High · CVSS 7.8
In the Linux kernel, the following vulnerability has been resolved:
ring-buffer: Fix subbuf resize race with ring_buffer_alloc_read_page()
ring_buffer_alloc_read_page() is racy with ring_buffer_subbuf_order_set,
it can allocate a reader page with an outdated order. This isn't a big
issue, the user can still re-allocate a new reader page and try again.
However, what is more problematic is if the value of subbuf_order
changes in the middle of ring_buffer_alloc_read_page(). In that case,
bpage->order might not match the actual allocated memory.
Use bpage->order for the allocation to prevent this race.
Published Sep 11, 2026 · Updated Oct 19, 2026
Unknown · CVSS Not scored
In the Linux kernel, the following vulnerability has been resolved:
ring-buffer: Free cpu_buffer::free_page with subbuf_order
When sub-buffers use an order greater than 0, cpu_buffer->free_page is
allocated with subbuf_order. Use the correct order for
cpu_buffer->free_page.
Published Sep 11, 2026 · Updated Oct 19, 2026
High · CVSS 7.8
In the Linux kernel, the following vulnerability has been resolved:
ring-buffer: Hold cpu_buffer::lock when resizing a subbuf
Because, ring_buffer_subbuf_order_set() can clear cpu_buffer->free_page,
hold cpu_buffer->lock to prevent races with
ring_buffer_alloc_read_page() and ring_buffer_free_read_page().
Published Sep 11, 2026 · Updated Oct 19, 2026
High · CVSS 7.8
In the Linux kernel, the following vulnerability has been resolved:
ring-buffer: Make cpu_buffer::free_page a buffer_data_read_page
Discarding a cached reader page after a concurrent ring buffer resize
uses the new global subbuf_order for the free_pages() call. This
mismatched order may crashes the kernel or leaks memory because the cached
page was allocated under the old size.
Save the actual free_page order alongside the page address to ensure we
always refer to the correct value and do not rely on the potentially
stalled cpu_buffer->subbuf_order value. The simplest is to make
free_page a buffer_data_read_page which already covers exactly what we
need: a page address and a page order.
Published Sep 11, 2026 · Updated Oct 19, 2026
High · CVSS 7.8
In the Linux kernel, the following vulnerability has been resolved:
ring-buffer: Stop remote reader update when page swap fails
The remote swap_reader_page callback can return -EBUSY when the writer
moves the head before the remote catches it, particularly during an event
storm on a small buffer. __rb_get_reader_page_from_remote() currently
warns about that failure but continues with the unchanged reader ID and
rearranges the local page list as though the swap succeeded.
Handle the callback failure as a recoverable error. Report it with
pr_warn_ratelimited() and return NULL. Callers already handle a NULL reader
page as a failed attempt. This avoids splicing the same page as both the
previous and new reader without flooding the log under contention.
Published Sep 11, 2026 · Updated Oct 19, 2026
Unknown · CVSS Not scored
In the Linux kernel, the following vulnerability has been resolved:
orangefs: fix double-free of trailer_buf on readdir copy failure
On a readdir downcall, orangefs_devreq_write_iter() frees
op->downcall.trailer_buf with vfree() when copy_from_iter_full() fails,
but does not clear the pointer before goto Efault. The waiter in
do_readdir() is then woken with a negative status and frees the same
pointer again on its r < 0 path, causing a deterministic double-free.
A client holding /dev/pvfs2-req triggers it by sending a readdir
downcall whose declared trailer_size exceeds the bytes it supplies.
Clear the pointer after freeing so the readdir-side vfree() becomes a
no-op.
Published Sep 11, 2026 · Updated Oct 19, 2026
High · CVSS 7.8
In the Linux kernel, the following vulnerability has been resolved:
orangefs: skip leading spaces before parsing client debug masks
orangefs_prepare_cdm_array() sizes each client debug keyword buffer
with strcspn(cds_head, " "), but then parses the keyword with %s. The
%s conversion skips leading whitespace, while strcspn() does not.
If a client debug entry starts with a space, the allocation can be sized
for an empty keyword while sscanf() copies the following non-empty token.
This can write past the end of the allocated keyword buffer.
Skip leading spaces before computing the keyword length so the allocation
matches the string parsed by sscanf().
Published Sep 11, 2026 · Updated Oct 19, 2026
Unknown · CVSS Not scored
In the Linux kernel, the following vulnerability has been resolved:
ocfs2: always run deallocs on copy-on-write completion
Local fuzzing of 6.12.94 has found the following memory leak
caused by doing 'copy_file_range()' within the same filesystem:
unreferenced object 0xffff88812192c980 (size 32):
comm "syz.0.49", pid 12095, jiffies 4294964143
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 08 00 00 00 00 00 00 00 ................
c0 c5 92 21 81 88 ff ff 00 02 00 00 00 06 00 00 ...!............
backtrace (crc 7068d63f):
kmemleak_alloc_recursive include/linux/kmemleak.h:42 [inline]
slab_post_alloc_hook mm/slub.c:4152 [inline]
slab_alloc_node mm/slub.c:4197 [inline]
__kmalloc_cache_noprof+0x168/0x2c0 mm/slub.c:4358
kmalloc_noprof include/linux/slab.h:878 [inline]
ocfs2_find_per_slot_free_list fs/ocfs2/alloc.c:6618 [inline]
ocfs2_cache_block_dealloc+0x155/0x4b0 fs/ocfs2/alloc.c:6786
ocfs2_cache_extent_block_free fs/ocfs2/alloc.c:6819 [inline]
ocfs2_unlink_path+0x286/0x450 fs/ocfs2/alloc.c:2613
ocfs2_rotate_subtree_left fs/ocfs2/alloc.c:2779 [inline]
__ocfs2_rotate_tree_left+0x1f6f/0x2da0 fs/ocfs2/alloc.c:2985
ocfs2_rotate_tree_left+0x283/0xe00 fs/ocfs2/alloc.c:3237
ocfs2_try_to_merge_extent+0xf56/0x1a20 fs/ocfs2/alloc.c:3825
ocfs2_split_extent+0x15f4/0x2940 fs/ocfs2/alloc.c:5138
ocfs2_clear_ext_refcount+0x2f6/0x550 fs/ocfs2/refcounttree.c:3098
ocfs2_replace_clusters fs/ocfs2/refcounttree.c:3131 [inline]
ocfs2_make_clusters_writable fs/ocfs2/refcounttree.c:3255 [inline]
ocfs2_replace_cow+0x991/0x1660 fs/ocfs2/refcounttree.c:3349
ocfs2_refcount_cow_hunk fs/ocfs2/refcounttree.c:3427 [inline]
ocfs2_refcount_cow+0x5e1/0x9f0 fs/ocfs2/refcounttree.c:3470
ocfs2_prepare_inode_for_write fs/ocfs2/file.c:2340 [inline]
ocfs2_file_write_iter+0xbda/0x1880 fs/ocfs2/file.c:2451
iter_file_splice_write+0x890/0xf60 fs/splice.c:743
do_splice_from fs/splice.c:944 [inline]
direct_splice_actor+0x232/0x480 fs/splice.c:1167
splice_direct_to_actor+0x4b4/0xb60 fs/splice.c:1111
do_splice_direct_actor fs/splice.c:1210 [inline]
do_splice_direct+0x10f/0x1c0 fs/splice.c:1236
do_sendfile+0x430/0xbf0 fs/read_write.c:1388
unreferenced object 0xffff88812192c5c0 (size 32):
comm "syz.0.49", pid 12095, jiffies 4294964143
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
29 70 00 00 00 00 00 00 19 00 00 00 00 00 00 00 )p..............
