LiveActive security incident?Get immediate response
CVE archive

October 2022

Browse CVE records published in October 2022, with severity, affected products, CWE, KEV, and source-backed vulnerability context.

Showing 50 of 2112 matching CVEs · Page 3 of 43.

Unknown · CVSS Not scored

CVE-2022-48994: ALSA: seq: Fix function prototype mismatch in snd_seq_expand_var_event

In the Linux kernel, the following vulnerability has been resolved: ALSA: seq: Fix function prototype mismatch in snd_seq_expand_var_event With clang's kernel control flow integrity (kCFI, CONFIG_CFI_CLANG), indirect call targets are validated against the expected function pointer prototype to make sure the call target is valid to help mitigate ROP attacks. If they are not identical, there is a failure at run time, which manifests as either a kernel panic or thread getting killed. seq_copy_in_user() and seq_copy_in_kernel() did not have prototypes matching snd_seq_dump_func_t. Adjust this and remove the casts. There are not resulting binary output differences. This was found as a result of Clang's new -Wcast-function-type-strict flag, which is more sensitive than the simpler -Wcast-function-type, which only checks for type width mismatches.

Published Oct 21, 2024 · Updated May 11, 2026

Unknown · CVSS Not scored

CVE-2022-48992: ASoC: soc-pcm: Add NULL check in BE reparenting

In the Linux kernel, the following vulnerability has been resolved: ASoC: soc-pcm: Add NULL check in BE reparenting Add NULL check in dpcm_be_reparent API, to handle kernel NULL pointer dereference error. The issue occurred in fuzzing test.

Published Oct 21, 2024 · Updated May 11, 2026

Unknown · CVSS Not scored

CVE-2022-48991: mm/khugepaged: invoke MMU notifiers in shmem/file collapse paths

In the Linux kernel, the following vulnerability has been resolved: mm/khugepaged: invoke MMU notifiers in shmem/file collapse paths Any codepath that zaps page table entries must invoke MMU notifiers to ensure that secondary MMUs (like KVM) don't keep accessing pages which aren't mapped anymore. Secondary MMUs don't hold their own references to pages that are mirrored over, so failing to notify them can lead to page use-after-free. I'm marking this as addressing an issue introduced in commit f3f0e1d2150b ("khugepaged: add support of collapse for tmpfs/shmem pages"), but most of the security impact of this only came in commit 27e1f8273113 ("khugepaged: enable collapse pmd for pte-mapped THP"), which actually omitted flushes for the removal of present PTEs, not just for the removal of empty page tables.

Published Oct 21, 2024 · Updated May 11, 2026

Unknown · CVSS Not scored

CVE-2022-48990: drm/amdgpu: fix use-after-free during gpu recovery

In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: fix use-after-free during gpu recovery [Why] [ 754.862560] refcount_t: underflow; use-after-free. [ 754.862898] Call Trace: [ 754.862903] <TASK> [ 754.862913] amdgpu_job_free_cb+0xc2/0xe1 [amdgpu] [ 754.863543] drm_sched_main.cold+0x34/0x39 [amd_sched] [How] The fw_fence may be not init, check whether dma_fence_init is performed before job free

Published Oct 21, 2024 · Updated May 11, 2026

Unknown · CVSS Not scored

CVE-2022-48989: fscache: Fix oops due to race with cookie_lru and use_cookie

In the Linux kernel, the following vulnerability has been resolved: fscache: Fix oops due to race with cookie_lru and use_cookie If a cookie expires from the LRU and the LRU_DISCARD flag is set, but the state machine has not run yet, it's possible another thread can call fscache_use_cookie and begin to use it. When the cookie_worker finally runs, it will see the LRU_DISCARD flag set, transition the cookie->state to LRU_DISCARDING, which will then withdraw the cookie. Once the cookie is withdrawn the object is removed the below oops will occur because the object associated with the cookie is now NULL. Fix the oops by clearing the LRU_DISCARD bit if another thread uses the cookie before the cookie_worker runs. BUG: kernel NULL pointer dereference, address: 0000000000000008 ... CPU: 31 PID: 44773 Comm: kworker/u130:1 Tainted: G E 6.0.0-5.dneg.x86_64 #1 Hardware name: Google Compute Engine/Google Compute Engine, BIOS Google 08/26/2022 Workqueue: events_unbound netfs_rreq_write_to_cache_work [netfs] RIP: 0010:cachefiles_prepare_write+0x28/0x90 [cachefiles] ... Call Trace: netfs_rreq_write_to_cache_work+0x11c/0x320 [netfs] process_one_work+0x217/0x3e0 worker_thread+0x4a/0x3b0 kthread+0xd6/0x100

