LiveActive security incident?Get immediate response
CVE archive

May 2026

Browse CVE records published in May 2026, with severity, affected products, CWE, KEV, and source-backed vulnerability context.

Showing 50 of 6036 matching CVEs · Page 28 of 121.

Unknown · CVSS Not scored

CVE-2026-46075: crypto: atmel-sha204a - Fix potential UAF and memory leak in remove path

In the Linux kernel, the following vulnerability has been resolved: crypto: atmel-sha204a - Fix potential UAF and memory leak in remove path Unregister the hwrng to prevent new ->read() calls and flush the Atmel I2C workqueue before teardown to prevent a potential UAF if a queued callback runs while the device is being removed. Drop the early return to ensure sysfs entries are removed and ->hwrng.priv is freed, preventing a memory leak.

Published May 27, 2026 · Updated Jun 14, 2026

Unknown · CVSS Not scored

CVE-2026-46074: spi: ch341: fix memory leaks on probe failures

In the Linux kernel, the following vulnerability has been resolved: spi: ch341: fix memory leaks on probe failures Make sure to deregister the controller, disable pins, and kill and free the RX URB on probe failures to mirror disconnect and avoid memory leaks and use-after-free. Also add an explicit URB kill on disconnect for symmetry (even if that is not strictly required as USB core would have stopped it in the current setup).

Published May 27, 2026 · Updated Jun 14, 2026

Unknown · CVSS Not scored

CVE-2026-46073: hwmon: (powerz) Fix missing usb_kill_urb() on signal interrupt

In the Linux kernel, the following vulnerability has been resolved: hwmon: (powerz) Fix missing usb_kill_urb() on signal interrupt wait_for_completion_interruptible_timeout() returns -ERESTARTSYS when interrupted. This needs to abort the URB and return an error. No data has been received from the device so any reads from the transfer buffer are invalid. The original code tests !ret, which only catches the timeout case (0). On signal delivery (-ERESTARTSYS), !ret is false so the function skips usb_kill_urb() and falls through to read from the unfilled transfer buffer. Fix by capturing the return value into a long (matching the function return type) and handling signal (negative) and timeout (zero) cases with separate checks that both call usb_kill_urb() before returning.

Published May 27, 2026 · Updated Jun 14, 2026

Unknown · CVSS Not scored

CVE-2026-46072: ntfs3: add buffer boundary checks to run_unpack()

In the Linux kernel, the following vulnerability has been resolved: ntfs3: add buffer boundary checks to run_unpack() run_unpack() checks `run_buf < run_last` at the top of the while loop but then reads size_size and offset_size bytes via run_unpack_s64() without verifying they fit within the remaining buffer. A crafted NTFS image with truncated run data in an MFT attribute triggers an OOB heap read of up to 15 bytes when the filesystem is mounted. Add boundary checks before each run_unpack_s64() call to ensure the declared field size does not exceed the remaining buffer. Found by fuzzing with a source-patched harness (LibAFL + QEMU).

Published May 27, 2026 · Updated Jun 14, 2026

Unknown · CVSS Not scored

CVE-2026-46068: crypto: nx - fix bounce buffer leaks in nx842_crypto_{alloc,free}_ctx

In the Linux kernel, the following vulnerability has been resolved: crypto: nx - fix bounce buffer leaks in nx842_crypto_{alloc,free}_ctx The bounce buffers are allocated with __get_free_pages() using BOUNCE_BUFFER_ORDER (order 2 = 4 pages), but both the allocation error path and nx842_crypto_free_ctx() release the buffers with free_page(). Use free_pages() with the matching order instead.

Published May 27, 2026 · Updated Jun 14, 2026

Unknown · CVSS Not scored

CVE-2026-46067: mm/damon/core: validate damos_quota_goal->nid for node_memcg_{used,free}_bp

In the Linux kernel, the following vulnerability has been resolved: mm/damon/core: validate damos_quota_goal->nid for node_memcg_{used,free}_bp Users can set damos_quota_goal->nid with arbitrary value for node_memcg_{used,free}_bp. But DAMON core is using those for NODE-DATA() without a validation of the value. This can result in out of bounds memory access. The issue can actually triggered using DAMON user-space tool (damo), like below. $ sudo mkdir /sys/fs/cgroup/foo $ sudo ./damo start --damos_action stat --damos_quota_interval 1s \ --damos_quota_goal node_memcg_used_bp 50% -1 /foo $ sudo dmseg [...] [ 524.181426] Unable to handle kernel paging request at virtual address 0000000000002c00 Fix this issue by adding the validation of the given node id. If an invalid node id is given, it returns 0% for used memory ratio, and 100% for free memory ratio.

Published May 27, 2026 · Updated Jun 14, 2026

Unknown · CVSS Not scored

CVE-2026-46063: x86/shstk: Prevent deadlock during shstk sigreturn

In the Linux kernel, the following vulnerability has been resolved: x86/shstk: Prevent deadlock during shstk sigreturn During sigreturn the shadow stack signal frame is popped. The kernel does this by reading the shadow stack using normal read accesses. When it can't assume the memory is shadow stack, it takes extra steps to makes sure it is reading actual shadow stack memory and not other normal readable memory. It does this by holding the mmap read lock while doing the access and checking the flags of the VMA. Unfortunately that is not safe. If the read of the shadow stack sigframe hits a page fault, the fault handler will try to recursively grab another mmap read lock. This normally works ok, but if a writer on another CPU is also waiting, the second read lock could fail and cause a deadlock. Fix this by not holding mmap lock during the read access to userspace. Instead use mmap_lock_speculate_...() to watch for changes between dropping mmap lock and the userspace access. Retry if anything grabbed an mmap write lock in between and could have changed the VMA. These mmap_lock_speculate_...() helpers use mm::mm_lock_seq, which is only available when PER_VMA_LOCK is configured. So make X86_USER_SHADOW_STACK depend on it. On x86, PER_VMA_LOCK is a default configuration for SMP kernels. So drop support for the other configs under the assumption that the !SMP shadow stack user base does not exist. Currently there is a check that skips the lookup work when the SSP can be assumed to be on a shadow stack. While reorganizing the function, remove the optimization to make the tricky code flows more common, such that issues like this cannot escape detection for so long.

Published May 27, 2026 · Updated Jun 14, 2026

Unknown · CVSS Not scored

CVE-2026-46061: jbd2: fix deadlock in jbd2_journal_cancel_revoke()

In the Linux kernel, the following vulnerability has been resolved: jbd2: fix deadlock in jbd2_journal_cancel_revoke() Commit f76d4c28a46a ("fs/jbd2: use sleeping version of __find_get_block()") changed jbd2_journal_cancel_revoke() to use __find_get_block_nonatomic() which holds the folio lock instead of i_private_lock. This breaks the lock ordering (folio -> buffer) and causes an ABBA deadlock when the filesystem blocksize < pagesize: T1 T2 ext4_mkdir() ext4_init_new_dir() ext4_append() ext4_getblk() lock_buffer() <- A sync_blockdev() blkdev_writepages() writeback_iter() writeback_get_folio() folio_lock() <- B ext4_journal_get_create_access() jbd2_journal_cancel_revoke() __find_get_block_nonatomic() folio_lock() <- B block_write_full_folio() lock_buffer() <- A This can occasionally cause generic/013 to hang. Fix by only calling __find_get_block_nonatomic() when the passed buffer_head doesn't belong to the bdev, which is the only case that we need to look up its bdev alias. Otherwise, the lookup is redundant since the found buffer_head is equal to the one we passed in.

