Browse CVE records published in October 2021, with severity, affected products, CWE, KEV, and source-backed vulnerability context.
Showing 50 of 1675 matching CVEs · Page 9 of 34.
In the CODESYS V2 web server prior to V1.1.9.22 crafted web server requests may cause a Null pointer dereference in the CODESYS web server and may result in a denial-of-service condition.
Published Oct 26, 2021 · Updated Sep 17, 2024
Advantech WebAccess versions 9.02 and prior are vulnerable to a heap-based buffer overflow, which may allow an attacker to remotely execute code.
Published Oct 18, 2021 · Updated Sep 17, 2024
Juniper Networks Junos OS uses the 128.0.0.0/2 subnet for internal communications between the RE and PFEs. It was discovered that packets utilizing these IP addresses may egress an QFX5000 Series switch, leaking configuration information such as heartbeats, kernel versions, etc. out to the Internet, leading to an information exposure vulnerability. This issue affects Juniper Networks Junos OS on QFX5110, QFX5120, QFX5200, QFX5210 Series, and QFX5100 with QFX 5e Series image installed: All versions prior to 17.3R3-S12; 18.1 versions prior to 18.1R3-S13; 18.3 versions prior to 18.3R3-S5; 19.1 versions prior to 19.1R3-S6; 19.2 versions prior to 19.2R1-S7, 19.2R3-S3; 19.3 versions prior to 19.3R2-S6, 19.3R3-S3; 19.4 versions prior to 19.4R1-S4, 19.4R3-S5; 20.1 versions prior to 20.1R2-S2, 20.1R3-S1; 20.2 versions prior to 20.2R3-S2; 20.3 versions prior to 20.3R3-S1; 20.4 versions prior to 20.4R2-S1, 20.4R3; 21.1 versions prior to 21.1R1-S1, 21.1R2;
Published Oct 19, 2021 · Updated Sep 17, 2024
InHand Networks IR615 Router's Versions 2.3.0.r4724 and 2.3.0.r4870 are vulnerable to an attacker using a traceroute tool to inject commands into the device. This may allow the attacker to remotely run commands on behalf of the device.
Published Oct 19, 2021 · Updated Sep 17, 2024
An Improper Check for Unusual or Exceptional Conditions vulnerability combined with Improper Handling of Exceptional Conditions in Juniper Networks Junos OS on QFX Series and PTX Series allows an unauthenticated network based attacker to cause increased FPC CPU utilization by sending specific IP packets which are being VXLAN encapsulated leading to a partial Denial of Service (DoS). Continued receipted of these specific traffic will create a sustained Denial of Service (DoS) condition. This issue affects: Juniper Networks Junos OS on QFX Series: All versions prior to 17.3R3-S11; 17.4 versions prior to 17.4R2-S13, 17.4R3-S4; 18.1 versions prior to 18.1R3-S12; 18.2 versions prior to 18.2R2-S8, 18.2R3-S7; 18.3 versions prior to 18.3R3-S4; 18.4 versions prior to 18.4R1-S8, 18.4R2-S7, 18.4R3-S7; 19.1 versions prior to 19.1R1-S6, 19.1R2-S2, 19.1R3-S4; 19.2 versions prior to 19.2R1-S6, 19.2R3-S2; 19.3 versions prior to 19.3R3-S1; 19.4 versions prior to 19.4R2-S3, 19.4R3-S1; 20.1 versions prior to 20.1R2, 20.1R3; 20.2 versions prior to 20.2R2, 20.2R3; 20.3 versions prior to 20.3R1-S1, 20.3R2. Juniper Networks Junos OS on PTX Series: All versions prior to 18.4R3-S9; 19.1 versions prior to 19.1R3-S6; 19.2 versions prior to 19.2R1-S7, 19.2R3-S3; 19.3 versions prior to 19.3R2-S6, 19.3R3-S3; 19.4 versions prior to 19.4R1-S4, 19.4R3-S5; 20.1 versions prior to 20.1R2-S2, 20.1R3; 20.2 versions prior to 20.2R3-S1; 20.3 versions prior to 20.3R2-S1, 20.3R3; 20.4 versions prior to 20.4R2-S1, 20.4R3; 21.1 versions prior to 21.1R1-S1, 21.1R2.
