LiveActive security incident?Get immediate response
CVE archive

February 2026

Browse CVE records published in February 2026, with severity, affected products, CWE, KEV, and source-backed vulnerability context.

Showing 50 of 3072 matching CVEs · Page 12 of 62.

Unknown · CVSS Not scored

CVE-2026-23062: platform/x86: hp-bioscfg: Fix kernel panic in GET_INSTANCE_ID macro

In the Linux kernel, the following vulnerability has been resolved: platform/x86: hp-bioscfg: Fix kernel panic in GET_INSTANCE_ID macro The GET_INSTANCE_ID macro that caused a kernel panic when accessing sysfs attributes: 1. Off-by-one error: The loop condition used '<=' instead of '<', causing access beyond array bounds. Since array indices are 0-based and go from 0 to instances_count-1, the loop should use '<'. 2. Missing NULL check: The code dereferenced attr_name_kobj->name without checking if attr_name_kobj was NULL, causing a null pointer dereference in min_length_show() and other attribute show functions. The panic occurred when fwupd tried to read BIOS configuration attributes: Oops: general protection fault [#1] SMP KASAN NOPTI KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] RIP: 0010:min_length_show+0xcf/0x1d0 [hp_bioscfg] Add a NULL check for attr_name_kobj before dereferencing and corrects the loop boundary to match the pattern used elsewhere in the driver.

Published Feb 4, 2026 · Updated May 11, 2026

Unknown · CVSS Not scored

CVE-2026-23059: scsi: qla2xxx: Sanitize payload size to prevent member overflow

In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Sanitize payload size to prevent member overflow In qla27xx_copy_fpin_pkt() and qla27xx_copy_multiple_pkt(), the frame_size reported by firmware is used to calculate the copy length into item->iocb. However, the iocb member is defined as a fixed-size 64-byte array within struct purex_item. If the reported frame_size exceeds 64 bytes, subsequent memcpy calls will overflow the iocb member boundary. While extra memory might be allocated, this cross-member write is unsafe and triggers warnings under CONFIG_FORTIFY_SOURCE. Fix this by capping total_bytes to the size of the iocb member (64 bytes) before allocation and copying. This ensures all copies remain within the bounds of the destination structure member.

Published Feb 4, 2026 · Updated May 11, 2026

Unknown · CVSS Not scored

CVE-2026-23058: can: ems_usb: ems_usb_read_bulk_callback(): fix URB memory leak

In the Linux kernel, the following vulnerability has been resolved: can: ems_usb: ems_usb_read_bulk_callback(): fix URB memory leak Fix similar memory leak as in commit 7352e1d5932a ("can: gs_usb: gs_usb_receive_bulk_callback(): fix URB memory leak"). In ems_usb_open(), the URBs for USB-in transfers are allocated, added to the dev->rx_submitted anchor and submitted. In the complete callback ems_usb_read_bulk_callback(), the URBs are processed and resubmitted. In ems_usb_close() the URBs are freed by calling usb_kill_anchored_urbs(&dev->rx_submitted). However, this does not take into account that the USB framework unanchors the URB before the complete function is called. This means that once an in-URB has been completed, it is no longer anchored and is ultimately not released in ems_usb_close(). Fix the memory leak by anchoring the URB in the ems_usb_read_bulk_callback() to the dev->rx_submitted anchor.

Published Feb 4, 2026 · Updated May 11, 2026

Unknown · CVSS Not scored

CVE-2026-23057: vsock/virtio: Coalesce only linear skb

In the Linux kernel, the following vulnerability has been resolved: vsock/virtio: Coalesce only linear skb vsock/virtio common tries to coalesce buffers in rx queue: if a linear skb (with a spare tail room) is followed by a small skb (length limited by GOOD_COPY_LEN = 128), an attempt is made to join them. Since the introduction of MSG_ZEROCOPY support, assumption that a small skb will always be linear is incorrect. In the zerocopy case, data is lost and the linear skb is appended with uninitialized kernel memory. Of all 3 supported virtio-based transports, only loopback-transport is affected. G2H virtio-transport rx queue operates on explicitly linear skbs; see virtio_vsock_alloc_linear_skb() in virtio_vsock_rx_fill(). H2G vhost-transport may allocate non-linear skbs, but only for sizes that are not considered for coalescence; see PAGE_ALLOC_COSTLY_ORDER in virtio_vsock_alloc_skb(). Ensure only linear skbs are coalesced. Note that skb_tailroom(last_skb) > 0 guarantees last_skb is linear.