backtrace (crc afec850f):
kmemleak_alloc_recursive include/linux/kmemleak.h:42 [inline]
slab_post_alloc_hook mm/slub.c:4152 [inline]
slab_alloc_node mm/slub.c:4197 [inline]
__kmalloc_cache_noprof+0x168/0x2c0 mm/slub.c:4358
kmalloc_noprof include/linux/slab.h:878 [inline]
kzalloc_noprof include/linux/slab.h:1014 [inline]
ocfs2_cache_block_dealloc+0x25c/0x4b0 fs/ocfs2/alloc.c:6793
ocfs2_cache_extent_block_free fs/ocfs2/alloc.c:6819 [inline]
ocfs2_unlink_path+0x286/0x450 fs/ocfs2/alloc.c:2613
ocfs2_rotate_subtree_left fs/ocfs2/alloc.c:2779 [inline]
__ocfs2_rotate_tree_left+0x1f6f/0x2da0 fs/ocfs2/alloc.c:2985
ocfs2_rotate_tree_left+0x283/0xe00 fs/ocfs2/alloc.c:3237
ocfs2_try_to_merge_extent+0xf56/0x1a20 fs/ocfs2/alloc.c:3825
ocfs2_split_extent+0x15f4/0x2940 fs/ocfs2/alloc.c:5138
ocfs2_clear_ext_refcount+0x2f6/0x550 fs/ocfs2/refcounttree.c:3098
ocfs2_replace_clusters fs/ocfs2/refcounttree.c:3131 [inline]
ocfs2_make_clusters_writable fs/ocfs2/refcounttree.c:3255 [inline]
ocfs2_replace_cow+0x991/0x1660 fs/ocfs2/refcounttree.c:3349
ocfs2_refcount_cow_hunk fs/ocfs2/refcounttree.c:3427 [inline]
ocfs2_refcount_cow+0x5e1/0x9f0 fs/ocfs2/refcounttree.c:3470
ocfs2_prepare_inode_for_write fs/ocfs2/file.c:2340 [inline]
ocfs2_file_write_iter+0xbda/0x1880 fs/ocfs2/file.c:2451
iter_file_splice_write+0x890/0xf60 fs/splice.c:743
do_splice_from fs/splice.c:9
---truncated---
Published Sep 11, 2026 · Updated Oct 19, 2026
Critical · CVSS 9.8
In the Linux kernel, the following vulnerability has been resolved:
ocfs2: bound namelen in dlm_migrate_request_handler
Patch series "ocfs2/dlm: bound peer-controlled lengths in the o2dlm".
The o2dlm receive handlers trust u8 length and count fields from the wire
without bounding them, so a node in a DLM domain can corrupt or panic any
other node with a malformed message. Three defects:
- dlm_migrate_request_handler() passes migrate->namelen unchecked to
dlm_init_mle(), which memcpy()s it into the 32-byte mname[] of an
o2dlm_mle slab object: a heap out-of-bounds write of up to ~215
attacker-controlled bytes.
- dlm_mig_lockres_handler() passes mres->lockname_len unchecked to
dlm_init_lockres(), which memcpy()s it into the 32-byte o2dlm_lockname
slab object: a heap out-of-bounds write of up to ~223 bytes.
- the same handler trusts mres->num_locks without checking that the
message is large enough to hold that many entries, so
dlm_process_recovery_data() walks mres->ml[] past the kmalloc(data_len)
copy and trips a BUG_ON (an out-of-bounds read ending in a panic).
The other o2dlm receive handlers already reject an oversized name; the
migration and recovery handlers have omitted it since the DLM was added
(see the Fixes tags). Patch 1 bounds namelen; patch 2 validates
lockname_len, num_locks, and the payload size. Conforming recovery and
migration traffic is unaffected.
o2net authenticates peers only by the DLM domain key, so any node that has
joined the domain -- including a compromised or malicious member -- can
send these messages. There is no local trigger; the attacker must already
be a member of the cluster.
Each sink was confirmed under KASAN with an out-of-tree module mirroring
it exactly -- a kmem_cache/kmalloc of the real destination size, then the
same unclamped memcpy/loop: slab-out-of-bounds Write for the two writes,
Read for the recovery walk, and a panic. A userspace AddressSanitizer
build faults identically under -m32 and -m64. Scrubbed logs are available
on request.
I reported this privately to security@kernel.org and the ocfs2 maintainers
on 2026-06-20; with no response after the standard embargo period I am
posting the fix publicly. I have no embargo requirement.
This patch (of 2):
A node receiving a DLM_MIGRATE_REQUEST message trusts the peer-supplied
name length (migrate->namelen) without bounding it. dlm_init_mle() then
copies that many bytes into the fixed DLM_LOCKID_NAME_MAX-byte mname[]
array of an o2dlm_mle slab object, so a malformed message from a cluster
peer overflows the slab object by up to ~215 bytes: a heap out-of-bounds
write of attacker-controlled data, reachable by any node in the domain.
Reject an oversized name, the way dlm_master_request_handler() and the
other o2dlm receive handlers already do; the migration handler omits the
check entirely. Conforming messages are unaffected.
Published Sep 11, 2026 · Updated Oct 19, 2026
Critical · CVSS 9.8
In the Linux kernel, the following vulnerability has been resolved:
ocfs2: validate lengths in dlm_mig_lockres_handler
A node receiving a DLM_MIG_LOCKRES message trusts several fields of the
peer-supplied dlm_migratable_lockres without validation. num_locks and
lockname_len are bounded only on the sending side, and the message is
never checked to actually carry num_locks migratable_lock entries. As a
result dlm_process_recovery_data() walks mres->ml[0..num_locks) past the
kmalloc(data_len) copy of the message (an out-of-bounds read that ends in
a BUG_ON panic), and dlm_init_lockres() copies lockname_len bytes into the
fixed 32-byte o2dlm_lockname slab object (a heap out-of-bounds write).
Both are reachable by any node in the domain.
Validate these fields right after dlm_grab(), before anything uses them --
including the not-joined error path, which already prints mres->lockname
with the unbounded lockname_len as a %.*s precision. Reject the message
unless lockname_len <= DLM_LOCKID_NAME_MAX, num_locks <=
DLM_MAX_MIGRATABLE_LOCKS (the bound the sender already asserts), and the
payload is large enough to hold the claimed locks. Conforming recovery
and migration messages are unaffected.
Published Sep 11, 2026 · Updated Oct 19, 2026
High · CVSS 8.8
In the Linux kernel, the following vulnerability has been resolved:
ocfs2: validate rl_used against rl_count in refcount block validator
ocfs2_find_refcount_rec_in_rl() walks the on-disk refcount record array
with:
for (; i < le16_to_cpu(rb->rf_records.rl_used); i++) {
rec = &rb->rf_records.rl_recs[i];
...
rl_recs[] lives in a single metadata block (4096 bytes on the common
configuration), so its real capacity is fixed by
ocfs2_refcount_recs_per_rb(sb) (247 records for a 4K block with the
16-byte ocfs2_refcount_rec). rl_used and rl_count are both read directly
off disk by ocfs2_validate_refcount_block() and are never checked against
that capacity, nor against each other, before any refcount/reflink/CoW
operation walks the array.
A crafted (or corrupted) refcount block with rl_used == 0xffff makes the
loop above walk far past the end of the block, dereferencing rl_recs[i]
for i up to 65534. The resulting index is then handed to the sibling
ocfs2_insert_refcount_rec(), whose insert-shift does:
if (index < le16_to_cpu(rf_list->rl_used))
memmove(&rf_list->rl_recs[index + 1],
&rf_list->rl_recs[index],
(le16_to_cpu(rf_list->rl_used) - index) *
sizeof(struct ocfs2_refcount_rec));
i.e. a memmove() of up to (0xffff - index) * 16 bytes (~1 MiB) from an
offset already past the block. This is reachable from an ordinary reflink
(FICLONE) against a crafted/corrupted ocfs2 image: attaching an extent
whose cpos sorts past every real record in the leaf forces the lookup to
run off the end instead of returning early on a match. The attacker model
is local: CAP_SYS_ADMIN mounting a crafted or corrupted ocfs2 image, or a
raw write to the block device backing an already-mounted ocfs2 filesystem.
ocfs2_validate_refcount_block() already validates the block's ECC,
signature, rf_blkno and rf_fs_generation, but never rl_count/rl_used
against the block's actual on-disk capacity. This is the same class of
gap that ocfs2_validate_extent_block() (fs/ocfs2/alloc.c) already closes
for the sibling extent-list header, which checks both the record capacity
and the "used" bound before any code walks h_list.l_recs[]:
if (le16_to_cpu(eb->h_list.l_count) != ocfs2_extent_recs_per_eb(sb)) {
rc = ocfs2_error(...);
goto bail;
}
if (le16_to_cpu(eb->h_list.l_next_free_rec) >
le16_to_cpu(eb->h_list.l_count)) {
rc = ocfs2_error(...);
goto bail;
}
Add the equivalent pair of checks to ocfs2_validate_refcount_block():
reject a refcount block whose rl_count does not match the fixed per-block
capacity returned by ocfs2_refcount_recs_per_rb(), and reject rl_used >
rl_count. Both checks are skipped when OCFS2_REFCOUNT_TREE_FL is set,
because in that case the same union bytes hold an ocfs2_extent_list
(rf_list), not the refcount record list (rf_records) -- that layout is
already validated separately by ocfs2_validate_extent_block() when the
referenced extent block is read. This mirrors the existing
"!(rb->rf_flags & OCFS2_REFCOUNT_TREE_FL)" guard used elsewhere in this
file (e.g. ocfs2_get_refcount_rec()) to decide whether rf_records or
rf_list is the live member of the union.
With this in place, a forged rl_used/rl_count is caught at block
validation time (ocfs2_error()), consistent with every other corruption
check in this function, instead of driving an out-of-bounds read in
ocfs2_find_refcount_rec_in_rl() and a subsequent out-of-bounds memmove()
in ocfs2_insert_refcount_rec().