Published Oct 19, 2021 · Updated Sep 17, 2024
The XMLA Connections component of TIBCO Software Inc.'s TIBCO JasperReports Server, TIBCO JasperReports Server, TIBCO JasperReports Server, TIBCO JasperReports Server, TIBCO JasperReports Server - Community Edition, TIBCO JasperReports Server - Developer Edition, TIBCO JasperReports Server for AWS Marketplace, TIBCO JasperReports Server for ActiveMatrix BPM, and TIBCO JasperReports Server for Microsoft Azure contains a difficult to exploit vulnerability that allows a low privileged attacker with network access to interfere with XML processing in the affected component. Affected releases are TIBCO Software Inc.'s TIBCO JasperReports Server: versions 7.2.1 and below, TIBCO JasperReports Server: versions 7.5.0 and 7.5.1, TIBCO JasperReports Server: version 7.8.0, TIBCO JasperReports Server: version 7.9.0, TIBCO JasperReports Server - Community Edition: versions 7.8.0 and below, TIBCO JasperReports Server - Developer Edition: versions 7.9.0 and below, TIBCO JasperReports Server for AWS Marketplace: versions 7.9.0 and below, TIBCO JasperReports Server for ActiveMatrix BPM: versions 7.9.0 and below, and TIBCO JasperReports Server for Microsoft Azure: version 7.8.0.
Published Oct 12, 2021 · Updated Sep 17, 2024
A crafted request with invalid offsets may cause an out-of-bounds read or write access in CODESYS V2 Runtime Toolkit 32 Bit full and PLCWinNT prior to versions V2.4.7.56, resulting in a denial-of-service condition or local memory overwrite.
Published Oct 26, 2021 · Updated Sep 17, 2024
IBM Sterling File Gateway 2.2.0.0 through 6.1.1.0 could allow an authenticated attacker to enumerate usernames due to there being an observable discrepancy in returned messages. IBM X-Force ID: 195568.
Published Oct 7, 2021 · Updated Sep 17, 2024
The affected product does not properly control the allocation of resources. A user may be able to allocate unlimited memory buffers using API functions.
Published Oct 22, 2021 · Updated Sep 17, 2024
The file extension of the TadTools file upload function fails to filter, thus remote attackers can upload any types of files and execute arbitrary code without logging in.
Published Oct 8, 2021 · Updated Sep 17, 2024
InHand Networks IR615 Router's Versions 2.3.0.r4724 and 2.3.0.r4870 have inadequate encryption strength, which may allow an attacker to intercept the communication and steal sensitive information or hijack the session.
Published Oct 19, 2021 · Updated Sep 17, 2024
A skilled attacker with physical access to the affected device can gain access to the hard disk drive of the device to change the telemetry region and could use this setting to interrogate or program an implantable device in any region in the world.
Published Oct 4, 2021 · Updated Sep 17, 2024
The Windows version of Multipass before 1.7.0 allowed any local process to connect to the localhost TCP control socket to perform mounts from the operating system to a guest, allowing for privilege escalation.
Published Oct 1, 2021 · Updated Sep 17, 2024
IBM PowerVM Hypervisor FW1010 could allow a privileged user to gain access to another VM due to assigning duplicate WWPNs. IBM X-Force ID: 210162.
Published Oct 6, 2021 · Updated Sep 17, 2024
Execution with Unnecessary Privileges vulnerability in Bitdefender Endpoint Security Tools, Total Security allows a local attacker to elevate to 'NT AUTHORITY\System. Impersonation enables the server thread to perform actions on behalf of the client but within the limits of the client's security context. This issue affects: Bitdefender Endpoint Security Tools versions prior to 7.2.1.65. Bitdefender Total Security versions prior to 25.0.26.
Published Oct 28, 2021 · Updated Sep 17, 2024
InHand Networks IR615 Router's Versions 2.3.0.r4724 and 2.3.0.r4870 are vulnerable to cross-site request forgery when unauthorized commands are submitted from a user the web application trusts. This may allow an attacker to remotely perform actions on the router’s management portal, such as making configuration changes, changing administrator credentials, and running system commands on the router.
Published Oct 19, 2021 · Updated Sep 17, 2024
InHand Networks IR615 Router's Versions 2.3.0.r4724 and 2.3.0.r4870 do not perform sufficient input validation on client requests from the help page. This may allow an attacker to perform a reflected cross-site scripting attack, which could allow an attacker to run code on behalf of the client browser.