Published Oct 21, 2024 · Updated May 11, 2026

Unknown · CVSS Not scored

CVE-2022-48988: memcg: fix possible use-after-free in memcg_write_event_control()

In the Linux kernel, the following vulnerability has been resolved: memcg: fix possible use-after-free in memcg_write_event_control() memcg_write_event_control() accesses the dentry->d_name of the specified control fd to route the write call. As a cgroup interface file can't be renamed, it's safe to access d_name as long as the specified file is a regular cgroup file. Also, as these cgroup interface files can't be removed before the directory, it's safe to access the parent too. Prior to 347c4a874710 ("memcg: remove cgroup_event->cft"), there was a call to __file_cft() which verified that the specified file is a regular cgroupfs file before further accesses. The cftype pointer returned from __file_cft() was no longer necessary and the commit inadvertently dropped the file type check with it allowing any file to slip through. With the invarients broken, the d_name and parent accesses can now race against renames and removals of arbitrary files and cause use-after-free's. Fix the bug by resurrecting the file type check in __file_cft(). Now that cgroupfs is implemented through kernfs, checking the file operations needs to go through a layer of indirection. Instead, let's check the superblock and dentry type.

Published Oct 21, 2024 · Updated May 11, 2026

Unknown · CVSS Not scored

CVE-2022-48987: media: v4l2-dv-timings.c: fix too strict blanking sanity checks

In the Linux kernel, the following vulnerability has been resolved: media: v4l2-dv-timings.c: fix too strict blanking sanity checks Sanity checks were added to verify the v4l2_bt_timings blanking fields in order to avoid integer overflows when userspace passes weird values. But that assumed that userspace would correctly fill in the front porch, backporch and sync values, but sometimes all you know is the total blanking, which is then assigned to just one of these fields. And that can fail with these checks. So instead set a maximum for the total horizontal and vertical blanking and check that each field remains below that. That is still sufficient to avoid integer overflows, but it also allows for more flexibility in how userspace fills in these fields.

Published Oct 21, 2024 · Updated May 11, 2026

Unknown · CVSS Not scored

CVE-2022-48986: mm/gup: fix gup_pud_range() for dax

In the Linux kernel, the following vulnerability has been resolved: mm/gup: fix gup_pud_range() for dax For dax pud, pud_huge() returns true on x86. So the function works as long as hugetlb is configured. However, dax doesn't depend on hugetlb. Commit 414fd080d125 ("mm/gup: fix gup_pmd_range() for dax") fixed devmap-backed huge PMDs, but missed devmap-backed huge PUDs. Fix this as well. This fixes the below kernel panic: general protection fault, probably for non-canonical address 0x69e7c000cc478: 0000 [#1] SMP < snip > Call Trace: <TASK> get_user_pages_fast+0x1f/0x40 iov_iter_get_pages+0xc6/0x3b0 ? mempool_alloc+0x5d/0x170 bio_iov_iter_get_pages+0x82/0x4e0 ? bvec_alloc+0x91/0xc0 ? bio_alloc_bioset+0x19a/0x2a0 blkdev_direct_IO+0x282/0x480 ? __io_complete_rw_common+0xc0/0xc0 ? filemap_range_has_page+0x82/0xc0 generic_file_direct_write+0x9d/0x1a0 ? inode_update_time+0x24/0x30 __generic_file_write_iter+0xbd/0x1e0 blkdev_write_iter+0xb4/0x150 ? io_import_iovec+0x8d/0x340 io_write+0xf9/0x300 io_issue_sqe+0x3c3/0x1d30 ? sysvec_reschedule_ipi+0x6c/0x80 __io_queue_sqe+0x33/0x240 ? fget+0x76/0xa0 io_submit_sqes+0xe6a/0x18d0 ? __fget_light+0xd1/0x100 __x64_sys_io_uring_enter+0x199/0x880 ? __context_tracking_enter+0x1f/0x70 ? irqentry_exit_to_user_mode+0x24/0x30 ? irqentry_exit+0x1d/0x30 ? __context_tracking_exit+0xe/0x70 do_syscall_64+0x3b/0x90 entry_SYSCALL_64_after_hwframe+0x61/0xcb RIP: 0033:0x7fc97c11a7be < snip > </TASK> ---[ end trace 48b2e0e67debcaeb ]--- RIP: 0010:internal_get_user_pages_fast+0x340/0x990 < snip > Kernel panic - not syncing: Fatal exception Kernel Offset: disabled

