High · CVSS 7.8
In the Linux kernel, the following vulnerability has been resolved:
btrfs: fix use-after-free on inode when scanning root during em shrinking
At btrfs_scan_root() we are accessing the inode's root (and fs_info) in a
call to btrfs_fs_closing() after we have scheduled the inode for a delayed
iput, and that can result in a use-after-free on the inode in case the
cleaner kthread does the iput before we dereference the inode in the call
to btrfs_fs_closing().
Fix this by using the fs_info stored already in a local variable instead
of doing inode->root->fs_info.
Published Mar 27, 2025 · Updated May 11, 2026
Unknown · CVSS Not scored
In the Linux kernel, the following vulnerability has been resolved:
i2c: npcm: disable interrupt enable bit before devm_request_irq
The customer reports that there is a soft lockup issue related to
the i2c driver. After checking, the i2c module was doing a tx transfer
and the bmc machine reboots in the middle of the i2c transaction, the i2c
module keeps the status without being reset.
Due to such an i2c module status, the i2c irq handler keeps getting
triggered since the i2c irq handler is registered in the kernel booting
process after the bmc machine is doing a warm rebooting.
The continuous triggering is stopped by the soft lockup watchdog timer.
Disable the interrupt enable bit in the i2c module before calling
devm_request_irq to fix this issue since the i2c relative status bit
is read-only.
Here is the soft lockup log.
[ 28.176395] watchdog: BUG: soft lockup - CPU#0 stuck for 26s! [swapper/0:1]
[ 28.183351] Modules linked in:
[ 28.186407] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.15.120-yocto-s-dirty-bbebc78 #1
[ 28.201174] pstate: 40000005 (nZcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 28.208128] pc : __do_softirq+0xb0/0x368
[ 28.212055] lr : __do_softirq+0x70/0x368
[ 28.215972] sp : ffffff8035ebca00
[ 28.219278] x29: ffffff8035ebca00 x28: 0000000000000002 x27: ffffff80071a3780
[ 28.226412] x26: ffffffc008bdc000 x25: ffffffc008bcc640 x24: ffffffc008be50c0
[ 28.233546] x23: ffffffc00800200c x22: 0000000000000000 x21: 000000000000001b
[ 28.240679] x20: 0000000000000000 x19: ffffff80001c3200 x18: ffffffffffffffff
[ 28.247812] x17: ffffffc02d2e0000 x16: ffffff8035eb8b40 x15: 00001e8480000000
[ 28.254945] x14: 02c3647e37dbfcb6 x13: 02c364f2ab14200c x12: 0000000002c364f2
[ 28.262078] x11: 00000000fa83b2da x10: 000000000000b67e x9 : ffffffc008010250
[ 28.269211] x8 : 000000009d983d00 x7 : 7fffffffffffffff x6 : 0000036d74732434
[ 28.276344] x5 : 00ffffffffffffff x4 : 0000000000000015 x3 : 0000000000000198
[ 28.283476] x2 : ffffffc02d2e0000 x1 : 00000000000000e0 x0 : ffffffc008bdcb40
[ 28.290611] Call trace:
[ 28.293052] __do_softirq+0xb0/0x368
[ 28.296625] __irq_exit_rcu+0xe0/0x100
[ 28.300374] irq_exit+0x14/0x20
[ 28.303513] handle_domain_irq+0x68/0x90
[ 28.307440] gic_handle_irq+0x78/0xb0
[ 28.311098] call_on_irq_stack+0x20/0x38
[ 28.315019] do_interrupt_handler+0x54/0x5c
[ 28.319199] el1_interrupt+0x2c/0x4c
[ 28.322777] el1h_64_irq_handler+0x14/0x20
[ 28.326872] el1h_64_irq+0x74/0x78
[ 28.330269] __setup_irq+0x454/0x780
[ 28.333841] request_threaded_irq+0xd0/0x1b4
[ 28.338107] devm_request_threaded_irq+0x84/0x100
[ 28.342809] npcm_i2c_probe_bus+0x188/0x3d0
[ 28.346990] platform_probe+0x6c/0xc4
[ 28.350653] really_probe+0xcc/0x45c
[ 28.354227] __driver_probe_device+0x8c/0x160
[ 28.358578] driver_probe_device+0x44/0xe0
[ 28.362670] __driver_attach+0x124/0x1d0
[ 28.366589] bus_for_each_dev+0x7c/0xe0
[ 28.370426] driver_attach+0x28/0x30
[ 28.373997] bus_add_driver+0x124/0x240
[ 28.377830] driver_register+0x7c/0x124
[ 28.381662] __platform_driver_register+0x2c/0x34
[ 28.386362] npcm_i2c_init+0x3c/0x5c
[ 28.389937] do_one_initcall+0x74/0x230
[ 28.393768] kernel_init_freeable+0x24c/0x2b4
[ 28.398126] kernel_init+0x28/0x130
[ 28.401614] ret_from_fork+0x10/0x20
[ 28.405189] Kernel panic - not syncing: softlockup: hung tasks
[ 28.411011] SMP: stopping secondary CPUs
[ 28.414933] Kernel Offset: disabled
[ 28.418412] CPU features: 0x00000000,00000802
[ 28.427644] Rebooting in 20 seconds..
Published Mar 27, 2025 · Updated May 11, 2026
Unknown · CVSS Not scored
In the Linux kernel, the following vulnerability has been resolved:
usbnet: gl620a: fix endpoint checking in genelink_bind()
Syzbot reports [1] a warning in usb_submit_urb() triggered by
inconsistencies between expected and actually present endpoints
in gl620a driver. Since genelink_bind() does not properly
verify whether specified eps are in fact provided by the device,
in this case, an artificially manufactured one, one may get a
mismatch.
Fix the issue by resorting to a usbnet utility function
usbnet_get_endpoints(), usually reserved for this very problem.
Check for endpoints and return early before proceeding further if
any are missing.
[1] Syzbot report:
usb 5-1: Manufacturer: syz
usb 5-1: SerialNumber: syz
usb 5-1: config 0 descriptor??
gl620a 5-1:0.23 usb0: register 'gl620a' at usb-dummy_hcd.0-1, ...
------------[ cut here ]------------
usb 5-1: BOGUS urb xfer, pipe 3 != type 1
WARNING: CPU: 2 PID: 1841 at drivers/usb/core/urb.c:503 usb_submit_urb+0xe4b/0x1730 drivers/usb/core/urb.c:503
Modules linked in:
CPU: 2 UID: 0 PID: 1841 Comm: kworker/2:2 Not tainted 6.12.0-syzkaller-07834-g06afb0f36106 #0
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014
Workqueue: mld mld_ifc_work
RIP: 0010:usb_submit_urb+0xe4b/0x1730 drivers/usb/core/urb.c:503
...
Call Trace:
<TASK>
usbnet_start_xmit+0x6be/0x2780 drivers/net/usb/usbnet.c:1467
__netdev_start_xmit include/linux/netdevice.h:5002 [inline]
netdev_start_xmit include/linux/netdevice.h:5011 [inline]
xmit_one net/core/dev.c:3590 [inline]
dev_hard_start_xmit+0x9a/0x7b0 net/core/dev.c:3606
sch_direct_xmit+0x1ae/0xc30 net/sched/sch_generic.c:343
__dev_xmit_skb net/core/dev.c:3827 [inline]
__dev_queue_xmit+0x13d4/0x43e0 net/core/dev.c:4400
dev_queue_xmit include/linux/netdevice.h:3168 [inline]
neigh_resolve_output net/core/neighbour.c:1514 [inline]
neigh_resolve_output+0x5bc/0x950 net/core/neighbour.c:1494
neigh_output include/net/neighbour.h:539 [inline]
ip6_finish_output2+0xb1b/0x2070 net/ipv6/ip6_output.c:141
__ip6_finish_output net/ipv6/ip6_output.c:215 [inline]
ip6_finish_output+0x3f9/0x1360 net/ipv6/ip6_output.c:226
NF_HOOK_COND include/linux/netfilter.h:303 [inline]
ip6_output+0x1f8/0x540 net/ipv6/ip6_output.c:247
dst_output include/net/dst.h:450 [inline]
NF_HOOK include/linux/netfilter.h:314 [inline]
NF_HOOK include/linux/netfilter.h:308 [inline]
mld_sendpack+0x9f0/0x11d0 net/ipv6/mcast.c:1819
mld_send_cr net/ipv6/mcast.c:2120 [inline]
mld_ifc_work+0x740/0xca0 net/ipv6/mcast.c:2651
process_one_work+0x9c5/0x1ba0 kernel/workqueue.c:3229
process_scheduled_works kernel/workqueue.c:3310 [inline]
worker_thread+0x6c8/0xf00 kernel/workqueue.c:3391
kthread+0x2c1/0x3a0 kernel/kthread.c:389
ret_from_fork+0x45/0x80 arch/x86/kernel/process.c:147
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244
</TASK>
Published Mar 27, 2025 · Updated May 11, 2026
Unknown · CVSS Not scored
In the Linux kernel, the following vulnerability has been resolved:
iommu/vt-d: Fix suspicious RCU usage
Commit <d74169ceb0d2> ("iommu/vt-d: Allocate DMAR fault interrupts
locally") moved the call to enable_drhd_fault_handling() to a code
path that does not hold any lock while traversing the drhd list. Fix
it by ensuring the dmar_global_lock lock is held when traversing the
drhd list.