Published Feb 4, 2026 · Updated May 11, 2026

Unknown · CVSS Not scored

CVE-2026-23056: uacce: implement mremap in uacce_vm_ops to return -EPERM

In the Linux kernel, the following vulnerability has been resolved: uacce: implement mremap in uacce_vm_ops to return -EPERM The current uacce_vm_ops does not support the mremap operation of vm_operations_struct. Implement .mremap to return -EPERM to remind users. The reason we need to explicitly disable mremap is that when the driver does not implement .mremap, it uses the default mremap method. This could lead to a risk scenario: An application might first mmap address p1, then mremap to p2, followed by munmap(p1), and finally munmap(p2). Since the default mremap copies the original vma's vm_private_data (i.e., q) to the new vma, both munmap operations would trigger vma_close, causing q->qfr to be freed twice(qfr will be set to null here, so repeated release is ok).

Published Feb 4, 2026 · Updated May 11, 2026

Unknown · CVSS Not scored

CVE-2026-23055: i2c: riic: Move suspend handling to NOIRQ phase

In the Linux kernel, the following vulnerability has been resolved: i2c: riic: Move suspend handling to NOIRQ phase Commit 53326135d0e0 ("i2c: riic: Add suspend/resume support") added suspend support for the Renesas I2C driver and following this change on RZ/G3E the following WARNING is seen on entering suspend ... [ 134.275704] Freezing remaining freezable tasks completed (elapsed 0.001 seconds) [ 134.285536] ------------[ cut here ]------------ [ 134.290298] i2c i2c-2: Transfer while suspended [ 134.295174] WARNING: drivers/i2c/i2c-core.h:56 at __i2c_smbus_xfer+0x1e4/0x214, CPU#0: systemd-sleep/388 [ 134.365507] Tainted: [W]=WARN [ 134.368485] Hardware name: Renesas SMARC EVK version 2 based on r9a09g047e57 (DT) [ 134.375961] pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 134.382935] pc : __i2c_smbus_xfer+0x1e4/0x214 [ 134.387329] lr : __i2c_smbus_xfer+0x1e4/0x214 [ 134.391717] sp : ffff800083f23860 [ 134.395040] x29: ffff800083f23860 x28: 0000000000000000 x27: ffff800082ed5d60 [ 134.402226] x26: 0000001f4395fd74 x25: 0000000000000007 x24: 0000000000000001 [ 134.409408] x23: 0000000000000000 x22: 000000000000006f x21: ffff800083f23936 [ 134.416589] x20: ffff0000c090e140 x19: ffff0000c090e0d0 x18: 0000000000000006 [ 134.423771] x17: 6f63657320313030 x16: 2e30206465737061 x15: ffff800083f23280 [ 134.430953] x14: 0000000000000000 x13: ffff800082b16ce8 x12: 0000000000000f09 [ 134.438134] x11: 0000000000000503 x10: ffff800082b6ece8 x9 : ffff800082b16ce8 [ 134.445315] x8 : 00000000ffffefff x7 : ffff800082b6ece8 x6 : 80000000fffff000 [ 134.452495] x5 : 0000000000000504 x4 : 0000000000000000 x3 : 0000000000000000 [ 134.459672] x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff0000c9ee9e80 [ 134.466851] Call trace: [ 134.469311] __i2c_smbus_xfer+0x1e4/0x214 (P) [ 134.473715] i2c_smbus_xfer+0xbc/0x120 [ 134.477507] i2c_smbus_read_byte_data+0x4c/0x84 [ 134.482077] isl1208_i2c_read_time+0x44/0x178 [rtc_isl1208] [ 134.487703] isl1208_rtc_read_time+0x14/0x20 [rtc_isl1208] [ 134.493226] __rtc_read_time+0x44/0x88 [ 134.497012] rtc_read_time+0x3c/0x68 [ 134.500622] rtc_suspend+0x9c/0x170 The warning is triggered because I2C transfers can still be attempted while the controller is already suspended, due to inappropriate ordering of the system sleep callbacks. If the controller is autosuspended, there is no way to wake it up once runtime PM disabled (in suspend_late()). During system resume, the I2C controller will be available only after runtime PM is re-enabled (in resume_early()). However, this may be too late for some devices. Wake up the controller in the suspend() callback while runtime PM is still enabled. The I2C controller will remain available until the suspend_noirq() callback (pm_runtime_force_suspend()) is called. During resume, the I2C controller can be restored by the resume_noirq() callback (pm_runtime_force_resume()). Finally, the resume() callback re-enables autosuspend. As a result, the I2C controller can remain available until the system enters suspend_noirq() and from resume_noirq().