Published Oct 21, 2024 · Updated May 11, 2026

Unknown · CVSS Not scored

CVE-2022-48985: net: mana: Fix race on per-CQ variable napi work_done

In the Linux kernel, the following vulnerability has been resolved: net: mana: Fix race on per-CQ variable napi work_done After calling napi_complete_done(), the NAPIF_STATE_SCHED bit may be cleared, and another CPU can start napi thread and access per-CQ variable, cq->work_done. If the other thread (for example, from busy_poll) sets it to a value >= budget, this thread will continue to run when it should stop, and cause memory corruption and panic. To fix this issue, save the per-CQ work_done variable in a local variable before napi_complete_done(), so it won't be corrupted by a possible concurrent thread after napi_complete_done(). Also, add a flag bit to advertise to the NIC firmware: the NAPI work_done variable race is fixed, so the driver is able to reliably support features like busy_poll.

Published Oct 21, 2024 · Updated May 11, 2026

Unknown · CVSS Not scored

CVE-2022-48984: can: slcan: fix freed work crash

In the Linux kernel, the following vulnerability has been resolved: can: slcan: fix freed work crash The LTP test pty03 is causing a crash in slcan: BUG: kernel NULL pointer dereference, address: 0000000000000008 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP NOPTI CPU: 0 PID: 348 Comm: kworker/0:3 Not tainted 6.0.8-1-default #1 openSUSE Tumbleweed 9d20364b934f5aab0a9bdf84e8f45cfdfae39dab Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.15.0-0-g2dd4b9b-rebuilt.opensuse.org 04/01/2014 Workqueue: 0x0 (events) RIP: 0010:process_one_work (/home/rich/kernel/linux/kernel/workqueue.c:706 /home/rich/kernel/linux/kernel/workqueue.c:2185) Code: 49 89 ff 41 56 41 55 41 54 55 53 48 89 f3 48 83 ec 10 48 8b 06 48 8b 6f 48 49 89 c4 45 30 e4 a8 04 b8 00 00 00 00 4c 0f 44 e0 <49> 8b 44 24 08 44 8b a8 00 01 00 00 41 83 e5 20 f6 45 10 04 75 0e RSP: 0018:ffffaf7b40f47e98 EFLAGS: 00010046 RAX: 0000000000000000 RBX: ffff9d644e1b8b48 RCX: ffff9d649e439968 RDX: 00000000ffff8455 RSI: ffff9d644e1b8b48 RDI: ffff9d64764aa6c0 RBP: ffff9d649e4335c0 R08: 0000000000000c00 R09: ffff9d64764aa734 R10: 0000000000000007 R11: 0000000000000001 R12: 0000000000000000 R13: ffff9d649e4335e8 R14: ffff9d64490da780 R15: ffff9d64764aa6c0 FS: 0000000000000000(0000) GS:ffff9d649e400000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000008 CR3: 0000000036424000 CR4: 00000000000006f0 Call Trace: <TASK> worker_thread (/home/rich/kernel/linux/kernel/workqueue.c:2436) kthread (/home/rich/kernel/linux/kernel/kthread.c:376) ret_from_fork (/home/rich/kernel/linux/arch/x86/entry/entry_64.S:312) Apparently, the slcan's tx_work is freed while being scheduled. While slcan_netdev_close() (netdev side) calls flush_work(&sl->tx_work), slcan_close() (tty side) does not. So when the netdev is never set UP, but the tty is stuffed with bytes and forced to wakeup write, the work is scheduled, but never flushed. So add an additional flush_work() to slcan_close() to be sure the work is flushed under all circumstances. The Fixes commit below moved flush_work() from slcan_close() to slcan_netdev_close(). What was the rationale behind it? Maybe we can drop the one in slcan_netdev_close()? I see the same pattern in can327. So it perhaps needs the very same fix.

