Browse critical-severity CVEs with CVSS, affected products, CWE, KEV, remediation priorities, and source-backed Glexia context.
Showing 50 of 24955 matching CVEs · Page 67 of 500.
Cypher injection vulnerability in the Neo4j persistence layer when processing some FIQL search conditions. This issue affects Apache Syncope: from 3.0.0-M0 through 3.0.16, from 4.0.0-M0 through 4.0.7, from 4.1.0-M0 through 4.1.2. Users are recommended to upgrade to version 4.0.8 / 4.1.3, which fix this issue.
Published Sep 14, 2026 · Updated Sep 14, 2026
Authentication bypass by spoofing vulnerability in Apache Syncope. When the configured JWKS settings for internal JWT authentication are disclosed (at least protocol and key), an attacker can spoof another user's privileges after completing a successful authentication and obtaining a valid JWT. This issue affects Apache Syncope: from 3.0.0-M0 through 3.0.16, from 4.0.0-M0 through 4.0.7, from 4.1.0-M0 through 4.1.2. Users are recommended to upgrade to version 4.0.8 / 4.1.3, which fix this issue.
Published Sep 14, 2026 · Updated Sep 14, 2026
Description A submitted topology carries two lists of blobstore keys, `dependency_jars` and `dependency_artifacts`, which the client fills in after uploading the corresponding blobs. Nimbus performed no validation of their contents on the submission path, yet acts on them in two places. During cleanup of a finished topology, Nimbus deletes the keys named in those lists, and the deletion is performed as the Nimbus subject, for which the blobstore short-circuits its ACL check. A submitter who listed a key belonging to another topology, such as its `-stormjar.jar`, could therefore cause that blob to be deleted when their own topology was cleaned up. Separately, on acquiring leadership a Nimbus compares the dependency keys of all active topologies against the blobstore contents and surrenders leadership if any is missing. A single key that does not exist, on a single active topology, therefore causes every Nimbus to acquire leadership, surrender it and requeue indefinitely, leaving the cluster without a leader and unable to schedule, clean up or accept submissions. Mitigation Upgrade to 3.1.0, where a submission is refused unless every entry in both lists is a dependency blob key and exists in the blobstore. Note that this validates new submissions only; a topology stored by an affected version with an invalid list is unaffected by the upgrade. An operator whose cluster is failing to retain a leader should inspect the Nimbus log for the dependency keys reported as missing and remove or resubmit the topology naming them. Users who cannot upgrade immediately should restrict topology submission to trusted principals. Credit This issue was discovered by rzo1 while investigating an unrelated blobstore defect.
Published Sep 14, 2026 · Updated Sep 14, 2026
Improper verification of cryptographic signature vulnerability in Apache Syncope. When SRA is configured for OAuth 2.0 without JWKS set URI assigned, an attacker can forge arbitrary JWTs to impersonate any user identity and permissions, gaining full access to services proxied by SRA. This issue affects Apache Syncope: from 3.0.0-M0 through 3.0.16, from 4.0.0-M0 through 4.0.7, from 4.1.0-M0 through 4.1.2. Users are recommended to upgrade to version 4.0.8 / 4.1.3, which fix this issue.
Published Sep 14, 2026 · Updated Sep 14, 2026
Postgres MCP Pro 0.3.0 contains a restricted-mode bypass vulnerability where function-name validation is not applied to RangeFunction nodes in FROM clauses. Attackers can execute file-reading functions like pg_read_file through FROM-clause syntax to read arbitrary files despite restricted-mode protections.
Published Sep 4, 2026 · Updated Sep 14, 2026
sift (sift.js) 17.1.3 enumerates query keys with for...in, which walks the object prototype chain, and dispatches any matched operator key including $where. The $where operation compiles a string value into a function using new Function unless CSP_ENABLED is set (not set by default). As a result, if a prototype-pollution primitive elsewhere in the process sets Object.prototype.$where to a malicious string, even benign filter calls such as sift({}) execute arbitrary JavaScript. Additionally, passing an untrusted query object containing a string $where directly to sift results in code execution under the default configuration.
Published Sep 4, 2026 · Updated Sep 14, 2026
excel-mcp-server 0.1.8 fails to enforce path confinement in stdio mode when EXCEL_FILES_PATH is unset, allowing attackers to read and write arbitrary files. Attackers can supply unchecked file paths to read and write tools to access any file accessible to the process.