Without this fix, the following warning is triggered:
=============================
WARNING: suspicious RCU usage
6.14.0-rc3 #55 Not tainted
-----------------------------
drivers/iommu/intel/dmar.c:2046 RCU-list traversed in non-reader section!!
other info that might help us debug this:
rcu_scheduler_active = 1, debug_locks = 1
2 locks held by cpuhp/1/23:
#0: ffffffff84a67c50 (cpu_hotplug_lock){++++}-{0:0}, at: cpuhp_thread_fun+0x87/0x2c0
#1: ffffffff84a6a380 (cpuhp_state-up){+.+.}-{0:0}, at: cpuhp_thread_fun+0x87/0x2c0
stack backtrace:
CPU: 1 UID: 0 PID: 23 Comm: cpuhp/1 Not tainted 6.14.0-rc3 #55
Call Trace:
<TASK>
dump_stack_lvl+0xb7/0xd0
lockdep_rcu_suspicious+0x159/0x1f0
? __pfx_enable_drhd_fault_handling+0x10/0x10
enable_drhd_fault_handling+0x151/0x180
cpuhp_invoke_callback+0x1df/0x990
cpuhp_thread_fun+0x1ea/0x2c0
smpboot_thread_fn+0x1f5/0x2e0
? __pfx_smpboot_thread_fn+0x10/0x10
kthread+0x12a/0x2d0
? __pfx_kthread+0x10/0x10
ret_from_fork+0x4a/0x60
? __pfx_kthread+0x10/0x10
ret_from_fork_asm+0x1a/0x30
</TASK>
Holding the lock in enable_drhd_fault_handling() triggers a lockdep splat
about a possible deadlock between dmar_global_lock and cpu_hotplug_lock.
This is avoided by not holding dmar_global_lock when calling
iommu_device_register(), which initiates the device probe process.
Published Mar 27, 2025 · Updated May 11, 2026
Unknown · CVSS Not scored
In the Linux kernel, the following vulnerability has been resolved:
dm-integrity: Avoid divide by zero in table status in Inline mode
In Inline mode, the journal is unused, and journal_sectors is zero.
Calculating the journal watermark requires dividing by journal_sectors,
which should be done only if the journal is configured.
Otherwise, a simple table query (dmsetup table) can cause OOPS.
This bug did not show on some systems, perhaps only due to
compiler optimization.
On my 32-bit testing machine, this reliably crashes with the following:
: Oops: divide error: 0000 [#1] PREEMPT SMP
: CPU: 0 UID: 0 PID: 2450 Comm: dmsetup Not tainted 6.14.0-rc2+ #959
: EIP: dm_integrity_status+0x2f8/0xab0 [dm_integrity]
...
Published Mar 27, 2025 · Updated May 11, 2026
Unknown · CVSS Not scored
In the Linux kernel, the following vulnerability has been resolved:
scsi: ufs: core: bsg: Fix crash when arpmb command fails
If the device doesn't support arpmb we'll crash due to copying user data in
bsg_transport_sg_io_fn().
In the case where ufs_bsg_exec_advanced_rpmb_req() returns an error, do not
set the job's reply_len.
Memory crash backtrace:
3,1290,531166405,-;ufshcd 0000:00:12.5: ARPMB OP failed: error code -22
4,1308,531166555,-;Call Trace:
4,1309,531166559,-; <TASK>
4,1310,531166565,-; ? show_regs+0x6d/0x80
4,1311,531166575,-; ? die+0x37/0xa0
4,1312,531166583,-; ? do_trap+0xd4/0xf0
4,1313,531166593,-; ? do_error_trap+0x71/0xb0
4,1314,531166601,-; ? usercopy_abort+0x6c/0x80
4,1315,531166610,-; ? exc_invalid_op+0x52/0x80
4,1316,531166622,-; ? usercopy_abort+0x6c/0x80
4,1317,531166630,-; ? asm_exc_invalid_op+0x1b/0x20
4,1318,531166643,-; ? usercopy_abort+0x6c/0x80
4,1319,531166652,-; __check_heap_object+0xe3/0x120
4,1320,531166661,-; check_heap_object+0x185/0x1d0
4,1321,531166670,-; __check_object_size.part.0+0x72/0x150
4,1322,531166679,-; __check_object_size+0x23/0x30
4,1323,531166688,-; bsg_transport_sg_io_fn+0x314/0x3b0
Published Mar 27, 2025 · Updated May 11, 2026
Unknown · CVSS Not scored
In the Linux kernel, the following vulnerability has been resolved:
efi: Don't map the entire mokvar table to determine its size
Currently, when validating the mokvar table, we (re)map the entire table
on each iteration of the loop, adding space as we discover new entries.
If the table grows over a certain size, this fails due to limitations of
early_memmap(), and we get a failure and traceback:
------------[ cut here ]------------
WARNING: CPU: 0 PID: 0 at mm/early_ioremap.c:139 __early_ioremap+0xef/0x220
...
Call Trace:
<TASK>
? __early_ioremap+0xef/0x220
? __warn.cold+0x93/0xfa
? __early_ioremap+0xef/0x220
? report_bug+0xff/0x140
? early_fixup_exception+0x5d/0xb0
? early_idt_handler_common+0x2f/0x3a
? __early_ioremap+0xef/0x220
? efi_mokvar_table_init+0xce/0x1d0
? setup_arch+0x864/0xc10
? start_kernel+0x6b/0xa10
? x86_64_start_reservations+0x24/0x30
? x86_64_start_kernel+0xed/0xf0
? common_startup_64+0x13e/0x141
</TASK>
---[ end trace 0000000000000000 ]---
mokvar: Failed to map EFI MOKvar config table pa=0x7c4c3000, size=265187.
Mapping the entire structure isn't actually necessary, as we don't ever
need more than one entry header mapped at once.
Changes efi_mokvar_table_init() to only map each entry header, not the
entire table, when determining the table size. Since we're not mapping
any data past the variable name, it also changes the code to enforce
that each variable name is NUL terminated, rather than attempting to
verify it in place.
Published Mar 27, 2025 · Updated May 11, 2026
Unknown · CVSS Not scored
In the Linux kernel, the following vulnerability has been resolved:
tee: optee: Fix supplicant wait loop
OP-TEE supplicant is a user-space daemon and it's possible for it
be hung or crashed or killed in the middle of processing an OP-TEE
RPC call. It becomes more complicated when there is incorrect shutdown
ordering of the supplicant process vs the OP-TEE client application which
can eventually lead to system hang-up waiting for the closure of the
client application.
Allow the client process waiting in kernel for supplicant response to
be killed rather than indefinitely waiting in an unkillable state. Also,
a normal uninterruptible wait should not have resulted in the hung-task
watchdog getting triggered, but the endless loop would.
This fixes issues observed during system reboot/shutdown when supplicant
got hung for some reason or gets crashed/killed which lead to client
getting hung in an unkillable state. It in turn lead to system being in
hung up state requiring hard power off/on to recover.
