Browse CVE records published in April 2021, with severity, affected products, CWE, KEV, and source-backed vulnerability context.
Showing 50 of 2026 matching CVEs · Page 13 of 41.
A malicious 3rd party with local access to the Windows machine where MongoDB Compass is installed can execute arbitrary software with the privileges of the user who is running MongoDB Compass. This issue affects: MongoDB Inc. MongoDB Compass 1.x version 1.3.0 on Windows and later versions; 1.x versions prior to 1.25.0 on Windows.
Published Apr 6, 2021 · Updated Sep 17, 2024
IBM Spectrum Protect Client 8.1.0.0-8 through 1.11.0 is vulnerable to a stack-based buffer overflow, caused by improper bounds checking when processing the current locale settings. A local attacker could overflow a buffer and execute arbitrary code on the system with elevated privileges or cause the application to crash. IBM X-Force ID: 199479
Published Apr 26, 2021 · Updated Sep 17, 2024
On Juniper Networks MX Series and EX9200 Series platforms with Trio-based MPCs (Modular Port Concentrators) where Integrated Routing and Bridging (IRB) interfaces are configured and mapped to a VPLS instance or a Bridge-Domain, certain Layer 2 network events at Customer Edge (CE) devices may cause memory leaks in the MPC of Provider Edge (PE) devices which can cause an out of memory condition and MPC restart. When this issue occurs, there will be temporary traffic interruption until the MPC is restored. An administrator can use the following CLI command to monitor the status of memory usage level of the MPC: user@device> show system resource-monitor fpc FPC Resource Usage Summary Free Heap Mem Watermark : 20 % Free NH Mem Watermark : 20 % Free Filter Mem Watermark : 20 % * - Watermark reached Slot # % Heap Free RTT Average RTT 1 87 PFE # % ENCAP mem Free % NH mem Free % FW mem Free 0 NA 88 99 1 NA 89 99 When the issue is occurring, the value of “% NH mem Free” will go down until the MPC restarts. This issue affects MX Series and EX9200 Series with Trio-based PFEs (Packet Forwarding Engines), including MX-MPC1-3D, MX-MPC1E-3D, MX-MPC2-3D, MX-MPC2E-3D, MPC-3D-16XGE, and CHAS-MXxx Series MPCs. No other products or platforms are affected by this issue. This issue affects Juniper Networks Junos OS on MX Series, EX9200 Series: 17.3 versions prior to 17.3R3-S10; 17.4 versions prior to 17.4R3-S3; 18.2 versions prior to 18.2R3-S7; 18.3 versions prior to 18.3R3-S4; 18.4 versions prior to 18.4R3-S6; 19.2 versions prior to 19.2R3-S2; 19.3 versions prior to 19.3R3-S1; 19.4 versions prior to 19.4R2-S2, 19.4R3; 20.2 versions prior to 20.2R1-S3, 20.2R2; 20.3 versions prior to 20.3R1-S1,, 20.3R2. This issue does not affect Juniper Networks Junos OS: 17.3 versions prior to 17.3R3-S8; 17.4 versions prior to 17.4R3-S2; 18.1; 18.2 versions prior to 18.2R3-S4; 18.3 versions prior to 18.3R3-S2; 18.4 versions prior to 18.4R3-S1; 19.1; 19.2 versions prior to 19.2R2; 19.3 versions prior to 19.3R3; 19.4 versions prior to 19.4R2.
Published Apr 22, 2021 · Updated Sep 17, 2024
The improper handling of client-side parameters in J-Web of Juniper Networks Junos OS allows an attacker to perform a number of different malicious actions against a target device when a user is authenticated to J-Web. An attacker may be able to supersede existing parameters, including hardcoded parameters within the HTTP/S session, access and exploit variables, bypass web application firewall rules or input validation mechanisms, and otherwise alter and modify J-Web's normal behavior. An attacker may be able to transition victims to malicious web services, or exfiltrate sensitive information from otherwise secure web forms. This issue affects: Juniper Networks Junos OS: All versions prior to 17.4R3-S3; 18.1 versions prior to 18.1R3-S12; 18.2 versions prior to 18.2R3-S6; 18.3 versions prior to 18.3R3-S4; 18.4 versions prior to 18.4R3-S6; 19.1 versions prior to 19.1R3-S4; 19.2 versions prior to 19.2R3-S1; 19.3 versions prior to 19.3R3-S1; 19.4 versions prior to 19.4R2-S2, 19.4R3; 20.1 versions prior to 20.1R2; 20.2 versions prior to 20.2R2.