Published Oct 21, 2024 · Updated May 11, 2026

Unknown · CVSS Not scored

CVE-2022-48983: io_uring: Fix a null-ptr-deref in io_tctx_exit_cb()

In the Linux kernel, the following vulnerability has been resolved: io_uring: Fix a null-ptr-deref in io_tctx_exit_cb() Syzkaller reports a NULL deref bug as follows: BUG: KASAN: null-ptr-deref in io_tctx_exit_cb+0x53/0xd3 Read of size 4 at addr 0000000000000138 by task file1/1955 CPU: 1 PID: 1955 Comm: file1 Not tainted 6.1.0-rc7-00103-gef4d3ea40565 #75 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.11.0-2.el7 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0xcd/0x134 ? io_tctx_exit_cb+0x53/0xd3 kasan_report+0xbb/0x1f0 ? io_tctx_exit_cb+0x53/0xd3 kasan_check_range+0x140/0x190 io_tctx_exit_cb+0x53/0xd3 task_work_run+0x164/0x250 ? task_work_cancel+0x30/0x30 get_signal+0x1c3/0x2440 ? lock_downgrade+0x6e0/0x6e0 ? lock_downgrade+0x6e0/0x6e0 ? exit_signals+0x8b0/0x8b0 ? do_raw_read_unlock+0x3b/0x70 ? do_raw_spin_unlock+0x50/0x230 arch_do_signal_or_restart+0x82/0x2470 ? kmem_cache_free+0x260/0x4b0 ? putname+0xfe/0x140 ? get_sigframe_size+0x10/0x10 ? do_execveat_common.isra.0+0x226/0x710 ? lockdep_hardirqs_on+0x79/0x100 ? putname+0xfe/0x140 ? do_execveat_common.isra.0+0x238/0x710 exit_to_user_mode_prepare+0x15f/0x250 syscall_exit_to_user_mode+0x19/0x50 do_syscall_64+0x42/0xb0 entry_SYSCALL_64_after_hwframe+0x63/0xcd RIP: 0023:0x0 Code: Unable to access opcode bytes at 0xffffffffffffffd6. RSP: 002b:00000000fffb7790 EFLAGS: 00000200 ORIG_RAX: 000000000000000b RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 </TASK> Kernel panic - not syncing: panic_on_warn set ... This happens because the adding of task_work from io_ring_exit_work() isn't synchronized with canceling all work items from eg exec. The execution of the two are ordered in that they are both run by the task itself, but if io_tctx_exit_cb() is queued while we're canceling all work items off exec AND gets executed when the task exits to userspace rather than in the main loop in io_uring_cancel_generic(), then we can find current->io_uring == NULL and hit the above crash. It's safe to add this NULL check here, because the execution of the two paths are done by the task itself. [axboe: add code comment and also put an explanation in the commit msg]

Published Oct 21, 2024 · Updated May 11, 2026

Unknown · CVSS Not scored

CVE-2022-48982: Bluetooth: Fix crash when replugging CSR fake controllers

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: Fix crash when replugging CSR fake controllers It seems fake CSR 5.0 clones can cause the suspend notifier to be registered twice causing the following kernel panic: [ 71.986122] Call Trace: [ 71.986124] <TASK> [ 71.986125] blocking_notifier_chain_register+0x33/0x60 [ 71.986130] hci_register_dev+0x316/0x3d0 [bluetooth 99b5497ea3d09708fa1366c1dc03288bf3cca8da] [ 71.986154] btusb_probe+0x979/0xd85 [btusb e1e0605a4f4c01984a4b9c8ac58c3666ae287477] [ 71.986159] ? __pm_runtime_set_status+0x1a9/0x300 [ 71.986162] ? ktime_get_mono_fast_ns+0x3e/0x90 [ 71.986167] usb_probe_interface+0xe3/0x2b0 [ 71.986171] really_probe+0xdb/0x380 [ 71.986174] ? pm_runtime_barrier+0x54/0x90 [ 71.986177] __driver_probe_device+0x78/0x170 [ 71.986180] driver_probe_device+0x1f/0x90 [ 71.986183] __device_attach_driver+0x89/0x110 [ 71.986186] ? driver_allows_async_probing+0x70/0x70 [ 71.986189] bus_for_each_drv+0x8c/0xe0 [ 71.986192] __device_attach+0xb2/0x1e0 [ 71.986195] bus_probe_device+0x92/0xb0 [ 71.986198] device_add+0x422/0x9a0 [ 71.986201] ? sysfs_merge_group+0xd4/0x110 [ 71.986205] usb_set_configuration+0x57a/0x820 [ 71.986208] usb_generic_driver_probe+0x4f/0x70 [ 71.986211] usb_probe_device+0x3a/0x110 [ 71.986213] really_probe+0xdb/0x380 [ 71.986216] ? pm_runtime_barrier+0x54/0x90 [ 71.986219] __driver_probe_device+0x78/0x170 [ 71.986221] driver_probe_device+0x1f/0x90 [ 71.986224] __device_attach_driver+0x89/0x110 [ 71.986227] ? driver_allows_async_probing+0x70/0x70 [ 71.986230] bus_for_each_drv+0x8c/0xe0 [ 71.986232] __device_attach+0xb2/0x1e0 [ 71.986235] bus_probe_device+0x92/0xb0 [ 71.986237] device_add+0x422/0x9a0 [ 71.986239] ? _dev_info+0x7d/0x98 [ 71.986242] ? blake2s_update+0x4c/0xc0 [ 71.986246] usb_new_device.cold+0x148/0x36d [ 71.986250] hub_event+0xa8a/0x1910 [ 71.986255] process_one_work+0x1c4/0x380 [ 71.986259] worker_thread+0x51/0x390 [ 71.986262] ? rescuer_thread+0x3b0/0x3b0 [ 71.986264] kthread+0xdb/0x110 [ 71.986266] ? kthread_complete_and_exit+0x20/0x20 [ 71.986268] ret_from_fork+0x1f/0x30 [ 71.986273] </TASK> [ 71.986274] ---[ end trace 0000000000000000 ]--- [ 71.986284] btusb: probe of 2-1.6:1.0 failed with error -17