Published Sep 4, 2026 · Updated Sep 14, 2026
TEN Framework 0.11.71 contains unauthenticated arbitrary file read and write vulnerabilities in the TMAN Designer file-content API endpoints. Attackers can submit POST and PUT requests to the /api/designer/v1/file-content endpoints to read arbitrary files or write malicious content to system paths, enabling code execution through authorized_keys, cron files, or executable graph files.
Published Sep 4, 2026 · Updated Sep 14, 2026
Incorrect Authorization vulnerability in Apache Syncope. Delegated administration security checks performed by Reconciliation service's pull and push, being incomplete, could accept calls by administrator not provided with adequate entitlements. This issue affects Apache Syncope: from 3.0.0-M0 through 3.0.16, from 4.0.0-M0 Through 4.0.7, from 4.1.0-M0 through 4.1.2. Users are recommended to upgrade to version 4.0.8 / 4.1.3, which fix this issue.
Published Sep 14, 2026 · Updated Sep 14, 2026
Improper Privilege Management vulnerability in Apache Syncope. Delegations can be created or updated with Roles not owned by the delegating User, or not for the same Realm subtree under the delegation management was granted for. This issue affects Apache Syncope: from 3.0.0-M0 through 3.0.16, from 4.0.0-M0 Through 4.0.7, from 4.1.0-M0 through 4.1.2. Users are recommended to upgrade to version 4.0.8 / 4.1.3, which fix this issue.
Published Sep 14, 2026 · Updated Sep 14, 2026
Incorrect Authorization vulnerability in Apache Syncope. Any search requests are transformed into SQL, Neo4J or Elasticsearch / Opensearch queries, depending on the actual deployment configuration. An important component of such transformation is the Realms filter, which ensures that the search results are matching the requester's permissions. For non-recursive search requests it is possible that such Realms filter is rendered as empty, thus voiding any restriction on requester privileges. This issue affects Apache Syncope: from 3.0.0-M0 through 3.0.16, from 4.0.0-M0 Through 4.0.7, from 4.1.0-M0 through 4.1.2. Users are recommended to upgrade to version 4.0.8 / 4.1.3, which fix this issue.
Published Sep 14, 2026 · Updated Sep 14, 2026
Missing Authorization vulnerability in Apache Syncope. An administrator with task execution entitlements might be able to mass (de)provision group members, regardless of their group-related administration capabilities. This issue affects Apache Syncope: from 3.0.0-M0 through 3.0.16, from 4.0.0-M0 Through 4.0.7, from 4.1.0-M0 through 4.1.2. Users are recommended to upgrade to version 4.0.8 / 4.1.3, which fix this issue.
Published Sep 14, 2026 · Updated Sep 14, 2026
Improper Neutralization of Special Elements used in an SQL Command ('SQL Injection') vulnerability in Apache Syncope. An administrator with adequate entitlements can achieve execution of arbitrary SQL via stacked queries, leveraging unsanitized entityKey and opEvent parameters. This issue affects Apache Syncope: from 3.0.0-M0 through 3.0.16, from 4.0.0-M0 Through 4.0.7, from 4.1.0-M0 through 4.1.2. Users are recommended to upgrade to version 4.0.8 / 4.1.3, which fix this issue.
Published Sep 14, 2026 · Updated Sep 14, 2026
In Eclipse Embedded CDT versions 6.0 to 6.7 if the CMSIS-Pack archive extracts a compromised CMSIS pack the archive extraction can extract files to locations outside of the pack, allowing writing of arbitrary files to other locations on disk.
Published Sep 14, 2026 · Updated Sep 14, 2026
The The Events Calendar plugin for WordPress is vulnerable to Remote Code Execution in all versions up to, and including, 6.17.4 via the is_safe_widget_instance function. This is due to insufficient protection in is_safe_widget_instance, which can be bypassed because PHP fires magic methods during its pre-parse, combined with enable_rendering_widget_copied() forging a valid wp_hash integrity attribute before unserialize() is reached. This makes it possible for unauthenticated attackers to execute code on the server. This is exploitable without authentication or approval because the plugin's V2 single-event template runs do_blocks() over buffered comment HTML, and WordPress returns a moderation-hash URL that allows an unauthenticated commenter to immediately view their own pending comment, delivering the injected block markup to the vulnerable code path before any moderation occurs. This does require comments to be enabled and visible on events.
