Unknown · CVSS Not scored
In the Linux kernel, the following vulnerability has been resolved:
nfsd: fix legacy client tracking initialization
Get rid of the nfsd4_legacy_tracking_ops->init() call in
check_for_legacy_methods(). That will be handled in the caller
(nfsd4_client_tracking_init()). Otherwise, we'll wind up calling
nfsd4_legacy_tracking_ops->init() twice, and the second time we'll
trigger the BUG_ON() in nfsd4_init_recdir().
Published Apr 16, 2025 · Updated May 11, 2026
Medium · CVSS 4.3
Cross-Site Request Forgery (CSRF) vulnerability in YITHEMES YITH WooCommerce Compare yith-woocommerce-compare.This issue affects YITH WooCommerce Compare: from n/a through <= 2.37.0.
Published Apr 24, 2024 · Updated May 11, 2026
Medium · CVSS 6.5
Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') vulnerability in HappyMonster Happy Addons for Elementor happy-elementor-addons.This issue affects Happy Addons for Elementor: from n/a through <= 3.10.4.
Published Apr 22, 2024 · Updated May 11, 2026
Unknown · CVSS Not scored
In the Linux kernel, the following vulnerability has been resolved:
smb: client: fix potential UAF in cifs_debug_files_proc_show()
Skip sessions that are being teared down (status == SES_EXITING) to
avoid UAF.
Published Apr 28, 2024 · Updated May 11, 2026
High · CVSS 8.4
In the Linux kernel, the following vulnerability has been resolved:
ASoC: SOF: Add some bounds checking to firmware data
Smatch complains about "head->full_size - head->header_size" can
underflow. To some extent, we're always going to have to trust the
firmware a bit. However, it's easy enough to add a check for negatives,
and let's add a upper bounds check as well.
Published Apr 28, 2024 · Updated May 11, 2026
Medium · CVSS 6.2
In the Linux kernel, the following vulnerability has been resolved:
PCI: Fix active state requirement in PME polling
The commit noted in fixes added a bogus requirement that runtime PM managed
devices need to be in the RPM_ACTIVE state for PME polling. In fact, only
devices in low power states should be polled.
However there's still a requirement that the device config space must be
accessible, which has implications for both the current state of the polled
device and the parent bridge, when present. It's not sufficient to assume
the bridge remains in D0 and cases have been observed where the bridge
passes the D0 test, but the PM state indicates RPM_SUSPENDING and config
space of the polled device becomes inaccessible during pci_pme_wakeup().
Therefore, since the bridge is already effectively required to be in the
RPM_ACTIVE state, formalize this in the code and elevate the PM usage count
to maintain the state while polling the subordinate device.
This resolves a regression reported in the bugzilla below where a
Thunderbolt/USB4 hierarchy fails to scan for an attached NVMe endpoint
downstream of a bridge in a D3hot power state.
Published Apr 17, 2024 · Updated May 11, 2026
Medium · CVSS 5.5
In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: Reset IH OVERFLOW_CLEAR bit
Allows us to detect subsequent IH ring buffer overflows as well.
Published Apr 17, 2024 · Updated May 11, 2026
Unknown · CVSS Not scored
In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Fix dcn35 8k30 Underflow/Corruption Issue
[why]
odm calculation is missing for pipe split policy determination
and cause Underflow/Corruption issue.
[how]
Add the odm calculation.
Published Apr 17, 2024 · Updated May 11, 2026
Unknown · CVSS Not scored
In the Linux kernel, the following vulnerability has been resolved:
drm/nouveau: fix several DMA buffer leaks
Nouveau manages GSP-RM DMA buffers with nvkm_gsp_mem objects. Several of
these buffers are never dealloced. Some of them can be deallocated
right after GSP-RM is initialized, but the rest need to stay until the
driver unloads.
Also futher bullet-proof these objects by poisoning the buffer and
clearing the nvkm_gsp_mem object when it is deallocated. Poisoning
the buffer should trigger an error (or crash) from GSP-RM if it tries
to access the buffer after we've deallocated it, because we were wrong
about when it is safe to deallocate.
Finally, change the mem->size field to a size_t because that's the same
type that dma_alloc_coherent expects.
Published Apr 17, 2024 · Updated May 11, 2026
Unknown · CVSS Not scored
In the Linux kernel, the following vulnerability has been resolved:
perf: RISCV: Fix panic on pmu overflow handler
(1 << idx) of int is not desired when setting bits in unsigned long
overflowed_ctrs, use BIT() instead. This panic happens when running
'perf record -e branches' on sophgo sg2042.
[ 273.311852] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000098
[ 273.320851] Oops [#1]
[ 273.323179] Modules linked in:
[ 273.326303] CPU: 0 PID: 1475 Comm: perf Not tainted 6.6.0-rc3+ #9
[ 273.332521] Hardware name: Sophgo Mango (DT)
[ 273.336878] epc : riscv_pmu_ctr_get_width_mask+0x8/0x62
[ 273.342291] ra : pmu_sbi_ovf_handler+0x2e0/0x34e
[ 273.347091] epc : ffffffff80aecd98 ra : ffffffff80aee056 sp : fffffff6e36928b0
[ 273.354454] gp : ffffffff821f82d0 tp : ffffffd90c353200 t0 : 0000002ade4f9978
[ 273.361815] t1 : 0000000000504d55 t2 : ffffffff8016cd8c s0 : fffffff6e3692a70
[ 273.369180] s1 : 0000000000000020 a0 : 0000000000000000 a1 : 00001a8e81800000
[ 273.376540] a2 : 0000003c00070198 a3 : 0000003c00db75a4 a4 : 0000000000000015
[ 273.383901] a5 : ffffffd7ff8804b0 a6 : 0000000000000015 a7 : 000000000000002a
[ 273.391327] s2 : 000000000000ffff s3 : 0000000000000000 s4 : ffffffd7ff8803b0
[ 273.398773] s5 : 0000000000504d55 s6 : ffffffd905069800 s7 : ffffffff821fe210
[ 273.406139] s8 : 000000007fffffff s9 : ffffffd7ff8803b0 s10: ffffffd903f29098
[ 273.413660] s11: 0000000080000000 t3 : 0000000000000003 t4 : ffffffff8017a0ca
[ 273.421022] t5 : ffffffff8023cfc2 t6 : ffffffd9040780e8
[ 273.426437] status: 0000000200000100 badaddr: 0000000000000098 cause: 000000000000000d
[ 273.434512] [<ffffffff80aecd98>] riscv_pmu_ctr_get_width_mask+0x8/0x62
[ 273.441169] [<ffffffff80076bd8>] handle_percpu_devid_irq+0x98/0x1ee
[ 273.447562] [<ffffffff80071158>] generic_handle_domain_irq+0x28/0x36
[ 273.454151] [<ffffffff8047a99a>] riscv_intc_irq+0x36/0x4e
[ 273.459659] [<ffffffff80c944de>] handle_riscv_irq+0x4a/0x74
[ 273.465442] [<ffffffff80c94c48>] do_irq+0x62/0x92
[ 273.470360] Code: 0420 60a2 6402 5529 0141 8082 0013 0000 0013 0000 (6d5c) b783
[ 273.477921] ---[ end trace 0000000000000000 ]---
[ 273.482630] Kernel panic - not syncing: Fatal exception in interrupt
Published Apr 17, 2024 · Updated May 11, 2026
Unknown · CVSS Not scored
In the Linux kernel, the following vulnerability has been resolved:
md: fix kmemleak of rdev->serial
If kobject_add() is fail in bind_rdev_to_array(), 'rdev->serial' will be
alloc not be freed, and kmemleak occurs.
unreferenced object 0xffff88815a350000 (size 49152):
comm "mdadm", pid 789, jiffies 4294716910
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace (crc f773277a):
[<0000000058b0a453>] kmemleak_alloc+0x61/0xe0
[<00000000366adf14>] __kmalloc_large_node+0x15e/0x270
[<000000002e82961b>] __kmalloc_node.cold+0x11/0x7f
[<00000000f206d60a>] kvmalloc_node+0x74/0x150
[<0000000034bf3363>] rdev_init_serial+0x67/0x170
[<0000000010e08fe9>] mddev_create_serial_pool+0x62/0x220
[<00000000c3837bf0>] bind_rdev_to_array+0x2af/0x630
[<0000000073c28560>] md_add_new_disk+0x400/0x9f0
[<00000000770e30ff>] md_ioctl+0x15bf/0x1c10
[<000000006cfab718>] blkdev_ioctl+0x191/0x3f0
[<0000000085086a11>] vfs_ioctl+0x22/0x60
[<0000000018b656fe>] __x64_sys_ioctl+0xba/0xe0
[<00000000e54e675e>] do_syscall_64+0x71/0x150
[<000000008b0ad622>] entry_SYSCALL_64_after_hwframe+0x6c/0x74
Published Apr 17, 2024 · Updated May 11, 2026
Unknown · CVSS Not scored
In the Linux kernel, the following vulnerability has been resolved:
block: fix deadlock between bd_link_disk_holder and partition scan
'open_mutex' of gendisk is used to protect open/close block devices. But
in bd_link_disk_holder(), it is used to protect the creation of symlink
between holding disk and slave bdev, which introduces some issues.
When bd_link_disk_holder() is called, the driver is usually in the process
of initialization/modification and may suspend submitting io. At this
time, any io hold 'open_mutex', such as scanning partitions, can cause
deadlocks. For example, in raid:
T1 T2
bdev_open_by_dev
lock open_mutex [1]
...
efi_partition
...
md_submit_bio
md_ioctl mddev_syspend
-> suspend all io
md_add_new_disk
bind_rdev_to_array
bd_link_disk_holder
try lock open_mutex [2]
md_handle_request
-> wait mddev_resume
T1 scan partition, T2 add a new device to raid. T1 waits for T2 to resume
mddev, but T2 waits for open_mutex held by T1. Deadlock occurs.
Fix it by introducing a local mutex 'blk_holder_mutex' to replace
'open_mutex'.