Published May 27, 2026 · Updated Jun 14, 2026

Unknown · CVSS Not scored

CVE-2026-46060: crypto: qat - fix IRQ cleanup on 6xxx probe failure

In the Linux kernel, the following vulnerability has been resolved: crypto: qat - fix IRQ cleanup on 6xxx probe failure When adf_dev_up() partially completes and then fails, the IRQ handlers registered during adf_isr_resource_alloc() are not detached before the MSI-X vectors are released. Since the device is enabled with pcim_enable_device(), calling pci_alloc_irq_vectors() internally registers pcim_msi_release() as a devres action. On probe failure, devres runs pcim_msi_release() which calls pci_free_irq_vectors(), tearing down the MSI-X vectors while IRQ handlers (for example 'qat0-bundle0') are still attached. This causes remove_proc_entry() warnings: [ 22.163964] remove_proc_entry: removing non-empty directory 'irq/143', leaking at least 'qat0-bundle0' Moving the devm_add_action_or_reset() before adf_dev_up() does not solve the problem since devres runs in LIFO order and pcim_msi_release(), registered later inside adf_dev_up(), would still fire before adf_device_down(). Fix by calling adf_dev_down() explicitly when adf_dev_up() fails, to properly free IRQ handlers before devres releases the MSI-X vectors.

Published May 27, 2026 · Updated Jun 14, 2026

Unknown · CVSS Not scored

CVE-2026-46057: landlock: Fix LOG_SUBDOMAINS_OFF inheritance across fork()

In the Linux kernel, the following vulnerability has been resolved: landlock: Fix LOG_SUBDOMAINS_OFF inheritance across fork() hook_cred_transfer() only copies the Landlock security blob when the source credential has a domain. This is inconsistent with landlock_restrict_self() which can set LOG_SUBDOMAINS_OFF on a credential without creating a domain (via the ruleset_fd=-1 path): the field is committed but not preserved across fork() because the child's prepare_creds() calls hook_cred_transfer() which skips the copy when domain is NULL. This breaks the documented use case where a process mutes subdomain logs before forking sandboxed children: the children lose the muting and their domains produce unexpected audit records. Fix this by unconditionally copying the Landlock credential blob.

Published May 27, 2026 · Updated Jun 14, 2026

Unknown · CVSS Not scored

CVE-2026-46049: ALSA: ctxfi: Add fallback to default RSR for S/PDIF

In the Linux kernel, the following vulnerability has been resolved: ALSA: ctxfi: Add fallback to default RSR for S/PDIF spdif_passthru_playback_get_resources() uses atc->pll_rate as the RSR for the MSR calculation loop. However, pll_rate is only updated in atc_pll_init() and not in hw_pll_init(), so it remains 0 after the card init. When spdif_passthru_playback_setup() skips atc_pll_init() for 32000 Hz, (rsr * desc.msr) always becomes 0, causing the loop to spin indefinitely. Add fallback to use atc->rsr when atc->pll_rate is 0. This reflects the hardware state, since hw_card_init() already configures the PLL to the default RSR.

Published May 27, 2026 · Updated Jun 14, 2026

Unknown · CVSS Not scored

CVE-2026-46048: ALSA: caiaq: fix usb_dev refcount leak on probe failure

In the Linux kernel, the following vulnerability has been resolved: ALSA: caiaq: fix usb_dev refcount leak on probe failure create_card() takes a reference on the USB device with usb_get_dev() and stores the matching usb_put_dev() in card_free(), which is installed as the snd_card's ->private_free destructor. However, ->private_free is only assigned near the end of init_card(), after several failure points (usb_set_interface(), EP type checks, usb_submit_urb(), the EP1_CMD_GET_DEVICE_INFO exchange, and its timeout). When any of those fail, init_card() returns an error to snd_probe(), which calls snd_card_free(card). Because ->private_free is still NULL, card_free() never runs, the usb_get_dev() reference is not dropped, and the struct usb_device leaks along with its descriptor allocations and device_private. syzbot reproduces this with a malformed UAC3 device whose only valid altsetting is 0; init_card()'s usb_set_interface(usb_dev, 0, 1) call fails with -EIO and triggers the leak. Move the ->private_free assignment into create_card(), immediately after usb_get_dev(), so that every error path reaching snd_card_free() balances the reference. card_free()'s callees (snd_usb_caiaq_input_free, free_urbs, kfree) already tolerate the partially-initialized state because the chip private area is zero-initialized by snd_card_new().

Published May 27, 2026 · Updated Jun 14, 2026

Unknown · CVSS Not scored

CVE-2026-46045: md/md-llbitmap: skip reading rdevs that are not in_sync

In the Linux kernel, the following vulnerability has been resolved: md/md-llbitmap: skip reading rdevs that are not in_sync When reading bitmap pages from member disks, the code iterates through all rdevs and attempts to read from the first available one. However, it only checks for raid_disk assignment and Faulty flag, missing the In_sync flag check. This can cause bitmap data to be read from spare disks that are still being rebuilt and don't have valid bitmap information yet. Reading stale or uninitialized bitmap data from such disks can lead to incorrect dirty bit tracking, potentially causing data corruption during recovery or normal operation. Add the In_sync flag check to ensure bitmap pages are only read from fully synchronized member disks that have valid bitmap data.

Published May 27, 2026 · Updated Jun 14, 2026

Unknown · CVSS Not scored

CVE-2026-46042: mm/mempolicy: fix memory leaks in weighted_interleave_auto_store()

In the Linux kernel, the following vulnerability has been resolved: mm/mempolicy: fix memory leaks in weighted_interleave_auto_store() weighted_interleave_auto_store() fetches old_wi_state inside the if (!input) block only. This causes two memory leaks: 1. When a user writes "false" and the current mode is already manual, the function returns early without freeing the freshly allocated new_wi_state. 2. When a user writes "true", old_wi_state stays NULL because the fetch is skipped entirely. The old state is then overwritten by rcu_assign_pointer() but never freed, since the cleanup path is gated on old_wi_state being non-NULL. A user can trigger this repeatedly by writing "1" in a loop. Fix both leaks by moving the old_wi_state fetch before the input check, making it unconditional. This also allows a unified early return for both "true" and "false" when the requested mode matches the current mode. Reviewed by: Donet Tom <donettom@linux.ibm.com>

Published May 27, 2026 · Updated Jun 14, 2026

Unknown · CVSS Not scored

CVE-2026-46041: greybus: gb-beagleplay: fix sleep in atomic context in hdlc_tx_frames()

In the Linux kernel, the following vulnerability has been resolved: greybus: gb-beagleplay: fix sleep in atomic context in hdlc_tx_frames() hdlc_append() calls usleep_range() to wait for circular buffer space, but it is called with tx_producer_lock (a spinlock) held via hdlc_tx_frames() -> hdlc_append_tx_frame()/hdlc_append_tx_u8()/etc. Sleeping while holding a spinlock is illegal and can trigger "BUG: scheduling while atomic". Fix this by moving the buffer-space wait out of hdlc_append() and into hdlc_tx_frames(), before the spinlock is acquired. The new flow: 1. Pre-calculate the worst-case encoded frame length. 2. Wait (with sleep) outside the lock until enough space is available, kicking the TX consumer work to drain the buffer. 3. Acquire the spinlock, re-verify space, and write the entire frame atomically. This ensures that sleeping only happens without any lock held, and that frames are either fully enqueued or not written at all. This bug is found by CodeQL static analysis tool (interprocedural sleep-in-atomic query) and my code review.