Verified against a crafted image on a v6.19 KASAN (KASAN_GENERIC) build:
replaying the same reflink (FICLONE) reliably hit a KASAN report in
__ocfs2_increase_refcount()/ocfs2_insert_refcount_rec() before this patch,
and triggers no report once ocfs2_validate_refcount_block() rejects the
forged rl_used/rl_count.
Published Sep 11, 2026 · Updated Oct 19, 2026
Critical · CVSS 9.8
In the Linux kernel, the following vulnerability has been resolved:
ocfs2: validate directory-index entry counts when reading metadata
ocfs2_validate_dx_leaf() and ocfs2_validate_dx_root() check the ECC and
signature of an indexed-directory block before it reaches higher-level
callers, but neither validator bounds the ocfs2_dx_entry_list counts
against the capacity of the block that holds them.
ocfs2_dx_dir_search() then walks
for (i = 0; i < le16_to_cpu(entry_list->de_num_used); i++)
dx_entry = &entry_list->de_entries[i];
over de_num_used entries with no bounds check. entry_list is either
dx_leaf->dl_list (from ocfs2_read_dx_leaf) or, for an inline root,
dx_root->dr_entries. A crafted on-disk image can set de_num_used (and
de_count, which is the __counted_by_le() bound of de_entries) to 0xffff
and make the walk read far past the end of the 4KB metadata block, giving
a slab out-of-bounds read reachable from any path lookup, stat() or open()
on an indexed directory once the image is mounted.
Commit 775c17386a6f ("ocfs2: validate dx_root extent list fields during
block read") already bounds dr_list for the non-inline dx_root, but left
the inline dr_entries path and the dx_leaf dl_list unchecked. Add the
same read-time validation for both entry lists: de_count must equal the
capacity of the block (ocfs2_dx_entries_per_leaf()/per_root()) and
de_num_used must not exceed de_count, rejecting corrupted metadata with
-EFSCORRUPTED before ocfs2_dx_dir_search() can walk an out-of-range entry
array.
de_count is always written as exactly the block capacity when a leaf or
inline root is formatted, so the equality check does not reject any valid
image.
Found by 0sec automated security-research tooling (https://0sec.ai).
Published Sep 11, 2026 · Updated Oct 19, 2026
Unknown · CVSS Not scored
In the Linux kernel, the following vulnerability has been resolved:
ocfs2: cluster: don't sleep while holding o2hb_live_lock in o2hb_region_pin()
Patch series "ocfs2: cluster: o2hb_region_pin() fixes", v2.
This series fixes three related issues in o2hb_region_pin(), all are from
the original implementation in commit: 58a3158a5d17 ("ocfs2/cluster:
Pin/unpin o2hb regions"):
1) It is called with o2hb_live_lock (a spinlock) held, but the
underlying configfs_depend_item() sleeps (takes inode rwsem and
pins the filesystem). This triggers BUG under
CONFIG_DEBUG_ATOMIC_SLEEP.
2) When called from the configfs drop_item callback, it creates a
lock order inversion: parent inode_lock -> configfs root
inode_lock, which can deadlock against subsystem unregistration
paths taking root -> parent.
3) If pinning fails partway through o2hb_region_inc_user(), the
o2hb_dependent_users counter is leaked and partially-pinned
regions are never released, leaving heartbeat regions
unprotected on subsequent mounts.
Patch 1 reworks o2hb_region_pin() to drop o2hb_live_lock across each
sleeping configfs_depend_item() call, using a config_item reference to
keep the region alive while unlocked.
Patch 2 adds a from_callback parameter to select
configfs_depend_item_unlocked() when called from configfs context,
avoiding the inode_lock nesting.
Patch 3 fixes the error path in o2hb_region_inc_user() to unpin and
decrement the counter on failure.
This patch (of 3):
o2hb_region_pin() is always called with the o2hb_live_lock spinlock held
(from o2hb_region_inc_user() and o2hb_heartbeat_group_drop_item()), but it
calls o2nm_depend_item() -> configfs_depend_item(), which sleeps: it pins
the configfs filesystem and takes the configfs root inode rwsem. Under
CONFIG_DEBUG_ATOMIC_SLEEP this triggers:
BUG: sleeping function called from invalid context at kernel/locking/rwsem.c
in_atomic(): 1, ... name: mount.ocfs2
down_write
configfs_depend_item
o2hb_region_pin
o2hb_region_inc_user
o2hb_register_callback
dlm_register_domain_handlers
...
ocfs2_dlm_init
ocfs2_mount_volume
ocfs2_fill_super
Rework o2hb_region_pin() to pin one region at a time with the lock dropped
across the sleeping call: under o2hb_live_lock find the next eligible
region and take a config_item reference to keep it alive, drop the lock,
call o2nm_depend_item(), then retake the lock and record the pin. The
config_item_put() is done with the lock released as well, since
o2hb_region_release() also acquires o2hb_live_lock and can sleep. The
region list may change while unlocked, so the scan restarts from the top
after each pin. Local heartbeat still pins only the matching region;
global heartbeat pins all eligible regions.
The unpin path is unaffected: configfs_undepend_item() only takes a
spinlock and does not sleep.
Published Sep 11, 2026 · Updated Oct 19, 2026
Unknown · CVSS Not scored
In the Linux kernel, the following vulnerability has been resolved:
ocfs2: fix readdir position truncation on 32-bit kernels
In ocfs2_dir_foreach_blk_el(), the directory cookie position is
rebuilt with
ctx->pos = (ctx->pos & ~(sb->s_blocksize - 1)) | offset;
`ctx->pos` is loff_t (signed 64-bit), while `sb->s_blocksize` is
unsigned long. On 32-bit kernels unsigned long is 32-bit, so the mask
~(sb->s_blocksize - 1)
is computed as a 32-bit unsigned value (e.g. 0xfffff000 for a 4 KiB
block size). In the AND expression with the 64-bit `ctx->pos`, that
unsigned operand is zero-extended to 64 bits per the usual arithmetic
conversions, yielding 0x00000000fffff000. The high 32 bits of
`ctx->pos` are silently cleared, even though directory size is
allowed to exceed 4 GiB.
When readdir() crosses the 4 GiB boundary on a 32-bit kernel the
position is reset back into the first 4 GiB block, making the
re-validation path re-enumerate already-returned dirents indefinitely.
This is ocfs2_dir_foreach_blk_el(), the extent-list readdir path taken
for all non-inline directories, so a directory large enough to cross
4 GiB reaches it.
This is the same class of bug that commit 3dce5bb82c97 ("exfat: Fix
bitwise operation having different size") fixed in exfat, and the
fix mirrors the equivalent ext4 fix in this series. Cast the operand
to loff_t so the mask is 64-bit before the AND:
ctx->pos = (ctx->pos & ~((loff_t)sb->s_blocksize - 1)) | offset;
64-bit kernels are unaffected.
Published Sep 11, 2026 · Updated Oct 19, 2026
High · CVSS 7.8
In the Linux kernel, the following vulnerability has been resolved:
openrisc: fix arbitrary kernel memory access via or1k_atomic syscall
sys_or1k_atomic() (syscall 244 in the "or1k" ABI) takes two user
pointers, v1 and v2, and swaps the words they point to in hand-written
assembly.
l.lwz r29,0(r4)
l.lwz r27,0(r5)
l.sw 0(r4),r27
l.sw 0(r5),r29
The pointers are not checked with access_ok(). The four memory
accesses also have no exception table entries.
A caller passes a kernel address as either pointer, and the syscall
reads from and writes to it directly.
This gives an unprivileged process a kernel read/write primitive. It
overwrites kernel data such as the sys_call_table, gaining code
execution in kernel context.
Check both pointers before entering the critical section. Add fixups
for the four memory accesses so faults on valid but unmapped user
addresses return -EFAULT.
[shorne@gmail.com: fix comment style]
Published Sep 11, 2026 · Updated Oct 19, 2026
High · CVSS 7.8
In the Linux kernel, the following vulnerability has been resolved:
openvswitch: Fix CT limit teardown use-after-free
Packet processing uses CT limit state under RCU, while netns teardown
frees that state under ovs_mutex. The CT limit pointer was neither removed
from readers nor protected by a grace period, allowing packet processing to
dereference the freed state.
An unprivileged user can trigger this bug from a user and network
namespace, causing a slab-use-after-free in ovs_ct_execute() when the
netns is torn down.
Publish the CT limit pointer through RCU, remove it before teardown, and
wait for readers before freeing its contents. Keep ovs_mutex around
individual CT limit updates, and use the RCU read-side lock while GET
traverses the RCU-protected limit lists.
