LiveActive security incident?Get immediate response
CVE archive

June 2017

Browse CVE records published in June 2017, with severity, affected products, CWE, KEV, and source-backed vulnerability context.

Showing 50 of 1499 matching CVEs · Page 12 of 30.

Unknown · CVSS Not scored

CVE-2017-17173: Due to insufficient parameters verification GPU driver of Mate 9 Pro Huawei smart phones with the versions...

Due to insufficient parameters verification GPU driver of Mate 9 Pro Huawei smart phones with the versions before LON-AL00B 8.0.0.356(C00) has an arbitrary memory free vulnerability. An attacker can tricks a user into installing a malicious application on the smart phone, and send given parameter to driver to release special kernel memory resource. Successful exploit may result in phone crash or arbitrary code execution.

Published Jun 14, 2018 · Updated Aug 5, 2024

Unknown · CVSS Not scored

CVE-2017-17171: Some Huawei smart phones have the denial of service (DoS) vulnerability due to the improper processing of m...

Some Huawei smart phones have the denial of service (DoS) vulnerability due to the improper processing of malicious parameters. An attacker may trick a target user into installing a malicious APK and launch attacks using a pre-installed app with specific permissions. Successful exploit could allow the app to send specific parameters to the smart phone driver, which will result in system restart.

Published Jun 1, 2018 · Updated Aug 5, 2024

Unknown · CVSS Not scored

CVE-2017-16652: An issue was discovered in Symfony 2.7.x before 2.7.38, 2.8.x before 2.8.31, 3.2.x before 3.2.14, and 3.3.x...

An issue was discovered in Symfony 2.7.x before 2.7.38, 2.8.x before 2.8.31, 3.2.x before 3.2.14, and 3.3.x before 3.3.13. DefaultAuthenticationSuccessHandler or DefaultAuthenticationFailureHandler takes the content of the _target_path parameter and generates a redirect response, but no check is performed on the path, which could be an absolute URL to an external domain. This Open redirect vulnerability can be exploited for example to mount effective phishing attacks.

Published Jun 13, 2018 · Updated Aug 5, 2024

Unknown · CVSS Not scored

CVE-2017-16198: ritp is a static web server.

ritp is a static web server. ritp is vulnerable to a directory traversal issue whereby an attacker can gain access to the file system by placing ../ in the URL. Access is restricted to files with a file extension, so files such as /etc/passwd are not accessible.

Published Jun 7, 2018 · Updated Aug 5, 2024

Unknown · CVSS Not scored

CVE-2017-16183: iter-server is a static file server.

iter-server is a static file server. iter-server is vulnerable to a directory traversal issue, giving an attacker access to the filesystem by placing "../" in the url.

Published Jun 7, 2018 · Updated Aug 5, 2024

Unknown · CVSS Not scored

CVE-2017-13717: Starry Station (aka Starry Router) sets the Access-Control-Allow-Origin header to "*".

Starry Station (aka Starry Router) sets the Access-Control-Allow-Origin header to "*". This allows any hosted file on any domain to make calls to the device's webserver and brute force the credentials and pull any information that is stored on the device. In this case, a user's Wi-Fi credentials are stored in clear text on the device and can be pulled easily.

Published Jun 10, 2019 · Updated Aug 5, 2024

Unknown · CVSS Not scored

CVE-2017-13718: The HTTP API supported by Starry Station (aka Starry Router) allows brute forcing the PIN setup by the user...

The HTTP API supported by Starry Station (aka Starry Router) allows brute forcing the PIN setup by the user on the device, and this allows an attacker to change the Wi-Fi settings and PIN, as well as port forward and expose any internal device's port to the Internet. It was identified that the device uses custom Python code called "rodman" that allows the mobile appication to interact with the device. The APIs that are a part of this rodman Python file allow the mobile application to interact with the device using a secret, which is a uuid4 based session identifier generated by the device the first time it is set up. However, in some cases, these APIs can also use a security code. This security code is nothing but the PIN number set by the user to interact with the device when using the touch interface on the router. This allows an attacker on the Internet to interact with the router's HTTP interface when a user navigates to the attacker's website, and brute force the credentials. Also, since the device's server sets the Access-Control-Allow-Origin header to "*", an attacker can easily interact with the JSON payload returned by the device and steal sensitive information about the device.

