Published Apr 26, 2021 · Updated Sep 16, 2024
Medium · CVSS 6.2
IBM Spectrum Protect Client 8.1.0.0 through 8.1.11.0 is vulnerable to a stack-based buffer overflow, caused by improper bounds checking. A local attacker could overflow a buffer and cause the application to crash. IBM X-Force ID: 198934
Published Apr 26, 2021 · Updated Sep 16, 2024
Medium · CVSS 6.5
Due to an improper check for unusual or exceptional conditions in Juniper Networks Junos OS and Junos OS Evolved the Routing Protocol Daemon (RPD) service, upon receipt of a specific matching BGP packet meeting a specific term in the flowspec configuration, crashes and restarts causing a Denial of Service (DoS). Continued receipt and processing of this packet will create a sustained Denial of Service (DoS) condition. This issue affects only Multiprotocol BGP (MP-BGP) VPNv6 FlowSpec deployments. This issue affects: Juniper Networks Junos OS: 18.4 versions prior to 18.4R1-S8, 18.4R2-S7, 18.4R3-S7; 19.1 versions prior to 19.1R2-S2, 19.1R3-S4; 19.2 versions prior to 19.2R1-S6, 19.2R3-S2; 19.3 versions prior to 19.3R3-S2; 19.4 versions prior to 19.4R2-S4, 19.4R3-S1; 20.1 versions prior to 20.1R2, 20.1R3; 20.2 versions prior to 20.2R2, 20.2R3; 20.3 versions prior to 20.3R1-S1, 20.3R2. Juniper Networks Junos OS Evolved: All versions after 18.4R1-EVO prior to 20.3R2-EVO. This issue does not affect: Juniper Networks Junos OS versions prior to 18.4R1. Juniper Networks Junos OS Evolved versions prior to 18.4R1-EVO.
Published Apr 22, 2021 · Updated Sep 16, 2024
Medium · CVSS 4.4
IBM Spectrum Protect Server 7.1 and 8.1 is subject to a stack-based buffer overflow caused by improper bounds checking during the parsing of commands. By issuing such a command with an improper parameter, an authorized administrator could overflow a buffer and cause the server to crash. IBM X-Force ID: 197792.
Published Apr 16, 2021 · Updated Sep 16, 2024
High · CVSS 8.8
The Windows Installation component of TIBCO Software Inc.'s TIBCO Messaging - Eclipse Mosquitto Distribution - Bridge - Community Edition and TIBCO Messaging - Eclipse Mosquitto Distribution - Bridge - Enterprise Edition contains a vulnerability that theoretically allows a low privileged attacker with local access on some versions of the Windows operating system to insert malicious software. The affected component can be abused to execute the malicious software inserted by the attacker with the elevated privileges of the component. This vulnerability results from a lack of access restrictions on certain files and/or folders in the installation. Affected releases are TIBCO Software Inc.'s TIBCO Messaging - Eclipse Mosquitto Distribution - Bridge - Community Edition: versions 1.3.0 and below and TIBCO Messaging - Eclipse Mosquitto Distribution - Bridge - Enterprise Edition: versions 1.3.0 and below.
Published Apr 14, 2021 · Updated Sep 16, 2024
Medium · CVSS 5.6
The vulnerability exists due to insufficient validation of input from certain resources by the IPP software. The attacker would need access to the local Subnet and an administrator interaction to compromise the system. This issue affects: Intelligent Power Protector versions prior to 1.69.
Published Apr 1, 2022 · Updated Sep 16, 2024
Medium · CVSS 4.9
The LDAP configuration function in ASUS BMC’s firmware Web management page does not verify the string length entered by users, resulting in a Buffer overflow vulnerability. As obtaining the privileged permission, remote attackers use the leakage to abnormally terminate the Web service.
Published Apr 6, 2021 · Updated Sep 16, 2024
Medium · CVSS 4.9
The Firmware update function in ASUS BMC’s firmware Web management page does not verify the string length entered by users, resulting in a Buffer overflow vulnerability. As obtaining the privileged permission, remote attackers use the leakage to abnormally terminate the Web service.