Published Apr 22, 2021 · Updated Sep 17, 2024
Dell EMC iDRAC9 versions prior to 4.40.10.00 contain multiple stored cross-site scripting vulnerabilities. A remote authenticated malicious user with high privileges could potentially exploit these vulnerabilities to store malicious HTML or JavaScript code through multiple affected while generating a certificate. When victim users access the submitted data through their browsers, the malicious code gets executed by the web browser in the context of the vulnerable application.
Published Apr 30, 2021 · Updated Sep 17, 2024
Dell VNX2 for File version 8.1.21.266 and earlier, contain a privilege escalation vulnerability. A local malicious admin may potentially exploit vulnerability and gain elevated privileges.
Published Apr 8, 2022 · Updated Sep 17, 2024
An improper authorization vulnerability in the Simple Network Management Protocol daemon (snmpd) service of Juniper Networks Junos OS leads an unauthenticated attacker being able to perform SNMP read actions, an Exposure of System Data to an Unauthorized Control Sphere, or write actions to OIDs that support write operations, against the device without authentication. This issue affects: Juniper Networks Junos OS: 17.2 version 17.2R1 and later versions; 17.3 versions prior to 17.3R3-S9; 17.4 versions prior to 17.4R2-S12, 17.4R3-S5; 18.1 versions prior to 18.1R3-S13; 18.2 versions prior to 18.2R3-S8; 18.3 versions prior to 18.3R3-S5; 18.4 versions prior to 18.4R1-S8, 18.4R2-S5, 18.4R3; 19.1 versions prior to 19.1R2; 19.2 versions prior to 19.2R1-S6, 19.2R2; 19.3 versions prior to 19.3R2. This issue does not affect Juniper Networks Junos OS versions prior to 17.2R1.
Published Apr 22, 2021 · Updated Sep 17, 2024
The specific function in ASUS BMC’s firmware Web management page (Media support configuration setting) does not verify the string length entered by users, resulting in a Buffer overflow vulnerability. As obtaining the privileged permission, remote attackers use the leakage to abnormally terminate the Web service.
Published Apr 6, 2021 · Updated Sep 17, 2024
The package github.com/tyktechnologies/tyk-identity-broker before 1.1.1 are vulnerable to Authentication Bypass via the Go XML parser which can cause SAML authentication bypass. This is because the XML parser doesn’t guarantee integrity in the XML round-trip (encoding/decoding XML data).
Published Apr 26, 2021 · Updated Sep 17, 2024
Wyse Management Suite versions up to 3.2 contains a vulnerability wherein a malicious authenticated user can cause a denial of service in the job status retrieval page, also affecting other users that would have normally access to the same subset of job details
Published Apr 2, 2021 · Updated Sep 17, 2024
Improper Handling of Unexpected Data in the firewall policer of Juniper Networks Junos OS on EX4300 switches allows matching traffic to exceed set policer limits, possibly leading to a limited Denial of Service (DoS) condition. When the firewall policer discard action fails on a Layer 2 port, it will allow traffic to pass even though it exceeds set policer limits. Traffic will not get discarded, and will be forwarded even though a policer discard action is configured. When the issue occurs, traffic is not discarded as desired, which can be observed by comparing the Input bytes with the Output bytes using the following command: user@junos> monitor interface traffic Interface Link Input bytes (bps) Output bytes (bps) ge-0/0/0 Up 37425422 (82616) 37425354 (82616) <<<< egress ge-0/0/1 Up 37425898 (82616) 37425354 (82616) <<<< ingress The expected output, with input and output counters differing, is shown below: Interface Link Input bytes (bps) Output bytes (bps) ge-0/0/0 Up 342420570 (54600) 342422760 (54600) <<<< egress ge-0/0/1 Up 517672120 (84000) 342420570 (54600) <<<< ingress This issue only affects IPv4 policing. IPv6 traffic and firewall policing actions are not affected by this issue. This issue affects Juniper Networks Junos OS on the EX4300: All versions prior to 17.3R3-S10; 17.4 versions prior to 17.4R3-S3; 18.1 versions prior to 18.1R3-S11; 18.2 versions prior to 18.2R3-S6; 18.3 versions prior to 18.3R3-S4; 18.4 versions prior to 18.4R3-S6; 19.1 versions prior to 19.1R3-S3; 19.2 versions prior to 19.2R3-S1; 19.3 versions prior to 19.3R3-S1; 19.4 versions prior to 19.4R3; 20.1 versions prior to 20.1R2; 20.2 versions prior to 20.2R2.
