LiveActive security incident?Get immediate response
CVE archive

August 2026

Browse CVE records published in August 2026, with severity, affected products, CWE, KEV, and source-backed vulnerability context.

Search all CVEsKnown exploited

Showing 50 of 11956 matching CVEs · Page 16 of 240.

Critical · CVSS 9.4

CVE-2026-77812: Cleartext Exposure of DJI Drone Wi-Fi Credentials via BLE

DJI drones transmit DUML (DJI Universal Markup Language) protocol messages over BLE (Bluetooth Low Energy) without encryption. When a client attempts to connect to the drone over Wi-Fi, or when the drone is switched to QuickTransfer mode, the DJI Fly application exchanges DUML messages with the drone over BLE, including the Wi-Fi credentials. An attacker within BLE range can passively sniff this traffic and recover the credentials in cleartext, including the drone's Wi-Fi PSK, SSID, and trusted identifier UUID. Obtaining these credentials allows the attacker to join the drone's internal Wi-Fi network, interact with network services exposed by the drone, and decrypt Wi-Fi traffic exchanged between the drone and the legitimate user. * An attacker within BLE range recovers the Wi-Fi SSID and PSK in cleartext, and can then join the drone's network * The same capture also exposes the session UUID identifier, which is the only thing the drone uses to tell a trusted client from an unknown one, so the attacker can replay it and skip the physical confirmation of new connected devices. * The credentials do not change between sessions unless the operator manually resets the Wi-Fi settings, so one capture stays valid indefinitely * The attack is fully passive, with nothing transmitted and no connection made, so neither the operator nor the drone has any indication the session was observed * A BLE sniffer and presence during one normal DJI Fly connection are needed Affected models are DJI Neo until 01.00.0400, DJI Neo 2 until 01.00.0500, DJI Flip until 01.00.1200, DJI Air 3 until 01.00.1600, DJI Air 3S until 01.00.1400, DJI Avata 2 until 01.00.0400, DJI Avata 360 until 01.00.0300, DJI Mavic 3 until 01.00.1400, DJI Mavic 3 Classic until 01.00.0800, DJI Mavic 3 Pro until 01.01.0700, DJI Mavic 4 Pro until 01.00.0500, DJI Mini 2 until 01.07.0200, DJI Mini 3 until 01.00.0500, DJI Mini 3 Pro until 01.00.0900, DJI Mini 4 Pro until 01.00.1100, and DJI Mini 5 Pro until 01.00.0600. Remediation requires a firmware update from the vendor. There is no user-side mitigation that fully addresses the vulnerability without upgrading.

Published Aug 21, 2026 · Updated Oct 12, 2026

High · CVSS 8.5

CVE-2026-78306: DJI Drone Bluetooth Interface Unauthenticated DUML Command Execution

DJI drones expose an unauthenticated DUML command interface over Bluetooth that allows an attacker within Bluetooth range to modify Wi-Fi configuration parameters, including the SSID, PSK, MAC address, regulatory country code, and wireless channel. An attacker can overwrite the Wi-Fi PSK with a known value and connect to the drone's internal Wi-Fi network, potentially gaining access to the flight control interface and issuing flight commands. Crafted DUML commands can also disable or restart the Wi-Fi and Bluetooth interfaces, disconnect Wi-Fi clients, or reset wireless configuration, resulting in a denial-of-service condition that can disrupt the operator's wireless control, video, and telemetry connections during flight. Affected models are DJI Neo until 01.00.0400, DJI Neo 2 until 01.00.0500, DJI Flip until 01.00.1200, DJI Air 3 until 01.00.1600, DJI Air 3S until 01.00.1400, DJI Avata 2 until 01.00.0400, DJI Avata 360 until 01.00.0300, DJI Mavic 3 until 01.00.1400, DJI Mavic 3 Classic until 01.00.0800, DJI Mavic 3 Pro until 01.01.0700, DJI Mavic 4 Pro until 01.00.0500, DJI Mini 2 until 01.07.0200, DJI Mini 3 until 01.00.0500, DJI Mini 3 Pro until 01.00.0900, DJI Mini 4 Pro until 01.00.1100, and DJI Mini 5 Pro until 01.00.0600. Remediation requires a firmware update from the vendor.