Published Sep 12, 2026 · Updated Sep 14, 2026
Incorrect privilege assignment vulnerability in Apache Syncope. When the configured JWKS settings for internal JWT authentication are disclosed (at least protocol and key), an attacker can obtain admin privileges after completing a successful authentication and obtaining a valid low-privileges JWT. This issue affects Apache Syncope: from 3.0.0-M0 through 3.0.16, from 4.0.0-M0 through 4.0.7, from 4.1.0-M0 through 4.1.2. Users are recommended to upgrade to version 4.0.8 / 4.1.3, which fix this issue.
Published Sep 14, 2026 · Updated Sep 14, 2026
Yayson is a library for serializing and reading JSON API data in JavaScript. Prior to 4.3.0, Store and LegacyStore use attacker-controlled JSON:API type, id, and relationship names as keys in plain-object lookup tables in src/yayson/store.ts and src/yayson/legacy-store.ts. A document whose type is __proto__ causes model-cache writes to modify Object.prototype, with the attacker controlling the polluted property name through id and its value through attributes. The malicious type can also be supplied by an included resource, and LegacyStore is reachable when a configured types mapping resolves to __proto__. Unsafe relationship names including __proto__, constructor, and prototype provide additional document-derived member paths. The resulting process-wide prototype pollution can cause denial of service and logic corruption; authorization bypass or code execution depends on suitable gadgets in the consuming application. This issue is fixed in version 4.3.0.
Published Sep 14, 2026 · Updated Sep 14, 2026
PraisonAI is a multi-agent teams system. Prior to praisonai 4.6.59 and praisonaiagents 1.6.59, the unauthenticated POST /api/v1/runs Jobs API accepts attacker-controlled agent_yaml, and the approve field can mark execute_command as YAML-approved before @require_approval checks critical tools. This chain allows a remote caller to cause a configured language model agent to invoke arbitrary operating-system commands without credentials or operator interaction. This vulnerability is fixed in praisonai 4.6.59 and praisonaiagents 1.6.59 as fixed versions.
Published Sep 14, 2026 · Updated Sep 14, 2026
Incorrect Authorization vulnerability in Apache Syncope. An administrator with ClientApp's update entitlement is unable to perform the related operation, while ClientApp's create entitlement is checked both for create and update operations on ClientApp. This issue affects Apache Syncope: from 3.0.0-M0 through 3.0.16, from 4.0.0-M0 Through 4.0.7, from 4.1.0-M0 through 4.1.2. Users are recommended to upgrade to version 4.0.8 / 4.1.3, which fix this issue.
Published Sep 14, 2026 · Updated Sep 14, 2026
Incorrect Authorization vulnerability in Apache Syncope. An administrator with adequate entitlements in a given Realm may be able to read via REST the full Connector configuration, confidential properties included, scoped in another Realm and thus be able to effectively duplicate such Connector instance into the Realm they have administration rights for. This issue affects Apache Syncope: from 3.0.0-M0 through 3.0.16, from 4.0.0-M0 Through 4.0.7, from 4.1.0-M0 through 4.1.2. Users are recommended to upgrade to version 4.0.8 / 4.1.3, which fix this issue.
Published Sep 14, 2026 · Updated Sep 14, 2026
DotVVM is an open source MVVM framework for web applications. Prior to 4.2.11, 4.3.15, and 5.0.0-preview09-final, AuthorizeActionFilter performs no authorization because its explicit ICommandActionFilter.OnCommandExecutingAsync, IViewModelActionFilter.OnViewModelCreatedAsync, and IPresenterActionFilter.OnPresenterExecutingAsync implementations return completed tasks instead of invoking the corresponding checks. Applications relying on this filter can therefore expose protected commands, view models, or presenters to unauthorized requests without any special bypass technique. AuthorizeAttribute correctly implements the same interfaces and can be used as a workaround. This issue is fixed in versions 4.2.11, 4.3.15, and 5.0.0-preview09-final.
Published Sep 14, 2026 · Updated Sep 14, 2026
PraisonAI is a multi-agent teams system. Prior to 4.6.59, the default UI host applications expose POST /api/mcp/connect without mandatory authentication and accept caller-controlled command and args values that PraisonAIUI passes to StdioMCPClient to start a local process. Because the UI commands bind to 0.0.0.0 by default, a reachable unauthenticated client can execute commands as the UI service account even when the MCP handshake later fails. This vulnerability is fixed in 4.6.59.