Published Mar 27, 2025 · Updated May 11, 2026
Unknown · CVSS Not scored
In the Linux kernel, the following vulnerability has been resolved:
ASoC: SOF: ipc4-topology: Harden loops for looking up ALH copiers
Other, non DAI copier widgets could have the same stream name (sname) as
the ALH copier and in that case the copier->data is NULL, no alh_data is
attached, which could lead to NULL pointer dereference.
We could check for this NULL pointer in sof_ipc4_prepare_copier_module()
and avoid the crash, but a similar loop in sof_ipc4_widget_setup_comp_dai()
will miscalculate the ALH device count, causing broken audio.
The correct fix is to harden the matching logic by making sure that the
1. widget is a DAI widget - so dai = w->private is valid
2. the dai (and thus the copier) is ALH copier
Published Mar 27, 2025 · Updated May 11, 2026
Unknown · CVSS Not scored
In the Linux kernel, the following vulnerability has been resolved:
powerpc/code-patching: Disable KASAN report during patching via temporary mm
Erhard reports the following KASAN hit on Talos II (power9) with kernel 6.13:
[ 12.028126] ==================================================================
[ 12.028198] BUG: KASAN: user-memory-access in copy_to_kernel_nofault+0x8c/0x1a0
[ 12.028260] Write of size 8 at addr 0000187e458f2000 by task systemd/1
[ 12.028346] CPU: 87 UID: 0 PID: 1 Comm: systemd Tainted: G T 6.13.0-P9-dirty #3
[ 12.028408] Tainted: [T]=RANDSTRUCT
[ 12.028446] Hardware name: T2P9D01 REV 1.01 POWER9 0x4e1202 opal:skiboot-bc106a0 PowerNV
[ 12.028500] Call Trace:
[ 12.028536] [c000000008dbf3b0] [c000000001656a48] dump_stack_lvl+0xbc/0x110 (unreliable)
[ 12.028609] [c000000008dbf3f0] [c0000000006e2fc8] print_report+0x6b0/0x708
[ 12.028666] [c000000008dbf4e0] [c0000000006e2454] kasan_report+0x164/0x300
[ 12.028725] [c000000008dbf600] [c0000000006e54d4] kasan_check_range+0x314/0x370
[ 12.028784] [c000000008dbf640] [c0000000006e6310] __kasan_check_write+0x20/0x40
[ 12.028842] [c000000008dbf660] [c000000000578e8c] copy_to_kernel_nofault+0x8c/0x1a0
[ 12.028902] [c000000008dbf6a0] [c0000000000acfe4] __patch_instructions+0x194/0x210
[ 12.028965] [c000000008dbf6e0] [c0000000000ade80] patch_instructions+0x150/0x590
[ 12.029026] [c000000008dbf7c0] [c0000000001159bc] bpf_arch_text_copy+0x6c/0xe0
[ 12.029085] [c000000008dbf800] [c000000000424250] bpf_jit_binary_pack_finalize+0x40/0xc0
[ 12.029147] [c000000008dbf830] [c000000000115dec] bpf_int_jit_compile+0x3bc/0x930
[ 12.029206] [c000000008dbf990] [c000000000423720] bpf_prog_select_runtime+0x1f0/0x280
[ 12.029266] [c000000008dbfa00] [c000000000434b18] bpf_prog_load+0xbb8/0x1370
[ 12.029324] [c000000008dbfb70] [c000000000436ebc] __sys_bpf+0x5ac/0x2e00
[ 12.029379] [c000000008dbfd00] [c00000000043a228] sys_bpf+0x28/0x40
[ 12.029435] [c000000008dbfd20] [c000000000038eb4] system_call_exception+0x334/0x610
[ 12.029497] [c000000008dbfe50] [c00000000000c270] system_call_vectored_common+0xf0/0x280
[ 12.029561] --- interrupt: 3000 at 0x3fff82f5cfa8
[ 12.029608] NIP: 00003fff82f5cfa8 LR: 00003fff82f5cfa8 CTR: 0000000000000000
[ 12.029660] REGS: c000000008dbfe80 TRAP: 3000 Tainted: G T (6.13.0-P9-dirty)
[ 12.029735] MSR: 900000000280f032 <SF,HV,VEC,VSX,EE,PR,FP,ME,IR,DR,RI> CR: 42004848 XER: 00000000
[ 12.029855] IRQMASK: 0
GPR00: 0000000000000169 00003fffdcf789a0 00003fff83067100 0000000000000005
GPR04: 00003fffdcf78a98 0000000000000090 0000000000000000 0000000000000008
GPR08: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
GPR12: 0000000000000000 00003fff836ff7e0 c000000000010678 0000000000000000
GPR16: 0000000000000000 0000000000000000 00003fffdcf78f28 00003fffdcf78f90
GPR20: 0000000000000000 0000000000000000 0000000000000000 00003fffdcf78f80
GPR24: 00003fffdcf78f70 00003fffdcf78d10 00003fff835c7239 00003fffdcf78bd8
GPR28: 00003fffdcf78a98 0000000000000000 0000000000000000 000000011f547580
[ 12.030316] NIP [00003fff82f5cfa8] 0x3fff82f5cfa8
[ 12.030361] LR [00003fff82f5cfa8] 0x3fff82f5cfa8
[ 12.030405] --- interrupt: 3000
[ 12.030444] ==================================================================
Commit c28c15b6d28a ("powerpc/code-patching: Use temporary mm for
Radix MMU") is inspired from x86 but unlike x86 is doesn't disable
KASAN reports during patching. This wasn't a problem at the begining
because __patch_mem() is not instrumented.
Commit 465cabc97b42 ("powerpc/code-patching: introduce
patch_instructions()") use copy_to_kernel_nofault() to copy several
instructions at once. But when using temporary mm the destination is
not regular kernel memory but a kind of kernel-like memory located
in user address space.
---truncated---
Published Mar 27, 2025 · Updated May 11, 2026
Unknown · CVSS Not scored
In the Linux kernel, the following vulnerability has been resolved:
net: allow small head cache usage with large MAX_SKB_FRAGS values
Sabrina reported the following splat:
WARNING: CPU: 0 PID: 1 at net/core/dev.c:6935 netif_napi_add_weight_locked+0x8f2/0xba0
Modules linked in:
CPU: 0 UID: 0 PID: 1 Comm: swapper/0 Not tainted 6.14.0-rc1-net-00092-g011b03359038 #996
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Arch Linux 1.16.3-1-1 04/01/2014
RIP: 0010:netif_napi_add_weight_locked+0x8f2/0xba0
Code: e8 c3 e6 6a fe 48 83 c4 28 5b 5d 41 5c 41 5d 41 5e 41 5f c3 cc cc cc cc c7 44 24 10 ff ff ff ff e9 8f fb ff ff e8 9e e6 6a fe <0f> 0b e9 d3 fe ff ff e8 92 e6 6a fe 48 8b 04 24 be ff ff ff ff 48
RSP: 0000:ffffc9000001fc60 EFLAGS: 00010293
RAX: 0000000000000000 RBX: ffff88806ce48128 RCX: 1ffff11001664b9e
RDX: ffff888008f00040 RSI: ffffffff8317ca42 RDI: ffff88800b325cb6
RBP: ffff88800b325c40 R08: 0000000000000001 R09: ffffed100167502c
R10: ffff88800b3a8163 R11: 0000000000000000 R12: ffff88800ac1c168
R13: ffff88800ac1c168 R14: ffff88800ac1c168 R15: 0000000000000007
FS: 0000000000000000(0000) GS:ffff88806ce00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: ffff888008201000 CR3: 0000000004c94001 CR4: 0000000000370ef0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
gro_cells_init+0x1ba/0x270
xfrm_input_init+0x4b/0x2a0
xfrm_init+0x38/0x50
ip_rt_init+0x2d7/0x350
ip_init+0xf/0x20
inet_init+0x406/0x590
do_one_initcall+0x9d/0x2e0
do_initcalls+0x23b/0x280
kernel_init_freeable+0x445/0x490
kernel_init+0x20/0x1d0
ret_from_fork+0x46/0x80
ret_from_fork_asm+0x1a/0x30
</TASK>
irq event stamp: 584330
hardirqs last enabled at (584338): [<ffffffff8168bf87>] __up_console_sem+0x77/0xb0
hardirqs last disabled at (584345): [<ffffffff8168bf6c>] __up_console_sem+0x5c/0xb0
softirqs last enabled at (583242): [<ffffffff833ee96d>] netlink_insert+0x14d/0x470
softirqs last disabled at (583754): [<ffffffff8317c8cd>] netif_napi_add_weight_locked+0x77d/0xba0
on kernel built with MAX_SKB_FRAGS=45, where SKB_WITH_OVERHEAD(1024)
is smaller than GRO_MAX_HEAD.