Netns teardown detaches the RCU-protected CT limit state in the pernet
.pre_exit callback while holding ovs_mutex. The pernet core guarantees an
RCU grace period between the .pre_exit and .exit callbacks, so the .exit
callback completes the teardown without adding any extra synchronization.
The netlink command handlers do not need NULL checks because the userspace
netlink socket holds an active reference to its network namespace while a
request is processed. The per-netns exit path therefore cannot run
concurrently with SET, DEL, or GET for that socket's namespace.
Published Sep 11, 2026 · Updated Oct 19, 2026
High · CVSS 7.8
In the Linux kernel, the following vulnerability has been resolved:
openvswitch: only skb_tx_error() a packet we are about to drop
queue_userspace_packet() borrows the packet skb -- it only copies it into
a private netlink message (user_skb) and does not own it; on return
do_execute_actions() keeps forwarding it through the flow's remaining
actions. Its error path nevertheless calls skb_tx_error(skb), which via
skb_zcopy_clear() does skb_shinfo(skb)->flags &= ~SKBFL_ALL_ZEROCOPY,
stripping SKBFL_SHARED_FRAG from that live skb (skb_tx_error()'s kerneldoc
says "skb must be freed afterwards").
For a MSG_ZEROCOPY skb carrying page-cache frags, SKBFL_SHARED_FRAG is
what makes esp_input() skb_cow_data() before in-place AEAD; once it is
stripped a later local ESP-in-UDP delivery decrypts in place over pages
the sender does not own -- an unprivileged page-cache write (the
"Fragnesia" primitive).
do_execute_actions() ignores output_userspace()'s return value, so any
action after a failed USERSPACE upcall inherits the stripped skb.
Move the skb_tx_error() to the flow-miss drop path - the "default"
branch of ovs_dp_process_packet()'s switch(error), before kfree_skb().
The call has been here since commit 36d5fe6a0007 ("core, nfqueue,
openvswitch: Orphan frags in skb_zerocopy and handle errors") but was
harmless until esp_input() began relying on SKBFL_SHARED_FRAG to gate
in-place decrypt; only then did stripping it on a still-forwarded skb
become a page-cache write primitive.
Published Sep 11, 2026 · Updated Oct 19, 2026
High · CVSS 7.8
In the Linux kernel, the following vulnerability has been resolved:
ipmi: Fix use-after-free of cmd_rcvr in _ipmi_destroy_user()
Commit 9e91f8a6c868 ("ipmi:msghandler: Remove srcu for the
ipmi_interfaces list") dropped the synchronize_rcu() between unlinking
the command receivers from intf->cmd_rcvrs and freeing them, updating
only the comment that explains why the barrier is needed.
The cmd_rcvrs list is still traversed under plain RCU: find_cmd_rcvr()
walks it inside rcu_read_lock(), and handle_ipmb_get_msg_cmd() borrows
rcvr->user from that lookup within the same read-side section. Without
the grace period, _ipmi_destroy_user() can kfree() a cmd_rcvr while a
reader still holds a pointer to it, causing a use-after-free.
The rework only made srcu unnecessary for the interfaces list; the
cmd_rcvrs list still relies on plain RCU. Restore the synchronize_rcu()
before freeing the receivers.
Published Sep 11, 2026 · Updated Oct 19, 2026
Critical · CVSS 9.8
In the Linux kernel, the following vulnerability has been resolved:
lockd: pin next file across nlm_inspect_file lock-drop
nlm_traverse_files() pins the current file with f_count++ across
a mutex_unlock for nlm_inspect_file(), but nothing pins the saved
next pointer. A concurrent nlm_release_file() can kfree the next
file during the unlock window, and the iterator dereferences freed
memory on the next loop step.
Pin both current and next before the lock-drop. Advance by
swapping the pinned cursors at the end of each iteration so next
is always held alive across the unlock.
Always call nlm_file_release() after dropping the iteration pin,
regardless of whether the file matched the predicate. Use
nlm_file_inuse(), which does a live walk of the inode lock list,
rather than the cached f_locks field, so skipped files that never
ran nlm_inspect_file() are evaluated correctly.
Because every file in a hash bucket is now pinned and released,
files skipped by the is_failover_file predicate that have no
locks, blocks, shares, or external references are deleted during
traversal. The old code never evaluated skipped files for
cleanup. The new behavior is intentional: such files are stale
and should not persist in the table.
Published Sep 11, 2026 · Updated Oct 19, 2026
Unknown · CVSS Not scored
In the Linux kernel, the following vulnerability has been resolved:
lockd: fix NULL dereference on lockowner allocation failure
nlmclnt_locks_init_private() installs NLM file lock operations even when
nlmclnt_find_lockowner() fails to allocate a lockowner. nlmclnt_proc()
then returns -ENOMEM, but the VFS still tears down the partially
initialized file_lock and calls locks_release_private().
That invokes nlmclnt_locks_release_private(), which dereferences
fl->fl_u.nfs_fl.owner and crashes because the owner was never installed.
Clear fl_ops before attempting to initialize the NLM private state, and
install the NLM lock operations only after a lockowner has been allocated
successfully.
Published Sep 11, 2026 · Updated Oct 19, 2026
High · CVSS 7.5
In the Linux kernel, the following vulnerability has been resolved:
nvme: zero the discard fallback page
nvme_setup_discard() always maps sizeof(struct nvme_dsm_range) *
NVME_DSM_MAX_RANGES = 4096 bytes as the DSM payload however many ranges
the command declares, because some devices ignore the 'Number of Ranges'
field - the Fixes: commit records two that read past the declared ranges.
A single-range discard fills only the first 16 bytes.
Normally the buffer comes from kzalloc() and the other 4080 bytes are
zero. When that allocation fails the code falls back to the
per-controller ctrl->discard_page, which nvme_init_ctrl() obtains with
alloc_page(GFP_KERNEL) and nothing ever zeroes, so those 4080 bytes are
whatever the page last held and are handed to the controller. Reaching
it requires the kzalloc(GFP_ATOMIC | __GFP_NOWARN) to fail, that is
memory pressure; it is not remotely triggerable. Failing the allocation
under KMSAN reproduces it, with the leaked tail full of vmemmap struct
page pointers. The extent in the report is a partial transfer of the
payload, not the whole 4096 bytes; the 16-byte boundary in it is the one
declared range:
[ 11.991601] BUG: KMSAN: uninit-value in dma_map_phys+0x14c8/0x1900
[ 11.991969] dma_map_phys+0x14c8/0x1900
[ 11.992220] dma_map_page_attrs+0xcf/0x130
[ 11.992485] e1000_xmit_frame+0x4099/0x6d10
[ 11.992768] dev_hard_start_xmit+0x22f/0xa80
[ 11.993068] sch_direct_xmit+0x35c/0xcb0
[ 11.993315] __dev_queue_xmit+0x1ee5/0x5eb0
[ 11.993608] ip_finish_output2+0x1903/0x1c30
[ 11.993881] ip_finish_output+0x288/0x870
[ 11.994125] ip_output+0x15e/0x400
[ 11.994365] __ip_queue_xmit+0x1e85/0x1fb0
[ 11.994639] ip_queue_xmit+0x60/0x80
[ 11.994899] __tcp_transmit_skb+0x4e71/0x5fa0
[ 11.995210] tcp_write_xmit+0x3a36/0x9160
[ 11.995533] __tcp_push_pending_frames+0xc5/0x3c0
[ 11.995854] tcp_push+0x7dc/0x840
[ 11.996076] tcp_sendmsg_locked+0x766c/0x8400
[ 11.996371] tcp_sendmsg+0x4b/0x90
[ 11.996572] inet_sendmsg+0x134/0x2a0
[ 11.996823] __sock_sendmsg+0x265/0x360
[ 11.997076] sock_sendmsg+0x100/0x1e0
[ 11.997293] nvme_tcp_try_send+0x196f/0x6370
[ 11.997605] nvme_tcp_queue_rq+0x1d54/0x20b0
[ 11.997882] blk_mq_dispatch_rq_list+0x5ee/0x2e50
[ 11.998175] __blk_mq_sched_dispatch_requests+0x16dc/0x24a0
[ 11.998539] blk_mq_sched_dispatch_requests+0x11b/0x2c0
[ 11.998865] blk_mq_run_work_fn+0x13b/0x280
[ 11.999146] process_scheduled_works+0x966/0x1ad0
[ 11.999465] worker_thread+0xe44/0x1480
[ 11.999709] kthread+0x53b/0x600
[ 11.999927] ret_from_fork+0x29f/0x7c0
[ 12.000191] ret_from_fork_asm+0x1a/0x30
[ 12.000460]
[ 12.000558] Uninit was created at:
[ 12.000788] __alloc_frozen_pages_noprof+0x8bf/0xd30
[ 12.001096] alloc_pages_mpol+0x1d0/0x5f0
[ 12.001326] alloc_pages_noprof+0x102/0x290
[ 12.001627] nvme_init_ctrl+0x5a3/0x9f0
[ 12.001891] nvme_tcp_create_ctrl+0xd75/0x19b0
[ 12.002170] nvmf_dev_write+0x4c68/0x4fd0
[ 12.002426] vfs_write+0x587/0x1a10
[ 12.002636] __x64_sys_write+0x207/0x4f0
[ 12.002874] x64_sys_call+0x2ff0/0x3ea0
[ 12.003123] do_syscall_64+0x147/0x3b0
[ 12.003400] entry_SYSCALL_64_after_hwframe+0x77/0x7f
[ 12.003680]
[ 12.003777] Bytes 16-2843 of 2844 are uninitialized
[ 12.004068] Memory access of size 2844 starts at ffff888109f82000
[ 12.004412]
[ 12.004530] CPU: 0 UID: 0 PID: 101 Comm: kworker/0:1H Not tainted 7.2.0-rc5-NVMECTL-gf5098b6bae76 #1 PREEMPT(lazy)
[ 12.005127] Hardware name: QEMU Ubuntu 24.04 PC v2 (i440FX + PIIX, arch_caps fix, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
[ 12.005762] Workqueue: kblockd blk_mq_run_work_fn
[ 12.006073] =====================================================
Allocate the page with __GFP_ZERO. The single allocation site covers
every use of it: bytes no discard has written stay zero, and bytes one
did write hold that controller's own range list, which it has already
been sent.