Published Sep 14, 2026 · Updated Sep 14, 2026
ESPHome Device Builder Dashboard is a dashboard for the ESPHome home management software. Prior to version 1.0.12, the dashboard reads its authentication credentials from `$ESPHOME_USERNAME` and `$ESPHOME_PASSWORD`. Earlier versions, and the legacy `esphome` dashboard, read the bare `$USERNAME` and `$PASSWORD` instead. When the env vars were renamed the bare names were dropped with no fallback, so an operator who had protected their dashboard with `USERNAME` / `PASSWORD` (as the older getting started guide documented) loses authentication on upgrade and the dashboard starts open to anyone who can reach its port. The issue is fixed in 1.0.12. The bare `$USERNAME` / `$PASSWORD` are accepted again as a deprecated fallback so previously protected instances stay protected across the upgrade without operator intervention, with a loud deprecation warning at startup directing operators to rename them to `$ESPHOME_USERNAME` / `$ESPHOME_PASSWORD`. The fallback is gated on `$PASSWORD` being set and is only adopted as a pair, so the OS provided `$USERNAME` is never read on its own and the original collision footgun stays closed. A lone bare `$PASSWORD` with no username still fails loud as a credential mismatch rather than starting unauthenticated. This restores compatibility rather than failing closed on the legacy names, because the priority is that an instance which was protected before the upgrade stays protected without the operator having to act; the deprecation warning plus a future removal handles the migration. Operators should migrate to the `$ESPHOME_*` names. The esphome container delivers the fix in the 2026.6.2 release, which bumps its pinned `esphome-device-builder` version to 1.0.12. Without upgrading, restore authentication immediately by setting the new env vars to the same values, on any affected version. Alternatively, do not expose the dashboard port to untrusted networks, and check the startup logs for the `WITHOUT AUTHENTICATION` banner to confirm whether a given instance is currently open.
Published Sep 14, 2026 · Updated Sep 14, 2026
Use of hardcoded default credentials in Xiongmai IP Camera XM530 firmware HMT.CM2005-v220608.1837 and earlier stores static account credentials in unencrypted plaintext within bin/config.xml and compiled into the Sofia executable, allowing remote attackers to gain full administrative control over the camera.
Published Sep 11, 2026 · Updated Sep 14, 2026
SGLang allows unauthenticated pickle deserialization through /update_weights_from_tensor when no auth keys are configured, and the SafeUnpickler policy can be bypassed because builtins.import and builtins.getattr are resolvable, enabling code execution via pickle REDUCE.
Published Sep 11, 2026 · Updated Sep 14, 2026
sngrep through 1.8.4 contains stack buffer overflow vulnerabilities in SIP attribute formatting routines when header values exceed the 255-byte buffer limit. Attackers can craft malicious SIP packets with oversized Call-ID, X-Call-ID, or other header fields to overflow stack buffers and cause crashes or execute arbitrary code during packet parsing and rendering.
Published Sep 12, 2026 · Updated Sep 14, 2026
GetSimple CMS is a content management system (CMS), and GetSimple CMS CE is the community edition of that CMS. A logic flaw in GetSimple CMS (v3.4.0a and below) and GetSimpleCMS-CE (v3.3.22 and below) allows unauthenticated attackers to create a new administrator account. The application features an automated security control designed to delete the sensitive `admin/setup.php` file post-installation. However, this control is neutralized by a self-exclusion bug within the deletion logic, leaving the setup script accessible for unauthorized account creation even after a legitimate installation is completed. As of time of publication, no known patched versions are available.
Published Sep 11, 2026 · Updated Sep 14, 2026
An issue in Puma v.5.0.0 and before v.8.0.3 allows an attacker to execute arbitrary code via the ext/puma_http11/http11_parser.rl file
Published Sep 10, 2026 · Updated Sep 14, 2026
PraisonAI is a multi-agent teams system. Prior to praisonaiagents 1.6.59, ToolsMCPServer.run_sse and launch_tools_mcp_server bind to 0.0.0.0 and create /sse and /messages/ routes without invoking the available SecurityConfig authentication, origin-validation, or DNS-rebinding controls. Any reachable client can list and invoke registered tools, and a browser can target a local instance through DNS rebinding, with impact determined by the registered file, shell, and code-execution tools. This vulnerability is fixed in praisonaiagents 1.6.59.
Published Sep 14, 2026 · Updated Sep 14, 2026
PraisonAI is a multi-agent teams system. Prior to 4.6.62, src/praisonai/praisonai/tools/multiedit.py passes the LLM-controlled filepath parameter directly to open for reading and writing without traversal rejection, symlink resolution, a workspace boundary, or protected-path checks. Prompt-influenced agents can read files through edit and diff behavior or overwrite files accessible to the process, exposing secrets and enabling persistence or application tampering. This issue is fixed in 4.6.62.