Published Feb 4, 2026 · Updated May 11, 2026

Unknown · CVSS Not scored

CVE-2026-23053: NFS: Fix a deadlock involving nfs_release_folio()

In the Linux kernel, the following vulnerability has been resolved: NFS: Fix a deadlock involving nfs_release_folio() Wang Zhaolong reports a deadlock involving NFSv4.1 state recovery waiting on kthreadd, which is attempting to reclaim memory by calling nfs_release_folio(). The latter cannot make progress due to state recovery being needed. It seems that the only safe thing to do here is to kick off a writeback of the folio, without waiting for completion, or else kicking off an asynchronous commit.

Published Feb 4, 2026 · Updated May 11, 2026

Unknown · CVSS Not scored

CVE-2026-23051: drm/amdgpu: fix drm panic null pointer when driver not support atomic

In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: fix drm panic null pointer when driver not support atomic When driver not support atomic, fb using plane->fb rather than plane->state->fb. (cherry picked from commit 2f2a72de673513247cd6fae14e53f6c40c5841ef)

Published Feb 4, 2026 · Updated May 11, 2026

Unknown · CVSS Not scored

CVE-2026-23050: pNFS: Fix a deadlock when returning a delegation during open()

In the Linux kernel, the following vulnerability has been resolved: pNFS: Fix a deadlock when returning a delegation during open() Ben Coddington reports seeing a hang in the following stack trace: 0 [ffffd0b50e1774e0] __schedule at ffffffff9ca05415 1 [ffffd0b50e177548] schedule at ffffffff9ca05717 2 [ffffd0b50e177558] bit_wait at ffffffff9ca061e1 3 [ffffd0b50e177568] __wait_on_bit at ffffffff9ca05cfb 4 [ffffd0b50e1775c8] out_of_line_wait_on_bit at ffffffff9ca05ea5 5 [ffffd0b50e177618] pnfs_roc at ffffffffc154207b [nfsv4] 6 [ffffd0b50e1776b8] _nfs4_proc_delegreturn at ffffffffc1506586 [nfsv4] 7 [ffffd0b50e177788] nfs4_proc_delegreturn at ffffffffc1507480 [nfsv4] 8 [ffffd0b50e1777f8] nfs_do_return_delegation at ffffffffc1523e41 [nfsv4] 9 [ffffd0b50e177838] nfs_inode_set_delegation at ffffffffc1524a75 [nfsv4] 10 [ffffd0b50e177888] nfs4_process_delegation at ffffffffc14f41dd [nfsv4] 11 [ffffd0b50e1778a0] _nfs4_opendata_to_nfs4_state at ffffffffc1503edf [nfsv4] 12 [ffffd0b50e1778c0] _nfs4_open_and_get_state at ffffffffc1504e56 [nfsv4] 13 [ffffd0b50e177978] _nfs4_do_open at ffffffffc15051b8 [nfsv4] 14 [ffffd0b50e1779f8] nfs4_do_open at ffffffffc150559c [nfsv4] 15 [ffffd0b50e177a80] nfs4_atomic_open at ffffffffc15057fb [nfsv4] 16 [ffffd0b50e177ad0] nfs4_file_open at ffffffffc15219be [nfsv4] 17 [ffffd0b50e177b78] do_dentry_open at ffffffff9c09e6ea 18 [ffffd0b50e177ba8] vfs_open at ffffffff9c0a082e 19 [ffffd0b50e177bd0] dentry_open at ffffffff9c0a0935 The issue is that the delegreturn is being asked to wait for a layout return that cannot complete because a state recovery was initiated. The state recovery cannot complete until the open() finishes processing the delegations it was given. The solution is to propagate the existing flags that indicate a non-blocking call to the function pnfs_roc(), so that it knows not to wait in this situation.