Published Aug 24, 2026 · Updated Oct 12, 2026

High · CVSS 7.2

CVE-2026-71364: Awx: project archive extraction allows path traversal file writes

A path traversal vulnerability was found in AWX's project archive extraction. The project_archive action plugin extracts zip and tar archive members by joining the project directory path with the member filename without performing path normalization, boundary validation, or rejecting directory traversal sequences. A malicious archive containing members with path traversal components can write files to arbitrary locations on the execution node's filesystem outside the intended project directory. An attacker who controls the archive content, either through a compromised upstream source, a malicious archive URL, or a man-in-the-middle attack on a plain HTTP connection, can achieve arbitrary file writes as the user performing the extraction, potentially leading to remote code execution through mechanisms such as cron files, SSH authorized keys, or playbook content injection.

Published Aug 24, 2026 · Updated Oct 12, 2026

High · CVSS 8

CVE-2026-15581: Trustyai-service-operator: trustyai-service-operator: tas internal service bypasses kube-rbac-proxy, exposing unauthenticated quarkus api cluster-wide

A flaw was found in the TrustyAI Service (TAS) deployment. This vulnerability allows any pod on the cluster network to bypass authentication and directly access the TAS backend API. An attacker can exploit this to read, tamper with, or delete monitoring data and configurations, and inject arbitrary data into the service, potentially disrupting tenant operations.

Published Aug 10, 2026 · Updated Oct 12, 2026

High · CVSS 7.3

CVE-2026-42169: Gimp: gimp apng loader heap-buffer-overflow when fctl width exceeds ihdr width (file-png.c)

A heap-buffer-overflow vulnerability exists in the APNG (Animated PNG) file loader of GIMP. This flaw occurs when the `fcTL` width exceeds the `IHDR` width, leading to pixel data being written past the end of a heap allocation. Additionally, a heap-based buffer overflow exists in the DDS plug-in due to a BPP mismatch in the `load_layer()` function. Both vulnerabilities can be triggered by opening a specially crafted image file, potentially leading to code execution.

Published Aug 4, 2026 · Updated Oct 12, 2026

High · CVSS 8.4

CVE-2026-59090: Gimp: gimp: arbitrary code execution in psd plugin due to unsigned underflow

A flaw was found in GIMP's PSD file format plugin. This vulnerability, an unsigned integer underflow in the `block_rem` variable, occurs when a user opens a specially crafted `.psd` image file. The underflow leads to parser confusion, enabling an attacker to inject arbitrary data as layer resource blocks. This can ultimately result in arbitrary code execution, allowing the attacker to run malicious code on the victim's system.

Published Aug 10, 2026 · Updated Oct 12, 2026

High · CVSS 7.8

CVE-2026-72693: Kbd: local privilege escalation in openvt via incorrect process owner verification allowing passwordless root login

`openvt -u` is intended to identify the owner of the current VT and then execute `login` as that user from a privileged context. In the documented `kbrequest`/init usage, the ownership test in `authenticate_user()` relies on `stat("/proc/<pid>/fd/0")`. `stat()` on `/proc/<pid>/fd/0` follows the symlink to the underlying TTY device node. As a result, `buf.st_uid` reflects the owner of the TTY node rather than the owner of the process holding the file descriptor. If the TTY owner returns to `root` or the getty owner after logout while an unprivileged process still has `fd 0` attached to that TTY, the check can incorrectly treat that process as belonging to the privileged console owner. Once that check succeeds, the `-u` path executes a passwordless login as the selected user. In the documented `kbrequest`/init deployment using `openvt -us`, this can result in passwordless `login -f root` on the spawned VT. This report establishes that privilege escalation path for that documented deployment; it does not claim equivalent reachability for deployments that do not use `openvt -u` from a privileged `kbrequest`/init path.

Published Aug 11, 2026 · Updated Oct 9, 2026

High · CVSS 7.5

CVE-2026-15816: Dracut: dracut: root code execution via unescaped error message written to sourced emergency hook script in die()

A flaw was found in dracut. The die() error-handling function writes its message into a shell script under the initramfs emergency-hook directory without properly shell-quoting it. When the message contains data derived from the DHCP ROOT_PATH option, an attacker on the adjacent network who controls a rogue DHCP server can inject a command-substitution sequence that executes as root the next time dracut sources its emergency hook scripts during standard boot-failure handling.

Published Aug 7, 2026 · Updated Oct 8, 2026