Published May 27, 2026 · Updated Jun 14, 2026

Unknown · CVSS Not scored

CVE-2026-46035: mm/page_alloc: return NULL early from alloc_frozen_pages_nolock() in NMI on UP

In the Linux kernel, the following vulnerability has been resolved: mm/page_alloc: return NULL early from alloc_frozen_pages_nolock() in NMI on UP On UP kernels (!CONFIG_SMP), spin_trylock() is a no-op that unconditionally succeeds even when the lock is already held. As a result, alloc_frozen_pages_nolock() called from NMI context can re-enter rmqueue() and acquire the zone lock that the interrupted context is already holding, corrupting the freelists. With CONFIG_DEBUG_SPINLOCK on UP, the following BUG is triggered with the slub_kunit test module: BUG: spinlock trylock failure on UP on CPU#0, kunit_try_catch/243 [...] Call Trace: <NMI> dump_stack_lvl+0x3f/0x60 do_raw_spin_trylock+0x41/0x50 _raw_spin_trylock+0x24/0x50 rmqueue.isra.0+0x2a9/0xa70 get_page_from_freelist+0xeb/0x450 alloc_frozen_pages_nolock_noprof+0x111/0x1e0 allocate_slab+0x42a/0x500 ___slab_alloc+0xa7/0x4c0 kmalloc_nolock_noprof+0x164/0x310 [...] </NMI> Fix this by returning NULL early when invoked from NMI on a UP kernel.

Published May 27, 2026 · Updated Jun 14, 2026

Unknown · CVSS Not scored

CVE-2026-46034: vfio/cdx: Fix NULL pointer dereference in interrupt trigger path

In the Linux kernel, the following vulnerability has been resolved: vfio/cdx: Fix NULL pointer dereference in interrupt trigger path Add validation to ensure MSI is configured before accessing cdx_irqs array in vfio_cdx_set_msi_trigger(). Without this check, userspace can trigger a NULL pointer dereference by calling VFIO_DEVICE_SET_IRQS with VFIO_IRQ_SET_DATA_BOOL or VFIO_IRQ_SET_DATA_NONE flags before ever setting up interrupts via VFIO_IRQ_SET_DATA_EVENTFD. The vfio_cdx_msi_enable() function allocates the cdx_irqs array and sets config_msi to 1 only when called through the EVENTFD path. The trigger loop (for DATA_BOOL/DATA_NONE) assumed this had already been done, but there was no enforcement of this call ordering. This matches the protection used in the PCI VFIO driver where vfio_pci_set_msi_trigger() checks irq_is() before the trigger loop.

Published May 27, 2026 · Updated Jun 14, 2026

Unknown · CVSS Not scored

CVE-2026-46030: EDAC/versalnet: Fix device_node leak in mc_probe()

In the Linux kernel, the following vulnerability has been resolved: EDAC/versalnet: Fix device_node leak in mc_probe() of_parse_phandle() returns a device_node reference that must be released with of_node_put(). The original code never freed r5_core_node on any exit path, causing a memory leak. Fix this by using the automatic cleanup attribute __free(device_node) which ensures of_node_put() is called when the variable goes out of scope.

Published May 27, 2026 · Updated Jun 14, 2026

Unknown · CVSS Not scored

CVE-2026-46028: crypto: algif_aead - snapshot IV for async AEAD requests

In the Linux kernel, the following vulnerability has been resolved: crypto: algif_aead - snapshot IV for async AEAD requests AF_ALG AEAD AIO requests currently use the socket-wide IV buffer during request processing. For async requests, later socket activity can update that shared state before the original request has fully completed, which can lead to inconsistent IV handling. Snapshot the IV into per-request storage when preparing the AEAD request, so in-flight operations no longer depend on mutable socket state.

Published May 27, 2026 · Updated Jun 14, 2026

Unknown · CVSS Not scored

CVE-2026-46025: mm/damon/core: fix damon_call() vs kdamond_fn() exit race

In the Linux kernel, the following vulnerability has been resolved: mm/damon/core: fix damon_call() vs kdamond_fn() exit race Patch series "mm/damon/core: fix damon_call()/damos_walk() vs kdmond exit race". damon_call() and damos_walk() can leak memory and/or deadlock when they race with kdamond terminations. Fix those. This patch (of 2); When kdamond_fn() main loop is finished, the function cancels all remaining damon_call() requests and unset the damon_ctx->kdamond so that API callers and API functions themselves can know the context is terminated. damon_call() adds the caller's request to the queue first. After that, it shows if the kdamond of the damon_ctx is still running (damon_ctx->kdamond is set). Only if the kdamond is running, damon_call() starts waiting for the kdamond's handling of the newly added request. The damon_call() requests registration and damon_ctx->kdamond unset are protected by different mutexes, though. Hence, damon_call() could race with damon_ctx->kdamond unset, and result in deadlocks. For example, let's suppose kdamond successfully finished the damon_call() requests cancelling. Right after that, damon_call() is called for the context. It registers the new request, and shows the context is still running, because damon_ctx->kdamond unset is not yet done. Hence the damon_call() caller starts waiting for the handling of the request. However, the kdamond is already on the termination steps, so it never handles the new request. As a result, the damon_call() caller threads infinitely waits. Fix this by introducing another damon_ctx field, namely call_controls_obsolete. It is protected by the damon_ctx->call_controls_lock, which protects damon_call() requests registration. Initialize (unset) it in kdamond_fn() before letting damon_start() returns and set it just before the cancelling of remaining damon_call() requests is executed. damon_call() reads the obsolete field under the lock and avoids adding a new request. After this change, only requests that are guaranteed to be handled or cancelled are registered. Hence the after-registration DAMON context termination check is no longer needed. Remove it together. Note that the deadlock will not happen when damon_call() is called for repeat mode request. In tis case, damon_call() returns instead of waiting for the handling when the request registration succeeds and it shows the kdamond is running. However, if the request also has dealloc_on_cancel, the request memory would be leaked. The issue is found by sashiko [1].