Published Sep 11, 2026 · Updated Oct 19, 2026
Critical · CVSS 9.8
In the Linux kernel, the following vulnerability has been resolved:
nvme-tcp: do not accept C2HData based on blk_rq_payload_bytes() alone
Commit 25e5cb780e62 ("nvme-tcp: fix possible crash in write_zeroes
processing") established that blk_rq_payload_bytes() must not be read
without first checking blk_rq_nr_phys_segments(), and recorded the
result in nvme_tcp_setup_cmd_pdu() as req->data_len. The receive side
was left as it was.
The two differ for REQ_OP_WRITE_ZEROES, which has no physical segments
but a non-zero blk_rq_bytes(), so setup leaves req->iter untouched
while the receive gate lets a C2HData through and nvme_tcp_recv_data()
copies into whatever the previous command on that tag left there. The
driver-private area is zeroed only when the tag set is allocated.
Reproduced with a test target that leaves a residual iterator on a tag
and then sends a C2HData for a WRITE_ZEROES command on the same tag:
BUG: KASAN: wild-memory-access in _copy_to_iter+0x642/0x1330
Write of size 512 at addr ffe728c2175dfa81 by task kworker/0:1H/103
CPU: 0 UID: 0 PID: 103 Comm: kworker/0:1H Not tainted 7.2.0-rc5-NVMETCP-gf5098b6bae76 #1 PREEMPT(lazy)
Hardware name: QEMU Ubuntu 24.04 PC v2 (i440FX + PIIX, arch_caps fix, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
Workqueue: nvme_tcp_wq nvme_tcp_io_work
Call Trace:
<TASK>
dump_stack_lvl+0x53/0x70
kasan_report+0xce/0x100
? _copy_to_iter+0x642/0x1330
kasan_check_range+0x105/0x1b0
__asan_memcpy+0x3c/0x60
_copy_to_iter+0x642/0x1330
? __pfx_sock_has_perm+0x10/0x10
? worker_thread+0x45b/0xd10
? __pfx__copy_to_iter+0x10/0x10
? _raw_spin_lock_bh+0x83/0xe0
? __pfx__raw_spin_lock_bh+0x10/0x10
__skb_datagram_iter+0xf3/0x820
? __pfx_simple_copy_to_iter+0x10/0x10
? __asan_memcpy+0x3c/0x60
? skb_copy_bits+0x58d/0x830
skb_copy_datagram_iter+0x37/0x120
nvme_tcp_recv_skb+0xa07/0x4320
? __pfx_nvme_tcp_recv_skb+0x10/0x10
__tcp_read_sock+0x1ab/0x810
? __pfx_nvme_tcp_recv_skb+0x10/0x10
? __pfx_lock_sock_nested+0x10/0x10
? __pfx___tcp_read_sock+0x10/0x10
nvme_tcp_try_recv+0x152/0x1e0
? __pfx_nvme_tcp_try_recv+0x10/0x10
? __pfx_mutex_unlock+0x10/0x10
nvme_tcp_io_work+0x1e4/0x6c0
? __schedule+0x181a/0x49f0
? __pfx_nvme_tcp_io_work+0x10/0x10
process_one_work+0x633/0x1030
Keep the blk_rq_payload_bytes() test and add req->data_len to it. The
old test is what rejects a C2HData naming a tag that is no longer in
flight, because blk_update_request() zeroes rq->__data_len on
completion; req->data_len and req->curr_bio are driver-private and
survive completion, so they cannot stand in for it. Setup initialises
the iterator only when both req->curr_bio and req->data_len are set, so
the gate now tests the same two.
Published Sep 11, 2026 · Updated Oct 19, 2026
High · CVSS 7.5
In the Linux kernel, the following vulnerability has been resolved:
nvme-tcp: fix host memory disclosure on R2T for a read command
nvme_tcp_handle_r2t() does not check the direction of the request the
R2T refers to. A malicious controller can send an R2T for a READ and
the host will answer it: nvme_tcp_setup_h2c_data_pdu() builds the
H2CData header and nvme_tcp_try_send_data() sends the request's data
buffer. That buffer is the READ destination, so its contents go to the
controller.
The command then completes normally and nothing is logged.
Against a test controller that answers every READ with an R2T, a 4096
byte buffered read returned all 4096 bytes, split over two R2Ts. The
pages contained stale kernel data, including an array of struct page
pointers.
Reject an R2T for a request that is not a write.
Published Sep 11, 2026 · Updated Oct 19, 2026
High · CVSS 7.5
In the Linux kernel, the following vulnerability has been resolved:
nvme-tcp: reject a read that transferred too few bytes
nvme_tcp_recv_data() completes a request once the current C2HData PDU
has been consumed. Nothing compares the total bytes received against
the length the command asked for: struct nvme_tcp_request has no
receive-side counter, queue->data_remaining is per queue, and
blk_mq_end_request() completes for blk_rq_bytes(rq) unconditionally
with no residual concept anywhere above.
A controller can therefore answer a 4096-byte read with 512 bytes and
have it reported as a complete read; user space then gets 4096 bytes of
which 3584 are whatever was already in the page. I reproduced that with
a test target.
Count the bytes received and refuse to complete a successful read whose
count does not match, at the two NVME_TCP_F_DATA_SUCCESS paths and in
nvme_tcp_process_nvme_cqe(). The success test shifts req->status right
by one, because the driver keeps the wire value there and shifts it on
completion, so the check must see what the completion path will see.
Only REQ_OP_READ is checked, because there the length comes from the
sectors the request covers; a passthrough command is built by its
submitter, which picks both command and buffer, so the kernel has
nothing to compare against.
Published Sep 11, 2026 · Updated Oct 19, 2026
Critical · CVSS 9.8
In the Linux kernel, the following vulnerability has been resolved:
sctp: stop processing a packet once its association is deleted
sctp_endpoint_bh_rcv() looks the association up only when chunk->asoc is
NULL, and caches the result in chunk->asoc and chunk->transport without
taking a reference.
A packet that matches no association is handed to the endpoint, so a peer
can bundle COOKIE ECHO, SHUTDOWN and SHUTDOWN ACK in one packet. The
COOKIE ECHO creates the association, the SHUTDOWN chunk caches it, and
with the outqueue empty the SHUTDOWN ACK reaches sctp_sf_do_9_2_final(),
so the association and its transports are freed.
The endpoint loop has no counterpart to the asoc->base.dead check in
sctp_assoc_bh_rcv(). The next chunk writes to last_time_heard in the freed
transport and is then passed to sctp_do_sm() with the freed association.
The transport is freed through RCU, so this needs the packet to come off
the socket backlog, where the loop runs in task context.
The endpoint loop cannot do the same check: it holds no reference on the
association, so reading asoc->base.dead would itself be a use-after-free.
Mark the packet for discard in the command interpreter, just before it
deletes the association. That is also before sctp_inq_free() releases the
chunk on the association receive path.
sctp_sf_do_5_2_4_dupcook() issues SCTP_CMD_DELETE_TCB for the temporary
association, while the one the packet belongs to stays alive. A restarting
peer can bundle DATA behind its COOKIE ECHO, so compare against
chunk->asoc and leave that case alone.