Published Oct 21, 2024 · Updated May 11, 2026

Unknown · CVSS Not scored

CVE-2022-48981: drm/shmem-helper: Remove errant put in error path

In the Linux kernel, the following vulnerability has been resolved: drm/shmem-helper: Remove errant put in error path drm_gem_shmem_mmap() doesn't own this reference, resulting in the GEM object getting prematurely freed leading to a later use-after-free.

Published Oct 21, 2024 · Updated May 11, 2026

Unknown · CVSS Not scored

CVE-2022-48980: net: dsa: sja1105: avoid out of bounds access in sja1105_init_l2_policing()

In the Linux kernel, the following vulnerability has been resolved: net: dsa: sja1105: avoid out of bounds access in sja1105_init_l2_policing() The SJA1105 family has 45 L2 policing table entries (SJA1105_MAX_L2_POLICING_COUNT) and SJA1110 has 110 (SJA1110_MAX_L2_POLICING_COUNT). Keeping the table structure but accounting for the difference in port count (5 in SJA1105 vs 10 in SJA1110) does not fully explain the difference. Rather, the SJA1110 also has L2 ingress policers for multicast traffic. If a packet is classified as multicast, it will be processed by the policer index 99 + SRCPORT. The sja1105_init_l2_policing() function initializes all L2 policers such that they don't interfere with normal packet reception by default. To have a common code between SJA1105 and SJA1110, the index of the multicast policer for the port is calculated because it's an index that is out of bounds for SJA1105 but in bounds for SJA1110, and a bounds check is performed. The code fails to do the proper thing when determining what to do with the multicast policer of port 0 on SJA1105 (ds->num_ports = 5). The "mcast" index will be equal to 45, which is also equal to table->ops->max_entry_count (SJA1105_MAX_L2_POLICING_COUNT). So it passes through the check. But at the same time, SJA1105 doesn't have multicast policers. So the code programs the SHARINDX field of an out-of-bounds element in the L2 Policing table of the static config. The comparison between index 45 and 45 entries should have determined the code to not access this policer index on SJA1105, since its memory wasn't even allocated. With enough bad luck, the out-of-bounds write could even overwrite other valid kernel data, but in this case, the issue was detected using KASAN. Kernel log: sja1105 spi5.0: Probed switch chip: SJA1105Q ================================================================== BUG: KASAN: slab-out-of-bounds in sja1105_setup+0x1cbc/0x2340 Write of size 8 at addr ffffff880bd57708 by task kworker/u8:0/8 ... Workqueue: events_unbound deferred_probe_work_func Call trace: ... sja1105_setup+0x1cbc/0x2340 dsa_register_switch+0x1284/0x18d0 sja1105_probe+0x748/0x840 ... Allocated by task 8: ... sja1105_setup+0x1bcc/0x2340 dsa_register_switch+0x1284/0x18d0 sja1105_probe+0x748/0x840 ...