Such built additionally contains the revert of the single page frag cache
so that napi_get_frags() ends up using the page frag allocator, triggering
the splat.
Note that the underlying issue is independent from the mentioned
revert; address it ensuring that the small head cache will fit either TCP
and GRO allocation and updating napi_alloc_skb() and __netdev_alloc_skb()
to select kmalloc() usage for any allocation fitting such cache.
Published Mar 27, 2025 · Updated May 11, 2026
Medium · CVSS 5.5
In the Linux kernel, the following vulnerability has been resolved:
powerpc/code-patching: Fix KASAN hit by not flagging text patching area as VM_ALLOC
Erhard reported the following KASAN hit while booting his PowerMac G4
with a KASAN-enabled kernel 6.13-rc6:
BUG: KASAN: vmalloc-out-of-bounds in copy_to_kernel_nofault+0xd8/0x1c8
Write of size 8 at addr f1000000 by task chronyd/1293
CPU: 0 UID: 123 PID: 1293 Comm: chronyd Tainted: G W 6.13.0-rc6-PMacG4 #2
Tainted: [W]=WARN
Hardware name: PowerMac3,6 7455 0x80010303 PowerMac
Call Trace:
[c2437590] [c1631a84] dump_stack_lvl+0x70/0x8c (unreliable)
[c24375b0] [c0504998] print_report+0xdc/0x504
[c2437610] [c050475c] kasan_report+0xf8/0x108
[c2437690] [c0505a3c] kasan_check_range+0x24/0x18c
[c24376a0] [c03fb5e4] copy_to_kernel_nofault+0xd8/0x1c8
[c24376c0] [c004c014] patch_instructions+0x15c/0x16c
[c2437710] [c00731a8] bpf_arch_text_copy+0x60/0x7c
[c2437730] [c0281168] bpf_jit_binary_pack_finalize+0x50/0xac
[c2437750] [c0073cf4] bpf_int_jit_compile+0xb30/0xdec
[c2437880] [c0280394] bpf_prog_select_runtime+0x15c/0x478
[c24378d0] [c1263428] bpf_prepare_filter+0xbf8/0xc14
[c2437990] [c12677ec] bpf_prog_create_from_user+0x258/0x2b4
[c24379d0] [c027111c] do_seccomp+0x3dc/0x1890
[c2437ac0] [c001d8e0] system_call_exception+0x2dc/0x420
[c2437f30] [c00281ac] ret_from_syscall+0x0/0x2c
--- interrupt: c00 at 0x5a1274
NIP: 005a1274 LR: 006a3b3c CTR: 005296c8
REGS: c2437f40 TRAP: 0c00 Tainted: G W (6.13.0-rc6-PMacG4)
MSR: 0200f932 <VEC,EE,PR,FP,ME,IR,DR,RI> CR: 24004422 XER: 00000000
GPR00: 00000166 af8f3fa0 a7ee3540 00000001 00000000 013b6500 005a5858 0200f932
GPR08: 00000000 00001fe9 013d5fc8 005296c8 2822244c 00b2fcd8 00000000 af8f4b57
GPR16: 00000000 00000001 00000000 00000000 00000000 00000001 00000000 00000002
GPR24: 00afdbb0 00000000 00000000 00000000 006e0004 013ce060 006e7c1c 00000001
NIP [005a1274] 0x5a1274
LR [006a3b3c] 0x6a3b3c
--- interrupt: c00
The buggy address belongs to the virtual mapping at
[f1000000, f1002000) created by:
text_area_cpu_up+0x20/0x190
The buggy address belongs to the physical page:
page: refcount:1 mapcount:0 mapping:00000000 index:0x0 pfn:0x76e30
flags: 0x80000000(zone=2)
raw: 80000000 00000000 00000122 00000000 00000000 00000000 ffffffff 00000001
raw: 00000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
f0ffff00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0ffff80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>f1000000: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8
^
f1000080: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8
f1000100: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8
==================================================================
f8 corresponds to KASAN_VMALLOC_INVALID which means the area is not
initialised hence not supposed to be used yet.
Powerpc text patching infrastructure allocates a virtual memory area
using get_vm_area() and flags it as VM_ALLOC. But that flag is meant
to be used for vmalloc() and vmalloc() allocated memory is not
supposed to be used before a call to __vmalloc_node_range() which is
never called for that area.
That went undetected until commit e4137f08816b ("mm, kasan, kmsan:
instrument copy_from/to_kernel_nofault")
The area allocated by text_area_cpu_up() is not vmalloc memory, it is
mapped directly on demand when needed by map_kernel_page(). There is
no VM flag corresponding to such usage, so just pass no flag. That way
the area will be unpoisonned and usable immediately.
Published Mar 12, 2025 · Updated May 11, 2026
Unknown · CVSS Not scored
In the Linux kernel, the following vulnerability has been resolved:
mm/zswap: fix inconsistency when zswap_store_page() fails
Commit b7c0ccdfbafd ("mm: zswap: support large folios in zswap_store()")
skips charging any zswap entries when it failed to zswap the entire folio.
However, when some base pages are zswapped but it failed to zswap the
entire folio, the zswap operation is rolled back. When freeing zswap
entries for those pages, zswap_entry_free() uncharges the zswap entries
that were not previously charged, causing zswap charging to become
inconsistent.
This inconsistency triggers two warnings with following steps:
# On a machine with 64GiB of RAM and 36GiB of zswap
$ stress-ng --bigheap 2 # wait until the OOM-killer kills stress-ng
$ sudo reboot
The two warnings are:
in mm/memcontrol.c:163, function obj_cgroup_release():
WARN_ON_ONCE(nr_bytes & (PAGE_SIZE - 1));
in mm/page_counter.c:60, function page_counter_cancel():
if (WARN_ONCE(new < 0, "page_counter underflow: %ld nr_pages=%lu\n",
new, nr_pages))
zswap_stored_pages also becomes inconsistent in the same way.
As suggested by Kanchana, increment zswap_stored_pages and charge zswap
entries within zswap_store_page() when it succeeds. This way,
zswap_entry_free() will decrement the counter and uncharge the entries
when it failed to zswap the entire folio.
While this could potentially be optimized by batching objcg charging and
incrementing the counter, let's focus on fixing the bug this time and
leave the optimization for later after some evaluation.
After resolving the inconsistency, the warnings disappear.
[42.hyeyoo@gmail.com: refactor zswap_store_page()]
Published Mar 12, 2025 · Updated May 11, 2026
Medium · CVSS 5.5
In the Linux kernel, the following vulnerability has been resolved:
net/sched: cls_api: fix error handling causing NULL dereference
tcf_exts_miss_cookie_base_alloc() calls xa_alloc_cyclic() which can
return 1 if the allocation succeeded after wrapping. This was treated as
an error, with value 1 returned to caller tcf_exts_init_ex() which sets
exts->actions to NULL and returns 1 to caller fl_change().
fl_change() treats err == 1 as success, calling tcf_exts_validate_ex()
which calls tcf_action_init() with exts->actions as argument, where it
is dereferenced.
Example trace:
BUG: kernel NULL pointer dereference, address: 0000000000000000
CPU: 114 PID: 16151 Comm: handler114 Kdump: loaded Not tainted 5.14.0-503.16.1.el9_5.x86_64 #1
RIP: 0010:tcf_action_init+0x1f8/0x2c0
Call Trace:
tcf_action_init+0x1f8/0x2c0
tcf_exts_validate_ex+0x175/0x190
fl_change+0x537/0x1120 [cls_flower]
Published Mar 12, 2025 · Updated May 11, 2026
High · CVSS 7.8
In the Linux kernel, the following vulnerability has been resolved:
s390/ism: add release function for struct device
According to device_release() in /drivers/base/core.c,
a device without a release function is a broken device
and must be fixed.
The current code directly frees the device after calling device_add()
without waiting for other kernel parts to release their references.