Published Apr 17, 2024 · Updated May 11, 2026
Unknown · CVSS Not scored
In the Linux kernel, the following vulnerability has been resolved:
wifi: wfx: fix memory leak when starting AP
Kmemleak reported this error:
unreferenced object 0xd73d1180 (size 184):
comm "wpa_supplicant", pid 1559, jiffies 13006305 (age 964.245s)
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 1e 00 01 00 00 00 00 00 ................
backtrace:
[<5ca11420>] kmem_cache_alloc+0x20c/0x5ac
[<127bdd74>] __alloc_skb+0x144/0x170
[<fb8a5e38>] __netdev_alloc_skb+0x50/0x180
[<0f9fa1d5>] __ieee80211_beacon_get+0x290/0x4d4 [mac80211]
[<7accd02d>] ieee80211_beacon_get_tim+0x54/0x18c [mac80211]
[<41e25cc3>] wfx_start_ap+0xc8/0x234 [wfx]
[<93a70356>] ieee80211_start_ap+0x404/0x6b4 [mac80211]
[<a4a661cd>] nl80211_start_ap+0x76c/0x9e0 [cfg80211]
[<47bd8b68>] genl_rcv_msg+0x198/0x378
[<453ef796>] netlink_rcv_skb+0xd0/0x130
[<6b7c977a>] genl_rcv+0x34/0x44
[<66b2d04d>] netlink_unicast+0x1b4/0x258
[<f965b9b6>] netlink_sendmsg+0x1e8/0x428
[<aadb8231>] ____sys_sendmsg+0x1e0/0x274
[<d2b5212d>] ___sys_sendmsg+0x80/0xb4
[<69954f45>] __sys_sendmsg+0x64/0xa8
unreferenced object 0xce087000 (size 1024):
comm "wpa_supplicant", pid 1559, jiffies 13006305 (age 964.246s)
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
10 00 07 40 00 00 00 00 00 00 00 00 00 00 00 00 ...@............
backtrace:
[<9a993714>] __kmalloc_track_caller+0x230/0x600
[<f83ea192>] kmalloc_reserve.constprop.0+0x30/0x74
[<a2c61343>] __alloc_skb+0xa0/0x170
[<fb8a5e38>] __netdev_alloc_skb+0x50/0x180
[<0f9fa1d5>] __ieee80211_beacon_get+0x290/0x4d4 [mac80211]
[<7accd02d>] ieee80211_beacon_get_tim+0x54/0x18c [mac80211]
[<41e25cc3>] wfx_start_ap+0xc8/0x234 [wfx]
[<93a70356>] ieee80211_start_ap+0x404/0x6b4 [mac80211]
[<a4a661cd>] nl80211_start_ap+0x76c/0x9e0 [cfg80211]
[<47bd8b68>] genl_rcv_msg+0x198/0x378
[<453ef796>] netlink_rcv_skb+0xd0/0x130
[<6b7c977a>] genl_rcv+0x34/0x44
[<66b2d04d>] netlink_unicast+0x1b4/0x258
[<f965b9b6>] netlink_sendmsg+0x1e8/0x428
[<aadb8231>] ____sys_sendmsg+0x1e0/0x274
[<d2b5212d>] ___sys_sendmsg+0x80/0xb4
However, since the kernel is build optimized, it seems the stack is not
accurate. It appears the issue is related to wfx_set_mfp_ap(). The issue
is obvious in this function: memory allocated by ieee80211_beacon_get()
is never released. Fixing this leak makes kmemleak happy.
Published Apr 17, 2024 · Updated May 11, 2026
Unknown · CVSS Not scored
In the Linux kernel, the following vulnerability has been resolved:
firmware: arm_scmi: Fix double free in SMC transport cleanup path
When the generic SCMI code tears down a channel, it calls the chan_free
callback function, defined by each transport. Since multiple protocols
might share the same transport_info member, chan_free() might want to
clean up the same member multiple times within the given SCMI transport
implementation. In this case, it is SMC transport. This will lead to a NULL
pointer dereference at the second time:
| scmi_protocol scmi_dev.1: Enabled polling mode TX channel - prot_id:16
| arm-scmi firmware:scmi: SCMI Notifications - Core Enabled.
| arm-scmi firmware:scmi: unable to communicate with SCMI
| Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000
| Mem abort info:
| ESR = 0x0000000096000004
| EC = 0x25: DABT (current EL), IL = 32 bits
| SET = 0, FnV = 0
| EA = 0, S1PTW = 0
| FSC = 0x04: level 0 translation fault
| Data abort info:
| ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000
| CM = 0, WnR = 0, TnD = 0, TagAccess = 0
| GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0
| user pgtable: 4k pages, 48-bit VAs, pgdp=0000000881ef8000
| [0000000000000000] pgd=0000000000000000, p4d=0000000000000000
| Internal error: Oops: 0000000096000004 [#1] PREEMPT SMP
| Modules linked in:
| CPU: 4 PID: 1 Comm: swapper/0 Not tainted 6.7.0-rc2-00124-g455ef3d016c9-dirty #793
| Hardware name: FVP Base RevC (DT)
| pstate: 61400009 (nZCv daif +PAN -UAO -TCO +DIT -SSBS BTYPE=--)
| pc : smc_chan_free+0x3c/0x6c
| lr : smc_chan_free+0x3c/0x6c
| Call trace:
| smc_chan_free+0x3c/0x6c
| idr_for_each+0x68/0xf8
| scmi_cleanup_channels.isra.0+0x2c/0x58
| scmi_probe+0x434/0x734
| platform_probe+0x68/0xd8
| really_probe+0x110/0x27c
| __driver_probe_device+0x78/0x12c
| driver_probe_device+0x3c/0x118
| __driver_attach+0x74/0x128
| bus_for_each_dev+0x78/0xe0
| driver_attach+0x24/0x30
| bus_add_driver+0xe4/0x1e8
| driver_register+0x60/0x128
| __platform_driver_register+0x28/0x34
| scmi_driver_init+0x84/0xc0
| do_one_initcall+0x78/0x33c
| kernel_init_freeable+0x2b8/0x51c
| kernel_init+0x24/0x130
| ret_from_fork+0x10/0x20
| Code: f0004701 910a0021 aa1403e5 97b91c70 (b9400280)
| ---[ end trace 0000000000000000 ]---
Simply check for the struct pointer being NULL before trying to access
its members, to avoid this situation.
This was found when a transport doesn't really work (for instance no SMC
service), the probe routines then tries to clean up, and triggers a crash.
Published Apr 17, 2024 · Updated May 11, 2026
Unknown · CVSS Not scored
In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: btusb: Fix memory leak
This checks if CONFIG_DEV_COREDUMP is enabled before attempting to clone
the skb and also make sure btmtk_process_coredump frees the skb passed
following the same logic.
Published Apr 17, 2024 · Updated May 11, 2026
Unknown · CVSS Not scored
In the Linux kernel, the following vulnerability has been resolved:
clk: meson: Add missing clocks to axg_clk_regmaps
Some clocks were missing from axg_clk_regmaps, which caused kernel panic
during cat /sys/kernel/debug/clk/clk_summary
[ 57.349402] Unable to handle kernel NULL pointer dereference at virtual address 00000000000001fc
...
[ 57.430002] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 57.436900] pc : regmap_read+0x1c/0x88
[ 57.440608] lr : clk_regmap_gate_is_enabled+0x3c/0xb0
[ 57.445611] sp : ffff800082f1b690
[ 57.448888] x29: ffff800082f1b690 x28: 0000000000000000 x27: ffff800080eb9a70
[ 57.455961] x26: 0000000000000007 x25: 0000000000000016 x24: 0000000000000000
[ 57.463033] x23: ffff800080e8b488 x22: 0000000000000015 x21: ffff00000e7e7000
[ 57.470106] x20: ffff00000400ec00 x19: 0000000000000000 x18: ffffffffffffffff
[ 57.477178] x17: 0000000000000000 x16: 0000000000000000 x15: ffff0000042a3000
[ 57.484251] x14: 0000000000000000 x13: ffff0000042a2fec x12: 0000000005f5e100
[ 57.491323] x11: abcc77118461cefd x10: 0000000000000020 x9 : ffff8000805e4b24
[ 57.498396] x8 : ffff0000028063c0 x7 : ffff800082f1b710 x6 : ffff800082f1b710
[ 57.505468] x5 : 00000000ffffffd0 x4 : ffff800082f1b6e0 x3 : 0000000000001000
[ 57.512541] x2 : ffff800082f1b6e4 x1 : 000000000000012c x0 : 0000000000000000
[ 57.519615] Call trace:
[ 57.522030] regmap_read+0x1c/0x88
[ 57.525393] clk_regmap_gate_is_enabled+0x3c/0xb0
[ 57.530050] clk_core_is_enabled+0x44/0x120
[ 57.534190] clk_summary_show_subtree+0x154/0x2f0
[ 57.538847] clk_summary_show_subtree+0x220/0x2f0
[ 57.543505] clk_summary_show_subtree+0x220/0x2f0
[ 57.548162] clk_summary_show_subtree+0x220/0x2f0
[ 57.552820] clk_summary_show_subtree+0x220/0x2f0
[ 57.557477] clk_summary_show_subtree+0x220/0x2f0
[ 57.562135] clk_summary_show_subtree+0x220/0x2f0
[ 57.566792] clk_summary_show_subtree+0x220/0x2f0
[ 57.571450] clk_summary_show+0x84/0xb8
[ 57.575245] seq_read_iter+0x1bc/0x4b8
[ 57.578954] seq_read+0x8c/0xd0
[ 57.582059] full_proxy_read+0x68/0xc8
[ 57.585767] vfs_read+0xb0/0x268
[ 57.588959] ksys_read+0x70/0x108
[ 57.592236] __arm64_sys_read+0x24/0x38
[ 57.596031] invoke_syscall+0x50/0x128
[ 57.599740] el0_svc_common.constprop.0+0x48/0xf8
[ 57.604397] do_el0_svc+0x28/0x40
[ 57.607675] el0_svc+0x34/0xb8
[ 57.610694] el0t_64_sync_handler+0x13c/0x158
[ 57.615006] el0t_64_sync+0x190/0x198
[ 57.618635] Code: a9bd7bfd 910003fd a90153f3 aa0003f3 (b941fc00)
[ 57.624668] ---[ end trace 0000000000000000 ]---
[jbrunet: add missing Fixes tag]
Published Apr 17, 2024 · Updated May 11, 2026
Unknown · CVSS Not scored
In the Linux kernel, the following vulnerability has been resolved:
drm/bridge: adv7511: fix crash on irq during probe
Moved IRQ registration down to end of adv7511_probe().