Published Oct 19, 2021 · Updated Sep 17, 2024
In PHP versions 7.3.x up to and including 7.3.31, 7.4.x below 7.4.25 and 8.0.x below 8.0.12, when running PHP FPM SAPI with main FPM daemon process running as root and child worker processes running as lower-privileged users, it is possible for the child processes to access memory shared with the main process and write to it, modifying it in a way that would cause the root process to conduct invalid memory reads and writes, which can be used to escalate privileges from local unprivileged user to the root user.
Published Oct 25, 2021 · Updated Sep 17, 2024
An unauthenticated remote user could exploit a potential integer overflow condition in the exacqVision Server with a specially crafted script and cause denial-of-service condition.
Published Oct 11, 2021 · Updated Sep 17, 2024
IBM Security Risk Manager on CP4S 1.7.0.0 stores user credentials in plain clear text which can be read by a an authenticatedl privileged user. IBM X-Force ID: 209940.
Published Oct 19, 2021 · Updated Sep 17, 2024
IBM Planning Analytics 2.0 could allow a remote attacker to obtain sensitive information, caused by the failure to set the HTTPOnly flag. A remote attacker could exploit this vulnerability to obtain sensitive information from the cookie. IBM X-Force ID: 198755.
Published Oct 27, 2021 · Updated Sep 17, 2024
The Juniper Networks CTPView server is not enforcing HTTP Strict Transport Security (HSTS). HSTS is an optional response header which allows servers to indicate that content from the requested domain will only be served over HTTPS. The lack of HSTS may leave the system vulnerable to downgrade attacks, SSL-stripping man-in-the-middle attacks, and weakens cookie-hijacking protections. This issue affects Juniper Networks CTPView: 7.3 versions prior to 7.3R7; 9.1 versions prior to 9.1R3.
Published Oct 19, 2021 · Updated Sep 17, 2024
InHand Networks IR615 Router's Versions 2.3.0.r4724 and 2.3.0.r4870 website used to control the router is vulnerable to stored cross-site scripting, which may allow an attacker to hijack sessions of users connected to the system.
Published Oct 19, 2021 · Updated Sep 17, 2024
Dell EMC InsightIQ, versions prior to 4.1.4, contain risky cryptographic algorithms in the SSH component. A remote unauthenticated attacker could potentially exploit this vulnerability leading to authentication bypass and remote takeover of the InsightIQ. This allows an attacker to take complete control of InsightIQ to affect services provided by SSH; so Dell recommends customers to upgrade at the earliest opportunity.
Published Oct 1, 2021 · Updated Sep 17, 2024
Integria IMS in its 5.0.92 version is vulnerable to a Remote Code Execution attack through file uploading. An unauthenticated attacker could abuse the AsyncUpload() function in order to exploit the vulnerability.
Published Oct 7, 2021 · Updated Sep 17, 2024
IBM Sterling B2B Integrator Standard Edition 5.2.0.0 through 6.1.1.0 is vulnerable to cross-site request forgery which could allow an attacker to execute malicious and unauthorized actions transmitted from a user that the website trusts. IBM X-Force ID: 204913.
Published Oct 6, 2021 · Updated Sep 17, 2024
A specific function code receives a raw pointer supplied by the user and deallocates this pointer. The user can then control what memory regions will be freed and cause use-after-free condition.
Published Oct 22, 2021 · Updated Sep 17, 2024
Some API functions permit by-design writing or copying data into a given buffer. Since the client controls these parameters, an attacker could rewrite the memory in any location of the affected product.
Published Oct 22, 2021 · Updated Sep 17, 2024
A command injection vulnerability in tcpdump command processing on Juniper Networks Junos OS Evolved allows an attacker with authenticated CLI access to be able to bypass configured access protections to execute arbitrary shell commands within the context of the current user. The vulnerability allows an attacker to bypass command authorization restrictions assigned to their specific user account and execute commands that are available to the privilege level for which the user is assigned. For example, a user that is in the super-user login class, but restricted to executing specific CLI commands could exploit the vulnerability to execute any other command available to an unrestricted admin user. This vulnerability does not increase the privilege level of the user, but rather bypasses any CLI command restrictions by allowing full access to the shell. This issue affects Juniper Networks Junos OS Evolved: All versions prior to 20.3R2-S1-EVO; 20.4 versions prior to 20.4R2-S2-EVO; 21.1 versions prior to 21.1R2-EVO; 21.2 versions prior to 21.2R1-S1-EVO, 21.2R2-EVO.