Thus, a reference could still be held to a struct device,
e.g., by sysfs, leading to potential use-after-free
issues if a proper release function is not set.
Published Mar 12, 2025 · Updated May 11, 2026
High · CVSS 7.8
In the Linux kernel, the following vulnerability has been resolved:
ibmvnic: Don't reference skb after sending to VIOS
Previously, after successfully flushing the xmit buffer to VIOS,
the tx_bytes stat was incremented by the length of the skb.
It is invalid to access the skb memory after sending the buffer to
the VIOS because, at any point after sending, the VIOS can trigger
an interrupt to free this memory. A race between reading skb->len
and freeing the skb is possible (especially during LPM) and will
result in use-after-free:
==================================================================
BUG: KASAN: slab-use-after-free in ibmvnic_xmit+0x75c/0x1808 [ibmvnic]
Read of size 4 at addr c00000024eb48a70 by task hxecom/14495
<...>
Call Trace:
[c000000118f66cf0] [c0000000018cba6c] dump_stack_lvl+0x84/0xe8 (unreliable)
[c000000118f66d20] [c0000000006f0080] print_report+0x1a8/0x7f0
[c000000118f66df0] [c0000000006f08f0] kasan_report+0x128/0x1f8
[c000000118f66f00] [c0000000006f2868] __asan_load4+0xac/0xe0
[c000000118f66f20] [c0080000046eac84] ibmvnic_xmit+0x75c/0x1808 [ibmvnic]
[c000000118f67340] [c0000000014be168] dev_hard_start_xmit+0x150/0x358
<...>
Freed by task 0:
kasan_save_stack+0x34/0x68
kasan_save_track+0x2c/0x50
kasan_save_free_info+0x64/0x108
__kasan_mempool_poison_object+0x148/0x2d4
napi_skb_cache_put+0x5c/0x194
net_tx_action+0x154/0x5b8
handle_softirqs+0x20c/0x60c
do_softirq_own_stack+0x6c/0x88
<...>
The buggy address belongs to the object at c00000024eb48a00 which
belongs to the cache skbuff_head_cache of size 224
==================================================================
Published Mar 12, 2025 · Updated May 11, 2026
Medium · CVSS 5.5
In the Linux kernel, the following vulnerability has been resolved:
sockmap, vsock: For connectible sockets allow only connected
sockmap expects all vsocks to have a transport assigned, which is expressed
in vsock_proto::psock_update_sk_prot(). However, there is an edge case
where an unconnected (connectible) socket may lose its previously assigned
transport. This is handled with a NULL check in the vsock/BPF recv path.
Another design detail is that listening vsocks are not supposed to have any
transport assigned at all. Which implies they are not supported by the
sockmap. But this is complicated by the fact that a socket, before
switching to TCP_LISTEN, may have had some transport assigned during a
failed connect() attempt. Hence, we may end up with a listening vsock in a
sockmap, which blows up quickly:
KASAN: null-ptr-deref in range [0x0000000000000120-0x0000000000000127]
CPU: 7 UID: 0 PID: 56 Comm: kworker/7:0 Not tainted 6.14.0-rc1+
Workqueue: vsock-loopback vsock_loopback_work
RIP: 0010:vsock_read_skb+0x4b/0x90
Call Trace:
sk_psock_verdict_data_ready+0xa4/0x2e0
virtio_transport_recv_pkt+0x1ca8/0x2acc
vsock_loopback_work+0x27d/0x3f0
process_one_work+0x846/0x1420
worker_thread+0x5b3/0xf80
kthread+0x35a/0x700
ret_from_fork+0x2d/0x70
ret_from_fork_asm+0x1a/0x30
For connectible sockets, instead of relying solely on the state of
vsk->transport, tell sockmap to only allow those representing established
connections. This aligns with the behaviour for AF_INET and AF_UNIX.
Published Mar 12, 2025 · Updated May 11, 2026
Medium · CVSS 5.5
In the Linux kernel, the following vulnerability has been resolved:
net: Add rx_skb of kfree_skb to raw_tp_null_args[].
Yan Zhai reported a BPF prog could trigger a null-ptr-deref [0]
in trace_kfree_skb if the prog does not check if rx_sk is NULL.
Commit c53795d48ee8 ("net: add rx_sk to trace_kfree_skb") added
rx_sk to trace_kfree_skb, but rx_sk is optional and could be NULL.
Let's add kfree_skb to raw_tp_null_args[] to let the BPF verifier
validate such a prog and prevent the issue.
Now we fail to load such a prog:
libbpf: prog 'drop': -- BEGIN PROG LOAD LOG --
0: R1=ctx() R10=fp0
; int BPF_PROG(drop, struct sk_buff *skb, void *location, @ kfree_skb_sk_null.bpf.c:21
0: (79) r3 = *(u64 *)(r1 +24)
func 'kfree_skb' arg3 has btf_id 5253 type STRUCT 'sock'
1: R1=ctx() R3_w=trusted_ptr_or_null_sock(id=1)
; bpf_printk("sk: %d, %d\n", sk, sk->__sk_common.skc_family); @ kfree_skb_sk_null.bpf.c:24
1: (69) r4 = *(u16 *)(r3 +16)
R3 invalid mem access 'trusted_ptr_or_null_'
processed 2 insns (limit 1000000) max_states_per_insn 0 total_states 0 peak_states 0 mark_read 0
-- END PROG LOAD LOG --
Note this fix requires commit 838a10bd2ebf ("bpf: Augment raw_tp
arguments with PTR_MAYBE_NULL").
[0]:
BUG: kernel NULL pointer dereference, address: 0000000000000010
PF: supervisor read access in kernel mode
PF: error_code(0x0000) - not-present page
PGD 0 P4D 0
PREEMPT SMP
RIP: 0010:bpf_prog_5e21a6db8fcff1aa_drop+0x10/0x2d
Call Trace:
<TASK>
? __die+0x1f/0x60
? page_fault_oops+0x148/0x420
? search_bpf_extables+0x5b/0x70
? fixup_exception+0x27/0x2c0
? exc_page_fault+0x75/0x170
? asm_exc_page_fault+0x22/0x30
? bpf_prog_5e21a6db8fcff1aa_drop+0x10/0x2d
bpf_trace_run4+0x68/0xd0
? unix_stream_connect+0x1f4/0x6f0
sk_skb_reason_drop+0x90/0x120
unix_stream_connect+0x1f4/0x6f0
__sys_connect+0x7f/0xb0
__x64_sys_connect+0x14/0x20
do_syscall_64+0x47/0xc30
entry_SYSCALL_64_after_hwframe+0x4b/0x53
Published Mar 12, 2025 · Updated May 11, 2026
Low · CVSS 3.3
In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix softlockup in arena_map_free on 64k page kernel
On an aarch64 kernel with CONFIG_PAGE_SIZE_64KB=y,
arena_htab tests cause a segmentation fault and soft lockup.
The same failure is not observed with 4k pages on aarch64.
It turns out arena_map_free() is calling
apply_to_existing_page_range() with the address returned by
bpf_arena_get_kern_vm_start(). If this address is not page-aligned
the code ends up calling apply_to_pte_range() with that unaligned
address causing soft lockup.
Fix it by round up GUARD_SZ to PAGE_SIZE << 1 so that the
division by 2 in bpf_arena_get_kern_vm_start() returns
a page-aligned value.
Published Mar 12, 2025 · Updated May 11, 2026
Medium · CVSS 5.5
In the Linux kernel, the following vulnerability has been resolved:
nvmet: Fix crash when a namespace is disabled
The namespace percpu counter protects pending I/O, and we can
only safely diable the namespace once the counter drop to zero.
Otherwise we end up with a crash when running blktests/nvme/058
(eg for loop transport):
[ 2352.930426] [ T53909] Oops: general protection fault, probably for non-canonical address 0xdffffc0000000005: 0000 [#1] PREEMPT SMP KASAN PTI
[ 2352.930431] [ T53909] KASAN: null-ptr-deref in range [0x0000000000000028-0x000000000000002f]
[ 2352.930434] [ T53909] CPU: 3 UID: 0 PID: 53909 Comm: kworker/u16:5 Tainted: G W 6.13.0-rc6 #232
[ 2352.930438] [ T53909] Tainted: [W]=WARN
[ 2352.930440] [ T53909] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-3.fc41 04/01/2014
[ 2352.930443] [ T53909] Workqueue: nvmet-wq nvme_loop_execute_work [nvme_loop]
[ 2352.930449] [ T53909] RIP: 0010:blkcg_set_ioprio+0x44/0x180
as the queue is already torn down when calling submit_bio();
So we need to init the percpu counter in nvmet_ns_enable(), and
wait for it to drop to zero in nvmet_ns_disable() to avoid having
I/O pending after the namespace has been disabled.