Published Apr 22, 2021 · Updated Sep 17, 2024
IBM UrbanCode Deploy (UCD) 7.1.1.2 uses weaker than expected cryptographic algorithms that could allow an attacker to decrypt highly sensitive information.
Published Apr 29, 2022 · Updated Sep 17, 2024
Through routine static code analysis of the Juniper Networks Junos OS software codebase, the Secure Development Life Cycle team identified a Use After Free vulnerability in PFE packet processing on the QFX10002-60C switching platform. Exploitation of this vulnerability may allow a logically adjacent attacker to trigger a Denial of Service (DoS). Continued exploitation of this vulnerability will sustain the Denial of Service (DoS) condition. This issue only affects QFX10002-60C devices. No other product or platform is vulnerable to this issue. This issue affects Juniper Networks Junos OS on QFX10002-60C: 19.1 version 19.1R3-S1 and later versions; 19.1 versions prior to 19.1R3-S3; 19.2 version 19.2R2 and later versions; 19.2 versions prior to 19.2R3-S1; 20.2 versions prior to 20.2R1-S2. This issue does not affect Juniper Networks Junos OS: versions prior to 19.1R3; 19.2 versions prior to 19.2R2; any version of 19.3; version 20.2R2 and later releases.
Published Apr 22, 2021 · Updated Sep 17, 2024
This affects all versions of package psnode. If attacker-controlled user input is given to the kill function, it is possible for an attacker to execute arbitrary commands. This is due to use of the child_process exec function without input sanitization.
Published Apr 18, 2021 · Updated Sep 17, 2024
A vulnerability in the distributed or centralized periodic packet management daemon (PPMD) of Juniper Networks Junos OS may cause receipt of a malformed packet to crash and restart the PPMD process, leading to network destabilization, service interruption, and a Denial of Service (DoS) condition. Continued receipt and processing of these malformed packets will repeatedly crash the PPMD process and sustain the Denial of Service (DoS) condition. Due to the nature of the specifically crafted packet, exploitation of this issue requires direct, adjacent connectivity to the vulnerable component. This issue affects Juniper Networks Junos OS: 17.3 versions prior to 17.3R3-S11; 17.4 versions prior to 17.4R2-S12, 17.4R3-S4; 18.1 versions prior to 18.1R3-S12; 18.2 versions prior to 18.2R2-S8, 18.2R3-S7; 18.3 versions prior to 18.3R3-S4; 18.4 versions prior to 18.4R1-S8, 18.4R2-S7, 18.4R3-S6; 19.1 versions prior to 19.1R1-S6, 19.1R2-S2, 19.1R3-S4; 19.2 versions prior to 19.2R1-S5, 19.2R3-S1; 19.3 versions prior to 19.3R2-S5, 19.3R3-S1; 19.4 versions prior to 19.4R2-S2, 19.4R3; 20.1 versions prior to 20.1R2; 20.2 versions prior to 20.2R1-S2, 20.2R2.
Published Apr 22, 2021 · Updated Sep 17, 2024
Fibaro Home Center 2 and Lite devices with firmware version 4.600 and older initiate SSH connections to the Fibaro cloud to provide remote access and remote support capabilities. This connection can be intercepted using DNS spoofing attack and a device initiated remote port-forward channel can be used to connect to the web management interface. Knowledge of authorization credentials to the management interface is required to perform any further actions.
Published Apr 19, 2021 · Updated Sep 17, 2024
Eaton Intelligent Power Manager Infrastructure (IPM Infrastructure) version 1.5.0plus205 and all prior versions are vulnerable to CSV Formula Injection. This issue affects: Eaton Intelligent Power Manager Infrastructure (IPM Infrastructure) all version 1.5.0plus205 and prior versions.