Published Sep 11, 2026 · Updated Oct 19, 2026
Critical · CVSS 9.8
In the Linux kernel, the following vulnerability has been resolved:
sctp: drop a chunk if its transport was removed
sctp_rcv() resolves the transport once per packet and leaves it in
chunk->transport. The lookup reference, or the one sctp_add_backlog() takes
if the socket is owned by userspace, keeps it around until the chunk has
been processed.
An authenticated ASCONF DEL-IP can remove it in the meantime.
sctp_assoc_rm_peer() takes the transport out of the association and calls
sctp_transport_free(), which tags it dead and drops the reference the
association held. There is a window on both paths: the packet can sit on
the socket backlog, and on the direct path the lookup completes before
bh_lock_sock().
The DATA chunk in that packet puts the removed transport back into
asoc->peer.last_data_from. Once the packet is done that reference goes
away and the transport is freed by RCU, so the next delayed SACK carries
the pointer into the SACK chunk and sctp_outq_select_transport() reads the
freed transport's state.
Drop the chunk in sctp_inq_push(), next to the existing rcvr->dead check.
Both paths reach it with the association's socket lock held. The peer
retransmits it.
Published Sep 11, 2026 · Updated Oct 19, 2026
High · CVSS 7.5
In the Linux kernel, the following vulnerability has been resolved:
sctp: fix NULL deref on untransmitted RECONF completion
sctp_process_strreset_outreq(), sctp_process_strreset_addstrm_out() and
sctp_process_strreset_resp() complete a pending stream reconfiguration
request by stopping the reconf timer on the transport it was sent on:
t = asoc->strreset_chunk->transport;
if (timer_delete(&t->reconf_timer))
sctp_transport_put(t);
chunk->transport is assigned by __sctp_packet_append_chunk() when the
chunk is appended to an outbound packet, and sctp_outq_flush_ctrl() arms
the reconf timer at that same point. A request already published in
asoc->strreset_chunk but not yet transmitted has neither, so completing
it dereferences NULL.
Two ways to get there. sctp_send_asconf_del_ip() sets
asoc->src_out_of_asoc_ok without sending anything when the address being
removed is the association's last one, and sctp_outq_flush_ctrl() then
leaves every non-ASCONF control chunk queued; as only
sctp_process_asconf_ack() clears that flag, it persists. An unprivileged
process that removes such an address and then asks for a stream reset
panics the kernel from softirq. A peer needs neither ASCONF nor local
help: sctp_cmd_interpreter() uncorks the outqueue only once the whole
packet has been processed, so a reply built while walking a RECONF chunk
stays untransmitted for the rest of that walk, and one RECONF chunk
carrying [Incoming SSN Reset Request, Outgoing SSN Reset Request,
Response] -- or two RECONF chunks in one packet -- reaches the same
dereference.
KASAN: null-ptr-deref in range [0x00000000000001e8-0x00000000000001ef]
RIP: 0010:timer_delete+0x67/0x110
Call Trace:
<IRQ>
sctp_process_strreset_addstrm_out (net/sctp/stream.c:832)
sctp_sf_do_reconf (net/sctp/sm_statefuns.c:4212)
sctp_do_sm (net/sctp/sm_sideeffect.c:1172)
sctp_assoc_bh_rcv (net/sctp/associola.c:1044)
sctp_rcv (net/sctp/input.c:243)
ip_local_deliver (net/ipv4/ip_input.c:262)
process_backlog (net/core/dev.c:6680)
</IRQ>
A response can only acknowledge a request that was actually sent, so do
not match asoc->strreset_chunk while chunk->transport is NULL. Guarding
the lookup covers all three completion sites.
Published Sep 11, 2026 · Updated Oct 19, 2026
High · CVSS 7.5
In the Linux kernel, the following vulnerability has been resolved:
sctp: fix stream->outcnt underflow on duplicate RECONF responses
A cached RECONF chunk may contain more than one request parameter. A
duplicate response can therefore find and process the same ADD_OUT request
again while another parameter is still outstanding, rolling back outcnt
twice and possibly underflowing it.
Track outstanding request types as bits and clear each bit after its first
response. Later responses for the same request are then ignored.
Published Sep 11, 2026 · Updated Oct 19, 2026
Unknown · CVSS Not scored
In the Linux kernel, the following vulnerability has been resolved:
power: supply: bq24257: fix use-after-free on remove
The STAT-pin interrupt is devm-managed, so it stays armed until the devm
cleanup that runs after remove() returns. remove() cancels
bq->iilimit_setup_work while the threaded handler can still fire; that
handler reschedules the work and dereferences bq, so the work runs
against freed memory once devm frees bq.
Make the delayed work device-managed with devm_delayed_work_autocancel(),
registered before the interrupt request. The devm cleanup then releases
the interrupt first, so the handler can no longer reschedule the work,
and cancels the work before bq is freed. The explicit
cancel_delayed_work_sync() in remove() is no longer needed and is dropped.
Found by static analysis.
Published Sep 11, 2026 · Updated Oct 19, 2026
Unknown · CVSS Not scored
In the Linux kernel, the following vulnerability has been resolved:
power: supply: bq256xx: drain usb_work before freeing the charger
The USB-PHY notifier queues usb_work, whose handler calls
power_supply_changed(bq->charger). The reset devm action only unregisters
the notifier and was registered before the power supplies, so devm frees
bq->charger on unwind before the action runs; a usb_work still queued can
then dereference it.
Register the reset action after the power supplies, so it unregisters
the notifiers and drains usb_work before the supplies are released.
Initialize usb_work and obtain the PHY references before registering
the notifiers, so the worker cannot run before the supplies exist.
Found by static analysis.
Published Sep 11, 2026 · Updated Oct 19, 2026
Unknown · CVSS Not scored
In the Linux kernel, the following vulnerability has been resolved:
power: supply: bq25890: Fix power_supply reference leak
bq25890_fw_probe() acquires a reference to a secondary charger using
power_supply_get_by_name(), but the reference is not released on later
probe failures or on driver detach.
In particular, failures after bq25890_fw_probe() returns successfully,
such as a failure in bq25890_hw_init(), also leak the reference.
Register a device-managed cleanup action immediately after acquiring
the secondary charger. This releases the reference on all subsequent
probe failures and on driver detach.
Found by code review.
Published Sep 11, 2026 · Updated Oct 19, 2026
High · CVSS 7.8
In the Linux kernel, the following vulnerability has been resolved:
power: supply: charger-manager: register regulators before exposing sysfs
charger_manager_remove() and the err_reg_extcon probe error path free each
charger regulator with regulator_put() before tearing down the power_supply
sysfs entries (power_supply_unregister()). charger_manager_remove() also
calls try_charger_enable(cm, false) after the regulator_put() loop. A
concurrent write to a charger's externally_control sysfs attribute that
lands between regulator_put() and power_supply_unregister() can run
charger_externally_control_store() and call try_charger_enable(), which,
when charging is enabled, dereferences the already-freed consumer handle.
When charging is enabled, try_charger_enable(cm, false) in .remove() also
dereferences the freed handles directly. Both leave use-after-free windows.
Symmetrically, probe registers the sysfs entries (power_supply_register)
before acquiring the regulators (regulator_get, inside
charger_manager_register_extcon), so userspace can reach externally_control
before the regulators are available.
Split charger_manager_register_extcon() on the sync/async boundary:
charger_manager_get_regulators() (regulator_get only, no async producer)
now runs before power_supply_register() so sysfs is not live before
regulators are available, and charger_manager_register_extcon() keeps only
the extcon notifier/work setup, still after power_supply_register() so a
power_supply_register() failure cannot reach extcon setup. This keeps the
sysfs setup/teardown ordering symmetric without introducing an asynchronous
producer on the earlier probe-error path.
Move power_supply_unregister() and try_charger_enable(cm, false) ahead of
the regulator_put() loop on both teardown paths, and adjust err_reg_extcon
(power_supply_unregister() then fall through err_regulator for
regulator_put(); get_regulators self-rolls back on its own failure).
This does not address the separate extcon-notifier-driven deref of the same
handles, which needs its own synchronization design.
Found by an in-house static analysis tool.
Published Sep 11, 2026 · Updated Oct 19, 2026
High · CVSS 8.4
In the Linux kernel, the following vulnerability has been resolved:
power: supply: cros_usbpd-charger: bound the EC-reported port count
cros_usbpd_charger_probe() reads two port counts from the EC and uses
one of them, num_charger_ports, as the loop bound when populating a
fixed-size array:
struct port_data *ports[EC_USB_PD_MAX_PORTS]; /* 8 entries */
...
for (i = 0; i < charger->num_charger_ports; i++)
charger->ports[charger->num_registered_psy++] = port;
Both num_usbpd_ports (from EC_CMD_USB_PD_PORTS) and num_charger_ports
(from EC_CMD_CHARGE_PORT_COUNT) are u8 values reported by the EC. The
only validation is a sanity check that compares the two EC-reported
values against each other:
if (num_charger_ports < num_usbpd_ports ||
num_charger_ports > num_usbpd_ports + 1)
return -EPROTO;
It never checks either count against EC_USB_PD_MAX_PORTS, the size of
the ports[] array. A malfunctioning, malicious or compromised EC that
reports num_usbpd_ports == num_charger_ports == N for any N > 8 (for
example both 255) passes this check, and the loop then writes N pointers
into the 8-entry ports[] array embedded in the devm_kzalloc()'d
charger_data, overflowing it by up to 255 - 8 = 247 entries (~1976
bytes): a slab out-of-bounds write.
