LiveActive security incident?Get immediate response
MITRE ATT&CK® Technique

T1498.001: Direct Network Flood

Adversaries may attempt to cause a denial of service (DoS) by directly sending a high-volume of network traffic to a target. This DoS attack may also reduce the availability and functionality of the targeted system(s) and network. Direct Network Floods are when one or more systems are used to send a high-volume of network packets towards the targeted service's network. Almost any network protocol may be used for flooding. Stateless protocols such as UDP or ICMP are commonly used but stateful protocols such as TCP can be used as well.

Botnets are commonly used to conduct network flooding attacks against networks and services. Large botnets can generate a significant amount of traffic from systems spread across the global Internet. Adversaries may have the resources to build out and control their own botnet infrastructure or may rent time on an existing botnet to conduct an attack. In some of the worst cases for distributed DoS (DDoS), so many systems are used to generate the flood that each one only needs to send out a small amount of traffic to produce enough volume to saturate the target network. In such circumstances, distinguishing DDoS traffic from legitimate clients becomes exceedingly difficult. Botnets have been used in some of the most high-profile DDoS flooding attacks, such as the 2012 series of incidents that targeted major US banks.[1]

EnterpriseT1498.001Sub-techniqueObject v1.4Modified
Discuss defensive coverageBack to ATT&CK
Glexia's Take · Automated analysis

Security context for executives and security teams

Automation confidenceMedium

T1498.001: Direct Network Flood describes Adversaries may attempt to cause a denial of service (DoS) by directly sending a high-volume of network traffic to a target. This DoS attack may also reduce the availability and functionality of the targeted system(s) and network. [Direct Network Flood](https://attack.mitre.org/techniques/T1498/001)s are when one or more systems are used to send a high-volume of network packets towards the targeted service's network. Almost any network protocol may be used for flooding. Stateless protocols such as UDP or ICMP are c...

Executive priority

T1498.001: Direct Network Flood is an official MITRE ATT&CK technique. Glexia treats it as defensive behavior context for prioritizing monitoring, control validation, and response planning without using the object by itself as an attribution claim.

Technical view

Security teams should validate T1498.001: Direct Network Flood by reviewing the official ATT&CK relationships, mapped tactics (impact), supported platforms (Windows, IaaS, Linux, macOS), and available local telemetry before making detection or mitigation decisions.

Likely telemetry

  • Official ATT&CK relationships and object metadata
  • Cloud control-plane, SaaS audit, and container platform logs
  • Network, endpoint, and security-tool telemetry

Detection direction

  • Validate whether T1498.001: Direct Network Flood appears in your detection coverage and tabletop scenarios.
  • Use the object to align executive risk language with SOC, incident response, and detection engineering work.
  • Do not treat ATT&CK relationship context as attribution without corroborating evidence.

Mitigation priorities

  • Map the object to existing controls and identify missing telemetry or response ownership.
  • Prioritize mitigations that reduce exposure on the listed platforms and tactics.
  • Review adjacent ATT&CK relationships before changing policy, detections, or reporting language.
Additional notes and limits

Baseline Glexia take generated from the official MITRE ATT&CK STIX object, source hash, tactics, platforms, and detection fields. It is safe to replace with a richer model-generated take for the same source hash later.

This baseline take is source-grounded and schema-validated, but it does not include environment-specific telemetry, incident evidence, or threat-intelligence corroboration.

Generated from the cited source records. This long-tail analysis has not been individually reviewed by a named human.

Official MITRE ATT&CK definition

Direct Network Flood

Adversaries may attempt to cause a denial of service (DoS) by directly sending a high-volume of network traffic to a target. This DoS attack may also reduce the availability and functionality of the targeted system(s) and network. Direct Network Floods are when one or more systems are used to send a high-volume of network packets towards the targeted service's network. Almost any network protocol may be used for flooding. Stateless protocols such as UDP or ICMP are commonly used but stateful protocols such as TCP can be used as well.

Botnets are commonly used to conduct network flooding attacks against networks and services. Large botnets can generate a significant amount of traffic from systems spread across the global Internet. Adversaries may have the resources to build out and control their own botnet infrastructure or may rent time on an existing botnet to conduct an attack. In some of the worst cases for distributed DoS (DDoS), so many systems are used to generate the flood that each one only needs to send out a small amount of traffic to produce enough volume to saturate the target network. In such circumstances, distinguishing DDoS traffic from legitimate clients becomes exceedingly difficult. Botnets have been used in some of the most high-profile DDoS flooding attacks, such as the 2012 series of incidents that targeted major US banks.[1]

View the same entry on attack.mitre.org (MITRE-hosted reference; in-page links above use the Glexia ATT&CK library.)