Published Apr 18, 2022 · Updated Sep 17, 2024
A Cross-site Scripting (XSS) vulnerability in J-Web on Juniper Networks Junos OS allows an attacker to target another user's session thereby gaining access to the users session. The other user session must be active for the attack to succeed. Once successful, the attacker has the same privileges as the user. If the user has root privileges, the attacker may be able to gain full control of the device. This issue affects: Juniper Networks Junos OS: 12.3 versions prior to 12.3R12-S15 on EX Series; 12.3X48 versions prior to 12.3X48-D95 on SRX Series; 15.1 versions prior to 15.1R7-S6 on EX Series; 15.1X49 versions prior to 15.1X49-D200 on SRX Series; 16.1 versions prior to 16.1R7-S7; 16.2 versions prior to 16.2R2-S11, 16.2R3; 17.1 versions prior to 17.1R2-S11, 17.1R3-S2; 17.2 versions prior to 17.2R3-S3; 17.3 versions prior to 17.3R2-S5, 17.3R3-S7; 17.4 versions prior to 17.4R2-S9, 17.4R3; 18.1 versions prior to 18.1R3-S9; 18.2 versions prior to 18.2R2-S7, 18.2R3-S3; 18.3 versions prior to 18.3R1-S7, 18.3R2-S3, 18.3R3-S1; 18.4 versions prior to 18.4R1-S6, 18.4R2-S4, 18.4R3; 19.1 versions prior to 19.1R2-S1, 19.1R3; 19.2 versions prior to 19.2R1-S3, 19.2R2; 19.3 versions prior to 19.3R2.
Published Apr 22, 2021 · Updated Sep 17, 2024
In BIND 9.8.5 -> 9.8.8, 9.9.3 -> 9.11.29, 9.12.0 -> 9.16.13, and versions BIND 9.9.3-S1 -> 9.11.29-S1 and 9.16.8-S1 -> 9.16.13-S1 of BIND 9 Supported Preview Edition, as well as release versions 9.17.0 -> 9.17.11 of the BIND 9.17 development branch, when a vulnerable version of named receives a malformed IXFR triggering the flaw described above, the named process will terminate due to a failed assertion the next time the transferred secondary zone is refreshed.
Published Apr 29, 2021 · Updated Sep 17, 2024
IBM QRadar 7.3, 7.4, and 7.5 could allow a malicious actor to impersonate an actor due to key exchange without entity authentication. IBM X-Force ID: 208756.
Published Apr 27, 2022 · Updated Sep 17, 2024
IBM i 7.1, 7.2, 7.3, and 7.4 SMTP allows a network attacker to send emails to non-existent local-domain recipients to the SMTP server, caused by using a non-default configuration. An attacker could exploit this vulnerability to consume unnecessary network bandwidth and disk space, and allow remote attackers to send spam email. IBM X-Force ID: 198056.
Published Apr 21, 2021 · Updated Sep 17, 2024
The specific function in ASUS BMC’s firmware Web management page (Remote video configuration setting) does not verify the string length entered by users, resulting in a Buffer overflow vulnerability. As obtaining the privileged permission, remote attackers use the leakage to abnormally terminate the Web service.