Published May 27, 2026 · Updated Jun 14, 2026

Unknown · CVSS Not scored

CVE-2026-46020: mm/damon/core: validate damos_quota_goal->nid for node_mem_{used,free}_bp

In the Linux kernel, the following vulnerability has been resolved: mm/damon/core: validate damos_quota_goal->nid for node_mem_{used,free}_bp Patch series "mm/damon/core: validate damos_quota_goal->nid". node_mem[cg]_{used,free}_bp DAMOS quota goals receive the node id. The node id is used for si_meminfo_node() and NODE_DATA() without proper validation. As a result, privileged users can trigger an out of bounds memory access using DAMON_SYSFS. Fix the issues. The issue was originally reported [1] with a fix by another author. The original author announced [2] that they will stop working including the fix that was still in the review stage. Hence I'm restarting this. This patch (of 2): Users can set damos_quota_goal->nid with arbitrary value for node_mem_{used,free}_bp. But DAMON core is using those for si_meminfo_node() without the validation of the value. This can result in out of bounds memory access. The issue can actually triggered using DAMON user-space tool (damo), like below. $ sudo ./damo start --damos_action stat \ --damos_quota_goal node_mem_used_bp 50% -1 \ --damos_quota_interval 1s $ sudo dmesg [...] [ 65.565986] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000098 Fix this issue by adding the validation of the given node. If an invalid node id is given, it returns 0% for used memory ratio, and 100% for free memory ratio.

Published May 27, 2026 · Updated Jun 14, 2026

Unknown · CVSS Not scored

CVE-2026-46019: crypto: atmel-aes - Fix 3-page memory leak in atmel_aes_buff_cleanup

In the Linux kernel, the following vulnerability has been resolved: crypto: atmel-aes - Fix 3-page memory leak in atmel_aes_buff_cleanup atmel_aes_buff_init() allocates 4 pages using __get_free_pages() with ATMEL_AES_BUFFER_ORDER, but atmel_aes_buff_cleanup() frees only the first page using free_page(), leaking the remaining 3 pages. Use free_pages() with ATMEL_AES_BUFFER_ORDER to fix the memory leak.

Published May 27, 2026 · Updated Jun 14, 2026

Unknown · CVSS Not scored

CVE-2026-46017: mm: fix deferred split queue races during migration

In the Linux kernel, the following vulnerability has been resolved: mm: fix deferred split queue races during migration migrate_folio_move() records the deferred split queue state from src and replays it on dst. Replaying it after remove_migration_ptes(src, dst, 0) makes dst visible before it is requeued, so a concurrent rmap-removal path can mark dst partially mapped and trip the WARN in deferred_split_folio(). Move the requeue before remove_migration_ptes() so dst is back on the deferred split queue before it becomes visible again. Because migration still holds dst locked at that point, teach deferred_split_scan() to requeue a folio when folio_trylock() fails. Otherwise a fully mapped underused folio can be dequeued by the shrinker and silently lost from split_queue. [ziy@nvidia.com: move the comment]

Published May 27, 2026 · Updated Jun 14, 2026

Unknown · CVSS Not scored

CVE-2026-46013: mm/memfd_luo: fix physical address conversion in put_folios cleanup

In the Linux kernel, the following vulnerability has been resolved: mm/memfd_luo: fix physical address conversion in put_folios cleanup In memfd_luo_retrieve_folios()'s put_folios cleanup path: 1. kho_restore_folio() expects a phys_addr_t (physical address) but receives a raw PFN (pfolio->pfn). This causes kho_restore_page() to check the wrong physical address (pfn << PAGE_SHIFT instead of the actual physical address). 2. This loop lacks the !pfolio->pfn check that exists in the main retrieval loop and memfd_luo_discard_folios(), which could incorrectly process sparse file holes where pfn=0. Fix by converting PFN to physical address with PFN_PHYS() and adding the !pfolio->pfn check, matching the pattern used elsewhere in this file. This issue was identified by the AI review. https://sashiko.dev/#/patchset/20260323110747.193569-1-duanchenghao@kylinos.cn

Published May 27, 2026 · Updated Jun 14, 2026

Unknown · CVSS Not scored

CVE-2026-46012: rxrpc: Fix memory leaks in rxkad_verify_response()

In the Linux kernel, the following vulnerability has been resolved: rxrpc: Fix memory leaks in rxkad_verify_response() Fix rxkad_verify_response() to free the ticket and the server key under all circumstances by initialising the ticket pointer to NULL and then making all paths through the function after the first allocation has been done go through a single common epilogue that just releases everything - where all the releases skip on a NULL pointer.

Published May 27, 2026 · Updated Jun 14, 2026

Unknown · CVSS Not scored

CVE-2026-46009: PCI: endpoint: pci-epf-ntb: Remove duplicate resource teardown

In the Linux kernel, the following vulnerability has been resolved: PCI: endpoint: pci-epf-ntb: Remove duplicate resource teardown epf_ntb_epc_destroy() duplicates the teardown that the caller is supposed to do later. This leads to an oops when .allow_link fails or when .drop_link is performed. Remove the helper. Also drop pci_epc_put(). EPC device refcounting is tied to configfs EPC group lifetime, and pci_epc_put() in the .drop_link path is sufficient.

Published May 27, 2026 · Updated Jun 14, 2026

Unknown · CVSS Not scored

CVE-2026-46007: hwmon: (powerz) Avoid cacheline sharing for DMA buffer

In the Linux kernel, the following vulnerability has been resolved: hwmon: (powerz) Avoid cacheline sharing for DMA buffer Depending on the architecture the transfer buffer may share a cacheline with the following mutex. As the buffer may be used for DMA, that is problematic. Use the high-level DMA helpers to make sure that cacheline sharing can not happen. Also drop the comment, as the helpers are documentation enough. https://sashiko.dev/#/message/20260408175814.934BFC19421%40smtp.kernel.org

Published May 27, 2026 · Updated Jun 14, 2026

Unknown · CVSS Not scored

CVE-2026-46005: xfs: fix a resource leak in xfs_alloc_buftarg()

In the Linux kernel, the following vulnerability has been resolved: xfs: fix a resource leak in xfs_alloc_buftarg() In the error path, call fs_put_dax() to drop the DAX device reference.

Published May 27, 2026 · Updated Jun 14, 2026

Unknown · CVSS Not scored

CVE-2026-46004: ALSA: caiaq: Handle probe errors properly

In the Linux kernel, the following vulnerability has been resolved: ALSA: caiaq: Handle probe errors properly The probe procedure of setup_card() in caiaq driver doesn't treat the error cases gracefully, e.g. the error from snd_card_register() calls snd_card_free() but continues. This would lead to a UAF for the further calls like snd_usb_caiaq_control_init(), as Berk suggested in another patch in the link below. However, the problem is not only that; in general, this function drops the all error handlings (as it's a void function) although its caller can propagate an error to snd_probe(), which eventually calls snd_card_free() as a proper error path. That said, we should treat each error case in setup_card(), and just return the error code promptly, which is then handled later as a fatal error in snd_probe(). This patch achieves it by changing the setup_card() to return an error code. Also, the superfluous snd_card_free() call is removed, too. Note that card->private_free can be set still safely at returning an error. All called functions in card_free() have checks of the unassigned resources or NULL checks.