Published Feb 4, 2026 · Updated May 11, 2026

Unknown · CVSS Not scored

CVE-2026-23049: drm/panel-simple: fix connector type for DataImage SCF0700C48GGU18 panel

In the Linux kernel, the following vulnerability has been resolved: drm/panel-simple: fix connector type for DataImage SCF0700C48GGU18 panel The connector type for the DataImage SCF0700C48GGU18 panel is missing and devm_drm_panel_bridge_add() requires connector type to be set. This leads to a warning and a backtrace in the kernel log and panel does not work: " WARNING: CPU: 3 PID: 38 at drivers/gpu/drm/bridge/panel.c:379 devm_drm_of_get_bridge+0xac/0xb8 " The warning is triggered by a check for valid connector type in devm_drm_panel_bridge_add(). If there is no valid connector type set for a panel, the warning is printed and panel is not added. Fill in the missing connector type to fix the warning and make the panel operational once again.

Published Feb 4, 2026 · Updated May 11, 2026

Unknown · CVSS Not scored

CVE-2026-23048: udp: call skb_orphan() before skb_attempt_defer_free()

In the Linux kernel, the following vulnerability has been resolved: udp: call skb_orphan() before skb_attempt_defer_free() Standard UDP receive path does not use skb->destructor. But skmsg layer does use it, since it calls skb_set_owner_sk_safe() from udp_read_skb(). This then triggers this warning in skb_attempt_defer_free(): DEBUG_NET_WARN_ON_ONCE(skb->destructor); We must call skb_orphan() to fix this issue.

Published Feb 4, 2026 · Updated May 11, 2026

Unknown · CVSS Not scored

CVE-2026-23047: libceph: make calc_target() set t->paused, not just clear it

In the Linux kernel, the following vulnerability has been resolved: libceph: make calc_target() set t->paused, not just clear it Currently calc_target() clears t->paused if the request shouldn't be paused anymore, but doesn't ever set t->paused even though it's able to determine when the request should be paused. Setting t->paused is left to __submit_request() which is fine for regular requests but doesn't work for linger requests -- since __submit_request() doesn't operate on linger requests, there is nowhere for lreq->t.paused to be set. One consequence of this is that watches don't get reestablished on paused -> unpaused transitions in cases where requests have been paused long enough for the (paused) unwatch request to time out and for the subsequent (re)watch request to enter the paused state. On top of the watch not getting reestablished, rbd_reregister_watch() gets stuck with rbd_dev->watch_mutex held: rbd_register_watch __rbd_register_watch ceph_osdc_watch linger_reg_commit_wait It's waiting for lreq->reg_commit_wait to be completed, but for that to happen the respective request needs to end up on need_resend_linger list and be kicked when requests are unpaused. There is no chance for that if the request in question is never marked paused in the first place. The fact that rbd_dev->watch_mutex remains taken out forever then prevents the image from getting unmapped -- "rbd unmap" would inevitably hang in D state on an attempt to grab the mutex.