Published Oct 19, 2021 · Updated Sep 17, 2024
A vulnerability in the processing of TCP MD5 authentication in Juniper Networks Junos OS Evolved may allow a BGP or LDP session configured with MD5 authentication to succeed, even if the peer does not have TCP MD5 authentication enabled. This could lead to untrusted or unauthorized sessions being established, resulting in an impact on confidentiality or stability of the network. This issue affects Juniper Networks Junos OS Evolved: All versions prior to 20.3R2-S1-EVO; 20.4 versions prior to 20.4R2-EVO; 21.1 versions prior to 21.1R2-EVO. Juniper Networks Junos OS is not affected by this issue.
Published Oct 19, 2021 · Updated Sep 17, 2024
IBM Jazz Team Server products could allow an authenticated user to obtain elevated privileges under certain configurations. IBM X-Force ID: 203025.
Published Oct 27, 2021 · Updated Sep 17, 2024
A Race Condition in the 'show chassis pic' command in Juniper Networks Junos OS Evolved may allow an attacker to crash the port interface concentrator daemon (picd) process on the FPC, if the command is executed coincident with other system events outside the attacker's control, leading to a Denial of Service (DoS) condition. Continued execution of the CLI command, under precise conditions, could create a sustained Denial of Service (DoS) condition. This issue affects all Juniper Networks Junos OS Evolved versions prior to 20.1R2-EVO on PTX10003 and PTX10008 platforms. Junos OS is not affected by this vulnerability.
Published Oct 19, 2021 · Updated Sep 17, 2024
An Improper Input Validation vulnerability in routing process daemon (RPD) of Juniper Networks Junos OS devices configured with BGP origin validation using Resource Public Key Infrastructure (RPKI), allows an attacker to send a specific BGP update which may cause RPKI policy-checks to be bypassed. This, in turn, may allow a spoofed advertisement to be accepted or propagated. This issue affects: Juniper Networks Junos OS 12.3 versions prior to 12.3R12-S18; 15.1 versions prior to 15.1R7-S9; 17.2 versions prior to 17.2R3-S3; 17.3 versions prior to 17.3R3-S7; 17.4 versions prior to 17.4R2-S9, 17.4R3; 18.1 versions prior to 18.1R3-S13; 18.2 versions prior to 18.2R3-S3; 18.3 versions prior to 18.3R3-S1; 18.4 versions prior to 18.4R3; 19.1 versions prior to 19.1R2; 19.2 versions prior to 19.2R2; 19.3 versions prior to 19.3R2.
Published Oct 19, 2021 · Updated Sep 17, 2024
IBM Sterling B2B Integrator Standard Edition 5.2.0.0 through 6.1.1.0 could allow an authenticated user to download unauthorized files through the dashboard user interface. IBM X-Force ID: 202213.
Published Oct 6, 2021 · Updated Sep 17, 2024
The “Study Edit” function of ShinHer StudyOnline System does not perform permission control. After logging in with user’s privilege, remote attackers can access and edit other users’ tutorial schedule by crafting URL parameters.
Published Oct 15, 2021 · Updated Sep 17, 2024
An Improper Check for Unusual or Exceptional Conditions vulnerability combined with a Race Condition in the flow daemon (flowd) of Juniper Networks Junos OS on SRX300 Series, SRX500 Series, SRX1500, and SRX5000 Series with SPC2 allows an unauthenticated network based attacker sending specific traffic to cause a crash of the flowd/srxpfe process, responsible for traffic forwarding in SRX, which will cause a Denial of Service (DoS). Continued receipt and processing of this specific traffic will create a sustained Denial of Service (DoS) condition. This issue can only occur when specific packets are trying to create the same session and logging for session-close is configured as a policy action. Affected platforms are: SRX300 Series, SRX500 Series, SRX1500, and SRX5000 Series with SPC2. Not affected platforms are: SRX4000 Series, SRX5000 Series with SPC3, and vSRX Series. This issue affects Juniper Networks Junos OS SRX300 Series, SRX500 Series, SRX1500, and SRX5000 Series with SPC2: All versions prior to 17.4R3-S5; 18.3 versions prior to 18.3R3-S5; 18.4 versions prior to 18.4R3-S9; 19.1 versions prior to 19.1R3-S6; 19.2 versions prior to 19.2R1-S7, 19.2R3-S2; 19.3 versions prior to 19.3R2-S6, 19.3R3-S2; 19.4 versions prior to 19.4R1-S4, 19.4R3-S3; 20.1 versions prior to 20.1R2-S2, 20.1R3; 20.2 versions prior to 20.2R3; 20.3 versions prior to 20.3R2-S1, 20.3R3; 20.4 versions prior to 20.4R2.