Published May 27, 2026 · Updated Jun 14, 2026

Unknown · CVSS Not scored

CVE-2026-46002: ext2: reject inodes with zero i_nlink and valid mode in ext2_iget()

In the Linux kernel, the following vulnerability has been resolved: ext2: reject inodes with zero i_nlink and valid mode in ext2_iget() ext2_iget() already rejects inodes with i_nlink == 0 when i_mode is zero or i_dtime is set, treating them as deleted. However, the case of i_nlink == 0 with a non-zero mode and zero dtime slips through. Since ext2 has no orphan list, such a combination can only result from filesystem corruption - a legitimate inode deletion always sets either i_dtime or clears i_mode before freeing the inode. A crafted image can exploit this gap to present such an inode to the VFS, which then triggers WARN_ON inside drop_nlink() (fs/inode.c) via ext2_unlink(), ext2_rename() and ext2_rmdir(): WARNING: CPU: 3 PID: 609 at fs/inode.c:336 drop_nlink+0xad/0xd0 fs/inode.c:336 CPU: 3 UID: 0 PID: 609 Comm: syz-executor Not tainted 6.12.77+ #1 Call Trace: <TASK> inode_dec_link_count include/linux/fs.h:2518 [inline] ext2_unlink+0x26c/0x300 fs/ext2/namei.c:295 vfs_unlink+0x2fc/0x9b0 fs/namei.c:4477 do_unlinkat+0x53e/0x730 fs/namei.c:4541 __x64_sys_unlink+0xc6/0x110 fs/namei.c:4587 do_syscall_64+0xf5/0x220 arch/x86/entry/common.c:78 entry_SYSCALL_64_after_hwframe+0x77/0x7f </TASK> WARNING: CPU: 0 PID: 646 at fs/inode.c:336 drop_nlink+0xad/0xd0 fs/inode.c:336 CPU: 0 UID: 0 PID: 646 Comm: syz.0.17 Not tainted 6.12.77+ #1 Call Trace: <TASK> inode_dec_link_count include/linux/fs.h:2518 [inline] ext2_rename+0x35e/0x850 fs/ext2/namei.c:374 vfs_rename+0xf2f/0x2060 fs/namei.c:5021 do_renameat2+0xbe2/0xd50 fs/namei.c:5178 __x64_sys_rename+0x7e/0xa0 fs/namei.c:5223 do_syscall_64+0xf5/0x220 arch/x86/entry/common.c:78 entry_SYSCALL_64_after_hwframe+0x77/0x7f </TASK> WARNING: CPU: 0 PID: 634 at fs/inode.c:336 drop_nlink+0xad/0xd0 fs/inode.c:336 CPU: 0 UID: 0 PID: 634 Comm: syz-executor Not tainted 6.12.77+ #1 Call Trace: <TASK> inode_dec_link_count include/linux/fs.h:2518 [inline] ext2_rmdir+0xca/0x110 fs/ext2/namei.c:311 vfs_rmdir+0x204/0x690 fs/namei.c:4348 do_rmdir+0x372/0x3e0 fs/namei.c:4407 __x64_sys_unlinkat+0xf0/0x130 fs/namei.c:4577 do_syscall_64+0xf5/0x220 arch/x86/entry/common.c:78 entry_SYSCALL_64_after_hwframe+0x77/0x7f </TASK> Extend the existing i_nlink == 0 check to also catch this case, reporting the corruption via ext2_error() and returning -EFSCORRUPTED. This rejects the inode at load time and prevents it from reaching any of the namei.c paths. Found by Linux Verification Center (linuxtesting.org) with Syzkaller.

Published May 27, 2026 · Updated Jun 14, 2026

Unknown · CVSS Not scored

CVE-2026-46001: hwmon: (pt5161l) Fix bugs in pt5161l_read_block_data()

In the Linux kernel, the following vulnerability has been resolved: hwmon: (pt5161l) Fix bugs in pt5161l_read_block_data() Fix two bugs in pt5161l_read_block_data(): 1. Buffer overrun: The local buffer rbuf is declared as u8 rbuf[24], but i2c_smbus_read_block_data() can return up to I2C_SMBUS_BLOCK_MAX (32) bytes. The i2c-core copies the data into the caller's buffer before the return value can be checked, so the post-read length validation does not prevent a stack overrun if a device returns more than 24 bytes. Resize the buffer to I2C_SMBUS_BLOCK_MAX. 2. Unexpected positive return on length mismatch: When all three retries are exhausted because the device returns data with an unexpected length, i2c_smbus_read_block_data() returns a positive byte count. The function returns this directly, and callers treat any non-negative return as success, processing stale or incomplete buffer contents. Return -EIO when retries are exhausted with a positive return value, preserving the negative error code on I2C failure.

Published May 27, 2026 · Updated Jun 14, 2026

Unknown · CVSS Not scored

CVE-2026-46000: rxrpc: Fix conn-level packet handling to unshare RESPONSE packets

In the Linux kernel, the following vulnerability has been resolved: rxrpc: Fix conn-level packet handling to unshare RESPONSE packets The security operations that verify the RESPONSE packets decrypt bits of it in place - however, the sk_buff may be shared with a packet sniffer, which would lead to the sniffer seeing an apparently corrupt packet (actually decrypted). Fix this by handing a copy of the packet off to the specific security handler if the packet was cloned.

Published May 27, 2026 · Updated Jun 14, 2026

Unknown · CVSS Not scored

CVE-2026-45996: spi: imx: fix use-after-free on unbind

In the Linux kernel, the following vulnerability has been resolved: spi: imx: fix use-after-free on unbind The SPI subsystem frees the controller and any subsystem allocated driver data as part of deregistration (unless the allocation is device managed). Take another reference before deregistering the controller so that the driver data is not freed until the driver is done with it.

Published May 27, 2026 · Updated Jun 14, 2026

Unknown · CVSS Not scored

CVE-2026-45995: io_uring/zcrx: fix user_struct uaf

In the Linux kernel, the following vulnerability has been resolved: io_uring/zcrx: fix user_struct uaf io_free_rbuf_ring() usees a struct user_struct, which io_zcrx_ifq_free() puts it down before destroying the ring.

Published May 27, 2026 · Updated Jun 14, 2026

Unknown · CVSS Not scored

CVE-2026-45994: ibmasm: fix OOB reads in command_file_write due to missing size checks

In the Linux kernel, the following vulnerability has been resolved: ibmasm: fix OOB reads in command_file_write due to missing size checks The command_file_write() handler allocates a kernel buffer of exactly count bytes and copies user data into it, but does not validate the buffer against the dot command protocol before passing it to get_dot_command_size() and get_dot_command_timeout(). Since both the allocation size (count) and the header fields (command_size, data_size) are independently user-controlled, an attacker can cause get_dot_command_size() to return a value exceeding the allocation, triggering OOB reads in get_dot_command_timeout() and an out-of-bounds memcpy_toio() that leaks kernel heap memory to the service processor. Fix with two guards: reject writes smaller than sizeof(struct dot_command_header) before allocation, then after copying user data reject commands where the buffer is smaller than the total size declared by the header (sizeof(header) + command_size + data_size). This ensures all subsequent header and payload field accesses stay within the buffer.