Published Apr 6, 2021 · Updated Sep 16, 2024
Medium · CVSS 5.5
A sensitive information disclosure vulnerability in the mosquitto message broker of Juniper Networks Junos OS may allow a locally authenticated user with shell access the ability to read portions of sensitive files, such as the master.passwd file. Since mosquitto is shipped with setuid permissions enabled and is owned by the root user, this vulnerability may allow a local privileged user the ability to run mosquitto with root privileges and access sensitive information stored on the local filesystem. This issue affects Juniper Networks Junos OS: 17.3 versions prior to 17.3R3-S12, 17.4 versions prior to 17.4R3-S4; 18.1 versions prior to 18.1R3-S12; 18.3 versions prior to 18.3R3-S4; 19.1 versions prior to 19.1R3-S4; 19.3 versions prior to 19.3R3-S1, 19.3R3-S2; 19.4 versions prior to 19.4R2-S3; 20.1 versions prior to 20.1R2; 20.2 versions prior to 20.2R1-S3, 20.2R2, 20.2R3.
Published Apr 22, 2021 · Updated Sep 16, 2024
Medium · CVSS 4.9
The Active Directory configuration function in ASUS BMC’s firmware Web management page does not verify the string length entered by users, resulting in a Buffer overflow vulnerability. As obtaining the privileged permission, remote attackers use the leakage to abnormally terminate the Web service.
Published Apr 6, 2021 · Updated Sep 16, 2024
Medium · CVSS 4.4
All versions of package mongo-express are vulnerable to Denial of Service (DoS) when exporting an empty collection as CSV, due to an unhandled exception, leading to a crash.
Published Apr 13, 2021 · Updated Sep 16, 2024
Medium · CVSS 4.9
The specific function in ASUS BMC’s firmware Web management page (Generate SSL certificate function) does not verify the string length entered by users, resulting in a Buffer overflow vulnerability. As obtaining the privileged permission, remote attackers use the leakage to abnormally terminate the Web service.
Published Apr 6, 2021 · Updated Sep 16, 2024
High · CVSS 7.5
On PTX Series and QFX10k Series devices with the "inline-jflow" feature enabled, a use after free weakness in the Packet Forwarding Engine (PFE) microkernel architecture of Juniper Networks Junos OS may allow an attacker to cause a Denial of Service (DoS) condition whereby one or more Flexible PIC Concentrators (FPCs) may restart. As this is a race condition situation this issue become more likely to be hit when network instability occurs, such as but not limited to BGP/IGP reconvergences, and/or further likely to occur when more active "traffic flows" are occurring through the device. When this issue occurs, it will cause one or more FPCs to restart unexpectedly. During FPC restarts core files will be generated. While the core file is generated traffic will be disrupted. Sustained receipt of large traffic flows and reconvergence-like situations may sustain the Denial of Service (DoS) situation. This issue affects: Juniper Networks Junos OS: 18.1 version 18.1R2 and later versions prior to 18.1R3-S10 on PTX Series, QFX10K Series.
Published Apr 22, 2021 · Updated Sep 16, 2024
Medium · CVSS 6.7
A race condition in Linux kernel SCTP sockets (net/sctp/socket.c) before 5.12-rc8 can lead to kernel privilege escalation from the context of a network service or an unprivileged process. If sctp_destroy_sock is called without sock_net(sk)->sctp.addr_wq_lock then an element is removed from the auto_asconf_splist list without any proper locking. This can be exploited by an attacker with network service privileges to escalate to root or from the context of an unprivileged user directly if a BPF_CGROUP_INET_SOCK_CREATE is attached which denies creation of some SCTP socket.
Published Apr 22, 2021 · Updated Sep 16, 2024
Medium · CVSS 4.3
IBM QRadar SIEM 7.3, 7.4, and 7.5 allows for users to access information across tenant and domain boundaries in some situations. IBM X-Force ID: 208397.