Published Jun 10, 2019 · Updated Aug 5, 2024

Unknown · CVSS Not scored

CVE-2017-10686: In Netwide Assembler (NASM) 2.14rc0, there are multiple heap use after free vulnerabilities in the tool nasm.

In Netwide Assembler (NASM) 2.14rc0, there are multiple heap use after free vulnerabilities in the tool nasm. The related heap is allocated in the token() function and freed in the detoken() function (called by pp_getline()) - it is used again at multiple positions later that could cause multiple damages. For example, it causes a corrupted double-linked list in detoken(), a double free or corruption in delete_Token(), and an out-of-bounds write in detoken(). It has a high possibility to lead to a remote code execution attack.

Published Jun 29, 2017 · Updated Aug 5, 2024

Unknown · CVSS Not scored

CVE-2017-10719: Recently it was discovered as a part of the research on IoT devices in the most recent firmware for Shekar...

Recently it was discovered as a part of the research on IoT devices in the most recent firmware for Shekar Endoscope that the device has default Wi-Fi credentials that are exactly the same for every device. This device acts as an Endoscope camera that allows its users to use it in various industrial systems and settings, car garages, and also in some cases in the medical clinics to get access to areas that are difficult for a human being to reach. Any breach of this system can allow an attacker to get access to video feed and pictures viewed by that user and might allow them to get a foot hold in air gapped networks especially in case of nation critical infrastructure/industries.

Published Jun 17, 2019 · Updated Aug 5, 2024

Unknown · CVSS Not scored

CVE-2017-10721: Recently it was discovered as a part of the research on IoT devices in the most recent firmware for Shekar...

Recently it was discovered as a part of the research on IoT devices in the most recent firmware for Shekar Endoscope that the device has Telnet functionality enabled by default. This device acts as an Endoscope camera that allows its users to use it in various industrial systems and settings, car garages, and also in some cases in the medical clinics to get access to areas that are difficult for a human being to reach. Any breach of this system can allow an attacker to get access to video feed and pictures viewed by that user and might allow them to get a foot hold in air gapped networks especially in case of nation critical infrastructure/industries.

Published Jun 17, 2019 · Updated Aug 5, 2024

Unknown · CVSS Not scored

CVE-2017-10718: Recently it was discovered as a part of the research on IoT devices in the most recent firmware for Shekar...

Recently it was discovered as a part of the research on IoT devices in the most recent firmware for Shekar Endoscope that any malicious user connecting to the device can change the default SSID and password thereby denying the owner an access to his/her own device. This device acts as an Endoscope camera that allows its users to use it in various industrial systems and settings, car garages, and also in some cases in the medical clinics to get access to areas that are difficult for a human being to reach. Any breach of this system can allow an attacker to get access to video feed and pictures viewed by that user and might allow them to get a foot hold in air gapped networks especially in case of nation critical infrastructure/industries.

Published Jun 17, 2019 · Updated Aug 5, 2024

Unknown · CVSS Not scored

CVE-2017-10724: Recently it was discovered as a part of the research on IoT devices in the most recent firmware for Shekar...