Published May 27, 2026 · Updated Jun 14, 2026

Unknown · CVSS Not scored

CVE-2026-45993: LoongArch: Add spectre boundry for syscall dispatch table

In the Linux kernel, the following vulnerability has been resolved: LoongArch: Add spectre boundry for syscall dispatch table The LoongArch syscall number is directly controlled by userspace, but does not have a array_index_nospec() boundry to prevent access past the syscall function pointer tables.

Published May 27, 2026 · Updated Jun 14, 2026

Unknown · CVSS Not scored

CVE-2026-45990: slub: fix data loss and overflow in krealloc()

In the Linux kernel, the following vulnerability has been resolved: slub: fix data loss and overflow in krealloc() Commit 2cd8231796b5 ("mm/slub: allow to set node and align in k[v]realloc") introduced the ability to force a reallocation if the original object does not satisfy new alignment or NUMA node, even when the object is being shrunk. This introduced two bugs in the reallocation fallback path: 1. Data loss during NUMA migration: The jump to 'alloc_new' happens before 'ks' and 'orig_size' are initialized. As a result, the memcpy() in the 'alloc_new' block would copy 0 bytes into the new allocation. 2. Buffer overflow during shrinking: When shrinking an object while forcing a new alignment, 'new_size' is smaller than the old size. However, the memcpy() used the old size ('orig_size ?: ks'), leading to an out-of-bounds write. The same overflow bug exists in the kvrealloc() fallback path, where the old bucket size ksize(p) is copied into the new buffer without being bounded by the new size. A simple reproducer: // e.g. add to lkdtm as KREALLOC_SHRINK_OVERFLOW while (1) { void *p = kmalloc(128, GFP_KERNEL); p = krealloc_node_align(p, 64, 256, GFP_KERNEL, NUMA_NO_NODE); kfree(p); } demonstrates the issue: ================================================================== BUG: KFENCE: out-of-bounds write in memcpy_orig+0x68/0x130 Out-of-bounds write at 0xffff8883ad757038 (120B right of kfence-#47): memcpy_orig+0x68/0x130 krealloc_node_align_noprof+0x1c8/0x340 lkdtm_KREALLOC_SHRINK_OVERFLOW+0x8c/0xc0 [lkdtm] lkdtm_do_action+0x3a/0x60 [lkdtm] ... kfence-#47: 0xffff8883ad756fc0-0xffff8883ad756fff, size=64, cache=kmalloc-64 allocated by task 316 on cpu 7 at 97.680481s (0.021813s ago): krealloc_node_align_noprof+0x19c/0x340 lkdtm_KREALLOC_SHRINK_OVERFLOW+0x8c/0xc0 [lkdtm] lkdtm_do_action+0x3a/0x60 [lkdtm] ... ================================================================== Fix it by moving the old size calculation to the top of __do_krealloc() and bounding all copy lengths by the new allocation size.

Published May 27, 2026 · Updated Jun 14, 2026

Unknown · CVSS Not scored

CVE-2026-45989: of: unittest: fix use-after-free in testdrv_probe()

In the Linux kernel, the following vulnerability has been resolved: of: unittest: fix use-after-free in testdrv_probe() The function testdrv_probe() retrieves the device_node from the PCI device, applies an overlay, and then immediately calls of_node_put(dn). This releases the reference held by the PCI core, potentially freeing the node if the reference count drops to zero. Later, the same freed pointer 'dn' is passed to of_platform_default_populate(), leading to a use-after-free. The reference to pdev->dev.of_node is owned by the device model and should not be released by the driver. Remove the erroneous of_node_put() to prevent premature freeing.

Published May 27, 2026 · Updated Jun 14, 2026

Unknown · CVSS Not scored

CVE-2026-45987: KVM: nSVM: Sync interrupt shadow to cached vmcb12 after VMRUN of L2

In the Linux kernel, the following vulnerability has been resolved: KVM: nSVM: Sync interrupt shadow to cached vmcb12 after VMRUN of L2 After VMRUN in guest mode, nested_sync_control_from_vmcb02() syncs fields written by the CPU from vmcb02 to the cached vmcb12. This is because the cached vmcb12 is used as the authoritative copy of some of the controls, and is the payload when saving/restoring nested state. int_state is also written by the CPU, specifically bit 0 (i.e. SVM_INTERRUPT_SHADOW_MASK) for nested VMs, but it is not sync'd to cached vmcb12. This does not cause a problem if KVM_SET_NESTED_STATE preceeds KVM_SET_VCPU_EVENTS in the restore path, as an interrupt shadow would be correctly restored to vmcb02 (KVM_SET_VCPU_EVENTS overwrites what KVM_SET_NESTED_STATE restored in int_state). However, if KVM_SET_VCPU_EVENTS preceeds KVM_SET_NESTED_STATE, an interrupt shadow would be restored into vmcb01 instead of vmcb02. This would mostly be benign for L1 (delays an interrupt), but not for L2. For L2, the vCPU could hang (e.g. if a wakeup interrupt is delivered before a HLT that should have been in an interrupt shadow). Sync int_state to the cached vmcb12 in nested_sync_control_from_vmcb02() to avoid this problem. With that, KVM_SET_NESTED_STATE restores the correct interrupt shadow state, and if KVM_SET_VCPU_EVENTS follows it would overwrite it with the same value.

Published May 27, 2026 · Updated Jun 14, 2026

Unknown · CVSS Not scored

CVE-2026-45986: crypto: ccree - fix a memory leak in cc_mac_digest()

In the Linux kernel, the following vulnerability has been resolved: crypto: ccree - fix a memory leak in cc_mac_digest() Add cc_unmap_result() if cc_map_hash_request_final() fails to prevent potential memory leak.

Published May 27, 2026 · Updated Jun 14, 2026

Unknown · CVSS Not scored

CVE-2026-45846: bareudp: fix NULL pointer dereference in bareudp_fill_metadata_dst()

In the Linux kernel, the following vulnerability has been resolved: bareudp: fix NULL pointer dereference in bareudp_fill_metadata_dst() bareudp_fill_metadata_dst() passes bareudp->sock to udp_tunnel6_dst_lookup() in the IPv6 path without a NULL check. The socket is only created in bareudp_open() and NULLed in bareudp_stop(), so calling this function while the device is down triggers a NULL dereference via sock->sk. BUG: kernel NULL pointer dereference, address: 0000000000000018 RIP: 0010:udp_tunnel6_dst_lookup (net/ipv6/ip6_udp_tunnel.c:160) Call Trace: <TASK> bareudp_fill_metadata_dst (drivers/net/bareudp.c:532) do_execute_actions (net/openvswitch/actions.c:901) ovs_execute_actions (net/openvswitch/actions.c:1589) ovs_packet_cmd_execute (net/openvswitch/datapath.c:700) genl_family_rcv_msg_doit (net/netlink/genetlink.c:1114) genl_rcv_msg (net/netlink/genetlink.c:1209) netlink_rcv_skb (net/netlink/af_netlink.c:2550) </TASK> Add a NULL check returning -ESHUTDOWN, consistent with the xmit paths in the same driver.