Published Oct 19, 2021 · Updated Sep 17, 2024
The “List View” function of ShinHer StudyOnline System is not under authority control. After logging in with user’s privilege, remote attackers can access the content of other users’ message boards by crafting URL parameters.
Published Oct 15, 2021 · Updated Sep 17, 2024
This affects the package vm2 before 3.9.4 via a Prototype Pollution attack vector, which can lead to execution of arbitrary code on the host machine.
Published Oct 18, 2021 · Updated Sep 17, 2024
An information disclosure via path traversal was discovered in apport/hookutils.py function read_file(). This issue affects: apport 2.14.1 versions prior to 2.14.1-0ubuntu3.29+esm8; 2.20.1 versions prior to 2.20.1-0ubuntu2.30+esm2; 2.20.9 versions prior to 2.20.9-0ubuntu7.26; 2.20.11 versions prior to 2.20.11-0ubuntu27.20; 2.20.11 versions prior to 2.20.11-0ubuntu65.3;
Published Oct 1, 2021 · Updated Sep 17, 2024
In mymbCONNECT24, mbCONNECT24 <= 2.9.0 an unauthenticated user can enumerate valid backend users by checking what kind of response the server sends for crafted invalid login attempts.
Published Oct 27, 2021 · Updated Sep 17, 2024
The affected product’s proprietary protocol CSC allows for calling numerous function codes. In order to call those function codes, the user must supply parameters. There is no sanitation on the value of the offset, which allows the client to specify any offset and read out-of-bounds data.
Published Oct 22, 2021 · Updated Sep 17, 2024
IBM Business Automation Workflow 18.0, 19.0, 20.0, and 21.0 is vulnerable to cross-site scripting. This vulnerability allows users to embed arbitrary JavaScript code in the Web UI thus altering the intended functionality potentially leading to credentials disclosure within a trusted session. IBM X-Force ID: 206581.
Published Oct 18, 2021 · Updated Sep 17, 2024
A stack-based buffer overflow vulnerability exists in the Palo Alto Networks GlobalProtect app that enables a man-in-the-middle attacker to disrupt system processes and potentially execute arbitrary code with SYSTEM privileges. This issue impacts: GlobalProtect app 5.1 versions earlier than GlobalProtect app 5.1.9 on Windows; GlobalProtect app 5.2 versions earlier than GlobalProtect app 5.2.8 on Windows; GlobalProtect app 5.2 versions earlier than GlobalProtect app 5.2.8 on the Universal Windows Platform; GlobalProtect app 5.3 versions earlier than GlobalProtect app 5.3.1 on Linux.
Published Oct 13, 2021 · Updated Sep 17, 2024
Acrobat Reader DC versions 2021.005.20060 (and earlier), 2020.004.30006 (and earlier) and 2017.011.30199 (and earlier) are affected by a use-after-free vulnerability when processing AcroForm field that could result in arbitrary code execution in the context of the current user. User interaction is required to exploit this vulnerability in that the target must visit a malicious page or open a malicious file.
Published Oct 7, 2021 · Updated Sep 17, 2024
IBM Sterling B2B Integrator Standard Edition 6.0.0.0 through 6.1.1.0 is vulnerable to SQL injection. A remote attacker could send specially crafted SQL statements, which could allow the attacker to view, add, modify or delete information in the back-end database. IBM X-Force ID: 203734.