Published Apr 27, 2022 · Updated Sep 16, 2024
Low · CVSS 3.1
IBM QRadar SIEM 7.3, 7.4, and 7.5 could allow an authenticated user to obtain sensitive information from another user's dashboard providing the dashboard ID of that user. IBM X-Force ID: 203030.
Published Apr 27, 2022 · Updated Sep 16, 2024
High · CVSS 8.6
A NULL Pointer Dereference vulnerability in the Captive Portal Content Delivery (CPCD) services daemon (cpcd) of Juniper Networks Junos OS on MX Series with MS-PIC, MS-SPC3, MS-MIC or MS-MPC allows an attacker to send malformed HTTP packets to the device thereby causing a Denial of Service (DoS), crashing the Multiservices PIC Management Daemon (mspmand) process thereby denying users the ability to login, while concurrently impacting other mspmand services and traffic through the device. Continued receipt and processing of these malformed packets will create a sustained Denial of Service (DoS) condition. While the Services PIC is restarting, all PIC services will be bypassed until the Services PIC completes its boot process. An attacker sending these malformed HTTP packets to the device who is not part of the Captive Portal experience is not able to exploit this issue. This issue is not applicable to MX RE-based CPCD platforms. This issue affects: Juniper Networks Junos OS on MX Series 17.3 version 17.3R1 and later versions prior to 17.4 versions 17.4R2-S9, 17.4R3-S2; 18.1 versions prior to 18.1R3-S9; 18.2 versions prior to 18.2R3-S3; 18.3 versions prior to 18.3R3-S1; 18.4 versions prior to 18.4R3; 19.1 versions prior to 19.1R2-S2, 19.1R3; 19.2 versions prior to 19.2R2; 19.3 versions prior to 19.3R3. This issue does not affect: Juniper Networks Junos OS versions prior to 17.3R1.
Published Apr 22, 2021 · Updated Sep 16, 2024
High · CVSS 7.6
The Administration GUI component of TIBCO Software Inc.'s TIBCO Administrator - Enterprise Edition, TIBCO Administrator - Enterprise Edition, TIBCO Administrator - Enterprise Edition Distribution for TIBCO Silver Fabric, TIBCO Administrator - Enterprise Edition Distribution for TIBCO Silver Fabric, TIBCO Administrator - Enterprise Edition for z/Linux, and TIBCO Administrator - Enterprise Edition for z/Linux contains an easily exploitable vulnerability that allows a low privileged attacker with network access to execute a SQL injection attack on the affected system. Affected releases are TIBCO Software Inc.'s TIBCO Administrator - Enterprise Edition: versions 5.10.2 and below, TIBCO Administrator - Enterprise Edition: versions 5.11.0 and 5.11.1, TIBCO Administrator - Enterprise Edition Distribution for TIBCO Silver Fabric: versions 5.10.2 and below, TIBCO Administrator - Enterprise Edition Distribution for TIBCO Silver Fabric: versions 5.11.0 and 5.11.1, TIBCO Administrator - Enterprise Edition for z/Linux: versions 5.10.2 and below, and TIBCO Administrator - Enterprise Edition for z/Linux: versions 5.11.0 and 5.11.1.
Published Apr 20, 2021 · Updated Sep 16, 2024
Low · CVSS 3.7
IBM QRadar SIEM 7.3, 7.4, and 7.5 stores potentially sensitive information in log files that could be read by an user with access to creating domains. IBM X-Force ID: 211037.
Published Apr 27, 2022 · Updated Sep 16, 2024
Low · CVSS 3.8
Advanced Authentication versions prior to 6.3 SP4 have a potential broken authentication due to improper session management issue.
Published Apr 12, 2021 · Updated Sep 16, 2024
Medium · CVSS 4.3
IBM WebSphere Application Server 7.0, 8.0, and 8.5 is vulnerable to server-side request forgery (SSRF). By sending a specially crafted request, a remote authenticated attacker could exploit this vulnerability to obtain sensitive data. IBM X-Force ID: 197502.