Published May 27, 2026 · Updated Jun 14, 2026

Unknown · CVSS Not scored

CVE-2026-45845: net/sched: taprio: fix NULL pointer dereference in class dump

In the Linux kernel, the following vulnerability has been resolved: net/sched: taprio: fix NULL pointer dereference in class dump When a TAPRIO child qdisc is deleted via RTM_DELQDISC, taprio_graft() is called with new == NULL and stores NULL into q->qdiscs[cl - 1]. Subsequent RTM_GETTCLASS dump operations walk all classes via taprio_walk() and call taprio_dump_class(), which calls taprio_leaf() returning the NULL pointer, then dereferences it to read child->handle, causing a kernel NULL pointer dereference. The bug is reachable with namespace-scoped CAP_NET_ADMIN on any kernel with CONFIG_NET_SCH_TAPRIO enabled. On systems with unprivileged user namespaces enabled, an unprivileged local user can trigger a kernel panic by creating a taprio qdisc inside a new network namespace, grafting an explicit child qdisc, deleting it, and requesting a class dump. The RTM_GETTCLASS dump itself requires no capability. Oops: general protection fault, probably for non-canonical address 0xdffffc0000000007: 0000 [#1] SMP KASAN NOPTI KASAN: null-ptr-deref in range [0x0000000000000038-0x000000000000003f] RIP: 0010:taprio_dump_class (net/sched/sch_taprio.c:2478) Call Trace: <TASK> tc_fill_tclass (net/sched/sch_api.c:1966) qdisc_class_dump (net/sched/sch_api.c:2326) taprio_walk (net/sched/sch_taprio.c:2514) tc_dump_tclass_qdisc (net/sched/sch_api.c:2352) tc_dump_tclass_root (net/sched/sch_api.c:2370) tc_dump_tclass (net/sched/sch_api.c:2431) rtnl_dumpit (net/core/rtnetlink.c:6864) netlink_dump (net/netlink/af_netlink.c:2325) rtnetlink_rcv_msg (net/core/rtnetlink.c:6959) netlink_rcv_skb (net/netlink/af_netlink.c:2550) </TASK> Fix this by substituting &noop_qdisc when new is NULL in taprio_graft(), a common pattern used by other qdiscs (e.g., multiq_graft()) to ensure the q->qdiscs[] slots are never NULL. This makes control-plane dump paths safe without requiring individual NULL checks. Since the data-plane paths (taprio_enqueue and taprio_dequeue_from_txq) previously had explicit NULL guards that would drop/skip the packet cleanly, update those checks to test for &noop_qdisc instead. Without this, packets would reach taprio_enqueue_one() which increments the root qdisc's qlen and backlog before calling the child's enqueue; noop_qdisc drops the packet but those counters are never rolled back, permanently inflating the root qdisc's statistics. After this change *old can be a valid qdisc, NULL, or &noop_qdisc. Only call qdisc_put(*old) in the first case to avoid decreasing noop_qdisc's refcount, which was never increased.

Published May 27, 2026 · Updated Jun 14, 2026

Unknown · CVSS Not scored

CVE-2026-45837: bpf: Fix use-after-free in arena_vm_close on fork

In the Linux kernel, the following vulnerability has been resolved: bpf: Fix use-after-free in arena_vm_close on fork arena_vm_open() only bumps vml->mmap_count but never registers the child VMA in arena->vma_list. The vml->vma always points at the parent VMA, so after parent munmap the pointer dangles. If the child then calls bpf_arena_free_pages(), zap_pages() reads the stale vml->vma triggering use-after-free. Fix this by preventing the arena VMA from being inherited across fork with VM_DONTCOPY, and preventing VMA splits via the may_split callback. Also reject mremap with a .mremap callback returning -EINVAL. A same-size mremap(MREMAP_FIXED) on the full arena VMA reaches copy_vma() through the following path: check_prep_vma() - returns 0 early: new_len == old_len skips VM_DONTEXPAND check prep_move_vma() - vm_start == old_addr and vm_end == old_addr + old_len so may_split is never called move_vma() copy_vma_and_data() copy_vma() vm_area_dup() - copies vm_private_data (vml pointer) vm_ops->open() - bumps vml->mmap_count vm_ops->mremap() - returns -EINVAL, rollback unmaps new VMA The refcount ensures the rollback's arena_vm_close does not free the vml shared with the original VMA.

Published May 27, 2026 · Updated Jun 14, 2026

Unknown · CVSS Not scored

CVE-2026-43349: f2fs: fix to avoid uninit-value access in f2fs_sanity_check_node_footer

In the Linux kernel, the following vulnerability has been resolved: f2fs: fix to avoid uninit-value access in f2fs_sanity_check_node_footer syzbot reported a f2fs bug as below: BUG: KMSAN: uninit-value in f2fs_sanity_check_node_footer+0x374/0xa20 fs/f2fs/node.c:1520 f2fs_sanity_check_node_footer+0x374/0xa20 fs/f2fs/node.c:1520 f2fs_finish_read_bio+0xe1e/0x1d60 fs/f2fs/data.c:177 f2fs_read_end_io+0x6ab/0x2220 fs/f2fs/data.c:-1 bio_endio+0x1006/0x1160 block/bio.c:1792 submit_bio_noacct+0x533/0x2960 block/blk-core.c:891 submit_bio+0x57a/0x620 block/blk-core.c:926 blk_crypto_submit_bio include/linux/blk-crypto.h:203 [inline] f2fs_submit_read_bio+0x12c/0x360 fs/f2fs/data.c:557 f2fs_submit_page_bio+0xee2/0x1450 fs/f2fs/data.c:775 read_node_folio+0x384/0x4b0 fs/f2fs/node.c:1481 __get_node_folio+0x5db/0x15d0 fs/f2fs/node.c:1576 f2fs_get_inode_folio+0x40/0x50 fs/f2fs/node.c:1623 do_read_inode fs/f2fs/inode.c:425 [inline] f2fs_iget+0x1209/0x9380 fs/f2fs/inode.c:596 f2fs_fill_super+0x8f5a/0xb2e0 fs/f2fs/super.c:5184 get_tree_bdev_flags+0x6e6/0x920 fs/super.c:1694 get_tree_bdev+0x38/0x50 fs/super.c:1717 f2fs_get_tree+0x35/0x40 fs/f2fs/super.c:5436 vfs_get_tree+0xb3/0x5d0 fs/super.c:1754 fc_mount fs/namespace.c:1193 [inline] do_new_mount_fc fs/namespace.c:3763 [inline] do_new_mount+0x885/0x1dd0 fs/namespace.c:3839 path_mount+0x7a2/0x20b0 fs/namespace.c:4159 do_mount fs/namespace.c:4172 [inline] __do_sys_mount fs/namespace.c:4361 [inline] __se_sys_mount+0x704/0x7f0 fs/namespace.c:4338 __x64_sys_mount+0xe4/0x150 fs/namespace.c:4338 x64_sys_call+0x39f0/0x3ea0 arch/x86/include/generated/asm/syscalls_64.h:166 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0x134/0xf80 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f The root cause is: in f2fs_finish_read_bio(), we may access uninit data in folio if we failed to read the data from device into folio, let's add a check condition to avoid such issue.