Published Sep 14, 2026 · Updated Sep 14, 2026
Garlic-Hub v1.0.1 is vulnerable to SQL Injection in src/Modules/Items/Repositories/ItemsRepository.php.
Published Sep 10, 2026 · Updated Sep 14, 2026
PraisonAI is a multi-agent teams system. Prior to 4.6.58, recipe serve installs APIKeyAuthMiddleware or JWTAuthMiddleware when an operator selects api-key or JWT authentication, but each middleware forwards requests when PRAISONAI_API_KEY or PRAISONAI_JWT_SECRET and the corresponding recipe value are absent. Unauthenticated clients can then reach recipe execution, input, and output surfaces and may trigger connected tools despite the operator explicitly enabling authentication. This issue is fixed in 4.6.58.
Published Sep 14, 2026 · Updated Sep 14, 2026
PraisonAI is a multi-agent teams system. Prior to 4.6.58, praisonai.jobs.server.create_app mounts praisonai.jobs.router.create_router under /api/v1/runs without authentication or per-job authorization. Network clients can submit attacker-controlled prompts and agent configuration, list and read jobs, stream results, and cancel or delete other jobs, exposing service credentials and connected tool capabilities to unauthorized agent execution. This vulnerability is fixed in 4.6.58.
Published Sep 14, 2026 · Updated Sep 14, 2026
SQL Injection vulnerability in Woltlab WCF v.6.2.4 and before allows a remote attacker to updateUserOptions in UserEditor.class.php and the update action in UserAction.class.php
Published Sep 11, 2026 · Updated Sep 14, 2026
The The Events Calendar plugin for WordPress is vulnerable to Remote Code Execution in all versions up to, and including, 6.17.3 via the parse_array function. This is due to insufficient validation of the widget 'classes' map, allowing a plain-array payload to bypass the is_safe_widget_instance() object check and reach the callable-invocation sink in Element_Classes::parse_array(). This makes it possible for unauthenticated attackers to execute code on the server. Exploitation requires that the targeted site has comments enabled on tribe_events posts and that at least one comment containing a crafted wp:legacy-widget block has been submitted, as the attack chain is triggered when do_blocks() processes the single-event HTML including the comment area.
Published Sep 12, 2026 · Updated Sep 14, 2026
An issue in ZJU-FAST-Lab EGO-Planner-v2 All versions up to commit 5c99a95880401e2599638d567abc0e240396cb42 allows unsafe vehicle motion via improper handling of expired trajectory data in the replanning pipeline
Published Sep 10, 2026 · Updated Sep 14, 2026
A vulnerability was detected in Totolink A3002MU Hh-B20211125.1046. Impacted is the function formNewSchedule of the file /boafrm/formNewSchedule of the component boa. The manipulation of the argument submit-url results in buffer overflow. The attack may be performed from remote. The exploit is now public and may be used.
Published Sep 14, 2026 · Updated Sep 14, 2026
Forgejo before 16.0.4 allows remote code execution via a crafted template repository because template expansion on files in .forgejo/template is mishandled.
Published Sep 10, 2026 · Updated Sep 14, 2026
Unauthenticated Remote Code Execution (RCE) in ACPT (Pro) - Custom Post Types Plugin for WordPress <= 2.0.47 versions.
Published Jun 16, 2026 · Updated Sep 14, 2026
A flaw was found in the Konnectivity proxy-server configuration for hosted control planes. The agent-facing listener was started without --cluster-ca-cert (and without token-based agent authentication), so client certificates were not validated. A remote attacker who can reach the Konnectivity cluster endpoint could connect as an unauthenticated agent, join the routing pool, and potentially proxy, inspect, modify, or drop control-plane-to-node traffic.
Published Jul 20, 2026 · Updated Sep 14, 2026
An improper validation vulnerability exists within PingAM where a well-crafted request allows arbitrary or protected ID Token claims to be set or overridden. In certain configurations this could allow an attacker to bypass authentication controls via spoofing leading to privilege escalation or impersonation.
Published Sep 14, 2026 · Updated Sep 14, 2026
LightLLM through 1.2.0 contains a remote code execution vulnerability in the Config Server's unauthenticated /visual_register WebSocket endpoint that passes the first client frame directly to pickle.loads(). Attackers can reach the Config Server port and send a malicious serialized payload with a __reduce__ method to execute arbitrary code with Config Server process privileges.