If an IRQ already is pending during adv7511_probe
(before adv7511_cec_init) then cec_received_msg_ts
could crash using uninitialized data:
Unable to handle kernel read from unreadable memory at virtual address 00000000000003d5
Internal error: Oops: 96000004 [#1] PREEMPT_RT SMP
Call trace:
cec_received_msg_ts+0x48/0x990 [cec]
adv7511_cec_irq_process+0x1cc/0x308 [adv7511]
adv7511_irq_process+0xd8/0x120 [adv7511]
adv7511_irq_handler+0x1c/0x30 [adv7511]
irq_thread_fn+0x30/0xa0
irq_thread+0x14c/0x238
kthread+0x190/0x1a8
Published Apr 17, 2024 · Updated May 11, 2026
Unknown · CVSS Not scored
In the Linux kernel, the following vulnerability has been resolved:
drm/mediatek: Fix a null pointer crash in mtk_drm_crtc_finish_page_flip
It's possible that mtk_crtc->event is NULL in
mtk_drm_crtc_finish_page_flip().
pending_needs_vblank value is set by mtk_crtc->event, but in
mtk_drm_crtc_atomic_flush(), it's is not guarded by the same
lock in mtk_drm_finish_page_flip(), thus a race condition happens.
Consider the following case:
CPU1 CPU2
step 1:
mtk_drm_crtc_atomic_begin()
mtk_crtc->event is not null,
step 1:
mtk_drm_crtc_atomic_flush:
mtk_drm_crtc_update_config(
!!mtk_crtc->event)
step 2:
mtk_crtc_ddp_irq ->
mtk_drm_finish_page_flip:
lock
mtk_crtc->event set to null,
pending_needs_vblank set to false
unlock
pending_needs_vblank set to true,
step 2:
mtk_crtc_ddp_irq ->
mtk_drm_finish_page_flip called again,
pending_needs_vblank is still true
//null pointer
Instead of guarding the entire mtk_drm_crtc_atomic_flush(), it's more
efficient to just check if mtk_crtc->event is null before use.
Published Apr 17, 2024 · Updated May 11, 2026
Unknown · CVSS Not scored
In the Linux kernel, the following vulnerability has been resolved:
scsi: hisi_sas: Fix a deadlock issue related to automatic dump
If we issue a disabling PHY command, the device attached with it will go
offline, if a 2 bit ECC error occurs at the same time, a hung task may be
found:
[ 4613.652388] INFO: task kworker/u256:0:165233 blocked for more than 120 seconds.
[ 4613.666297] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 4613.674809] task:kworker/u256:0 state:D stack: 0 pid:165233 ppid: 2 flags:0x00000208
[ 4613.683959] Workqueue: 0000:74:02.0_disco_q sas_revalidate_domain [libsas]
[ 4613.691518] Call trace:
[ 4613.694678] __switch_to+0xf8/0x17c
[ 4613.698872] __schedule+0x660/0xee0
[ 4613.703063] schedule+0xac/0x240
[ 4613.706994] schedule_timeout+0x500/0x610
[ 4613.711705] __down+0x128/0x36c
[ 4613.715548] down+0x240/0x2d0
[ 4613.719221] hisi_sas_internal_abort_timeout+0x1bc/0x260 [hisi_sas_main]
[ 4613.726618] sas_execute_internal_abort+0x144/0x310 [libsas]
[ 4613.732976] sas_execute_internal_abort_dev+0x44/0x60 [libsas]
[ 4613.739504] hisi_sas_internal_task_abort_dev.isra.0+0xbc/0x1b0 [hisi_sas_main]
[ 4613.747499] hisi_sas_dev_gone+0x174/0x250 [hisi_sas_main]
[ 4613.753682] sas_notify_lldd_dev_gone+0xec/0x2e0 [libsas]
[ 4613.759781] sas_unregister_common_dev+0x4c/0x7a0 [libsas]
[ 4613.765962] sas_destruct_devices+0xb8/0x120 [libsas]
[ 4613.771709] sas_do_revalidate_domain.constprop.0+0x1b8/0x31c [libsas]
[ 4613.778930] sas_revalidate_domain+0x60/0xa4 [libsas]
[ 4613.784716] process_one_work+0x248/0x950
[ 4613.789424] worker_thread+0x318/0x934
[ 4613.793878] kthread+0x190/0x200
[ 4613.797810] ret_from_fork+0x10/0x18
[ 4613.802121] INFO: task kworker/u256:4:316722 blocked for more than 120 seconds.
[ 4613.816026] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 4613.824538] task:kworker/u256:4 state:D stack: 0 pid:316722 ppid: 2 flags:0x00000208
[ 4613.833670] Workqueue: 0000:74:02.0 hisi_sas_rst_work_handler [hisi_sas_main]
[ 4613.841491] Call trace:
[ 4613.844647] __switch_to+0xf8/0x17c
[ 4613.848852] __schedule+0x660/0xee0
[ 4613.853052] schedule+0xac/0x240
[ 4613.856984] schedule_timeout+0x500/0x610
[ 4613.861695] __down+0x128/0x36c
[ 4613.865542] down+0x240/0x2d0
[ 4613.869216] hisi_sas_controller_prereset+0x58/0x1fc [hisi_sas_main]
[ 4613.876324] hisi_sas_rst_work_handler+0x40/0x8c [hisi_sas_main]
[ 4613.883019] process_one_work+0x248/0x950
[ 4613.887732] worker_thread+0x318/0x934
[ 4613.892204] kthread+0x190/0x200
[ 4613.896118] ret_from_fork+0x10/0x18
[ 4613.900423] INFO: task kworker/u256:1:348985 blocked for more than 121 seconds.
[ 4613.914341] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 4613.922852] task:kworker/u256:1 state:D stack: 0 pid:348985 ppid: 2 flags:0x00000208
[ 4613.931984] Workqueue: 0000:74:02.0_event_q sas_port_event_worker [libsas]
[ 4613.939549] Call trace:
[ 4613.942702] __switch_to+0xf8/0x17c
[ 4613.946892] __schedule+0x660/0xee0
[ 4613.951083] schedule+0xac/0x240
[ 4613.955015] schedule_timeout+0x500/0x610
[ 4613.959725] wait_for_common+0x200/0x610
[ 4613.964349] wait_for_completion+0x3c/0x5c
[ 4613.969146] flush_workqueue+0x198/0x790
[ 4613.973776] sas_porte_broadcast_rcvd+0x1e8/0x320 [libsas]
[ 4613.979960] sas_port_event_worker+0x54/0xa0 [libsas]
[ 4613.985708] process_one_work+0x248/0x950
[ 4613.990420] worker_thread+0x318/0x934
[ 4613.994868] kthread+0x190/0x200
[ 4613.998800] ret_from_fork+0x10/0x18
This is because when the device goes offline, we obtain the hisi_hba
semaphore and send the ABORT_DEV command to the device. However, the
internal abort timed out due to the 2 bit ECC error and triggers automatic
dump. In addition, since the hisi_hba semaphore has been obtained, the dump
cannot be executed and the controller cannot be reset.
Therefore, the deadlocks occur on the following circular dependencies
---truncated---
Published Apr 17, 2024 · Updated May 11, 2026
Unknown · CVSS Not scored
In the Linux kernel, the following vulnerability has been resolved:
f2fs: fix NULL pointer dereference in f2fs_submit_page_write()
BUG: kernel NULL pointer dereference, address: 0000000000000014
RIP: 0010:f2fs_submit_page_write+0x6cf/0x780 [f2fs]
Call Trace:
<TASK>
? show_regs+0x6e/0x80
? __die+0x29/0x70
? page_fault_oops+0x154/0x4a0
? prb_read_valid+0x20/0x30
? __irq_work_queue_local+0x39/0xd0
? irq_work_queue+0x36/0x70
? do_user_addr_fault+0x314/0x6c0
? exc_page_fault+0x7d/0x190
? asm_exc_page_fault+0x2b/0x30
? f2fs_submit_page_write+0x6cf/0x780 [f2fs]
? f2fs_submit_page_write+0x736/0x780 [f2fs]
do_write_page+0x50/0x170 [f2fs]
f2fs_outplace_write_data+0x61/0xb0 [f2fs]
f2fs_do_write_data_page+0x3f8/0x660 [f2fs]
f2fs_write_single_data_page+0x5bb/0x7a0 [f2fs]
f2fs_write_cache_pages+0x3da/0xbe0 [f2fs]
...
It is possible that other threads have added this fio to io->bio
and submitted the io->bio before entering f2fs_submit_page_write().
At this point io->bio = NULL.
If is_end_zone_blkaddr(sbi, fio->new_blkaddr) of this fio is true,
then an NULL pointer dereference error occurs at bio_get(io->bio).
The original code for determining zone end was after "out:",
which would have missed some fio who is zone end. I've moved
this code before "skip:" to make sure it's done for each fio.
Published Apr 17, 2024 · Updated May 11, 2026
Unknown · CVSS Not scored
In the Linux kernel, the following vulnerability has been resolved:
comedi: comedi_8255: Correct error in subdevice initialization
The refactoring done in commit 5c57b1ccecc7 ("comedi: comedi_8255: Rework
subdevice initialization functions") to the initialization of the io
field of struct subdev_8255_private broke all cards using the
drivers/comedi/drivers/comedi_8255.c module.