Glexia analysis

How security teams should use this page

Treat this object as behavior context, not an attribution claim. Validate the related groups, software, data sources, and mitigations against official ATT&CK relationships and your own telemetry before making control-coverage decisions.

ATT&CK relationship table

Related techniques

This mirrors the MITRE pattern of making group, software, campaign, and technique relationships scannable. Relationship notes come from mirrored ATT&CK relationship text when available.

1 rows
DomainIDNameRelationship / procedure
EnterpriseT1498Network Denial of ServiceThis object subtechnique of Network Denial of Service.
Relationship explorer

All related ATT&CK context

mitigates · MitigationM1037: Filter Network TrafficEnterprisesubtechnique of · TechniqueT1498: Network Denial of ServiceEnterprisedetects · Detection StrategyDET0343: Direct Network Flood Detection across IaaS, Linux, Windows, and macOSEnterprise
Mitigations

Mitigation direction

MitigationEnterprise

M1037: Filter Network Traffic

Employ network appliances and endpoint software to filter ingress, egress, and lateral network traffic. This includes protocol-based filtering, enforcing firewall rules, and blocking or restricting traffic based on predefined conditions to limit adversary movement and data exfiltration. This mitigation can be implemented through the following measures:

Ingress Traffic Filtering:

- Use Case: Configure network firewalls to allow traffic only from authorized IP addresses to public-facing servers. - Implementation: Limit SSH (port 22) and RDP (port 3389) traffic to specific IP ranges.

Egress Traffic Filtering:

- Use Case: Use firewalls or endpoint security software to block unauthorized outbound traffic to prevent data exfiltration and command-and-control (C2) communications. - Implementation: Block outbound traffic to known malicious IPs or regions where communication is unexpected.

Protocol-Based Filtering:

- Use Case: Restrict the use of specific protocols that are commonly abused by adversaries, such as SMB, RPC, or Telnet, based on business needs. - Implementation: Disable SMBv1 on endpoints to prevent exploits like EternalBlue.

Network Segmentation:

- Use Case: Create network segments for critical systems and restrict communication between segments unless explicitly authorized. - Implementation: Implement VLANs to isolate IoT devices or guest networks from core business systems.

Application Layer Filtering:

- Use Case: Use proxy servers or Web Application Firewalls (WAFs) to inspect and block malicious HTTP/S traffic. - Implementation: Configure a WAF to block SQL injection attempts or other web application exploitation techniques.

Change history

Object version and sync metadata

The fields below describe the current mirrored snapshot. When Glexia retains multiple ATT&CK source imports, you can open the table to compare the same object across releases (hashes and MITRE timestamps). For MITRE’s own release notes and roadmap, see ATT&CK resources — Updates.

ATT&CK release
19.2
Object version
1.4
Created
Modified
Raw hash
e970972a648872ed...
Imported snapshots across ATT&CK releases(2)
ReleaseBundle importedObject versionModifiedStatusRaw hash
19.21.4Current bundlee970972a6488…
19.11.4Older bundlee970972a6488…
Raw source

Mirrored ATT&CK source object

The raw object is retained through the mirrored ATT&CK source bundle and object hash. The raw endpoint returns the exact object from the mirrored bundle when available.

Open mirrored raw JSONOpen MITRE-hosted copy
Source references

External references and citations

MITRE external references are preserved separately from Glexia analysis so citations remain traceable to their original source records.

  1. [1]
    USNYAG IranianBotnet March 2016

    Preet Bharara, US Attorney. (2016, March 24). Retrieved April 23, 2019.

    Open source URL
  2. [2]
    Cisco DoSdetectNetflow

    Cisco. (n.d.). Detecting and Analyzing Network Threats With NetFlow. Retrieved April 25, 2019.

    Open source URL
  3. [3]
    mitre-attackT1498.001
    Open source URL
Source and licensing

Source: MITRE ATT&CK®. © 2026 The MITRE Corporation. This work is reproduced and distributed with the permission of The MITRE Corporation. MITRE ATT&CK and ATT&CK are registered trademarks of The MITRE Corporation. Glexia is not affiliated with or endorsed by MITRE.

Official MITRE ATT&CK siteOfficial STIX data repositoryMITRE ATT&CK terms of use