Published Sep 14, 2026 · Updated Sep 14, 2026
The LdapAuth and LinOTPAuth authentication plugins in MISP contain an authentication bypass vulnerability. Both LdapAuthenticate and LinOTPAuthenticate replace CakePHP's FormAuthenticate class but fail to replicate its _checkFields() input validation guard. As a result, the email and password fields extracted from the login request are passed to downstream authentication logic without verifying that they are non-empty strings. In the LDAP authenticator, an empty or null password is forwarded to ldap_bind(). Per RFC 4513 section 5.1.2, a bind request with a valid DN and an empty password constitutes an unauthenticated bind, which many LDAP directory servers accept as successful. An attacker who knows any valid user email address in the directory can therefore authenticate as that user without possessing a password. Additionally, non-string values (null, false, arrays) are either coerced to empty strings by ldap_bind(), raise TypeErrors, or are misinterpreted as find conditions in _findUser(), all of which can lead to unintended authentication outcomes. In the LinOTP authenticator, the same missing guard allows non-string credentials to be concatenated into the LinOTP verification request, and in the mixed-authentication branch an empty password is accepted against a stored hash of the empty string. A secondary issue in the LDAP authenticator is that newly created user accounts (auto-provisioned on first LDAP login) were assigned an empty password. Because the save path skips validation, the empty string is hashed and stored. If the user later ceases to be found in LDAP and the mixed-authentication fallback is used, the stored hash of the empty string verifies against an empty password, again permitting unauthenticated access. The vulnerability requires that the affected plugin (LdapAuth or LinOTPAuth) is enabled on the MISP instance and that the attacker knows at least one valid email address registered in the directory or MISP user store. No prior authentication is required. Successful exploitation grants the attacker the full privileges of the impersonated user, which may include administrative access to threat intelligence data. Version affected: ≤2.5.45
Published Sep 14, 2026 · Updated Sep 14, 2026
python-jose through 3.5.0 fails to properly validate asymmetric keys in HMAC initialization, accepting DER-encoded public keys that lack PEM armor or SSH prefixes. Attackers holding the service's public key can forge HS256 tokens that pass verification when algorithms are not explicitly restricted. This is an incomplete fix for CVE-2024-33663.
Published Sep 3, 2026 · Updated Sep 14, 2026
MOOS core-moos through 10.4.0 contains an authentication bypass vulnerability in the optional MOOSDB HTTP server that allows unauthenticated clients to write variables. Attackers can send HTTP requests with variable names and values to the MOOSDB HTTP server port to modify MOOS variables including actuator and override commands without authentication.
Published Sep 3, 2026 · Updated Sep 14, 2026
MOOS essential-moos pShare through 10.0.1 fails to properly authorize PSHARE_CMD messages, allowing any publisher to reconfigure network routes and listeners at runtime. Attackers can send crafted PSHARE_CMD messages with cmd=output or cmd=input parameters to open new listeners on arbitrary addresses and redirect or duplicate bus traffic to attacker-controlled destinations.
Published Sep 3, 2026 · Updated Sep 14, 2026
MOOS-IvP through 24.8.1 contains a buffer overflow vulnerability in StringToIvPFunction() where dimension, piece, and degree counts from encoded BHV_IPF payloads are used as allocation sizes and loop bounds without validation. Attackers can supply crafted payloads with mismatched dimension values to write attacker-controlled doubles past the end of the IvPBox weight array, causing memory corruption and potential code execution.
Published Sep 3, 2026 · Updated Sep 14, 2026
ipmi-oem in FreeIPMI before 1.6.19 has a stack-based buffer overflow in _output_dell_system_info_cmc_info in ipmi-oem/ipmi-oem-dell.c (cmc-info subcommand to dell get-system-info).
Published Sep 4, 2026 · Updated Sep 14, 2026
A vulnerability has been identified in Reyrolle 7SR5 (All versions < V2.70). A random number generator is used to generate security-relevant values (such as session identifiers used for authentication purposes) that is not initialized with a True Random Number Generator (TRNG), resulting in a predictable sequence of generated values. This could allow an unauthenticated remote attacker to more easily predict the generated values and impersonate a legitimate authenticated user, potentially gaining unauthorized access to the device.
Published Sep 8, 2026 · Updated Sep 14, 2026
An issue in the /cas/login component of sso-master v1.0.0 allows attackers to authenticate into the application without a password via sending a crafted POST request.
Published Sep 8, 2026 · Updated Sep 14, 2026