Recently it was discovered as a part of the research on IoT devices in the most recent firmware for Shekar Endoscope that an attacker connected to the device Wi-Fi SSID can exploit a memory corruption issue and execute remote code on the device. This device acts as an Endoscope camera that allows its users to use it in various industrial systems and settings, car garages, and also in some cases in the medical clinics to get access to areas that are difficult for a human being to reach. Any breach of this system can allow an attacker to get access to video feed and pictures viewed by that user and might allow them to get a foot hold in air gapped networks especially in case of nation critical infrastructure/industries. The firmware contains binary uvc_stream that is the UDP daemon which is responsible for handling all the UDP requests that the device receives. The client application sends a UDP request to change the Wi-Fi name which contains the following format: "SETCMD0001+0002+[2 byte length of wifipassword]+[Wifipassword]. This request is handled by "control_Dev_thread" function which at address "0x00409AE4" compares the incoming request and determines if the 10th byte is 02 and if it is then it redirects to 0x0040A7D8, which calls the function "setwifipassword". The function "setwifipassword" uses a memcpy function but uses the length of the payload obtained by using strlen function as the third parameter which is the number of bytes to copy and this allows an attacker to overflow the function and control the $PC value.

Published Jun 17, 2019 · Updated Aug 5, 2024

Unknown · CVSS Not scored

CVE-2017-10668: A Padding Oracle exists in OSCI-Transport 1.2 as used in OSCI Transport Library 1.6.1 (Java) and OSCI Trans...

A Padding Oracle exists in OSCI-Transport 1.2 as used in OSCI Transport Library 1.6.1 (Java) and OSCI Transport Library 1.6 (.NET). Under an MITM condition within the OSCI infrastructure, an attacker needs to send crafted protocol messages to analyse the CBC mode padding in order to decrypt the transport encryption.

Published Jun 30, 2017 · Updated Aug 5, 2024

Unknown · CVSS Not scored

CVE-2017-10720: Recently it was discovered as a part of the research on IoT devices in the most recent firmware for Shekar...

Recently it was discovered as a part of the research on IoT devices in the most recent firmware for Shekar Endoscope that the desktop application used to connect to the device suffers from a stack overflow if more than 26 characters are passed to it as the Wi-Fi name. This application is installed on the device and an attacker who can provide the right payload can execute code on the user's system directly. Any breach of this system can allow an attacker to get access to all the data that the user has access too. The application uses a dynamic link library(DLL) called "avilib.dll" which is used by the application to send binary packets to the device that allow to control the device. One such action that the DLL provides is change password in the function "sendchangename" which allows a user to change the Wi-Fi name on the device. This function calls a sub function "sub_75876EA0" at address 0x758784F8. The function determines which action to execute based on the parameters sent to it. The "sendchangename" passes the datastring as the second argument which is the name we enter in the textbox and integer 1 as first argument. The rest of the 3 arguments are set to 0. The function "sub_75876EA0" at address 0x75876F19 uses the first argument received and to determine which block to jump to. Since the argument passed is 1, it jumps to 0x75876F20 and proceeds from there to address 0x75876F56 which calculates the length of the data string passed as the first parameter. This length and the first argument are then passed to the address 0x75877001 which calls the memmove function which uses a stack address as the destination where the password typed by us is passed as the source and length calculated above is passed as the number of bytes to copy which leads to a stack overflow.

Published Jun 17, 2019 · Updated Aug 5, 2024

Unknown · CVSS Not scored

CVE-2017-10723: Recently it was discovered as a part of the research on IoT devices in the most recent firmware for Shekar...

Recently it was discovered as a part of the research on IoT devices in the most recent firmware for Shekar Endoscope that an attacker connected to the device Wi-Fi SSID can exploit a memory corruption issue and execute remote code on the device. This device acts as an Endoscope camera that allows its users to use it in various industrial systems and settings, car garages, and also in some cases in the medical clinics to get access to areas that are difficult for a human being to reach. Any breach of this system can allow an attacker to get access to video feed and pictures viewed by that user and might allow them to get a foot hold in air gapped networks especially in case of nation critical infrastructure/industries. The firmware contains binary uvc_stream that is the UDP daemon which is responsible for handling all the UDP requests that the device receives. The client application sends a UDP request to change the Wi-Fi name which contains the following format: "SETCMD0001+0001+[2 byte length of wifiname]+[Wifiname]. This request is handled by "control_Dev_thread" function which at address "0x00409AE0" compares the incoming request and determines if the 10th byte is 01 and if it is then it redirects to 0x0040A74C which calls the function "setwifiname". The function "setwifiname" uses a memcpy function but uses the length of the payload obtained by using strlen function as the third parameter which is the number of bytes to copy and this allows an attacker to overflow the function and control the $PC value.