Prior to 5c57b1ccecc7, __subdev_8255_init() initialized the io field
in the newly allocated struct subdev_8255_private to the non-NULL
callback given to the function, otherwise it used a flag parameter to
select between subdev_8255_mmio and subdev_8255_io. The refactoring
removed that logic and the flag, as subdev_8255_mm_init() and
subdev_8255_io_init() now explicitly pass subdev_8255_mmio and
subdev_8255_io respectively to __subdev_8255_init(), only
__subdev_8255_init() never sets spriv->io to the supplied
callback. That spriv->io is NULL leads to a later BUG:
BUG: kernel NULL pointer dereference, address: 0000000000000000
PGD 0 P4D 0
Oops: 0010 [#1] SMP PTI
CPU: 1 PID: 1210 Comm: systemd-udevd Not tainted 6.7.3-x86_64 #1
Hardware name: XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
RIP: 0010:0x0
Code: Unable to access opcode bytes at 0xffffffffffffffd6.
RSP: 0018:ffffa3f1c02d7b78 EFLAGS: 00010202
RAX: 0000000000000000 RBX: ffff91f847aefd00 RCX: 000000000000009b
RDX: 0000000000000003 RSI: 0000000000000001 RDI: ffff91f840f6fc00
RBP: ffff91f840f6fc00 R08: 0000000000000000 R09: 0000000000000001
R10: 0000000000000000 R11: 000000000000005f R12: 0000000000000000
R13: 0000000000000000 R14: ffffffffc0102498 R15: ffff91f847ce6ba8
FS: 00007f72f4e8f500(0000) GS:ffff91f8d5c80000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: ffffffffffffffd6 CR3: 000000010540e000 CR4: 00000000000406f0
Call Trace:
<TASK>
? __die_body+0x15/0x57
? page_fault_oops+0x2ef/0x33c
? insert_vmap_area.constprop.0+0xb6/0xd5
? alloc_vmap_area+0x529/0x5ee
? exc_page_fault+0x15a/0x489
? asm_exc_page_fault+0x22/0x30
__subdev_8255_init+0x79/0x8d [comedi_8255]
pci_8255_auto_attach+0x11a/0x139 [8255_pci]
comedi_auto_config+0xac/0x117 [comedi]
? __pfx___driver_attach+0x10/0x10
pci_device_probe+0x88/0xf9
really_probe+0x101/0x248
__driver_probe_device+0xbb/0xed
driver_probe_device+0x1a/0x72
__driver_attach+0xd4/0xed
bus_for_each_dev+0x76/0xb8
bus_add_driver+0xbe/0x1be
driver_register+0x9a/0xd8
comedi_pci_driver_register+0x28/0x48 [comedi_pci]
? __pfx_pci_8255_driver_init+0x10/0x10 [8255_pci]
do_one_initcall+0x72/0x183
do_init_module+0x5b/0x1e8
init_module_from_file+0x86/0xac
__do_sys_finit_module+0x151/0x218
do_syscall_64+0x72/0xdb
entry_SYSCALL_64_after_hwframe+0x6e/0x76
RIP: 0033:0x7f72f50a0cb9
Code: ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 47 71 0c 00 f7 d8 64 89 01 48
RSP: 002b:00007ffd47e512d8 EFLAGS: 00000246 ORIG_RAX: 0000000000000139
RAX: ffffffffffffffda RBX: 0000562dd06ae070 RCX: 00007f72f50a0cb9
RDX: 0000000000000000 RSI: 00007f72f52d32df RDI: 000000000000000e
RBP: 0000000000000000 R08: 00007f72f5168b20 R09: 0000000000000000
R10: 0000000000000050 R11: 0000000000000246 R12: 00007f72f52d32df
R13: 0000000000020000 R14: 0000562dd06785c0 R15: 0000562dcfd0e9a8
</TASK>
Modules linked in: 8255_pci(+) comedi_8255 comedi_pci comedi intel_gtt e100(+) acpi_cpufreq rtc_cmos usbhid
CR2: 0000000000000000
---[ end trace 0000000000000000 ]---
RIP: 0010:0x0
Code: Unable to access opcode bytes at 0xffffffffffffffd6.
RSP: 0018:ffffa3f1c02d7b78 EFLAGS: 00010202
RAX: 0000000000000000 RBX: ffff91f847aefd00 RCX: 000000000000009b
RDX: 0000000000000003 RSI: 0000000000000001 RDI: ffff91f840f6fc00
RBP: ffff91f840f6fc00 R08: 0000000000000000 R09: 0000000000000001
R10: 0000000000000000 R11: 000000000000005f R12: 0000000000000000
R13: 0000000000000000 R14: ffffffffc0102498 R15: ffff91f847ce6ba8
FS:
---truncated---
Published Apr 17, 2024 · Updated May 11, 2026
Unknown · CVSS Not scored
In the Linux kernel, the following vulnerability has been resolved:
spi: lpspi: Avoid potential use-after-free in probe()
fsl_lpspi_probe() is allocating/disposing memory manually with
spi_alloc_host()/spi_alloc_target(), but uses
devm_spi_register_controller(). In case of error after the latter call the
memory will be explicitly freed in the probe function by
spi_controller_put() call, but used afterwards by "devm" management outside
probe() (spi_unregister_controller() <- devm_spi_unregister() below).
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000070
...
Call trace:
kernfs_find_ns
kernfs_find_and_get_ns
sysfs_remove_group
sysfs_remove_groups
device_remove_attrs
device_del
spi_unregister_controller
devm_spi_unregister
release_nodes
devres_release_all
really_probe
driver_probe_device
__device_attach_driver
bus_for_each_drv
__device_attach
device_initial_probe
bus_probe_device
deferred_probe_work_func
process_one_work
worker_thread
kthread
ret_from_fork
Published Apr 17, 2024 · Updated May 11, 2026
Unknown · CVSS Not scored
In the Linux kernel, the following vulnerability has been resolved:
packet: annotate data-races around ignore_outgoing
ignore_outgoing is read locklessly from dev_queue_xmit_nit()
and packet_getsockopt()
Add appropriate READ_ONCE()/WRITE_ONCE() annotations.
syzbot reported:
BUG: KCSAN: data-race in dev_queue_xmit_nit / packet_setsockopt
write to 0xffff888107804542 of 1 bytes by task 22618 on cpu 0:
packet_setsockopt+0xd83/0xfd0 net/packet/af_packet.c:4003
do_sock_setsockopt net/socket.c:2311 [inline]
__sys_setsockopt+0x1d8/0x250 net/socket.c:2334
__do_sys_setsockopt net/socket.c:2343 [inline]
__se_sys_setsockopt net/socket.c:2340 [inline]
__x64_sys_setsockopt+0x66/0x80 net/socket.c:2340
do_syscall_64+0xd3/0x1d0
entry_SYSCALL_64_after_hwframe+0x6d/0x75
read to 0xffff888107804542 of 1 bytes by task 27 on cpu 1:
dev_queue_xmit_nit+0x82/0x620 net/core/dev.c:2248
xmit_one net/core/dev.c:3527 [inline]
dev_hard_start_xmit+0xcc/0x3f0 net/core/dev.c:3547
__dev_queue_xmit+0xf24/0x1dd0 net/core/dev.c:4335
dev_queue_xmit include/linux/netdevice.h:3091 [inline]
batadv_send_skb_packet+0x264/0x300 net/batman-adv/send.c:108
batadv_send_broadcast_skb+0x24/0x30 net/batman-adv/send.c:127
batadv_iv_ogm_send_to_if net/batman-adv/bat_iv_ogm.c:392 [inline]
batadv_iv_ogm_emit net/batman-adv/bat_iv_ogm.c:420 [inline]
batadv_iv_send_outstanding_bat_ogm_packet+0x3f0/0x4b0 net/batman-adv/bat_iv_ogm.c:1700
process_one_work kernel/workqueue.c:3254 [inline]
process_scheduled_works+0x465/0x990 kernel/workqueue.c:3335
worker_thread+0x526/0x730 kernel/workqueue.c:3416
kthread+0x1d1/0x210 kernel/kthread.c:388
ret_from_fork+0x4b/0x60 arch/x86/kernel/process.c:147
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:243
value changed: 0x00 -> 0x01
Reported by Kernel Concurrency Sanitizer on:
CPU: 1 PID: 27 Comm: kworker/u8:1 Tainted: G W 6.8.0-syzkaller-08073-g480e035fc4c7 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 02/29/2024
Workqueue: bat_events batadv_iv_send_outstanding_bat_ogm_packet
Published Apr 17, 2024 · Updated May 11, 2026
High · CVSS 7.5
In the Linux kernel, the following vulnerability has been resolved:
ice: fix uninitialized dplls mutex usage
The pf->dplls.lock mutex is initialized too late, after its first use.
Move it to the top of ice_dpll_init.
Note that the "err_exit" error path destroys the mutex. And the mutex is
the last thing destroyed in ice_dpll_deinit.