Published Apr 8, 2021 · Updated Sep 16, 2024
High · CVSS 8.3
Eaton Intelligent Power Manager (IPM) prior to 1.69 is vulnerable to unauthenticated eval injection vulnerability. The software does not neutralize code syntax from users before using in the dynamic evaluation call in loadUserFile function under scripts/libs/utils.js. Successful exploitation can allow attackers to control the input to the function and execute attacker controlled commands.
Published Apr 13, 2021 · Updated Sep 16, 2024
High · CVSS 8.8
a Improper Access Control vulnerability in SUSE Rancher allows users to keep privileges that should have been revoked. This issue affects: SUSE Rancher Rancher versions prior to 2.4.18; Rancher versions prior to 2.5.12; Rancher versions prior to 2.6.3.
Published Apr 1, 2022 · Updated Sep 16, 2024
Medium · CVSS 6.4
Dell EMC Unity, UnityVSA, and Unity XT versions prior to 5.0.7.0.5.008 contain a plain-text password storage vulnerability when the Dell Upgrade Readiness Utility is run on the system. The credentials of the Unisphere Administrator are stored in plain text. A local malicious user with high privileges may use the exposed password to gain access with the privileges of the compromised user.
Published Apr 30, 2021 · Updated Sep 16, 2024
High · CVSS 8.1
An unvalidated REST API in the AppFormix Agent of Juniper Networks AppFormix allows an unauthenticated remote attacker to execute commands as root on the host running the AppFormix Agent, when certain preconditions are performed by the attacker, thus granting the attacker full control over the environment. This issue affects: Juniper Networks AppFormix 3 versions prior to 3.1.22, 3.2.14, 3.3.0.
Published Apr 22, 2021 · Updated Sep 16, 2024
Medium · CVSS 6.7
IBM Informix Dynamic Server 14.10 is vulnerable to a stack based buffer overflow, caused by improper bounds checking. A local privileged user could overflow a buffer and execute arbitrary code on the system or cause a denial of service condition. IBM X-Force ID: 198366.
Published Apr 30, 2021 · Updated Sep 16, 2024
High · CVSS 7.5
On Juniper Networks SRX Series devices with link aggregation (lag) configured, executing any operation that fetches Aggregated Ethernet (AE) interface statistics, including but not limited to SNMP GET requests, causes a slow kernel memory leak. If all the available memory is consumed, the traffic will be impacted and a reboot might be required. The following log can be seen if this issue happens. /kernel: rt_pfe_veto: Memory over consumed. Op 1 err 12, rtsm_id 0:-1, msg type 72 /kernel: rt_pfe_veto: free kmem_map memory = (20770816) curproc = kmd An administrator can use the following CLI command to monitor the status of memory consumption (ifstat bucket): user@device > show system virtual-memory no-forwarding | match ifstat Type InUse MemUse HighUse Limit Requests Limit Limit Size(s) ifstat 2588977 162708K - 19633958 <<<< user@device > show system virtual-memory no-forwarding | match ifstat Type InUse MemUse HighUse Limit Requests Limit Limit Size(s) ifstat 3021629 189749K - 22914415 <<<< This issue affects Juniper Networks Junos OS on SRX Series: 17.1 versions 17.1R3 and above prior to 17.3R3-S11; 17.4 versions prior to 17.4R3-S5; 18.2 versions prior to 18.2R3-S7, 18.2R3-S8; 18.3 versions prior to 18.3R3-S4; 18.4 versions prior to 18.4R2-S7, 18.4R3-S6; 19.1 versions prior to 19.1R3-S4; 19.2 versions prior to 19.2R1-S6; 19.3 versions prior to 19.3R3-S1; 19.4 versions prior to 19.4R3-S1; 20.1 versions prior to 20.1R2, 20.1R3; 20.2 versions prior to 20.2R2-S2, 20.2R3; 20.3 versions prior to 20.3R1-S2, 20.3R2. This issue does not affect Juniper Networks Junos OS prior to 17.1R3.