Published Mar 12, 2025 · Updated May 11, 2026
Medium · CVSS 5.5
In the Linux kernel, the following vulnerability has been resolved:
drm/i915/gt: Use spin_lock_irqsave() in interruptible context
spin_lock/unlock() functions used in interrupt contexts could
result in a deadlock, as seen in GitLab issue #13399,
which occurs when interrupt comes in while holding a lock.
Try to remedy the problem by saving irq state before spin lock
acquisition.
v2: add irqs' state save/restore calls to all locks/unlocks in
signal_irq_work() execution (Maciej)
v3: use with spin_lock_irqsave() in guc_lrc_desc_unpin() instead
of other lock/unlock calls and add Fixes and Cc tags (Tvrtko);
change title and commit message
(cherry picked from commit c088387ddd6482b40f21ccf23db1125e8fa4af7e)
Published Mar 12, 2025 · Updated May 11, 2026
Medium · CVSS 5.5
In the Linux kernel, the following vulnerability has been resolved:
drm/panthor: avoid garbage value in panthor_ioctl_dev_query()
'priorities_info' is uninitialized, and the uninitialized value is copied
to user object when calling PANTHOR_UOBJ_SET(). Using memset to initialize
'priorities_info' to avoid this garbage value problem.
Published Mar 7, 2025 · Updated May 11, 2026
Unknown · CVSS Not scored
In the Linux kernel, the following vulnerability has been resolved:
amdkfd: properly free gang_ctx_bo when failed to init user queue
The destructor of a gtt bo is declared as
void amdgpu_amdkfd_free_gtt_mem(struct amdgpu_device *adev, void **mem_obj);
Which takes void** as the second parameter.
GCC allows passing void* to the function because void* can be implicitly
casted to any other types, so it can pass compiling.
However, passing this void* parameter into the function's
execution process(which expects void** and dereferencing void**)
will result in errors.
Published Mar 7, 2025 · Updated May 11, 2026
Unknown · CVSS Not scored
In the Linux kernel, the following vulnerability has been resolved:
cpufreq/amd-pstate: Fix cpufreq_policy ref counting
amd_pstate_update_limits() takes a cpufreq_policy reference but doesn't
decrement the refcount in one of the exit paths, fix that.
Published Mar 7, 2025 · Updated May 11, 2026
Unknown · CVSS Not scored
In the Linux kernel, the following vulnerability has been resolved:
thermal/netlink: Prevent userspace segmentation fault by adjusting UAPI header
The intel-lpmd tool [1], which uses the THERMAL_GENL_ATTR_CPU_CAPABILITY
attribute to receive HFI events from kernel space, encounters a
segmentation fault after commit 1773572863c4 ("thermal: netlink: Add the
commands and the events for the thresholds").
The issue arises because the THERMAL_GENL_ATTR_CPU_CAPABILITY raw value
was changed while intel_lpmd still uses the old value.
Although intel_lpmd can be updated to check the THERMAL_GENL_VERSION and
use the appropriate THERMAL_GENL_ATTR_CPU_CAPABILITY value, the commit
itself is questionable.
The commit introduced a new element in the middle of enum thermal_genl_attr,
which affects many existing attributes and introduces potential risks
and unnecessary maintenance burdens for userspace thermal netlink event
users.
Solve the issue by moving the newly introduced
THERMAL_GENL_ATTR_TZ_PREV_TEMP attribute to the end of the
enum thermal_genl_attr. This ensures that all existing thermal generic
netlink attributes remain unaffected.
[ rjw: Subject edits ]
Published Mar 7, 2025 · Updated May 11, 2026
Unknown · CVSS Not scored
In the Linux kernel, the following vulnerability has been resolved:
KVM: x86: Load DR6 with guest value only before entering .vcpu_run() loop
Move the conditional loading of hardware DR6 with the guest's DR6 value
out of the core .vcpu_run() loop to fix a bug where KVM can load hardware
with a stale vcpu->arch.dr6.
When the guest accesses a DR and host userspace isn't debugging the guest,
KVM disables DR interception and loads the guest's values into hardware on
VM-Enter and saves them on VM-Exit. This allows the guest to access DRs
at will, e.g. so that a sequence of DR accesses to configure a breakpoint
only generates one VM-Exit.
For DR0-DR3, the logic/behavior is identical between VMX and SVM, and also
identical between KVM_DEBUGREG_BP_ENABLED (userspace debugging the guest)
and KVM_DEBUGREG_WONT_EXIT (guest using DRs), and so KVM handles loading
DR0-DR3 in common code, _outside_ of the core kvm_x86_ops.vcpu_run() loop.
But for DR6, the guest's value doesn't need to be loaded into hardware for
KVM_DEBUGREG_BP_ENABLED, and SVM provides a dedicated VMCB field whereas
VMX requires software to manually load the guest value, and so loading the
guest's value into DR6 is handled by {svm,vmx}_vcpu_run(), i.e. is done
_inside_ the core run loop.
Unfortunately, saving the guest values on VM-Exit is initiated by common
x86, again outside of the core run loop. If the guest modifies DR6 (in
hardware, when DR interception is disabled), and then the next VM-Exit is
a fastpath VM-Exit, KVM will reload hardware DR6 with vcpu->arch.dr6 and
clobber the guest's actual value.
The bug shows up primarily with nested VMX because KVM handles the VMX
preemption timer in the fastpath, and the window between hardware DR6
being modified (in guest context) and DR6 being read by guest software is
orders of magnitude larger in a nested setup. E.g. in non-nested, the
VMX preemption timer would need to fire precisely between #DB injection
and the #DB handler's read of DR6, whereas with a KVM-on-KVM setup, the
window where hardware DR6 is "dirty" extends all the way from L1 writing
DR6 to VMRESUME (in L1).
L1's view:
==========
<L1 disables DR interception>
CPU 0/KVM-7289 [023] d.... 2925.640961: kvm_entry: vcpu 0
A: L1 Writes DR6
CPU 0/KVM-7289 [023] d.... 2925.640963: <hack>: Set DRs, DR6 = 0xffff0ff1
B: CPU 0/KVM-7289 [023] d.... 2925.640967: kvm_exit: vcpu 0 reason EXTERNAL_INTERRUPT intr_info 0x800000ec
D: L1 reads DR6, arch.dr6 = 0
CPU 0/KVM-7289 [023] d.... 2925.640969: <hack>: Sync DRs, DR6 = 0xffff0ff0
CPU 0/KVM-7289 [023] d.... 2925.640976: kvm_entry: vcpu 0
L2 reads DR6, L1 disables DR interception
CPU 0/KVM-7289 [023] d.... 2925.640980: kvm_exit: vcpu 0 reason DR_ACCESS info1 0x0000000000000216
CPU 0/KVM-7289 [023] d.... 2925.640983: kvm_entry: vcpu 0
CPU 0/KVM-7289 [023] d.... 2925.640983: <hack>: Set DRs, DR6 = 0xffff0ff0
L2 detects failure
CPU 0/KVM-7289 [023] d.... 2925.640987: kvm_exit: vcpu 0 reason HLT
L1 reads DR6 (confirms failure)
CPU 0/KVM-7289 [023] d.... 2925.640990: <hack>: Sync DRs, DR6 = 0xffff0ff0
L0's view:
==========
L2 reads DR6, arch.dr6 = 0
CPU 23/KVM-5046 [001] d.... 3410.005610: kvm_exit: vcpu 23 reason DR_ACCESS info1 0x0000000000000216
CPU 23/KVM-5046 [001] ..... 3410.005610: kvm_nested_vmexit: vcpu 23 reason DR_ACCESS info1 0x0000000000000216
L2 => L1 nested VM-Exit
CPU 23/KVM-5046 [001] ..... 3410.005610: kvm_nested_vmexit_inject: reason: DR_ACCESS ext_inf1: 0x0000000000000216
CPU 23/KVM-5046 [001] d.... 3410.005610: kvm_entry: vcpu 23
CPU 23/KVM-5046 [001] d.... 3410.005611: kvm_exit: vcpu 23 reason VMREAD
CPU 23/KVM-5046 [001] d.... 3410.005611: kvm_entry: vcpu 23
CPU 23/KVM-5046 [001] d.... 3410.