Published Jun 17, 2019 · Updated Aug 5, 2024

Unknown · CVSS Not scored

CVE-2017-10722: Recently it was discovered as a part of the research on IoT devices in the most recent firmware for Shekar...

Recently it was discovered as a part of the research on IoT devices in the most recent firmware for Shekar Endoscope that the desktop application used to connect to the device suffers from a stack overflow if more than 26 characters are passed to it as the Wi-Fi password. This application is installed on the device and an attacker who can provide the right payload can execute code on the user's system directly. Any breach of this system can allow an attacker to get access to all the data that the user has access too. The application uses a dynamic link library(DLL) called "avilib.dll" which is used by the application to send binary packets to the device that allow to control the device. One such action that the DLL provides is change password in the function "sendchangepass" which allows a user to change the Wi-Fi password on the device. This function calls a sub function "sub_75876EA0" at address 0x7587857C. The function determines which action to execute based on the parameters sent to it. The "sendchangepass" passes the datastring as the second argument which is the password we enter in the textbox and integer 2 as first argument. The rest of the 3 arguments are set to 0. The function "sub_75876EA0" at address 0x75876F19 uses the first argument received and to determine which block to jump to. Since the argument passed is 2, it jumps to 0x7587718C and proceeds from there to address 0x758771C2 which calculates the length of the data string passed as the first parameter.This length and the first argument are then passed to the address 0x7587726F which calls a memmove function which uses a stack address as the destination where the password typed by us is passed as the source and length calculated above is passed as the number of bytes to copy which leads to a stack overflow.

Published Jun 17, 2019 · Updated Aug 5, 2024

Unknown · CVSS Not scored

CVE-2017-9996: The cdxl_decode_frame function in libavcodec/cdxl.c in FFmpeg 2.8.x before 2.8.12, 3.0.x before 3.0.8, 3.1....

The cdxl_decode_frame function in libavcodec/cdxl.c in FFmpeg 2.8.x before 2.8.12, 3.0.x before 3.0.8, 3.1.x before 3.1.8, 3.2.x before 3.2.5, and 3.3.x before 3.3.1 does not exclude the CHUNKY format, which allows remote attackers to cause a denial of service (heap-based buffer overflow and application crash) or possibly have unspecified other impact via a crafted file.

Published Jun 28, 2017 · Updated Aug 5, 2024

Unknown · CVSS Not scored

CVE-2017-9986: The intr function in sound/oss/msnd_pinnacle.c in the Linux kernel through 4.11.7 allows local users to cau...

The intr function in sound/oss/msnd_pinnacle.c in the Linux kernel through 4.11.7 allows local users to cause a denial of service (over-boundary access) or possibly have unspecified other impact by changing the value of a message queue head pointer between two kernel reads of that value, aka a "double fetch" vulnerability.

Published Jun 28, 2017 · Updated Aug 5, 2024

Unknown · CVSS Not scored

CVE-2017-9992: Heap-based buffer overflow in the decode_dds1 function in libavcodec/dfa.c in FFmpeg before 2.8.12, 3.0.x b...

Heap-based buffer overflow in the decode_dds1 function in libavcodec/dfa.c in FFmpeg before 2.8.12, 3.0.x before 3.0.8, 3.1.x before 3.1.8, 3.2.x before 3.2.5, and 3.3.x before 3.3.1 allows remote attackers to cause a denial of service (application crash) or possibly have unspecified other impact via a crafted file.

Published Jun 28, 2017 · Updated Aug 5, 2024