This fixes the following warning with CONFIG_DEBUG_MUTEXES:
ice 0000:10:00.0: The DDP package was successfully loaded: ICE OS Default Package version 1.3.36.0
ice 0000:10:00.0: 252.048 Gb/s available PCIe bandwidth (16.0 GT/s PCIe x16 link)
ice 0000:10:00.0: PTP init successful
------------[ cut here ]------------
DEBUG_LOCKS_WARN_ON(lock->magic != lock)
WARNING: CPU: 0 PID: 410 at kernel/locking/mutex.c:587 __mutex_lock+0x773/0xd40
Modules linked in: crct10dif_pclmul crc32_pclmul crc32c_intel polyval_clmulni polyval_generic ice(+) nvme nvme_c>
CPU: 0 PID: 410 Comm: kworker/0:4 Not tainted 6.8.0-rc5+ #3
Hardware name: HPE ProLiant DL110 Gen10 Plus/ProLiant DL110 Gen10 Plus, BIOS U56 10/19/2023
Workqueue: events work_for_cpu_fn
RIP: 0010:__mutex_lock+0x773/0xd40
Code: c0 0f 84 1d f9 ff ff 44 8b 35 0d 9c 69 01 45 85 f6 0f 85 0d f9 ff ff 48 c7 c6 12 a2 a9 85 48 c7 c7 12 f1 a>
RSP: 0018:ff7eb1a3417a7ae0 EFLAGS: 00010286
RAX: 0000000000000000 RBX: 0000000000000002 RCX: 0000000000000000
RDX: 0000000000000002 RSI: ffffffff85ac2bff RDI: 00000000ffffffff
RBP: ff7eb1a3417a7b80 R08: 0000000000000000 R09: 00000000ffffbfff
R10: ff7eb1a3417a7978 R11: ff32b80f7fd2e568 R12: 0000000000000000
R13: 0000000000000000 R14: 0000000000000000 R15: ff32b7f02c50e0d8
FS: 0000000000000000(0000) GS:ff32b80efe800000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000055b5852cc000 CR3: 000000003c43a004 CR4: 0000000000771ef0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
PKRU: 55555554
Call Trace:
<TASK>
? __warn+0x84/0x170
? __mutex_lock+0x773/0xd40
? report_bug+0x1c7/0x1d0
? prb_read_valid+0x1b/0x30
? handle_bug+0x42/0x70
? exc_invalid_op+0x18/0x70
? asm_exc_invalid_op+0x1a/0x20
? __mutex_lock+0x773/0xd40
? rcu_is_watching+0x11/0x50
? __kmalloc_node_track_caller+0x346/0x490
? ice_dpll_lock_status_get+0x28/0x50 [ice]
? __pfx_ice_dpll_lock_status_get+0x10/0x10 [ice]
? ice_dpll_lock_status_get+0x28/0x50 [ice]
ice_dpll_lock_status_get+0x28/0x50 [ice]
dpll_device_get_one+0x14f/0x2e0
dpll_device_event_send+0x7d/0x150
dpll_device_register+0x124/0x180
ice_dpll_init_dpll+0x7b/0xd0 [ice]
ice_dpll_init+0x224/0xa40 [ice]
? _dev_info+0x70/0x90
ice_load+0x468/0x690 [ice]
ice_probe+0x75b/0xa10 [ice]
? _raw_spin_unlock_irqrestore+0x4f/0x80
? process_one_work+0x1a3/0x500
local_pci_probe+0x47/0xa0
work_for_cpu_fn+0x17/0x30
process_one_work+0x20d/0x500
worker_thread+0x1df/0x3e0
? __pfx_worker_thread+0x10/0x10
kthread+0x103/0x140
? __pfx_kthread+0x10/0x10
ret_from_fork+0x31/0x50
? __pfx_kthread+0x10/0x10
ret_from_fork_asm+0x1b/0x30
</TASK>
irq event stamp: 125197
hardirqs last enabled at (125197): [<ffffffff8416409d>] finish_task_switch.isra.0+0x12d/0x3d0
hardirqs last disabled at (125196): [<ffffffff85134044>] __schedule+0xea4/0x19f0
softirqs last enabled at (105334): [<ffffffff84e1e65a>] napi_get_frags_check+0x1a/0x60
softirqs last disabled at (105332): [<ffffffff84e1e65a>] napi_get_frags_check+0x1a/0x60
---[ end trace 0000000000000000 ]---
Published Apr 17, 2024 · Updated May 11, 2026
Unknown · CVSS Not scored
In the Linux kernel, the following vulnerability has been resolved:
mm/debug_vm_pgtable: fix BUG_ON with pud advanced test
Architectures like powerpc add debug checks to ensure we find only devmap
PUD pte entries. These debug checks are only done with CONFIG_DEBUG_VM.
This patch marks the ptes used for PUD advanced test devmap pte entries so
that we don't hit on debug checks on architecture like ppc64 as below.
WARNING: CPU: 2 PID: 1 at arch/powerpc/mm/book3s64/radix_pgtable.c:1382 radix__pud_hugepage_update+0x38/0x138
....
NIP [c0000000000a7004] radix__pud_hugepage_update+0x38/0x138
LR [c0000000000a77a8] radix__pudp_huge_get_and_clear+0x28/0x60
Call Trace:
[c000000004a2f950] [c000000004a2f9a0] 0xc000000004a2f9a0 (unreliable)
[c000000004a2f980] [000d34c100000000] 0xd34c100000000
[c000000004a2f9a0] [c00000000206ba98] pud_advanced_tests+0x118/0x334
[c000000004a2fa40] [c00000000206db34] debug_vm_pgtable+0xcbc/0x1c48
[c000000004a2fc10] [c00000000000fd28] do_one_initcall+0x60/0x388
Also
kernel BUG at arch/powerpc/mm/book3s64/pgtable.c:202!
....
NIP [c000000000096510] pudp_huge_get_and_clear_full+0x98/0x174
LR [c00000000206bb34] pud_advanced_tests+0x1b4/0x334
Call Trace:
[c000000004a2f950] [000d34c100000000] 0xd34c100000000 (unreliable)
[c000000004a2f9a0] [c00000000206bb34] pud_advanced_tests+0x1b4/0x334
[c000000004a2fa40] [c00000000206db34] debug_vm_pgtable+0xcbc/0x1c48
[c000000004a2fc10] [c00000000000fd28] do_one_initcall+0x60/0x388
Published Apr 17, 2024 · Updated May 11, 2026
Unknown · CVSS Not scored
In the Linux kernel, the following vulnerability has been resolved:
netlink: add nla be16/32 types to minlen array
BUG: KMSAN: uninit-value in nla_validate_range_unsigned lib/nlattr.c:222 [inline]
BUG: KMSAN: uninit-value in nla_validate_int_range lib/nlattr.c:336 [inline]
BUG: KMSAN: uninit-value in validate_nla lib/nlattr.c:575 [inline]
BUG: KMSAN: uninit-value in __nla_validate_parse+0x2e20/0x45c0 lib/nlattr.c:631
nla_validate_range_unsigned lib/nlattr.c:222 [inline]
nla_validate_int_range lib/nlattr.c:336 [inline]
validate_nla lib/nlattr.c:575 [inline]
...
The message in question matches this policy:
[NFTA_TARGET_REV] = NLA_POLICY_MAX(NLA_BE32, 255),
but because NLA_BE32 size in minlen array is 0, the validation
code will read past the malformed (too small) attribute.
Note: Other attributes, e.g. BITFIELD32, SINT, UINT.. are also missing:
those likely should be added too.
Published Apr 17, 2024 · Updated May 11, 2026
Medium · CVSS 5.1
In the Linux kernel, the following vulnerability has been resolved:
powerpc/rtas: use correct function name for resetting TCE tables
The PAPR spec spells the function name as
"ibm,reset-pe-dma-windows"
but in practice firmware uses the singular form:
"ibm,reset-pe-dma-window"
in the device tree. Since we have the wrong spelling in the RTAS
function table, reverse lookups (token -> name) fail and warn:
unexpected failed lookup for token 86
WARNING: CPU: 1 PID: 545 at arch/powerpc/kernel/rtas.c:659 __do_enter_rtas_trace+0x2a4/0x2b4
CPU: 1 PID: 545 Comm: systemd-udevd Not tainted 6.8.0-rc4 #30
Hardware name: IBM,9105-22A POWER10 (raw) 0x800200 0xf000006 of:IBM,FW1060.00 (NL1060_028) hv:phyp pSeries
NIP [c0000000000417f0] __do_enter_rtas_trace+0x2a4/0x2b4
LR [c0000000000417ec] __do_enter_rtas_trace+0x2a0/0x2b4
Call Trace:
__do_enter_rtas_trace+0x2a0/0x2b4 (unreliable)
rtas_call+0x1f8/0x3e0
enable_ddw.constprop.0+0x4d0/0xc84
dma_iommu_dma_supported+0xe8/0x24c
dma_set_mask+0x5c/0xd8
mlx5_pci_init.constprop.0+0xf0/0x46c [mlx5_core]
probe_one+0xfc/0x32c [mlx5_core]
local_pci_probe+0x68/0x12c
pci_call_probe+0x68/0x1ec
pci_device_probe+0xbc/0x1a8
really_probe+0x104/0x570
__driver_probe_device+0xb8/0x224
driver_probe_device+0x54/0x130
__driver_attach+0x158/0x2b0
bus_for_each_dev+0xa8/0x120
driver_attach+0x34/0x48
bus_add_driver+0x174/0x304
driver_register+0x8c/0x1c4
__pci_register_driver+0x68/0x7c
mlx5_init+0xb8/0x118 [mlx5_core]
do_one_initcall+0x60/0x388
do_init_module+0x7c/0x2a4
init_module_from_file+0xb4/0x108
idempotent_init_module+0x184/0x34c
sys_finit_module+0x90/0x114
And oopses are possible when lockdep is enabled or the RTAS
tracepoints are active, since those paths dereference the result of
the lookup.
Use the correct spelling to match firmware's behavior, adjusting the
related constants to match.
Published Apr 17, 2024 · Updated May 11, 2026
Medium · CVSS 4.4
In the Linux kernel, the following vulnerability has been resolved:
nvme-fc: do not wait in vain when unloading module
The module exit path has race between deleting all controllers and
freeing 'left over IDs'. To prevent double free a synchronization
between nvme_delete_ctrl and ida_destroy has been added by the initial
commit.
There is some logic around trying to prevent from hanging forever in
wait_for_completion, though it does not handling all cases. E.g.
blktests is able to reproduce the situation where the module unload
hangs forever.
If we completely rely on the cleanup code executed from the
nvme_delete_ctrl path, all IDs will be freed eventually. This makes
calling ida_destroy unnecessary. We only have to ensure that all
nvme_delete_ctrl code has been executed before we leave
nvme_fc_exit_module. This is done by flushing the nvme_delete_wq
workqueue.