Published Apr 22, 2021 · Updated Sep 16, 2024
High · CVSS 7.5
A vulnerability in Juniper Networks Junos OS ACX500 Series, ACX4000 Series, may allow an attacker to cause a Denial of Service (DoS) by sending a high rate of specific packets to the device, resulting in a Forwarding Engine Board (FFEB) crash. Continued receipt of these packets will sustain the Denial of Service (DoS) condition. This issue affects Juniper Networks Junos OS on ACX500 Series, ACX4000 Series: 17.4 versions prior to 17.4R3-S2.
Published Apr 22, 2021 · Updated Sep 16, 2024
Medium · CVSS 6.2
IBM Spectrum Protect Plus File Systems Agent 10.1.6 and 10.1.7 stores potentially sensitive information in log files that could be read by a local user. IBM X-Force ID: 198836.
Published Apr 26, 2021 · Updated Sep 16, 2024
Medium · CVSS 5.3
An uncontrolled resource consumption vulnerability in Message Queue Telemetry Transport (MQTT) server of Juniper Networks Junos OS allows an attacker to cause MQTT server to crash and restart leading to a Denial of Service (DoS) by sending a stream of specific packets. A Juniper Extension Toolkit (JET) application designed with a listening port uses the Message Queue Telemetry Transport (MQTT) protocol to connect to a mosquitto broker that is running on Junos OS to subscribe for events. Continued receipt and processing of this packet will create a sustained Denial of Service (DoS) condition. This issue affects Juniper Networks Junos OS: 16.1R1 and later versions prior to 17.3R3-S11; 17.4 versions prior to 17.4R2-S13, 17.4R3-S4; 18.1 versions prior to 18.1R3-S12; 18.2 versions prior to 18.2R2-S8, 18.2R3-S7; 18.3 versions prior to 18.3R3-S4; 18.4 versions prior to 18.4R1-S8, 18.4R2-S7, 18.4R3-S7; 19.1 versions prior to 19.1R3-S5; 19.2 versions prior to 19.2R1-S6, 19.2R3-S2; 19.3 versions prior to 19.3R3-S2; 19.4 versions prior to 19.4R2-S4, 19.4R3-S2; 20.1 versions prior to 20.1R2-S1, 20.1R3; 20.2 versions prior to 20.2R2-S2, 20.2R3; 20.3 versions prior to 20.3R1-S1, 20.3R2. This issue does not affect Juniper Networks Junos OS versions prior to 16.1R1.
Published Apr 22, 2021 · Updated Sep 16, 2024
High · CVSS 7.3
This affects all versions of package portkiller. If (attacker-controlled) user input is given, it is possible for an attacker to execute arbitrary commands. This is due to use of the child_process exec function without input sanitization.
Published Apr 18, 2021 · Updated Sep 16, 2024
High · CVSS 7.8
A Use of Hard-coded Credentials vulnerability in Juniper Networks Junos OS on Junos Fusion satellite devices allows an attacker who is local to the device to elevate their privileges and take control of the device. This issue affects: Juniper Networks Junos OS Junos Fusion Satellite Devices. 16.1 versions prior to 16.1R7-S7; 17.1 versions prior to 17.1R2-S12, 17.1R3-S2; 17.2 versions prior to 17.2R3-S4; 17.3 versions prior to 17.3R3-S8; 17.4 versions prior to 17.4R2-S10; 17.4 version 17.4R3 and later versions; 18.1 versions prior to 18.1R3-S10; 18.2 versions prior to 18.2R2-S7, 18.2R3-S3; 18.3 versions prior to 18.3R1-S7, 18.3R2-S4, 18.3R3-S2; 18.4 versions prior to 18.4R1-S6, 18.4R2-S4, 18.4R3-S1; 19.1 versions prior to 19.1R1-S5, 19.1R2-S1, 19.1R3; 19.2 versions prior to 19.2R1-S4, 19.2R2; 19.3 versions prior to 19.3R2-S5, 19.3R3; 19.4 versions prior to 19.4R1-S1, 19.4R2; 20.1 versions prior to 20.1R1-S1, 20.1R2. This issue does not affected Junos OS releases prior to 16.1R1 or all 19.2R3 and 19.4R3 release versions.