Published Apr 6, 2021 · Updated Sep 17, 2024
An always-incorrect control flow implementation in the implicit filter terms of Juniper Networks Junos OS and Junos OS Evolved on ACX5800, EX9200 Series, MX10000 Series, MX240, MX480, MX960 devices with affected Trio line cards allows an attacker to exploit an interdependency in the PFE UCODE microcode of the Trio chipset with various line cards to cause packets destined to the devices interfaces to cause a Denial of Service (DoS) condition by looping the packet with an unreachable exit condition ('Infinite Loop'). To break this loop once it begins one side of the affected LT interfaces will need to be disabled. Once disabled, the condition will clear and the disabled LT interface can be reenabled. Continued receipt and processing of these packets will create a sustained Denial of Service (DoS) condition. This issue only affects LT-LT interfaces. Any other interfaces are not affected by this issue. This issue affects the following cards: MPCE Type 3 3D MPC4E 3D 32XGE MPC4E 3D 2CGE+8XGE EX9200 32x10G SFP EX9200-2C-8XS FPC Type 5-3D FPC Type 5-LSR EX9200 4x40G QSFP An Indicator of Compromise (IoC) can be seen by examining the traffic of the LT-LT interfaces for excessive traffic using the following command: monitor interface traffic Before loop impact: Interface: lt-2/0/0, Enabled, Link is Up Encapsulation: Logical-tunnel, Speed: 100000mbps Traffic statistics: Current delta Input bytes: 3759900268942 (1456 bps) [0] <---------- LT interface utilization is low Output bytes: 3759900344309 (1456 bps) [0] <---------- LT interface utilization is low After loop impact: Interface: lt-2/0/0, Enabled, Link is Up Encapsulation: Logical-tunnel, Speed: 100000mbps Traffic statistics: Current delta Input bytes: 3765160313129 (2158268368 bps) [5260044187] <---------- LT interface utilization is very high Output bytes: 3765160399522 (2158266440 bps) [5260055213] <---------- LT interface utilization is very high This issue affects: Juniper Networks Junos OS on ACX5800, EX9200 Series, MX10000 Series, MX240, MX480, MX960. Versions 15.1F6, 16.1R1, and later versions prior to 16.1R7-S8; 17.1 versions prior to 17.1R2-S12; 17.2 versions prior to 17.2R3-S4; 17.3 versions prior to 17.3R3-S8; 17.4 versions prior to 17.4R2-S10, 17.4R3-S2; 18.1 versions prior to 18.1R3-S10; 18.2 versions prior to 18.2R2-S7, 18.2R3-S3; 18.3 versions prior to 18.3R1-S7, 18.3R3-S2; 18.4 versions prior to 18.4R1-S7, 18.4R2-S4, 18.4R3-S2; 19.1 versions prior to 19.1R1-S5, 19.1R2-S1, 19.1R3; 19.2 versions prior to 19.2R1-S4, 19.2R2; 19.3 versions prior to 19.3R2-S3, 19.3R3; 19.4 versions prior to 19.4R1-S1, 19.4R2. This issue does not affect the MX10001. This issue does not affect Juniper Networks Junos OS versions prior to 15.1F6, 16.1R1. Juniper Networks Junos OS Evolved on ACX5800, EX9200 Series, MX10000 Series, MX240, MX480, MX960 19.4 versions prior to 19.4R2-EVO. This issue does not affect the MX10001.
Published Apr 22, 2021 · Updated Sep 17, 2024
The default administrator account & password of the EDIMAX wireless network camera is hard-coded. Remote attackers can disassemble firmware to obtain the privileged permission and further control the devices.
Published Apr 27, 2021 · Updated Sep 17, 2024
In segment routing traffic engineering (SRTE) environments where the BGP Monitoring Protocol (BMP) feature is enable, a vulnerability in the Routing Protocol Daemon (RPD) process of Juniper Networks Junos OS allows an attacker to send a specific crafted BGP update message causing the RPD service to core, creating a Denial of Service (DoS) Condition. Continued receipt and processing of this update message will create a sustained Denial of Service (DoS) condition. This issue affects IPv4 and IPv6 environments. This issue affects: Juniper Networks Junos OS 17.4 versions 17.4R1 and above prior to 17.4R2-S6, 17.4R3; 18.1 versions prior to 18.1R3-S7; 18.2 versions prior to 18.2R2-S6, 18.2R3-S3; 18.3 versions prior to 18.3R1-S7, 18.3R2-S3, 18.3R3; 18.4 versions prior to 18.4R1-S5, 18.4R2-S3, 18.4R3; 19.1 versions prior to 19.1R1-S4, 19.1R2; 19.2 versions prior to 19.2R1-S3, 19.2R2, This issue does not affect Junos OS releases prior to 17.4R1. This issue affects: Juniper Networks Junos OS Evolved 19.2-EVO versions prior to 19.2R2-EVO.
Published Apr 22, 2021 · Updated Sep 17, 2024
IBM System Storage DS8000 Management Console (HMC) R8.5 88.5x.x.x, R9.1 89.1x.0.0, and R9.2 89.2x.0.0 could allow a remote attacker to obtain sensitive information through unpublished URLs. IBM X-Force ID: 210330.