While at it, remove the unused nvme_fc_wq workqueue too.
Published Apr 17, 2024 · Updated May 11, 2026
Unknown · CVSS Not scored
In the Linux kernel, the following vulnerability has been resolved:
block: Fix WARNING in _copy_from_iter
Syzkaller reports a warning in _copy_from_iter because an
iov_iter is supposedly used in the wrong direction. The reason
is that syzcaller managed to generate a request with
a transfer direction of SG_DXFER_TO_FROM_DEV. This instructs
the kernel to copy user buffers into the kernel, read into
the copied buffers and then copy the data back to user space.
Thus the iovec is used in both directions.
Detect this situation in the block layer and construct a new
iterator with the correct direction for the copy-in.
Published Apr 17, 2024 · Updated May 11, 2026
Medium · CVSS 6
In the Linux kernel, the following vulnerability has been resolved:
efi: runtime: Fix potential overflow of soft-reserved region size
md_size will have been narrowed if we have >= 4GB worth of pages in a
soft-reserved region.
Published Apr 17, 2024 · Updated May 11, 2026
Unknown · CVSS Not scored
In the Linux kernel, the following vulnerability has been resolved:
scsi: ufs: core: Fix shift issue in ufshcd_clear_cmd()
When task_tag >= 32 (in MCQ mode) and sizeof(unsigned int) == 4, 1U <<
task_tag will out of bounds for a u32 mask. Fix this up to prevent
SHIFT_ISSUE (bitwise shifts that are out of bounds for their data type).
[name:debug_monitors&]Unexpected kernel BRK exception at EL1
[name:traps&]Internal error: BRK handler: 00000000f2005514 [#1] PREEMPT SMP
[name:mediatek_cpufreq_hw&]cpufreq stop DVFS log done
[name:mrdump&]Kernel Offset: 0x1ba5800000 from 0xffffffc008000000
[name:mrdump&]PHYS_OFFSET: 0x80000000
[name:mrdump&]pstate: 22400005 (nzCv daif +PAN -UAO)
[name:mrdump&]pc : [0xffffffdbaf52bb2c] ufshcd_clear_cmd+0x280/0x288
[name:mrdump&]lr : [0xffffffdbaf52a774] ufshcd_wait_for_dev_cmd+0x3e4/0x82c
[name:mrdump&]sp : ffffffc0081471b0
<snip>
Workqueue: ufs_eh_wq_0 ufshcd_err_handler
Call trace:
dump_backtrace+0xf8/0x144
show_stack+0x18/0x24
dump_stack_lvl+0x78/0x9c
dump_stack+0x18/0x44
mrdump_common_die+0x254/0x480 [mrdump]
ipanic_die+0x20/0x30 [mrdump]
notify_die+0x15c/0x204
die+0x10c/0x5f8
arm64_notify_die+0x74/0x13c
do_debug_exception+0x164/0x26c
el1_dbg+0x64/0x80
el1h_64_sync_handler+0x3c/0x90
el1h_64_sync+0x68/0x6c
ufshcd_clear_cmd+0x280/0x288
ufshcd_wait_for_dev_cmd+0x3e4/0x82c
ufshcd_exec_dev_cmd+0x5bc/0x9ac
ufshcd_verify_dev_init+0x84/0x1c8
ufshcd_probe_hba+0x724/0x1ce0
ufshcd_host_reset_and_restore+0x260/0x574
ufshcd_reset_and_restore+0x138/0xbd0
ufshcd_err_handler+0x1218/0x2f28
process_one_work+0x5fc/0x1140
worker_thread+0x7d8/0xe20
kthread+0x25c/0x468
ret_from_fork+0x10/0x20
Published Apr 17, 2024 · Updated May 11, 2026
Unknown · CVSS Not scored
In the Linux kernel, the following vulnerability has been resolved:
LoongArch: Update cpu_sibling_map when disabling nonboot CPUs
Update cpu_sibling_map when disabling nonboot CPUs by defining & calling
clear_cpu_sibling_map(), otherwise we get such errors on SMT systems:
jump label: negative count!
WARNING: CPU: 6 PID: 45 at kernel/jump_label.c:263 __static_key_slow_dec_cpuslocked+0xec/0x100
CPU: 6 PID: 45 Comm: cpuhp/6 Not tainted 6.8.0-rc5+ #1340
pc 90000000004c302c ra 90000000004c302c tp 90000001005bc000 sp 90000001005bfd20
a0 000000000000001b a1 900000000224c278 a2 90000001005bfb58 a3 900000000224c280
a4 900000000224c278 a5 90000001005bfb50 a6 0000000000000001 a7 0000000000000001
t0 ce87a4763eb5234a t1 ce87a4763eb5234a t2 0000000000000000 t3 0000000000000000
t4 0000000000000006 t5 0000000000000000 t6 0000000000000064 t7 0000000000001964
t8 000000000009ebf6 u0 9000000001f2a068 s9 0000000000000000 s0 900000000246a2d8
s1 ffffffffffffffff s2 ffffffffffffffff s3 90000000021518c0 s4 0000000000000040
s5 9000000002151058 s6 9000000009828e40 s7 00000000000000b4 s8 0000000000000006
ra: 90000000004c302c __static_key_slow_dec_cpuslocked+0xec/0x100
ERA: 90000000004c302c __static_key_slow_dec_cpuslocked+0xec/0x100
CRMD: 000000b0 (PLV0 -IE -DA +PG DACF=CC DACM=CC -WE)
PRMD: 00000004 (PPLV0 +PIE -PWE)
EUEN: 00000000 (-FPE -SXE -ASXE -BTE)
ECFG: 00071c1c (LIE=2-4,10-12 VS=7)
ESTAT: 000c0000 [BRK] (IS= ECode=12 EsubCode=0)
PRID: 0014d000 (Loongson-64bit, Loongson-3A6000-HV)
CPU: 6 PID: 45 Comm: cpuhp/6 Not tainted 6.8.0-rc5+ #1340
Stack : 0000000000000000 900000000203f258 900000000179afc8 90000001005bc000
90000001005bf980 0000000000000000 90000001005bf988 9000000001fe0be0
900000000224c280 900000000224c278 90000001005bf8c0 0000000000000001
0000000000000001 ce87a4763eb5234a 0000000007f38000 90000001003f8cc0
0000000000000000 0000000000000006 0000000000000000 4c206e6f73676e6f
6f4c203a656d616e 000000000009ec99 0000000007f38000 0000000000000000
900000000214b000 9000000001fe0be0 0000000000000004 0000000000000000
0000000000000107 0000000000000009 ffffffffffafdabe 00000000000000b4
0000000000000006 90000000004c302c 9000000000224528 00005555939a0c7c
00000000000000b0 0000000000000004 0000000000000000 0000000000071c1c
...
Call Trace:
[<9000000000224528>] show_stack+0x48/0x1a0
[<900000000179afc8>] dump_stack_lvl+0x78/0xa0
[<9000000000263ed0>] __warn+0x90/0x1a0
[<90000000017419b8>] report_bug+0x1b8/0x280
[<900000000179c564>] do_bp+0x264/0x420
[<90000000004c302c>] __static_key_slow_dec_cpuslocked+0xec/0x100
[<90000000002b4d7c>] sched_cpu_deactivate+0x2fc/0x300
[<9000000000266498>] cpuhp_invoke_callback+0x178/0x8a0
[<9000000000267f70>] cpuhp_thread_fun+0xf0/0x240
[<90000000002a117c>] smpboot_thread_fn+0x1dc/0x2e0
[<900000000029a720>] kthread+0x140/0x160
[<9000000000222288>] ret_from_kernel_thread+0xc/0xa4
Published Apr 17, 2024 · Updated May 11, 2026
Unknown · CVSS Not scored
In the Linux kernel, the following vulnerability has been resolved:
cachefiles: fix memory leak in cachefiles_add_cache()
The following memory leak was reported after unbinding /dev/cachefiles:
==================================================================
unreferenced object 0xffff9b674176e3c0 (size 192):
comm "cachefilesd2", pid 680, jiffies 4294881224
hex dump (first 32 bytes):
01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace (crc ea38a44b):
[<ffffffff8eb8a1a5>] kmem_cache_alloc+0x2d5/0x370
[<ffffffff8e917f86>] prepare_creds+0x26/0x2e0
[<ffffffffc002eeef>] cachefiles_determine_cache_security+0x1f/0x120
[<ffffffffc00243ec>] cachefiles_add_cache+0x13c/0x3a0
[<ffffffffc0025216>] cachefiles_daemon_write+0x146/0x1c0
[<ffffffff8ebc4a3b>] vfs_write+0xcb/0x520
[<ffffffff8ebc5069>] ksys_write+0x69/0xf0
[<ffffffff8f6d4662>] do_syscall_64+0x72/0x140
[<ffffffff8f8000aa>] entry_SYSCALL_64_after_hwframe+0x6e/0x76
==================================================================
Put the reference count of cache_cred in cachefiles_daemon_unbind() to
fix the problem. And also put cache_cred in cachefiles_add_cache() error
branch to avoid memory leaks.
Published Apr 17, 2024 · Updated May 11, 2026
Unknown · CVSS Not scored
In the Linux kernel, the following vulnerability has been resolved:
IB/hfi1: Fix a memleak in init_credit_return
When dma_alloc_coherent fails to allocate dd->cr_base[i].va,
init_credit_return should deallocate dd->cr_base and
dd->cr_base[i] that allocated before. Or those resources
would be never freed and a memleak is triggered.
Published Apr 17, 2024 · Updated May 11, 2026
Unknown · CVSS Not scored
In the Linux kernel, the following vulnerability has been resolved:
net: bridge: switchdev: Skip MDB replays of deferred events on offload
Before this change, generation of the list of MDB events to replay
would race against the creation of new group memberships, either from
the IGMP/MLD snooping logic or from user configuration.