Published Feb 4, 2026 · Updated May 11, 2026

Unknown · CVSS Not scored

CVE-2026-23046: virtio_net: fix device mismatch in devm_kzalloc/devm_kfree

In the Linux kernel, the following vulnerability has been resolved: virtio_net: fix device mismatch in devm_kzalloc/devm_kfree Initial rss_hdr allocation uses virtio_device->device, but virtnet_set_queues() frees using net_device->device. This device mismatch causing below devres warning [ 3788.514041] ------------[ cut here ]------------ [ 3788.514044] WARNING: drivers/base/devres.c:1095 at devm_kfree+0x84/0x98, CPU#16: vdpa/1463 [ 3788.514054] Modules linked in: octep_vdpa virtio_net virtio_vdpa [last unloaded: virtio_vdpa] [ 3788.514064] CPU: 16 UID: 0 PID: 1463 Comm: vdpa Tainted: G W 6.18.0 #10 PREEMPT [ 3788.514067] Tainted: [W]=WARN [ 3788.514069] Hardware name: Marvell CN106XX board (DT) [ 3788.514071] pstate: 63400009 (nZCv daif +PAN -UAO +TCO +DIT -SSBS BTYPE=--) [ 3788.514074] pc : devm_kfree+0x84/0x98 [ 3788.514076] lr : devm_kfree+0x54/0x98 [ 3788.514079] sp : ffff800084e2f220 [ 3788.514080] x29: ffff800084e2f220 x28: ffff0003b2366000 x27: 000000000000003f [ 3788.514085] x26: 000000000000003f x25: ffff000106f17c10 x24: 0000000000000080 [ 3788.514089] x23: ffff00045bb8ab08 x22: ffff00045bb8a000 x21: 0000000000000018 [ 3788.514093] x20: ffff0004355c3080 x19: ffff00045bb8aa00 x18: 0000000000080000 [ 3788.514098] x17: 0000000000000040 x16: 000000000000001f x15: 000000000007ffff [ 3788.514102] x14: 0000000000000488 x13: 0000000000000005 x12: 00000000000fffff [ 3788.514106] x11: ffffffffffffffff x10: 0000000000000005 x9 : ffff800080c8c05c [ 3788.514110] x8 : ffff800084e2eeb8 x7 : 0000000000000000 x6 : 000000000000003f [ 3788.514115] x5 : ffff8000831bafe0 x4 : ffff800080c8b010 x3 : ffff0004355c3080 [ 3788.514119] x2 : ffff0004355c3080 x1 : 0000000000000000 x0 : 0000000000000000 [ 3788.514123] Call trace: [ 3788.514125] devm_kfree+0x84/0x98 (P) [ 3788.514129] virtnet_set_queues+0x134/0x2e8 [virtio_net] [ 3788.514135] virtnet_probe+0x9c0/0xe00 [virtio_net] [ 3788.514139] virtio_dev_probe+0x1e0/0x338 [ 3788.514144] really_probe+0xc8/0x3a0 [ 3788.514149] __driver_probe_device+0x84/0x170 [ 3788.514152] driver_probe_device+0x44/0x120 [ 3788.514155] __device_attach_driver+0xc4/0x168 [ 3788.514158] bus_for_each_drv+0x8c/0xf0 [ 3788.514161] __device_attach+0xa4/0x1c0 [ 3788.514164] device_initial_probe+0x1c/0x30 [ 3788.514168] bus_probe_device+0xb4/0xc0 [ 3788.514170] device_add+0x614/0x828 [ 3788.514173] register_virtio_device+0x214/0x258 [ 3788.514175] virtio_vdpa_probe+0xa0/0x110 [virtio_vdpa] [ 3788.514179] vdpa_dev_probe+0xa8/0xd8 [ 3788.514183] really_probe+0xc8/0x3a0 [ 3788.514186] __driver_probe_device+0x84/0x170 [ 3788.514189] driver_probe_device+0x44/0x120 [ 3788.514192] __device_attach_driver+0xc4/0x168 [ 3788.514195] bus_for_each_drv+0x8c/0xf0 [ 3788.514197] __device_attach+0xa4/0x1c0 [ 3788.514200] device_initial_probe+0x1c/0x30 [ 3788.514203] bus_probe_device+0xb4/0xc0 [ 3788.514206] device_add+0x614/0x828 [ 3788.514209] _vdpa_register_device+0x58/0x88 [ 3788.514211] octep_vdpa_dev_add+0x104/0x228 [octep_vdpa] [ 3788.514215] vdpa_nl_cmd_dev_add_set_doit+0x2d0/0x3c0 [ 3788.514218] genl_family_rcv_msg_doit+0xe4/0x158 [ 3788.514222] genl_rcv_msg+0x218/0x298 [ 3788.514225] netlink_rcv_skb+0x64/0x138 [ 3788.514229] genl_rcv+0x40/0x60 [ 3788.514233] netlink_unicast+0x32c/0x3b0 [ 3788.514237] netlink_sendmsg+0x170/0x3b8 [ 3788.514241] __sys_sendto+0x12c/0x1c0 [ 3788.514246] __arm64_sys_sendto+0x30/0x48 [ 3788.514249] invoke_syscall.constprop.0+0x58/0xf8 [ 3788.514255] do_el0_svc+0x48/0xd0 [ 3788.514259] el0_svc+0x48/0x210 [ 3788.514264] el0t_64_sync_handler+0xa0/0xe8 [ 3788.514268] el0t_64_sync+0x198/0x1a0 [ 3788.514271] ---[ end trace 0000000000000000 ]--- Fix by using virtio_device->device consistently for allocation and deallocation