Published Oct 6, 2021 · Updated Sep 17, 2024
An improper privilege management vulnerability in the Juniper Networks Junos OS and Junos OS Evolved command-line interpreter (CLI) allows a low-privileged user to overwrite local files as root, possibly leading to a system integrity issue or Denial of Service (DoS). Depending on the files overwritten, exploitation of this vulnerability could lead to a sustained Denial of Service (DoS) condition, requiring manual user intervention to recover. Systems are only vulnerable if jdhcpd is running, which can be confirmed via the 'show system processes' command. For example: root@host# run show system processes extensive | match dhcp 26537 root -16 0 97568K 13692K RUN 0 0:01 3.71% jdhcpd This issue affects: Juniper Networks Junos OS: All versions, including the following supported releases: 15.1 versions prior to 15.1R7-S10; 17.4 versions prior to 17.4R3-S5; 18.3 versions prior to 18.3R3-S5; 18.4 versions prior to 18.4R3-S9; 19.1 versions prior to 19.1R3-S6; 19.2 versions prior to 19.2R1-S7, 19.2R3-S3; 19.3 versions prior to 19.3R2-S6, 19.3R3-S3; 19.4 versions prior to 19.4R3-S6; 20.1 versions prior to 20.1R2-S2, 20.1R3-S1; 20.2 versions prior to 20.2R3-S2; 20.3 versions prior to 20.3R3; 20.4 versions prior to 20.4R2-S1, 20.4R3; 21.1 versions prior to 21.1R1-S1, 21.1R2. Juniper Networks Junos OS Evolved: All versions prior to 20.4R2-S3-EVO; All versions of 21.1-EVO.
Published Oct 19, 2021 · Updated Sep 17, 2024
An Out Of Bounds (OOB) access vulnerability in the handling of responses by a Juniper Agile License (JAL) Client in Juniper Networks Junos OS and Junos OS Evolved, configured in Network Mode (to use Juniper Agile License Manager) may allow an attacker to cause a partial Denial of Service (DoS), or lead to remote code execution (RCE). The vulnerability exists in the packet parsing logic on the client that processes the response from the server using a custom protocol. An attacker with control of a JAL License Manager, or with access to the local broadcast domain, may be able to spoof a new JAL License Manager and/or craft a response to the Junos OS License Client, leading to exploitation of this vulnerability. This issue only affects Junos systems configured in Network Mode. Systems that are configured in Standalone Mode (the default mode of operation for all systems) are not vulnerable to this issue. This issue affects: Juniper Networks Junos OS: 19.2 versions prior to 19.2R3-S3; 19.3 versions prior to 19.3R3-S3; 20.1 versions prior to 20.1R2-S2, 20.1R3-S1; 20.2 versions prior to 20.2R3-S2; 20.3 versions prior to 20.3R3; 20.4 versions prior to 20.4R3; 21.1 versions prior to 21.1R2. Juniper Networks Junos OS Evolved: version 20.1R1-EVO and later versions, prior to 21.2R2-EVO. This issue does not affect Juniper Networks Junos OS versions prior to 19.2R1.
Published Oct 19, 2021 · Updated Sep 17, 2024
Some API functions allow interaction with the registry, which includes reading values as well as data modification.
Published Oct 22, 2021 · Updated Sep 17, 2024
The Web Reporting component of TIBCO Software Inc.'s TIBCO Nimbus contains easily exploitable Stored Cross Site Scripting (XSS) vulnerabilities that allow a low privileged attacker to social engineer a legitimate user with network access to execute scripts targeting the affected system or the victim's local system. A successful attack using this vulnerability requires human interaction from a person other than the attacker. Affected releases are TIBCO Software Inc.'s TIBCO Nimbus: versions 10.4.0 and below.
Published Oct 26, 2021 · Updated Sep 17, 2024
An Incomplete List of Disallowed Inputs vulnerability in Packet Forwarding Engine (PFE) of Juniper Networks Junos OS on QFX5000 Series and EX4600 Series allows an adjacent unauthenticated attacker which sends a high rate of specific multicast traffic to cause control traffic received from the network to be dropped. This will impact control protocols (including but not limited to routing-protocols) and lead to a Denial of Service (DoS). Continued receipt of this specific multicast traffic will create a sustained Denial of Service (DoS) condition. This issue affects Juniper Networks Junos OS on QFX5000 and EX4600 Series: All versions prior to 17.3R3-S12; 17.4 versions prior to 17.4R3-S5; 18.3 versions prior to 18.3R3-S5; 18.4 versions prior to 18.4R3-S9; 19.1 versions prior to 19.1R3-S6; 19.2 versions prior to 19.2R1-S7, 19.2R3-S3; 19.3 versions prior to 19.3R2-S6, 19.3R3-S3; 19.4 versions prior to 19.4R1-S4, 19.4R3-S3; 20.1 versions prior to 20.1R2-S2, 20.1R3-S1; 20.2 versions prior to 20.2R3-S2; 20.3 versions prior to 20.3R3; 20.4 versions prior to 20.4R2-S2, 20.4R3; 21.1 versions prior to 21.1R1-S1, 21.1R2.
Published Oct 19, 2021 · Updated Sep 17, 2024