While new memberships are immediately visible to walkers of
br->mdb_list, the notification of their existence to switchdev event
subscribers is deferred until a later point in time. So if a replay
list was generated during a time that overlapped with such a window,
it would also contain a replay of the not-yet-delivered event.
The driver would thus receive two copies of what the bridge internally
considered to be one single event. On destruction of the bridge, only
a single membership deletion event was therefore sent. As a
consequence of this, drivers which reference count memberships (at
least DSA), would be left with orphan groups in their hardware
database when the bridge was destroyed.
This is only an issue when replaying additions. While deletion events
may still be pending on the deferred queue, they will already have
been removed from br->mdb_list, so no duplicates can be generated in
that scenario.
To a user this meant that old group memberships, from a bridge in
which a port was previously attached, could be reanimated (in
hardware) when the port joined a new bridge, without the new bridge's
knowledge.
For example, on an mv88e6xxx system, create a snooping bridge and
immediately add a port to it:
root@infix-06-0b-00:~$ ip link add dev br0 up type bridge mcast_snooping 1 && \
> ip link set dev x3 up master br0
And then destroy the bridge:
root@infix-06-0b-00:~$ ip link del dev br0
root@infix-06-0b-00:~$ mvls atu
ADDRESS FID STATE Q F 0 1 2 3 4 5 6 7 8 9 a
DEV:0 Marvell 88E6393X
33:33:00:00:00:6a 1 static - - 0 . . . . . . . . . .
33:33:ff:87:e4:3f 1 static - - 0 . . . . . . . . . .
ff:ff:ff:ff:ff:ff 1 static - - 0 1 2 3 4 5 6 7 8 9 a
root@infix-06-0b-00:~$
The two IPv6 groups remain in the hardware database because the
port (x3) is notified of the host's membership twice: once via the
original event and once via a replay. Since only a single delete
notification is sent, the count remains at 1 when the bridge is
destroyed.
Then add the same port (or another port belonging to the same hardware
domain) to a new bridge, this time with snooping disabled:
root@infix-06-0b-00:~$ ip link add dev br1 up type bridge mcast_snooping 0 && \
> ip link set dev x3 up master br1
All multicast, including the two IPv6 groups from br0, should now be
flooded, according to the policy of br1. But instead the old
memberships are still active in the hardware database, causing the
switch to only forward traffic to those groups towards the CPU (port
0).
Eliminate the race in two steps:
1. Grab the write-side lock of the MDB while generating the replay
list.
This prevents new memberships from showing up while we are generating
the replay list. But it leaves the scenario in which a deferred event
was already generated, but not delivered, before we grabbed the
lock. Therefore:
2. Make sure that no deferred version of a replay event is already
enqueued to the switchdev deferred queue, before adding it to the
replay list, when replaying additions.
Published Apr 17, 2024 · Updated May 11, 2026
Unknown · CVSS Not scored
In the Linux kernel, the following vulnerability has been resolved:
platform/x86: think-lmi: Fix password opcode ordering for workstations
The Lenovo workstations require the password opcode to be run before
the attribute value is changed (if Admin password is enabled).
Tested on some Thinkpads to confirm they are OK with this order too.
Published Apr 17, 2024 · Updated May 11, 2026
Unknown · CVSS Not scored
In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Fix memory leak in dm_sw_fini()
After destroying dmub_srv, the memory associated with it is
not freed, causing a memory leak:
unreferenced object 0xffff896302b45800 (size 1024):
comm "(udev-worker)", pid 222, jiffies 4294894636
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace (crc 6265fd77):
[<ffffffff993495ed>] kmalloc_trace+0x29d/0x340
[<ffffffffc0ea4a94>] dm_dmub_sw_init+0xb4/0x450 [amdgpu]
[<ffffffffc0ea4e55>] dm_sw_init+0x15/0x2b0 [amdgpu]
[<ffffffffc0ba8557>] amdgpu_device_init+0x1417/0x24e0 [amdgpu]
[<ffffffffc0bab285>] amdgpu_driver_load_kms+0x15/0x190 [amdgpu]
[<ffffffffc0ba09c7>] amdgpu_pci_probe+0x187/0x4e0 [amdgpu]
[<ffffffff9968fd1e>] local_pci_probe+0x3e/0x90
[<ffffffff996918a3>] pci_device_probe+0xc3/0x230
[<ffffffff99805872>] really_probe+0xe2/0x480
[<ffffffff99805c98>] __driver_probe_device+0x78/0x160
[<ffffffff99805daf>] driver_probe_device+0x1f/0x90
[<ffffffff9980601e>] __driver_attach+0xce/0x1c0
[<ffffffff99803170>] bus_for_each_dev+0x70/0xc0
[<ffffffff99804822>] bus_add_driver+0x112/0x210
[<ffffffff99807245>] driver_register+0x55/0x100
[<ffffffff990012d1>] do_one_initcall+0x41/0x300
Fix this by freeing dmub_srv after destroying it.
Published Apr 17, 2024 · Updated May 11, 2026
Unknown · CVSS Not scored
In the Linux kernel, the following vulnerability has been resolved:
nfc: nci: free rx_data_reassembly skb on NCI device cleanup
rx_data_reassembly skb is stored during NCI data exchange for processing
fragmented packets. It is dropped only when the last fragment is processed
or when an NTF packet with NCI_OP_RF_DEACTIVATE_NTF opcode is received.
However, the NCI device may be deallocated before that which leads to skb
leak.
As by design the rx_data_reassembly skb is bound to the NCI device and
nothing prevents the device to be freed before the skb is processed in
some way and cleaned, free it on the NCI device cleanup.
Found by Linux Verification Center (linuxtesting.org) with Syzkaller.
Published Apr 17, 2024 · Updated May 11, 2026
Unknown · CVSS Not scored
In the Linux kernel, the following vulnerability has been resolved:
tools/rtla: Fix clang warning about mount_point var size
clang is reporting this warning:
$ make HOSTCC=clang CC=clang LLVM_IAS=1
[...]
clang -O -g -DVERSION=\"6.8.0-rc3\" -flto=auto -fexceptions
-fstack-protector-strong -fasynchronous-unwind-tables
-fstack-clash-protection -Wall -Werror=format-security
-Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS
$(pkg-config --cflags libtracefs) -c -o src/utils.o src/utils.c
src/utils.c:548:66: warning: 'fscanf' may overflow; destination buffer in argument 3 has size 1024, but the corresponding specifier may require size 1025 [-Wfortify-source]
548 | while (fscanf(fp, "%*s %" STR(MAX_PATH) "s %99s %*s %*d %*d\n", mount_point, type) == 2) {
| ^
Increase mount_point variable size to MAX_PATH+1 to avoid the overflow.
Published Apr 17, 2024 · Updated May 11, 2026
Unknown · CVSS Not scored
In the Linux kernel, the following vulnerability has been resolved:
amdkfd: use calloc instead of kzalloc to avoid integer overflow
This uses calloc instead of doing the multiplication which might
overflow.
Published Apr 13, 2024 · Updated May 11, 2026
Unknown · CVSS Not scored
In the Linux kernel, the following vulnerability has been resolved:
vfio/fsl-mc: Block calling interrupt handler without trigger
The eventfd_ctx trigger pointer of the vfio_fsl_mc_irq object is
initially NULL and may become NULL if the user sets the trigger
eventfd to -1. The interrupt handler itself is guaranteed that
trigger is always valid between request_irq() and free_irq(), but
the loopback testing mechanisms to invoke the handler function
need to test the trigger. The triggering and setting ioctl paths
both make use of igate and are therefore mutually exclusive.
The vfio-fsl-mc driver does not make use of irqfds, nor does it
support any sort of masking operations, therefore unlike vfio-pci
and vfio-platform, the flow can remain essentially unchanged.
Published Apr 5, 2024 · Updated May 11, 2026
Unknown · CVSS Not scored
In the Linux kernel, the following vulnerability has been resolved:
vfio/platform: Create persistent IRQ handlers
The vfio-platform SET_IRQS ioctl currently allows loopback triggering of
an interrupt before a signaling eventfd has been configured by the user,
which thereby allows a NULL pointer dereference.
Rather than register the IRQ relative to a valid trigger, register all
IRQs in a disabled state in the device open path. This allows mask
operations on the IRQ to nest within the overall enable state governed
by a valid eventfd signal. This decouples @masked, protected by the
@locked spinlock from @trigger, protected via the @igate mutex.
In doing so, it's guaranteed that changes to @trigger cannot race the
IRQ handlers because the IRQ handler is synchronously disabled before
modifying the trigger, and loopback triggering of the IRQ via ioctl is
safe due to serialization with trigger changes via igate.
For compatibility, request_irq() failures are maintained to be local to
the SET_IRQS ioctl rather than a fatal error in the open device path.
This allows, for example, a userspace driver with polling mode support
to continue to work regardless of moving the request_irq() call site.
This necessarily blocks all SET_IRQS access to the failed index.
Published Apr 5, 2024 · Updated May 11, 2026
Unknown · CVSS Not scored
In the Linux kernel, the following vulnerability has been resolved:
spi: cadence-qspi: remove system-wide suspend helper calls from runtime PM hooks
The ->runtime_suspend() and ->runtime_resume() callbacks are not
expected to call spi_controller_suspend() and spi_controller_resume().
Remove calls to those in the cadence-qspi driver.
Those helpers have two roles currently:
- They stop/start the queue, including dealing with the kworker.
- They toggle the SPI controller SPI_CONTROLLER_SUSPENDED flag. It
requires acquiring ctlr->bus_lock_mutex.
Step one is irrelevant because cadence-qspi is not queued. Step two
however has two implications:
- A deadlock occurs, because ->runtime_resume() is called in a context
where the lock is already taken (in the ->exec_op() callback, where
the usage count is incremented).
- It would disallow all operations once the device is auto-suspended.