Published Feb 4, 2026 · Updated May 11, 2026

Unknown · CVSS Not scored

CVE-2026-23045: net/ena: fix missing lock when update devlink params

In the Linux kernel, the following vulnerability has been resolved: net/ena: fix missing lock when update devlink params Fix assert lock warning while calling devl_param_driverinit_value_set() in ena. WARNING: net/devlink/core.c:261 at devl_assert_locked+0x62/0x90, CPU#0: kworker/0:0/9 CPU: 0 UID: 0 PID: 9 Comm: kworker/0:0 Not tainted 6.19.0-rc2+ #1 PREEMPT(lazy) Hardware name: Amazon EC2 m8i-flex.4xlarge/, BIOS 1.0 10/16/2017 Workqueue: events work_for_cpu_fn RIP: 0010:devl_assert_locked+0x62/0x90 Call Trace: <TASK> devl_param_driverinit_value_set+0x15/0x1c0 ena_devlink_alloc+0x18c/0x220 [ena] ? __pfx_ena_devlink_alloc+0x10/0x10 [ena] ? trace_hardirqs_on+0x18/0x140 ? lockdep_hardirqs_on+0x8c/0x130 ? __raw_spin_unlock_irqrestore+0x5d/0x80 ? __raw_spin_unlock_irqrestore+0x46/0x80 ? devm_ioremap_wc+0x9a/0xd0 ena_probe+0x4d2/0x1b20 [ena] ? __lock_acquire+0x56a/0xbd0 ? __pfx_ena_probe+0x10/0x10 [ena] ? local_clock+0x15/0x30 ? __lock_release.isra.0+0x1c9/0x340 ? mark_held_locks+0x40/0x70 ? lockdep_hardirqs_on_prepare.part.0+0x92/0x170 ? trace_hardirqs_on+0x18/0x140 ? lockdep_hardirqs_on+0x8c/0x130 ? __raw_spin_unlock_irqrestore+0x5d/0x80 ? __raw_spin_unlock_irqrestore+0x46/0x80 ? __pfx_ena_probe+0x10/0x10 [ena] ...... </TASK>

Published Feb 4, 2026 · Updated May 11, 2026

Unknown · CVSS Not scored

CVE-2026-23044: PM: hibernate: Fix crash when freeing invalid crypto compressor

In the Linux kernel, the following vulnerability has been resolved: PM: hibernate: Fix crash when freeing invalid crypto compressor When crypto_alloc_acomp() fails, it returns an ERR_PTR value, not NULL. The cleanup code in save_compressed_image() and load_compressed_image() unconditionally calls crypto_free_acomp() without checking for ERR_PTR, which causes crypto_acomp_tfm() to dereference an invalid pointer and crash the kernel. This can be triggered when the compression algorithm is unavailable (e.g., CONFIG_CRYPTO_LZO not enabled). Fix by adding IS_ERR_OR_NULL() checks before calling crypto_free_acomp() and acomp_request_free(), similar to the existing kthread_stop() check. [ rjw: Added 2 empty code lines ]

Published Feb 4, 2026 · Updated May 11, 2026

Unknown · CVSS Not scored

CVE-2026-23043: btrfs: fix NULL pointer dereference in do_abort_log_replay()

In the Linux kernel, the following vulnerability has been resolved: btrfs: fix NULL pointer dereference in do_abort_log_replay() Coverity reported a NULL pointer dereference issue (CID 1666756) in do_abort_log_replay(). When btrfs_alloc_path() fails in replay_one_buffer(), wc->subvol_path is NULL, but btrfs_abort_log_replay() calls do_abort_log_replay() which unconditionally dereferences wc->subvol_path when attempting to print debug information. Fix this by adding a NULL check before dereferencing wc->subvol_path in do_abort_log_replay().