---truncated---
Published Mar 7, 2025 · Updated May 11, 2026
Unknown · CVSS Not scored
In the Linux kernel, the following vulnerability has been resolved:
usb: gadget: core: flush gadget workqueue after device removal
device_del() can lead to new work being scheduled in gadget->work
workqueue. This is observed, for example, with the dwc3 driver with the
following call stack:
device_del()
gadget_unbind_driver()
usb_gadget_disconnect_locked()
dwc3_gadget_pullup()
dwc3_gadget_soft_disconnect()
usb_gadget_set_state()
schedule_work(&gadget->work)
Move flush_work() after device_del() to ensure the workqueue is cleaned
up.
Published Mar 7, 2025 · Updated May 11, 2026
Unknown · CVSS Not scored
In the Linux kernel, the following vulnerability has been resolved:
io_uring/kbuf: reallocate buf lists on upgrade
IORING_REGISTER_PBUF_RING can reuse an old struct io_buffer_list if it
was created for legacy selected buffer and has been emptied. It violates
the requirement that most of the field should stay stable after publish.
Always reallocate it instead.
Published Mar 7, 2025 · Updated May 11, 2026
Unknown · CVSS Not scored
In the Linux kernel, the following vulnerability has been resolved:
seccomp: passthrough uretprobe systemcall without filtering
When attaching uretprobes to processes running inside docker, the attached
process is segfaulted when encountering the retprobe.
The reason is that now that uretprobe is a system call the default seccomp
filters in docker block it as they only allow a specific set of known
syscalls. This is true for other userspace applications which use seccomp
to control their syscall surface.
Since uretprobe is a "kernel implementation detail" system call which is
not used by userspace application code directly, it is impractical and
there's very little point in forcing all userspace applications to
explicitly allow it in order to avoid crashing tracked processes.
Pass this systemcall through seccomp without depending on configuration.
Note: uretprobe is currently only x86_64 and isn't expected to ever be
supported in i386.
[kees: minimized changes for easier backporting, tweaked commit log]
Published Mar 6, 2025 · Updated May 11, 2026
Medium · CVSS 5.5
In the Linux kernel, the following vulnerability has been resolved:
iommu/vt-d: Avoid use of NULL after WARN_ON_ONCE
There is a WARN_ON_ONCE to catch an unlikely situation when
domain_remove_dev_pasid can't find the `pasid`. In case it nevertheless
happens we must avoid using a NULL pointer.
Published Mar 6, 2025 · Updated May 11, 2026
Unknown · CVSS Not scored
In the Linux kernel, the following vulnerability has been resolved:
block: don't revert iter for -EIOCBQUEUED
blkdev_read_iter() has a few odd checks, like gating the position and
count adjustment on whether or not the result is bigger-than-or-equal to
zero (where bigger than makes more sense), and not checking the return
value of blkdev_direct_IO() before doing an iov_iter_revert(). The
latter can lead to attempting to revert with a negative value, which
when passed to iov_iter_revert() as an unsigned value will lead to
throwing a WARN_ON() because unroll is bigger than MAX_RW_COUNT.
Be sane and don't revert for -EIOCBQUEUED, like what is done in other
spots.
Published Mar 6, 2025 · Updated May 11, 2026
Unknown · CVSS Not scored
In the Linux kernel, the following vulnerability has been resolved:
PCI: Avoid putting some root ports into D3 on TUXEDO Sirius Gen1
commit 9d26d3a8f1b0 ("PCI: Put PCIe ports into D3 during suspend") sets the
policy that all PCIe ports are allowed to use D3. When the system is
suspended if the port is not power manageable by the platform and won't be
used for wakeup via a PME this sets up the policy for these ports to go
into D3hot.
This policy generally makes sense from an OSPM perspective but it leads to
problems with wakeup from suspend on the TUXEDO Sirius 16 Gen 1 with a
specific old BIOS. This manifests as a system hang.
On the affected Device + BIOS combination, add a quirk for the root port of
the problematic controller to ensure that these root ports are not put into
D3hot at suspend.
This patch is based on
https://lore.kernel.org/linux-pci/20230708214457.1229-2-mario.limonciello@amd.com
but with the added condition both in the documentation and in the code to
apply only to the TUXEDO Sirius 16 Gen 1 with a specific old BIOS and only
the affected root ports.
Published Mar 6, 2025 · Updated May 11, 2026
Unknown · CVSS Not scored
In the Linux kernel, the following vulnerability has been resolved:
landlock: Handle weird files
A corrupted filesystem (e.g. bcachefs) might return weird files.
Instead of throwing a warning and allowing access to such file, treat
them as regular files.
Published Mar 6, 2025 · Updated May 11, 2026
Unknown · CVSS Not scored
In the Linux kernel, the following vulnerability has been resolved:
RDMA/rxe: Fix the warning "__rxe_cleanup+0x12c/0x170 [rdma_rxe]"
The Call Trace is as below:
"
<TASK>
? show_regs.cold+0x1a/0x1f
? __rxe_cleanup+0x12c/0x170 [rdma_rxe]
? __warn+0x84/0xd0
? __rxe_cleanup+0x12c/0x170 [rdma_rxe]
? report_bug+0x105/0x180
? handle_bug+0x46/0x80
? exc_invalid_op+0x19/0x70
? asm_exc_invalid_op+0x1b/0x20
? __rxe_cleanup+0x12c/0x170 [rdma_rxe]
? __rxe_cleanup+0x124/0x170 [rdma_rxe]
rxe_destroy_qp.cold+0x24/0x29 [rdma_rxe]
ib_destroy_qp_user+0x118/0x190 [ib_core]
rdma_destroy_qp.cold+0x43/0x5e [rdma_cm]
rtrs_cq_qp_destroy.cold+0x1d/0x2b [rtrs_core]
rtrs_srv_close_work.cold+0x1b/0x31 [rtrs_server]
process_one_work+0x21d/0x3f0
worker_thread+0x4a/0x3c0
? process_one_work+0x3f0/0x3f0
kthread+0xf0/0x120
? kthread_complete_and_exit+0x20/0x20
ret_from_fork+0x22/0x30
</TASK>
"
When too many rdma resources are allocated, rxe needs more time to
handle these rdma resources. Sometimes with the current timeout, rxe
can not release the rdma resources correctly.
Compared with other rdma drivers, a bigger timeout is used.
Published Mar 6, 2025 · Updated May 11, 2026
Unknown · CVSS Not scored
In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: don't flush non-uploaded STAs
If STA state is pre-moved to AUTHORIZED (such as in IBSS
scenarios) and insertion fails, the station is freed.
In this case, the driver never knew about the station,
so trying to flush it is unexpected and may crash.
Check if the sta was uploaded to the driver before and
fix this.
Published Mar 6, 2025 · Updated May 11, 2026
Unknown · CVSS Not scored
In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: btusb: mediatek: Add locks for usb_driver_claim_interface()
The documentation for usb_driver_claim_interface() says that "the
device lock" is needed when the function is called from places other
than probe(). This appears to be the lock for the USB interface
device. The Mediatek btusb code gets called via this path:
Workqueue: hci0 hci_power_on [bluetooth]
Call trace:
usb_driver_claim_interface
btusb_mtk_claim_iso_intf
btusb_mtk_setup
hci_dev_open_sync
hci_power_on
process_scheduled_works
worker_thread
kthread
With the above call trace the device lock hasn't been claimed. Claim
it.
Without this fix, we'd sometimes see the error "Failed to claim iso
interface". Sometimes we'd even see worse errors, like a NULL pointer
dereference (where `intf->dev.driver` was NULL) with a trace like:
Call trace:
usb_suspend_both
usb_runtime_suspend
__rpm_callback
rpm_suspend
pm_runtime_work
process_scheduled_works
Both errors appear to be fixed with the proper locking.