Here is a brief call tree highlighting the mutex deadlock:
spi_mem_exec_op()
...
spi_mem_access_start()
mutex_lock(&ctlr->bus_lock_mutex)
cqspi_exec_mem_op()
pm_runtime_resume_and_get()
cqspi_resume()
spi_controller_resume()
mutex_lock(&ctlr->bus_lock_mutex)
...
spi_mem_access_end()
mutex_unlock(&ctlr->bus_lock_mutex)
...
Published Apr 4, 2024 · Updated May 11, 2026
Unknown · CVSS Not scored
In the Linux kernel, the following vulnerability has been resolved:
net: veth: clear GRO when clearing XDP even when down
veth sets NETIF_F_GRO automatically when XDP is enabled,
because both features use the same NAPI machinery.
The logic to clear NETIF_F_GRO sits in veth_disable_xdp() which
is called both on ndo_stop and when XDP is turned off.
To avoid the flag from being cleared when the device is brought
down, the clearing is skipped when IFF_UP is not set.
Bringing the device down should indeed not modify its features.
Unfortunately, this means that clearing is also skipped when
XDP is disabled _while_ the device is down. And there's nothing
on the open path to bring the device features back into sync.
IOW if user enables XDP, disables it and then brings the device
up we'll end up with a stray GRO flag set but no NAPI instances.
We don't depend on the GRO flag on the datapath, so the datapath
won't crash. We will crash (or hang), however, next time features
are sync'ed (either by user via ethtool or peer changing its config).
The GRO flag will go away, and veth will try to disable the NAPIs.
But the open path never created them since XDP was off, the GRO flag
was a stray. If NAPI was initialized before we'll hang in napi_disable().
If it never was we'll crash trying to stop uninitialized hrtimer.
Move the GRO flag updates to the XDP enable / disable paths,
instead of mixing them with the ndo_open / ndo_close paths.
Published Apr 4, 2024 · Updated May 11, 2026
Unknown · CVSS Not scored
In the Linux kernel, the following vulnerability has been resolved:
drivers: perf: ctr_get_width function for legacy is not defined
With parameters CONFIG_RISCV_PMU_LEGACY=y and CONFIG_RISCV_PMU_SBI=n
linux kernel crashes when you try perf record:
$ perf record ls
[ 46.749286] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000
[ 46.750199] Oops [#1]
[ 46.750342] Modules linked in:
[ 46.750608] CPU: 0 PID: 107 Comm: perf-exec Not tainted 6.6.0 #2
[ 46.750906] Hardware name: riscv-virtio,qemu (DT)
[ 46.751184] epc : 0x0
[ 46.751430] ra : arch_perf_update_userpage+0x54/0x13e
[ 46.751680] epc : 0000000000000000 ra : ffffffff8072ee52 sp : ff2000000022b8f0
[ 46.751958] gp : ffffffff81505988 tp : ff6000000290d400 t0 : ff2000000022b9c0
[ 46.752229] t1 : 0000000000000001 t2 : 0000000000000003 s0 : ff2000000022b930
[ 46.752451] s1 : ff600000028fb000 a0 : 0000000000000000 a1 : ff600000028fb000
[ 46.752673] a2 : 0000000ae2751268 a3 : 00000000004fb708 a4 : 0000000000000004
[ 46.752895] a5 : 0000000000000000 a6 : 000000000017ffe3 a7 : 00000000000000d2
[ 46.753117] s2 : ff600000028fb000 s3 : 0000000ae2751268 s4 : 0000000000000000
[ 46.753338] s5 : ffffffff8153e290 s6 : ff600000863b9000 s7 : ff60000002961078
[ 46.753562] s8 : ff60000002961048 s9 : ff60000002961058 s10: 0000000000000001
[ 46.753783] s11: 0000000000000018 t3 : ffffffffffffffff t4 : ffffffffffffffff
[ 46.754005] t5 : ff6000000292270c t6 : ff2000000022bb30
[ 46.754179] status: 0000000200000100 badaddr: 0000000000000000 cause: 000000000000000c
[ 46.754653] Code: Unable to access instruction at 0xffffffffffffffec.
[ 46.754939] ---[ end trace 0000000000000000 ]---
[ 46.755131] note: perf-exec[107] exited with irqs disabled
[ 46.755546] note: perf-exec[107] exited with preempt_count 4
This happens because in the legacy case the ctr_get_width function was not
defined, but it is used in arch_perf_update_userpage.
Also remove extra check in riscv_pmu_ctr_get_width_mask
Published Apr 4, 2024 · Updated May 11, 2026
Unknown · CVSS Not scored
In the Linux kernel, the following vulnerability has been resolved:
btrfs: dev-replace: properly validate device names
There's a syzbot report that device name buffers passed to device
replace are not properly checked for string termination which could lead
to a read out of bounds in getname_kernel().
Add a helper that validates both source and target device name buffers.
For devid as the source initialize the buffer to empty string in case
something tries to read it later.
This was originally analyzed and fixed in a different way by Edward Adam
Davis (see links).
Published Apr 4, 2024 · Updated May 11, 2026
Unknown · CVSS Not scored
In the Linux kernel, the following vulnerability has been resolved:
dmaengine: fsl-qdma: fix SoC may hang on 16 byte unaligned read
There is chip (ls1028a) errata:
The SoC may hang on 16 byte unaligned read transactions by QDMA.
Unaligned read transactions initiated by QDMA may stall in the NOC
(Network On-Chip), causing a deadlock condition. Stalled transactions will
trigger completion timeouts in PCIe controller.
Workaround:
Enable prefetch by setting the source descriptor prefetchable bit
( SD[PF] = 1 ).
Implement this workaround.
Published Apr 4, 2024 · Updated May 11, 2026
Unknown · CVSS Not scored
In the Linux kernel, the following vulnerability has been resolved:
dmaengine: fsl-qdma: init irq after reg initialization
Initialize the qDMA irqs after the registers are configured so that
interrupts that may have been pending from a primary kernel don't get
processed by the irq handler before it is ready to and cause panic with
the following trace:
Call trace:
fsl_qdma_queue_handler+0xf8/0x3e8
__handle_irq_event_percpu+0x78/0x2b0
handle_irq_event_percpu+0x1c/0x68
handle_irq_event+0x44/0x78
handle_fasteoi_irq+0xc8/0x178
generic_handle_irq+0x24/0x38
__handle_domain_irq+0x90/0x100
gic_handle_irq+0x5c/0xb8
el1_irq+0xb8/0x180
_raw_spin_unlock_irqrestore+0x14/0x40
__setup_irq+0x4bc/0x798
request_threaded_irq+0xd8/0x190
devm_request_threaded_irq+0x74/0xe8
fsl_qdma_probe+0x4d4/0xca8
platform_drv_probe+0x50/0xa0
really_probe+0xe0/0x3f8
driver_probe_device+0x64/0x130
device_driver_attach+0x6c/0x78
__driver_attach+0xbc/0x158
bus_for_each_dev+0x5c/0x98
driver_attach+0x20/0x28
bus_add_driver+0x158/0x220
driver_register+0x60/0x110
__platform_driver_register+0x44/0x50
fsl_qdma_driver_init+0x18/0x20
do_one_initcall+0x48/0x258
kernel_init_freeable+0x1a4/0x23c
kernel_init+0x10/0xf8
ret_from_fork+0x10/0x18
Published Apr 4, 2024 · Updated May 11, 2026
Medium · CVSS 5.5
In the Linux kernel, the following vulnerability has been resolved:
iommufd: Fix protection fault in iommufd_test_syz_conv_iova
Syzkaller reported the following bug:
general protection fault, probably for non-canonical address 0xdffffc0000000038: 0000 [#1] SMP KASAN
KASAN: null-ptr-deref in range [0x00000000000001c0-0x00000000000001c7]
Call Trace:
lock_acquire
lock_acquire+0x1ce/0x4f0
down_read+0x93/0x4a0
iommufd_test_syz_conv_iova+0x56/0x1f0
iommufd_test_access_rw.isra.0+0x2ec/0x390
iommufd_test+0x1058/0x1e30
iommufd_fops_ioctl+0x381/0x510
vfs_ioctl
__do_sys_ioctl
__se_sys_ioctl
__x64_sys_ioctl+0x170/0x1e0
do_syscall_x64
do_syscall_64+0x71/0x140
This is because the new iommufd_access_change_ioas() sets access->ioas to
NULL during its process, so the lock might be gone in a concurrent racing
context.
Fix this by doing the same access->ioas sanity as iommufd_access_rw() and
iommufd_access_pin_pages() functions do.
Published Apr 4, 2024 · Updated May 11, 2026
Unknown · CVSS Not scored
In the Linux kernel, the following vulnerability has been resolved:
pmdomain: arm: Fix NULL dereference on scmi_perf_domain removal
On unloading of the scmi_perf_domain module got the below splat, when in
the DT provided to the system under test the '#power-domain-cells' property
was missing. Indeed, this particular setup causes the probe to bail out
early without giving any error, which leads to the ->remove() callback gets
to run too, but without all the expected initialized structures in place.
Add a check and bail out early on remove too.
Call trace:
scmi_perf_domain_remove+0x28/0x70 [scmi_perf_domain]
scmi_dev_remove+0x28/0x40 [scmi_core]
device_remove+0x54/0x90
device_release_driver_internal+0x1dc/0x240
driver_detach+0x58/0xa8
bus_remove_driver+0x78/0x108
driver_unregister+0x38/0x70
scmi_driver_unregister+0x28/0x180 [scmi_core]
scmi_perf_domain_driver_exit+0x18/0xb78 [scmi_perf_domain]
__arm64_sys_delete_module+0x1a8/0x2c0
invoke_syscall+0x50/0x128
el0_svc_common.constprop.0+0x48/0xf0
do_el0_svc+0x24/0x38
el0_svc+0x34/0xb8
el0t_64_sync_handler+0x100/0x130
el0t_64_sync+0x190/0x198
Code: a90153f3 f9403c14 f9414800 955f8a05 (b9400a80)
---[ end trace 0000000000000000 ]---
Published Apr 4, 2024 · Updated May 11, 2026