Published Apr 11, 2022 · Updated Sep 17, 2024
IBM QRadar SIEM 7.3, 7.4, and 7.5 in some situations may not automatically log users out after they exceede their idle timeout. IBM X-Force ID: 208341.
Published Apr 27, 2022 · Updated Sep 17, 2024
On Juniper Networks Junos OS Evolved devices, receipt of a specific IPv6 packet may cause an established IPv6 BGP session to terminate, creating a Denial of Service (DoS) condition. Continued receipt and processing of this packet will create a sustained Denial of Service (DoS) condition. This issue does not affect IPv4 BGP sessions. This issue affects IBGP or EBGP peer sessions with IPv6. This issue affects: Juniper Networks Junos OS Evolved: 19.4 versions prior to 19.4R2-S3-EVO; 20.1 versions prior to 20.1R2-S3-EVO; 20.2 versions prior to 20.2R2-S1-EVO; 20.3 versions prior to 20.3R2-EVO. This issue does not affect Juniper Networks Junos OS releases.
Published Apr 22, 2021 · Updated Sep 17, 2024
Under certain circumstances improper privilege management in Metasys ADS/ADX/OAS servers versions 10 and 11 could allow an authenticated user to elevate their privileges to administrator.
Published Apr 29, 2022 · Updated Sep 17, 2024
On SRX1500, SRX4100, SRX4200, SRX4600, SRX5000 Series with SPC2/SPC3, devices using tenant services on Juniper Networks Junos OS, due to incorrect default permissions assigned to tenant system administrators a tenant system administrator may inadvertently send their network traffic to one or more tenants while concurrently modifying the overall device system traffic management, affecting all tenants and the service provider. Further, a tenant may inadvertently receive traffic from another tenant. This issue affects: Juniper Networks Junos OS 18.3 version 18.3R1 and later versions on SRX1500, SRX4100, SRX4200, SRX4600, SRX5000 Series with SPC2; 18.3 versions prior to 18.3R3 on SRX1500, SRX4100, SRX4200, SRX4600, SRX5000 Series with SPC2; 18.4 versions prior to 18.4R2 on SRX1500, SRX4100, SRX4200, SRX4600, SRX5000 Series with SPC2/SPC3; 19.1 versions prior to 19.1R2 on SRX1500, SRX4100, SRX4200, SRX4600, SRX5000 Series with SPC2/SPC3. This issue does not affect: Juniper Networks Junos OS versions prior to 18.3R1.
Published Apr 22, 2021 · Updated Sep 17, 2024
IBM Spectrum Protect Plus 10.1.0 through 10.1.7 uses weaker than expected cryptographic algorithms that could allow an attacker to decrypt highly sensitive information. IBM X-Force ID: 200258.
Published Apr 26, 2021 · Updated Sep 17, 2024
Dell PowerScale OneFS 8.1.0 - 9.1.0 contains a privilege escalation in SmartLock compliance mode that may allow compadmin to execute arbitrary commands as root.
Published Apr 20, 2021 · Updated Sep 17, 2024
The package browserslist from 4.0.0 and before 4.16.5 are vulnerable to Regular Expression Denial of Service (ReDoS) during parsing of queries.
Published Apr 28, 2021 · Updated Sep 17, 2024
Non-constant-time comparison of CSRF tokens in endpoint request handler in com.vaadin:flow-server versions 3.0.0 through 5.0.3 (Vaadin 15.0.0 through 18.0.6), and com.vaadin:fusion-endpoint version 6.0.0 (Vaadin 19.0.0) allows attacker to guess a security token for Fusion endpoints via timing attack.
Published Apr 23, 2021 · Updated Sep 17, 2024
Dell System Update (DSU) 1.9 and earlier versions contain a denial of service vulnerability. A local authenticated malicious user with low privileges may potentially exploit this vulnerability to cause the system to run out of memory by running multiple instances of the vulnerable application.
Published Apr 2, 2021 · Updated Sep 17, 2024
The specific function in ASUS BMC’s firmware Web management page (ActiveX configuration-2 acquisition) does not verify the string length entered by users, resulting in a Buffer overflow vulnerability. As obtaining the privileged permission, remote attackers use the leakage to abnormally terminate the Web service.