Published May 8, 2026 · Updated Jun 14, 2026

Unknown · CVSS Not scored

CVE-2026-43348: mshv_vtl: Fix vmemmap_shift exceeding MAX_FOLIO_ORDER

In the Linux kernel, the following vulnerability has been resolved: mshv_vtl: Fix vmemmap_shift exceeding MAX_FOLIO_ORDER When registering VTL0 memory via MSHV_ADD_VTL0_MEMORY, the kernel computes pgmap->vmemmap_shift as the number of trailing zeros in the OR of start_pfn and last_pfn, intending to use the largest compound page order both endpoints are aligned to. However, this value is not clamped to MAX_FOLIO_ORDER, so a sufficiently aligned range (e.g. physical range [0x800000000000, 0x800080000000), corresponding to start_pfn=0x800000000 with 35 trailing zeros) can produce a shift larger than what memremap_pages() accepts, triggering a WARN and returning -EINVAL: WARNING: ... memremap_pages+0x512/0x650 requested folio size unsupported The MAX_FOLIO_ORDER check was added by commit 646b67d57589 ("mm/memremap: reject unreasonable folio/compound page sizes in memremap_pages()"). Fix this by clamping vmemmap_shift to MAX_FOLIO_ORDER so we always request the largest order the kernel supports, in those cases, rather than an out-of-range value. Also fix the error path to propagate the actual error code from devm_memremap_pages() instead of hard-coding -EFAULT, which was masking the real -EINVAL return.

Published May 8, 2026 · Updated Jun 14, 2026

Unknown · CVSS Not scored

CVE-2026-43072: drm/vc4: platform_get_irq_byname() returns an int

In the Linux kernel, the following vulnerability has been resolved: drm/vc4: platform_get_irq_byname() returns an int platform_get_irq_byname() will return a negative value if an error happens, so it should be checked and not just passed directly into devm_request_threaded_irq() hoping all will be ok.

Published May 5, 2026 · Updated Jun 14, 2026

Unknown · CVSS Not scored

CVE-2026-43058: media: vidtv: fix pass-by-value structs causing MSAN warnings

In the Linux kernel, the following vulnerability has been resolved: media: vidtv: fix pass-by-value structs causing MSAN warnings vidtv_ts_null_write_into() and vidtv_ts_pcr_write_into() take their argument structs by value, causing MSAN to report uninit-value warnings. While only vidtv_ts_null_write_into() has triggered a report so far, both functions share the same issue. Fix by passing both structs by const pointer instead, avoiding the stack copy of the struct along with its MSAN shadow and origin metadata. The functions do not modify the structs, which is enforced by the const qualifier.

Published May 2, 2026 · Updated Jun 14, 2026

Unknown · CVSS Not scored

CVE-2026-31715: f2fs: fix UAF caused by decrementing sbi->nr_pages[] in f2fs_write_end_io()

In the Linux kernel, the following vulnerability has been resolved: f2fs: fix UAF caused by decrementing sbi->nr_pages[] in f2fs_write_end_io() The xfstests case "generic/107" and syzbot have both reported a NULL pointer dereference. The concurrent scenario that triggers the panic is as follows: F2FS_WB_CP_DATA write callback umount - f2fs_write_checkpoint - f2fs_wait_on_all_pages(sbi, F2FS_WB_CP_DATA) - blk_mq_end_request - bio_endio - f2fs_write_end_io : dec_page_count(sbi, F2FS_WB_CP_DATA) : wake_up(&sbi->cp_wait) - kill_f2fs_super - kill_block_super - f2fs_put_super : iput(sbi->node_inode) : sbi->node_inode = NULL : f2fs_in_warm_node_list - is_node_folio // sbi->node_inode is NULL and panic The root cause is that f2fs_put_super() calls iput(sbi->node_inode) and sets sbi->node_inode to NULL after sbi->nr_pages[F2FS_WB_CP_DATA] is decremented to zero. As a result, f2fs_in_warm_node_list() may dereference a NULL node_inode when checking whether a folio belongs to the node inode, leading to a panic. This patch fixes the issue by calling f2fs_in_warm_node_list() before decrementing sbi->nr_pages[F2FS_WB_CP_DATA], thus preventing the use-after-free condition.

Published May 1, 2026 · Updated Jun 14, 2026

Unknown · CVSS Not scored

CVE-2026-31714: f2fs: fix to avoid memory leak in f2fs_rename()

In the Linux kernel, the following vulnerability has been resolved: f2fs: fix to avoid memory leak in f2fs_rename() syzbot reported a f2fs bug as below: BUG: memory leak unreferenced object 0xffff888127f70830 (size 16): comm "syz.0.23", pid 6144, jiffies 4294943712 hex dump (first 16 bytes): 3c af 57 72 5b e6 8f ad 6e 8e fd 33 42 39 03 ff <.Wr[...n..3B9.. backtrace (crc 925f8a80): kmemleak_alloc_recursive include/linux/kmemleak.h:44 [inline] slab_post_alloc_hook mm/slub.c:4520 [inline] slab_alloc_node mm/slub.c:4844 [inline] __do_kmalloc_node mm/slub.c:5237 [inline] __kmalloc_noprof+0x3bd/0x560 mm/slub.c:5250 kmalloc_noprof include/linux/slab.h:954 [inline] fscrypt_setup_filename+0x15e/0x3b0 fs/crypto/fname.c:364 f2fs_setup_filename+0x52/0xb0 fs/f2fs/dir.c:143 f2fs_rename+0x159/0xca0 fs/f2fs/namei.c:961 f2fs_rename2+0xd5/0xf20 fs/f2fs/namei.c:1308 vfs_rename+0x7ff/0x1250 fs/namei.c:6026 filename_renameat2+0x4f4/0x660 fs/namei.c:6144 __do_sys_renameat2 fs/namei.c:6173 [inline] __se_sys_renameat2 fs/namei.c:6168 [inline] __x64_sys_renameat2+0x59/0x80 fs/namei.c:6168 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xe2/0xf80 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f The root cause is in commit 40b2d55e0452 ("f2fs: fix to create selinux label during whiteout initialization"), we added a call to f2fs_setup_filename() without a matching call to f2fs_free_filename(), fix it.

Published May 1, 2026 · Updated Jun 14, 2026