Published Feb 4, 2026 · Updated May 11, 2026

Unknown · CVSS Not scored

CVE-2026-23042: idpf: fix aux device unplugging when rdma is not supported by vport

In the Linux kernel, the following vulnerability has been resolved: idpf: fix aux device unplugging when rdma is not supported by vport If vport flags do not contain VIRTCHNL2_VPORT_ENABLE_RDMA, driver does not allocate vdev_info for this vport. This leads to kernel NULL pointer dereference in idpf_idc_vport_dev_down(), which references vdev_info for every vport regardless. Check, if vdev_info was ever allocated before unplugging aux device.

Published Feb 4, 2026 · Updated May 11, 2026

Unknown · CVSS Not scored

CVE-2026-23041: bnxt_en: Fix NULL pointer crash in bnxt_ptp_enable during error cleanup

In the Linux kernel, the following vulnerability has been resolved: bnxt_en: Fix NULL pointer crash in bnxt_ptp_enable during error cleanup When bnxt_init_one() fails during initialization (e.g., bnxt_init_int_mode returns -ENODEV), the error path calls bnxt_free_hwrm_resources() which destroys the DMA pool and sets bp->hwrm_dma_pool to NULL. Subsequently, bnxt_ptp_clear() is called, which invokes ptp_clock_unregister(). Since commit a60fc3294a37 ("ptp: rework ptp_clock_unregister() to disable events"), ptp_clock_unregister() now calls ptp_disable_all_events(), which in turn invokes the driver's .enable() callback (bnxt_ptp_enable()) to disable PTP events before completing the unregistration. bnxt_ptp_enable() attempts to send HWRM commands via bnxt_ptp_cfg_pin() and bnxt_ptp_cfg_event(), both of which call hwrm_req_init(). This function tries to allocate from bp->hwrm_dma_pool, causing a NULL pointer dereference: bnxt_en 0000:01:00.0 (unnamed net_device) (uninitialized): bnxt_init_int_mode err: ffffffed KASAN: null-ptr-deref in range [0x0000000000000028-0x000000000000002f] Call Trace: __hwrm_req_init (drivers/net/ethernet/broadcom/bnxt/bnxt_hwrm.c:72) bnxt_ptp_enable (drivers/net/ethernet/broadcom/bnxt/bnxt_ptp.c:323 drivers/net/ethernet/broadcom/bnxt/bnxt_ptp.c:517) ptp_disable_all_events (drivers/ptp/ptp_chardev.c:66) ptp_clock_unregister (drivers/ptp/ptp_clock.c:518) bnxt_ptp_clear (drivers/net/ethernet/broadcom/bnxt/bnxt_ptp.c:1134) bnxt_init_one (drivers/net/ethernet/broadcom/bnxt/bnxt.c:16889) Lines are against commit f8f9c1f4d0c7 ("Linux 6.19-rc3") Fix this by clearing and unregistering ptp (bnxt_ptp_clear()) before freeing HWRM resources.

Published Feb 4, 2026 · Updated May 11, 2026

Unknown · CVSS Not scored

CVE-2026-23040: wifi: mac80211_hwsim: fix typo in frequency notification

In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211_hwsim: fix typo in frequency notification The NAN notification is for 5745 MHz which corresponds to channel 149 and not 5475 which is not actually a valid channel. This could result in a NULL pointer dereference in cfg80211_next_nan_dw_notif.

Published Feb 4, 2026 · Updated May 11, 2026

High · CVSS 7.8

CVE-2026-0875: MODEL File Parsing Out-of-Bounds Write

A maliciously crafted MODEL file, when parsed through certain Autodesk products, can force an Out-of-Bounds Write vulnerability. A malicious actor may leverage this vulnerability to cause a crash, cause data corruption, or execute arbitrary code in the context of the current process.