Published Apr 6, 2021 · Updated Sep 16, 2024
An authentication bypass vulnerability in the Juniper Networks Paragon Active Assurance Control Center may allow an attacker with specific information about the deployment to mimic an already registered Test Agent and access its configuration including associated inventory details. If the issue occurs, the affected Test Agent will not be able to connect to the Control Center. This issue affects Juniper Networks Paragon Active Assurance Control Center All versions prior to 2.35.6; 2.36 versions prior to 2.36.2.
Published Apr 22, 2021 · Updated Sep 16, 2024
An information exposure through log file vulnerability exists in Palo Alto Networks PAN-OS software where the connection details for a scheduled configuration export are logged in system logs. Logged information includes the cleartext username, password, and IP address used to export the PAN-OS configuration to the destination server.
Published Apr 20, 2021 · Updated Sep 16, 2024
The Web Set Media Image function in ASUS BMC’s firmware Web management page does not filter the specific parameter. As obtaining the administrator permission, remote attackers can launch command injection to execute command arbitrary.
Published Apr 6, 2021 · Updated Sep 16, 2024
Non-constant-time comparison of CSRF tokens in UIDL request handler in com.vaadin:flow-server versions 1.0.0 through 1.0.13 (Vaadin 10.0.0 through 10.0.16), 1.1.0 prior to 2.0.0 (Vaadin 11 prior to 14), 2.0.0 through 2.4.6 (Vaadin 14.0.0 through 14.4.6), 3.0.0 prior to 5.0.0 (Vaadin 15 prior to 18), and 5.0.0 through 5.0.2 (Vaadin 18.0.0 through 18.0.5) allows attacker to guess a security token via timing attack.
Published Apr 23, 2021 · Updated Sep 16, 2024
When a MX Series is configured as a Broadband Network Gateway (BNG) based on Layer 2 Tunneling Protocol (L2TP), executing certain CLI command may cause the system to run out of disk space, excessive disk usage may cause other complications. An administrator can use the following CLI command to monitor the available disk space: user@device> show system storage Filesystem Size Used Avail Capacity Mounted on /dev/gpt/junos 19G 18G 147M 99% /.mount <<<<< running out of space tmpfs 21G 16K 21G 0% /.mount/tmp tmpfs 5.3G 1.7M 5.3G 0% /.mount/mfs This issue affects Juniper Networks Junos OS on MX Series: 17.3R1 and later versions prior to 17.4R3-S5, 18.1 versions prior to 18.1R3-S13, 18.2 versions prior to 18.2R3-S7; 18.3 versions prior to 18.3R3-S4; 18.4 versions prior to 18.4R3-S7; 19.1 versions prior to 19.1R3-S4; 19.2 versions prior to 19.2R1-S6, 19.2R3-S2; 19.3 versions prior to 19.3R3-S2; 19.4 versions prior to 19.4R2-S4, 19.4R3-S2; 20.1 versions prior to 20.1R3; 20.2 versions prior to 20.2R2-S3, 20.2R3; 20.3 versions prior to 20.3R2; 20.4 versions prior to 20.4R1-S1, 20.4R2; This issue does not affect Juniper Networks Junos OS versions prior to 17.3R1.
Published Apr 22, 2021 · Updated Sep 16, 2024
A vulnerability in Juniper Networks Junos OS running on the ACX5448 and ACX710 platforms may cause BFD sessions to flap when a high rate of transit ARP packets are received. This, in turn, may impact routing protocols and network stability, leading to a Denial of Service (DoS) condition. When a high rate of transit ARP packets are exceptioned to the CPU and BFD flaps, the following log messages may be seen: bfdd[15864]: BFDD_STATE_UP_TO_DOWN: BFD Session 192.168.14.3 (IFL 232) state Up -> Down LD/RD(17/19) Up time:11:38:17 Local diag: CtlExpire Remote diag: None Reason: Detect Timer Expiry. bfdd[15864]: BFDD_TRAP_SHOP_STATE_DOWN: local discriminator: 17, new state: down, interface: irb.998, peer addr: 192.168.14.3 rpd[15839]: RPD_ISIS_ADJDOWN: IS-IS lost L2 adjacency to peer on irb.998, reason: BFD Session Down bfdd[15864]: BFDD_TRAP_SHOP_STATE_UP: local discriminator: 17, new state: up, interface: irb.998, peer addr: 192.168.14.3 This issue only affects the ACX5448 Series and ACX710 Series routers. No other products or platforms are affected by this vulnerability. This issue affects Juniper Networks Junos OS: 18.2 versions prior to 18.2R3-S8 on ACX5448; 18.3 versions prior to 18.3R3-S5 on ACX5448; 18.4 versions prior to 18.4R1-S6, 18.4R3-S7 on ACX5448; 19.1 versions prior to 19.1R3-S5 on ACX5448; 19.2 versions prior to 19.2R2, 19.2R3 on ACX5448; 19.3 versions prior to 19.3R3 on ACX5448; 19.4 versions prior to 19.4R3 on ACX5448; 20.1 versions prior to 20.1R2 on ACX5448; 20.2 versions prior to 20.2R2 on ACX5448 and ACX710.