Published Apr 22, 2021 · Updated Sep 16, 2024
High · CVSS 7.3
Dell VNX2 for file version 8.1.21.266 and earlier, contain an unauthenticated remote code execution vulnerability which may lead unauthenticated users to execute commands on the system.
Published Apr 8, 2022 · Updated Sep 16, 2024
Medium · CVSS 6.2
Dell Hybrid Client versions prior to 1.5 contain an information exposure vulnerability. A local unauthenticated attacker may exploit this vulnerability in order to view and exfiltrate sensitive information on the system.
Published Apr 30, 2021 · Updated Sep 16, 2024
Medium · CVSS 6.5
In Juniper Networks Junos OS Evolved, receipt of a stream of specific genuine Layer 2 frames may cause the Advanced Forwarding Toolkit (AFT) manager process (Evo-aftmand), responsible for handling Route, Class-of-Service (CoS), Firewall operations within the packet forwarding engine (PFE) to crash and restart, leading to a Denial of Service (DoS) condition. By continuously sending this specific stream of genuine Layer 2 frames, an attacker can repeatedly crash the PFE, causing a sustained Denial of Service (DoS). This issue affects Juniper Networks Junos OS Evolved: All versions prior to 20.4R1-EVO. This issue does not affect Junos OS versions.
Published Apr 22, 2021 · Updated Sep 16, 2024
Medium · CVSS 5.5
A denial-of-service (DoS) vulnerability in Palo Alto Networks GlobalProtect app on Windows systems allows a limited Windows user to send specifically-crafted input to the GlobalProtect app that results in a Windows blue screen of death (BSOD) error. This issue impacts: GlobalProtect app 5.1 versions earlier than GlobalProtect app 5.1.8; GlobalProtect app 5.2 versions earlier than GlobalProtect app 5.2.4.
Published Apr 20, 2021 · Updated Sep 16, 2024
High · CVSS 7.4
Due to a vulnerability in DDoS protection in Juniper Networks Junos OS and Junos OS Evolved on QFX5K Series switches in a VXLAN configuration, instability might be experienced in the underlay network as a consequence of exceeding the default ddos-protection aggregate threshold. If an attacker on a client device on the overlay network sends a high volume of specific, legitimate traffic in the overlay network, due to an improperly detected DDoS violation, the leaf might not process certain L2 traffic, sent by spines in the underlay network. Continued receipt and processing of the high volume traffic will sustain the Denial of Service (DoS) condition. This issue affects: Juniper Networks Junos OS on QFX5K Series: 17.3 versions prior to 17.3R3-S11; 17.4 versions prior to 17.4R3-S5; 18.1 versions prior to 18.1R3-S13; 18.2 versions prior to 18.2R2-S8, 18.2R3-S8; 18.3 versions prior to 18.3R3-S5; 18.4 versions prior to 18.4R1-S8, 18.4R2-S6, 18.4R3-S6; 19.1 versions prior to 19.1R3-S4; 19.2 versions prior to 19.2R1-S6, 19.2R3-S2; 19.3 versions prior to 19.3R3-S2; 19.4 versions prior to 19.4R2-S4, 19.4R3-S1; 20.1 versions prior to 20.1R2; 20.2 versions prior to 20.2R2; 20.3 versions prior to 20.3R1-S2, 20.3R2. Juniper Networks Junos OS Evolved on QFX5220: All versions prior to 20.3R2-EVO.
Published Apr 22, 2021 · Updated Sep 16, 2024
High · CVSS 7.8
Dell Peripheral Manager 1.3.1 or greater contains remediation for a local privilege escalation vulnerability that could be potentially exploited to gain arbitrary code execution on the system with privileges of the system user.
Published Apr 12, 2021 · Updated Sep 16, 2024