Published Feb 18, 2026 · Updated May 8, 2026

High · CVSS 7.8

CVE-2026-0874: CATPART File Parsing Out-of-Bounds Write

A maliciously crafted CATPART file, when parsed through certain Autodesk products, can force an Out-of-Bounds Write vulnerability. A malicious actor may leverage this vulnerability to cause a crash, cause data corruption, or execute arbitrary code in the context of the current process.

Published Feb 18, 2026 · Updated May 8, 2026

Critical · CVSS 9

CVE-2026-3377: Tenda F453 SafeUrlFilter fromSafeUrlFilter buffer overflow

A vulnerability was detected in Tenda F453 1.0.0.3. Affected by this issue is the function fromSafeUrlFilter of the file /goform/SafeUrlFilter. Performing a manipulation of the argument page results in buffer overflow. The attack can be initiated remotely. The exploit is now public and may be used.

Published Feb 28, 2026 · Updated May 5, 2026

Critical · CVSS 9

CVE-2026-3376: Tenda F453 SafeMacFilter fromSafeMacFilter buffer overflow

A security vulnerability has been detected in Tenda F453 1.0.0.3. Affected by this vulnerability is the function fromSafeMacFilter of the file /goform/SafeMacFilter. Such manipulation of the argument page leads to buffer overflow. It is possible to launch the attack remotely. The exploit has been disclosed publicly and may be used.

Published Feb 28, 2026 · Updated May 5, 2026

Medium · CVSS 4.2

CVE-2026-0598: Ansible-lightspeed: broken object level authorization leading to cross-user ai conversation context injection in ansible lightspeed api

A security flaw was identified in the Ansible Lightspeed API conversation endpoints that handle AI chat interactions. The APIs do not properly verify whether a conversation identifier belongs to the authenticated user making the request. As a result, an attacker with valid credentials could access or influence conversations owned by other users. This exposes sensitive conversation data and allows unauthorized manipulation of AI-generated outputs.

Published Feb 6, 2026 · Updated May 4, 2026

High · CVSS 8.8

CVE-2026-24070: Local Privilege Escalation via DYLIB Injection in Native Instruments Native Access

During the installation of the Native Access application, a privileged helper `com.native-instruments.NativeAccess.Helper2`, which is used by Native Access to trigger functions via XPC communication like copy-file, remove or set-permissions, is deployed as well. The communication with the XPC service of the privileged helper is only allowed if the client process is signed with the corresponding certificate and fulfills the following code signing requirement: "anchor trusted and certificate leaf[subject.CN] = \"Developer ID Application: Native Instruments GmbH (83K5EG6Z9V)\"" The Native Access application was found to be signed with the `com.apple.security.cs.allow-dyld-environment-variables` and `com.apple.security.cs.disable-library-validation` entitlements leading to DYLIB injection and therefore command execution in the context of this application. A low privileged user can exploit the DYLIB injection to trigger functions of the privileged helper XPC service resulting in privilege escalation by first deleting the /etc/sudoers file and then copying a malicious version of that file to /etc/sudoers.

Published Feb 2, 2026 · Updated Apr 29, 2026

High · CVSS 7.5

CVE-2026-22383: WordPress PawFriends - Pet Shop and Veterinary WordPress theme theme <= 1.3 - Insecure Direct Object References (IDOR) vulnerability

Authorization Bypass Through User-Controlled Key vulnerability in Mikado-Themes PawFriends - Pet Shop and Veterinary WordPress Theme pawfriends allows Exploiting Incorrectly Configured Access Control Security Levels.This issue affects PawFriends - Pet Shop and Veterinary WordPress Theme: from n/a through <= 1.3.

Published Feb 20, 2026 · Updated Apr 28, 2026

High · CVSS 8.1

CVE-2026-22381: WordPress PawFriends - Pet Shop and Veterinary WordPress Theme theme <= 1.3 - Local File Inclusion vulnerability

Improper Control of Filename for Include/Require Statement in PHP Program ('PHP Remote File Inclusion') vulnerability in Mikado-Themes PawFriends - Pet Shop and Veterinary WordPress Theme pawfriends allows PHP Local File Inclusion.This issue affects PawFriends - Pet Shop and Veterinary WordPress Theme: from n/a through <= 1.3.

Published Feb 20, 2026 · Updated Apr 28, 2026