Reject a port count larger than the ports[] array can hold.
Published Sep 11, 2026 · Updated Oct 19, 2026
High · CVSS 8.4
In the Linux kernel, the following vulnerability has been resolved:
power: supply: cros_usbpd: Limit port counts to EC_USB_PD_MAX_PORTS
Currently the cros_usbpd-charger driver probe iterates based on raw
charger port count returned by the embedded controller. The only check
is against the number of USB PD ports which the embedded controller
also defines. A malicious embedded controller could return an inaccurate
port count (up to 255) resulting in an out of bounds write and
subsequent memory corruption.
Update helper functions in cros_usbpd-charger to limit port counts to
EC_USB_PD_MAX_PORTS.
Published Sep 11, 2026 · Updated Oct 19, 2026
High · CVSS 8.4
In the Linux kernel, the following vulnerability has been resolved:
power: supply: lp8727: fix use-after-free in lp8727_release_irq()
lp8727_isr_func(), the threaded IRQ handler, is the only caller that arms
pchg->work via schedule_delayed_work(). lp8727_release_irq() currently
cancels the work before freeing the IRQ, so an IRQ delivered in between
can re-arm the work through the threaded handler. After .remove returns
the devm layer frees pchg while lp8727_delayed_func() may still run and
dereference it.
Free the IRQ first so the threaded handler is quiesced and can no longer
queue work, then cancel the delayed work to drain the final generation.
This issue was found by an in-house static analysis tool.
Published Sep 11, 2026 · Updated Oct 19, 2026
Unknown · CVSS Not scored
In the Linux kernel, the following vulnerability has been resolved:
power: supply: lp8788-charger: fix use-after-free on remove
lp8788_charger_remove() flushes charger_work before unregistering the
IRQs. An IRQ thread can queue charger_work after flush_work() has
returned. The work can then run after devres frees pchg and dereference
it in lp8788_charger_event().
Unregister the IRQs first. free_irq() waits for any running threaded
handler, so no handler can queue more work afterwards. Then use
cancel_work_sync() to cancel pending work or wait for running work to
finish.
This issue was found by an in-house static analysis tool.
Published Sep 11, 2026 · Updated Oct 19, 2026
Unknown · CVSS Not scored
In the Linux kernel, the following vulnerability has been resolved:
power: supply: qcom_battmgr: fix use-after-free
qcom_battmgr_pdr_notify() queues enable_work when the PMIC GLINK service
comes up, and the worker recovers battmgr through container_of() to issue
firmware requests. The PMIC GLINK client stays on the client list until
its devres release action runs, so a PDR notification can keep queueing
the work, and a pending or running worker can access battmgr after devres
frees it.
Make enable_work device-managed with devm_work_autocancel(), registered
before the PMIC GLINK client is allocated. The devres cleanup then
releases the client first, so no further notification can queue the work,
and cancels the work before battmgr is freed.
This issue was found by an in-house static analysis tool.
Published Sep 11, 2026 · Updated Oct 19, 2026
High · CVSS 7.7
In the Linux kernel, the following vulnerability has been resolved:
power: supply: qcom_battmgr: terminate the strings from firmware
The qcom_battmgr_sc8280xp_strcpy() takes a Pascal-style string when the
firmware sends one. Otherwise it copies all BATTMGR_STRING_LEN bytes and
leaves the destination without a terminator.
Those destinations are model_number, serial_number and oem_info, each
BATTMGR_STRING_LEN and declared next to each other. They go out to user
space as val->strval, which power_supply_format_property() prints with
"%s", so a firmware string that fills the whole field makes that read run
into the following members.
Use strscpy() so the copy always terminates, the way the SM8350 path
already does for the same field.
Published Sep 11, 2026 · Updated Oct 19, 2026
High · CVSS 8.4
In the Linux kernel, the following vulnerability has been resolved:
power: supply: rt9455: quiesce delayed work before teardown
The threaded IRQ handler can queue pwr_rdy_work,
max_charging_time_work and batt_presence_work. pwr_rdy_work and
batt_presence_work can also queue max_charging_time_work, while
batt_presence_work can requeue itself.
rt9455_remove() cancels max_charging_time_work before
batt_presence_work. The latter can therefore queue
max_charging_time_work after it has already been cancelled:
rt9455_remove() workqueue
cancel pwr_rdy_work
cancel max_charging_time_work
batt_presence_work queues
max_charging_time_work
cancel batt_presence_work
return
devres frees rt9455_info
max_charging_time_work dereferences
rt9455_info
The IRQ also remains registered until devres cleanup and can queue more
work after any of the cancellation calls. If rt9455_hw_init() fails
after the IRQ has been requested, probe returns without cancelling work
that may already have been queued. A pending callback can then access
rt9455_info after it has been freed.
Register rt9455_cancel_all_delayed_works() through
devm_add_action_or_reset() right after devm_power_supply_register().
devres invokes the action in reverse registration order, after the
managed IRQ has been freed and before rt9455_info is released, so the
delayed works are drained in both rt9455_remove() and the probe error
path. Cancel pwr_rdy_work and batt_presence_work before
max_charging_time_work because both can queue the latter.
This issue was found by an in-house static analysis tool.
Published Sep 11, 2026 · Updated Oct 19, 2026
Unknown · CVSS Not scored
In the Linux kernel, the following vulnerability has been resolved:
power: supply: twl4030_charger: cancel workers via devm
bci is devm-allocated. Two workers (bci->work and bci->current_worker)
dereference it. twl4030_bci_remove() disables charging and masks
interrupts. It cancels neither worker. A worker pending at remove() can
run after devm frees bci.
The USB transceiver comes from devm_usb_get_phy_by_node(). devm
unregisters its notifier only after remove() returns. A cancel_work_sync()
in remove() can then race a notifier reschedule. devm_work_autocancel()
and devm_delayed_work_autocancel() avoid that. They cancel the workers
during devm release, before bci is freed.
The current_worker is registered first, since devm will cancel in
reverse order and bci->work can reschedule current_worker.
[Move comment about order into the commit message]
Published Sep 11, 2026 · Updated Oct 19, 2026
Unknown · CVSS Not scored
In the Linux kernel, the following vulnerability has been resolved:
power: supply: ucs1002: fix use-after-free on remove
ucs1002 has no remove callback, so unbind runs entirely through devm.
The alert IRQ handler queues the health_poll delayed work, and the work
reschedules itself while the chip reports a bad-health condition. devm
frees the alert IRQ, which only synchronizes the handler; it does not
cancel the delayed work, which can then run after devm frees the driver
data and dereference it.
Register health_poll with devm_delayed_work_autocancel() before the
alert IRQ is requested. devm then frees the IRQ before cancelling the
work, so the handler can no longer queue it and the work is cancelled
before the driver data is freed.
This issue was found by an in-house static analysis tool.
Published Sep 11, 2026 · Updated Oct 19, 2026
Unknown · CVSS Not scored
In the Linux kernel, the following vulnerability has been resolved:
power: supply: max17040: propagate register read errors
max17040_get_vcell() and max17040_get_soc() ignore errors returned by
regmap_read(). When an I2C transfer fails, the uninitialized register
value is converted and reported to userspace as a valid voltage or state
of charge. The polling worker can also replace the cached state of charge
with the bogus value and emit a spurious change event.
Propagate read errors through the power supply get_property callback and
keep the last valid cached state of charge when polling fails.
Published Sep 11, 2026 · Updated Oct 19, 2026
Unknown · CVSS Not scored
In the Linux kernel, the following vulnerability has been resolved:
power: supply: max17040: synchronize work cancellation on suspend
max17040_work() requeues itself after every poll. cancel_delayed_work()
only cancels a pending instance and does not wait for a callback that is
already running.
If system suspend races with the polling callback, the callback can
continue accessing the fuel gauge and requeue itself after the suspend
callback returns.
Use cancel_delayed_work_sync() to ensure polling is quiesced before
suspend completes.
Published Sep 11, 2026 · Updated Oct 19, 2026
Unknown · CVSS Not scored
In the Linux kernel, the following vulnerability has been resolved:
s390/cpum_cf: Handle CPU hotplug via prepare/dead callbacks
The command 'perf stat -e cycles -- <command>' crashes the kernel
when CPUs are hotplug added during that run.