Published Mar 6, 2025 · Updated May 11, 2026
Unknown · CVSS Not scored
In the Linux kernel, the following vulnerability has been resolved:
bpf: Cancel the running bpf_timer through kworker for PREEMPT_RT
During the update procedure, when overwrite element in a pre-allocated
htab, the freeing of old_element is protected by the bucket lock. The
reason why the bucket lock is necessary is that the old_element has
already been stashed in htab->extra_elems after alloc_htab_elem()
returns. If freeing the old_element after the bucket lock is unlocked,
the stashed element may be reused by concurrent update procedure and the
freeing of old_element will run concurrently with the reuse of the
old_element. However, the invocation of check_and_free_fields() may
acquire a spin-lock which violates the lockdep rule because its caller
has already held a raw-spin-lock (bucket lock). The following warning
will be reported when such race happens:
BUG: scheduling while atomic: test_progs/676/0x00000003
3 locks held by test_progs/676:
#0: ffffffff864b0240 (rcu_read_lock_trace){....}-{0:0}, at: bpf_prog_test_run_syscall+0x2c0/0x830
#1: ffff88810e961188 (&htab->lockdep_key){....}-{2:2}, at: htab_map_update_elem+0x306/0x1500
#2: ffff8881f4eac1b8 (&base->softirq_expiry_lock){....}-{2:2}, at: hrtimer_cancel_wait_running+0xe9/0x1b0
Modules linked in: bpf_testmod(O)
Preemption disabled at:
[<ffffffff817837a3>] htab_map_update_elem+0x293/0x1500
CPU: 0 UID: 0 PID: 676 Comm: test_progs Tainted: G ... 6.12.0+ #11
Tainted: [W]=WARN, [O]=OOT_MODULE
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996)...
Call Trace:
<TASK>
dump_stack_lvl+0x57/0x70
dump_stack+0x10/0x20
__schedule_bug+0x120/0x170
__schedule+0x300c/0x4800
schedule_rtlock+0x37/0x60
rtlock_slowlock_locked+0x6d9/0x54c0
rt_spin_lock+0x168/0x230
hrtimer_cancel_wait_running+0xe9/0x1b0
hrtimer_cancel+0x24/0x30
bpf_timer_delete_work+0x1d/0x40
bpf_timer_cancel_and_free+0x5e/0x80
bpf_obj_free_fields+0x262/0x4a0
check_and_free_fields+0x1d0/0x280
htab_map_update_elem+0x7fc/0x1500
bpf_prog_9f90bc20768e0cb9_overwrite_cb+0x3f/0x43
bpf_prog_ea601c4649694dbd_overwrite_timer+0x5d/0x7e
bpf_prog_test_run_syscall+0x322/0x830
__sys_bpf+0x135d/0x3ca0
__x64_sys_bpf+0x75/0xb0
x64_sys_call+0x1b5/0xa10
do_syscall_64+0x3b/0xc0
entry_SYSCALL_64_after_hwframe+0x4b/0x53
...
</TASK>
It seems feasible to break the reuse and refill of per-cpu extra_elems
into two independent parts: reuse the per-cpu extra_elems with bucket
lock being held and refill the old_element as per-cpu extra_elems after
the bucket lock is unlocked. However, it will make the concurrent
overwrite procedures on the same CPU return unexpected -E2BIG error when
the map is full.
Therefore, the patch fixes the lock problem by breaking the cancelling
of bpf_timer into two steps for PREEMPT_RT:
1) use hrtimer_try_to_cancel() and check its return value
2) if the timer is running, use hrtimer_cancel() through a kworker to
cancel it again
Considering that the current implementation of hrtimer_cancel() will try
to acquire a being held softirq_expiry_lock when the current timer is
running, these steps above are reasonable. However, it also has
downside. When the timer is running, the cancelling of the timer is
delayed when releasing the last map uref. The delay is also fixable
(e.g., break the cancelling of bpf timer into two parts: one part in
locked scope, another one in unlocked scope), it can be revised later if
necessary.
It is a bit hard to decide the right fix tag. One reason is that the
problem depends on PREEMPT_RT which is enabled in v6.12. Considering the
softirq_expiry_lock lock exists since v5.4 and bpf_timer is introduced
in v5.15, the bpf_timer commit is used in the fixes tag and an extra
depends-on tag is added to state the dependency on PREEMPT_RT.
Depends-on: v6.12+ with PREEMPT_RT enabled
Published Mar 6, 2025 · Updated May 11, 2026
Medium · CVSS 6.1
IBM Sterling Partner Engagement Manager 6.2.3.0 through 6.2.3.5 and 6.2.4.0 through 6.2.4.2 is vulnerable to cross-site scripting. This vulnerability allows an authenticated user to embed arbitrary JavaScript code in the Web UI thus altering the intended functionality potentially leading to credentials disclosure within a trusted session.
Published Mar 13, 2026 · Updated May 10, 2026
Critical · CVSS 9.8
An issue pertaining to CWE-259: Use of Hard-coded Password was discovered in oslabs-beta ThermaKube master.
Published Mar 11, 2026 · Updated May 10, 2026
Medium · CVSS 5.4
An issue pertaining to CWE-79: Improper Neutralization of Input During Web Page Generation was discovered in YMFE yapi v1.12.0.
Published Mar 9, 2026 · Updated May 10, 2026
Medium · CVSS 5.5
Cohesity TranZman Migration Appliance Release 4.0 Build 14614 was discovered to use a weak cryptography algorithm for data encryption, allowing attackers to trivially reverse the encyption and expose credentials.
Published Mar 3, 2026 · Updated May 10, 2026
Medium · CVSS 4.9
A flaw was found in Keycloak. When the configuration uses JWT tokens for authentication, the tokens are cached until expiration. If a client uses JWT tokens with an excessively long expiration time, for example, 24 or 48 hours, the cache can grow indefinitely, leading to an OutOfMemoryError. This issue could result in a denial of service condition, preventing legitimate users from accessing the system.
Published Mar 25, 2025 · Updated May 6, 2026
High · CVSS 7.5
A flaw was found in Smallrye, where smallrye-fault-tolerance is vulnerable to an out-of-memory (OOM) issue. This vulnerability is externally triggered when calling the metrics URI. Every call creates a new object within meterMap and may lead to a denial of service (DoS) issue.
Published Mar 12, 2025 · Updated May 6, 2026
High · CVSS 7.1
Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') vulnerability in tagDiv tagDiv Composer td-composer allows Reflected XSS.This issue affects tagDiv Composer: from n/a through <= 5.4.2.
Published Mar 19, 2026 · Updated Apr 29, 2026
Medium · CVSS 5.8
Insertion of Sensitive Information Into Sent Data vulnerability in Roland Murg WP Booking System wp-booking-system allows Retrieve Embedded Sensitive Data.This issue affects WP Booking System: from n/a through <= 2.0.19.12.
Published Mar 5, 2026 · Updated Apr 29, 2026
Medium · CVSS 6.5
Authorization Bypass Through User-Controlled Key vulnerability in Themeum Tutor LMS tutor allows Exploiting Incorrectly Configured Access Control Security Levels.This issue affects Tutor LMS: from n/a through <= 3.9.4.
Published Mar 19, 2026 · Updated Apr 29, 2026
High · CVSS 7.1
Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') vulnerability in Arrow Plugins Arrow Maps ap-google-maps allows Reflected XSS.This issue affects Arrow Maps: from n/a through <= 1.0.9.
Published Mar 26, 2025 · Updated Apr 29, 2026
High · CVSS 8.5
Improper Neutralization of Special Elements used in an SQL Command ('SQL Injection') vulnerability in Aldo Latino PrivateContent private-content.This issue affects PrivateContent: from n/a through <= 8.11.4.
Published Mar 15, 2025 · Updated Apr 29, 2026
Medium · CVSS 6.5
Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') vulnerability in antrouss UniTimetable unitimetable allows Stored XSS.This issue affects UniTimetable: from n/a through <= 1.1.
Published Mar 3, 2025 · Updated Apr 29, 2026
High · CVSS 7.1
Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') vulnerability in HasThemes WP Templata wptemplata allows Reflected XSS.This issue affects WP Templata: from n/a through <= 1.0.7.
Published Mar 3, 2025 · Updated Apr 29, 2026