Published Apr 22, 2021 · Updated Sep 16, 2024
The Vangene deltaFlow E-platform does not take properly protective measures. Attackers can obtain privileged permissions remotely by tampering with users’ data in the Cookie.
Published Apr 6, 2021 · Updated Sep 16, 2024
Under certain circumstances the session token is not cleared on logout.
Published Apr 15, 2022 · Updated Sep 16, 2024
IBM Security Guardium 11.3 could allow a remote attacker to obtain sensitive information, caused by the failure to properly enable HTTP Strict Transport Security. An attacker could exploit this vulnerability to obtain sensitive information using man in the middle techniques. IBM X-Force ID: 215581.
Published Apr 19, 2022 · Updated Sep 16, 2024
The Administration GUI component of TIBCO Software Inc.'s TIBCO Administrator - Enterprise Edition, TIBCO Administrator - Enterprise Edition, TIBCO Administrator - Enterprise Edition Distribution for TIBCO Silver Fabric, TIBCO Administrator - Enterprise Edition Distribution for TIBCO Silver Fabric, TIBCO Administrator - Enterprise Edition for z/Linux, and TIBCO Administrator - Enterprise Edition for z/Linux contains an easily exploitable vulnerability that allows a low privileged attacker with network access to execute a persistent CSV injection attack from the affected system. A successful attack using this vulnerability requires human interaction from a person other than the attacker. Affected releases are TIBCO Software Inc.'s TIBCO Administrator - Enterprise Edition: versions 5.10.2 and below, TIBCO Administrator - Enterprise Edition: versions 5.11.0 and 5.11.1, TIBCO Administrator - Enterprise Edition Distribution for TIBCO Silver Fabric: versions 5.10.2 and below, TIBCO Administrator - Enterprise Edition Distribution for TIBCO Silver Fabric: versions 5.11.0 and 5.11.1, TIBCO Administrator - Enterprise Edition for z/Linux: versions 5.10.2 and below, and TIBCO Administrator - Enterprise Edition for z/Linux: versions 5.11.0 and 5.11.1.
Published Apr 20, 2021 · Updated Sep 16, 2024
Dell Hybrid Client versions prior to 1.5 contain a missing authentication for a critical function vulnerability. A local unauthenticated attacker may exploit this vulnerability in order to gain root level access to the system.
Published Apr 30, 2021 · Updated Sep 16, 2024
IBM Sterling B2B Integrator Standard Edition 6.0.0.0 through 6.0.3.5 and 6.1.0.0 through 6.1.1.0 could allow a remote attacker to obtain sensitive information when a detailed technical error message is returned in the browser. This information could be used in further attacks against the system. IBM X-Force ID: 213963.
Published Apr 19, 2022 · Updated Sep 16, 2024
The Radius configuration function in ASUS BMC’s firmware Web management page does not verify the string length entered by users, resulting in a Buffer overflow vulnerability. As obtaining the privileged permission, remote attackers use the leakage to abnormally terminate the Web service.
Published Apr 6, 2021 · Updated Sep 16, 2024
IBM Content Navigator 3.0.CD is vulnerable to cross-site scripting. This vulnerability allows users to embed arbitrary JavaScript code in the Web UI thus altering the intended functionality potentially leading to credentials disclosure within a trusted session. IBM X-Force ID: 196624.
Published Apr 27, 2021 · Updated Sep 16, 2024