Root cause is the allocation of struct cpu_cf_events at first
event initialization. The allocation is dynamic and the first
event that has task context creates such a structure for
each online CPU. This is not sufficient. CPUs may be offline
during event creation and can be set online during the
perf run time. For example commands
# echo 0 > /sys/devices/system/cpu/cpu1/online
# perf stat -e cycles -i -- stress-ng -t10s --matrix X
# sleep 1
# echo 1 > /sys/devices/system/cpu/cpu1/online
create an event for CPUs 0,2-X. Since the events are created with
task-context, the scheduler will eventually schedule the program
on CPU1. This CPU has not created and initialized any per
CPU event infrastructure as that CPU was not online at the time
of the perf invocation. Thus when the scheduler runs stress-ng
on CPU1, the function cpumf_pmu_add() refers to a NULL pointer:
struct cpu_cf_events *cpuhw = this_cpu_cfhw();
This function call is invoked after the task stress-ng has been
made runnable on CPU1. And this_cpu_cfhw() returns NULL.
The result is a panic:
Unable to handle kernel pointer dereference in virtual kernel address space
Failing address: 0000000000000000 TEID: 0000000000000483
....
Krnl PSW : 0404d00180000000 000003ef8291fd0c (cpumf_pmu_add+0x3c/0x80)
....
Call Trace:
[<000003ef8291fd0c>] cpumf_pmu_add+0x3c/0x80
[<000003ef82bb5e3e>] event_sched_in+0xae/0x190
[<000003ef82bb60d6>] merge_sched_in+0x1b6/0x390
[<000003ef82bb65b8>] visit_groups_merge.constprop.0.isra.0+0x308/0x5b0
[<000003ef82bb689a>] pmu_groups_sched_in+0x3a/0x50
[<000003ef82bb6a30>] ctx_sched_in+0x180/0x260
[<000003ef82bb780c>] perf_event_context_sched_in+0x11c/0x2d0
[<000003ef82bb79ee>] __perf_event_task_sched_in+0x2e/0xc0
[<000003ef82994834>] finish_task_switch.isra.0+0x1a4/0x250
....
Last Breaking-Event-Address:
[<000003ef8291f1d8>] this_cpu_cfhw+0x38/0x40
The issue arises only in per-task context when the CPUMF facility is
used and the scheduler picks a random CPU for such a process to run on.
The scheduler enables the CPUMF infrastructure via PMU callback
functions pmu::add() and pmu::del().
Introduce a CPU hotplug prepare/dead callback pair which creates and
removes the per CPU counter data while the CPU is offline. Count the
users which track every CPU (cpu == -1), that is perf_event_open()
events with task context and /dev/hwctr device sessions, in the new
counter cpu_cf_root::tskcnt, protected by pmc_reserve_mutex.
This ensures the infrastructure is available when
new CPU is selected to run the per-task context process.
In cpum_cf_free_root() and cpum_cf_free_cpu() ensure the reference
pointer to data structures is set to NULL before the data is freed
to prevent interrupt handlers to access stale data.
[gor@linux.ibm.com: change commit message]
Published Sep 11, 2026 · Updated Oct 19, 2026
High · CVSS 7
In the Linux kernel, the following vulnerability has been resolved:
s390/percpu: Fix MVIY_PERCPU() with older binutils
Commit a737737cdb9c ("s390/percpu: Infrastructure for more efficient
this_cpu operations") introduced MVIY_PERCPU(), which stringifies
arguments that are already C string literals. This generates an
assembler macro invocation with whitespace-separated quoted arguments:
GEN_MVIY "459712" "%r3"
GNU as versions prior to binutils 2.39 drop the separating whitespace
between quoted macro arguments during input scrubbing. They
consequently parse the invocation as a single argument and emit
repeated warnings:
Warning: missing closing `"'
The .ifc in GEN_MVIY never matches and GNU as exits successfully
without emitting the mviy instruction. As a result, the interrupted
per-CPU sequence is not marked in lowcore and the exception return
path cannot repair the per-CPU address register after migration.
All MVIY_PERCPU() callers pass C string literals. Use them directly
and separate the assembler macro arguments with an explicit comma. The
resulting invocation is:
GEN_MVIY 459712, %r3
This form is unambiguous for GNU as and LLVM's integrated assembler.
This behavior was fixed in GNU as from binutils 2.39, but Linux
supports binutils 2.30.
Published Sep 11, 2026 · Updated Oct 19, 2026
Unknown · CVSS Not scored
In the Linux kernel, the following vulnerability has been resolved:
s390/dasd: Do not complete a failed ESE read as successful
dasd_int_handler() completes an NRF read of an unallocated ESE track by
calling ese_read() and unconditionally marking the request
DASD_CQR_SUCCESS. dasd_eckd_ese_read() can return an error before it has
zeroed the destination buffer: a failed sense-data parse or a current
track outside the requested range both return early, leaving the
destination pages untouched. The request is still completed successfully,
so the block layer is handed stale / uninitialized memory instead of
zeros.
Check the ese_read() return value and fail the request through the normal
error path instead of forcing DASD_CQR_SUCCESS.
Published Sep 11, 2026 · Updated Oct 19, 2026
Unknown · CVSS Not scored
In the Linux kernel, the following vulnerability has been resolved:
s390/dasd: Guard sysfs discipline callbacks against unallocated private data
Several sysfs show/store handlers call a discipline callback that
dereferences device->private, either directly or through the
DASD_DEFINE_ATTR() macro. During dasd_generic_set_online() the discipline
is assigned before check_device() allocates device->private, so an
unprivileged read of one of these world-readable attributes in that window
dereferences a NULL pointer and panics.
Guard the dereference inside each callback that actually touches
device->private.
Published Sep 11, 2026 · Updated Oct 19, 2026
High · CVSS 7
In the Linux kernel, the following vulnerability has been resolved:
s390/dasd: Propagate partial completion length across ERP recovery
dasd_default_erp_postaction() copies the timing and device state from
the finished ERP request back to the original request but drops
proc_bytes. A request that was partially completed, an ESE read of a
not-yet-allocated track returns fewer bytes than requested, and then
recovered through the ERP chain loses its partial-completion length.
__dasd_cleanup_cqr() then sees proc_bytes == 0 and completes the whole
request instead of requeueing the remainder, silently returning zeroed
data for the part that was never read.
Carry proc_bytes over to the original request like the other
per-request state.
Published Sep 11, 2026 · Updated Oct 19, 2026
Unknown · CVSS Not scored
In the Linux kernel, the following vulnerability has been resolved:
PCI: plda: Fix use-after-free of event IRQs during teardown
plda_pcie_irq_domain_deinit() removes pcie->event_domain via
irq_domain_remove(), but the per-event IRQs mapped from that domain
are requested with devm_request_irq() in plda_init_interrupts(). The
actual free_irq() for a devm-managed IRQ is deferred by devres until
after the calling probe()/remove() function returns.
This means irq_domain_remove() can free the domain's internal data
before the deferred free_irq() for IRQs still mapped into it has run.
When devres later processes that deferred cleanup, it can end up
dereferencing the already-freed domain.
Free each event IRQ explicitly with devm_free_irq() before removing
the domain. This triggers the free immediately and removes the IRQ
from the devres tracking list, so devres will not attempt to free it
a second time later.
Also dispose of the event, INTx, and MSI IRQ mappings with
irq_dispose_mapping() before their owning domains are removed.
Finally, guard the calls to irq_set_chained_handler_and_data() for
pcie->irq, pcie->msi_irq, and pcie->intx_irq so they only run when
those fields hold a valid (>0) IRQ number.
This is a pre-existing issue, flagged by automated review during work
on an earlier, unrelated patch to this driver.
Build-tested and boot-tested on StarFive VisionFive v1.2A board
Published Sep 11, 2026 · Updated Oct 19, 2026
Unknown · CVSS Not scored
In the Linux kernel, the following vulnerability has been resolved:
PCI: plda: Fix IRQ domain leaks in the error paths of plda_init_interrupts()
plda_init_interrupts() initializes IRQ domains and creates IRQ mapping but
does not unwind them when later step fails.
If platform_get_irq() or either irq_create_mapping() fails
in plda_init_interrupts(), the domains are never deinitialized. If
irq_create_mapping() fails, port->intx_irq stays initialized.
Hence, remove the IRQ domains in the error path by calling
plda_pcie_irq_domain_deinit().
Since plda_pcie_irq_domain_deinit() now disposes of the intx_irq and
msi_irq mappings itself before removing their domains, the msi_irq
mapping failure path can go directly to err_irq_domain_deinit instead of
disposing of port->intx_irq separately first.
This issue was found by automated review of sashiko-bot
[mani: commit log]
Published Sep 11, 2026 · Updated Oct 19, 2026