Published Oct 21, 2024 · Updated May 11, 2026

Unknown · CVSS Not scored

CVE-2022-48979: drm/amd/display: fix array index out of bound error in DCN32 DML

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: fix array index out of bound error in DCN32 DML [Why&How] LinkCapacitySupport array is indexed with the number of voltage states and not the number of max DPPs. Fix the error by changing the array declaration to use the correct (larger) array size of total number of voltage states.

Published Oct 21, 2024 · Updated May 11, 2026

Unknown · CVSS Not scored

CVE-2022-48978: HID: core: fix shift-out-of-bounds in hid_report_raw_event

In the Linux kernel, the following vulnerability has been resolved: HID: core: fix shift-out-of-bounds in hid_report_raw_event Syzbot reported shift-out-of-bounds in hid_report_raw_event. microsoft 0003:045E:07DA.0001: hid_field_extract() called with n (128) > 32! (swapper/0) ====================================================================== UBSAN: shift-out-of-bounds in drivers/hid/hid-core.c:1323:20 shift exponent 127 is too large for 32-bit type 'int' CPU: 0 PID: 0 Comm: swapper/0 Not tainted 6.1.0-rc4-syzkaller-00159-g4bbf3422df78 #0 Hardware name: Google Compute Engine/Google Compute Engine, BIOS Google 10/26/2022 Call Trace: <IRQ> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x1e3/0x2cb lib/dump_stack.c:106 ubsan_epilogue lib/ubsan.c:151 [inline] __ubsan_handle_shift_out_of_bounds+0x3a6/0x420 lib/ubsan.c:322 snto32 drivers/hid/hid-core.c:1323 [inline] hid_input_fetch_field drivers/hid/hid-core.c:1572 [inline] hid_process_report drivers/hid/hid-core.c:1665 [inline] hid_report_raw_event+0xd56/0x18b0 drivers/hid/hid-core.c:1998 hid_input_report+0x408/0x4f0 drivers/hid/hid-core.c:2066 hid_irq_in+0x459/0x690 drivers/hid/usbhid/hid-core.c:284 __usb_hcd_giveback_urb+0x369/0x530 drivers/usb/core/hcd.c:1671 dummy_timer+0x86b/0x3110 drivers/usb/gadget/udc/dummy_hcd.c:1988 call_timer_fn+0xf5/0x210 kernel/time/timer.c:1474 expire_timers kernel/time/timer.c:1519 [inline] __run_timers+0x76a/0x980 kernel/time/timer.c:1790 run_timer_softirq+0x63/0xf0 kernel/time/timer.c:1803 __do_softirq+0x277/0x75b kernel/softirq.c:571 __irq_exit_rcu+0xec/0x170 kernel/softirq.c:650 irq_exit_rcu+0x5/0x20 kernel/softirq.c:662 sysvec_apic_timer_interrupt+0x91/0xb0 arch/x86/kernel/apic/apic.c:1107 ====================================================================== If the size of the integer (unsigned n) is bigger than 32 in snto32(), shift exponent will be too large for 32-bit type 'int', resulting in a shift-out-of-bounds bug. Fix this by adding a check on the size of the integer (unsigned n) in snto32(). To add support for n greater than 32 bits, set n to 32, if n is greater than 32.

Published Oct 21, 2024 · Updated May 11, 2026

Unknown · CVSS Not scored

CVE-2022-48977: can: af_can: fix NULL pointer dereference in can_rcv_filter

In the Linux kernel, the following vulnerability has been resolved: can: af_can: fix NULL pointer dereference in can_rcv_filter Analogue to commit 8aa59e355949 ("can: af_can: fix NULL pointer dereference in can_rx_register()") we need to check for a missing initialization of ml_priv in the receive path of CAN frames. Since commit 4e096a18867a ("net: introduce CAN specific pointer in the struct net_device") the check for dev->type to be ARPHRD_CAN is not sufficient anymore since bonding or tun netdevices claim to be CAN devices but do not initialize ml_priv accordingly.

Published Oct 21, 2024 · Updated May 11, 2026

Unknown · CVSS Not scored

CVE-2022-48976: netfilter: flowtable_offload: fix using __this_cpu_add in preemptible

In the Linux kernel, the following vulnerability has been resolved: netfilter: flowtable_offload: fix using __this_cpu_add in preemptible flow_offload_queue_work() can be called in workqueue without bh disabled, like the call trace showed in my act_ct testing, calling NF_FLOW_TABLE_STAT_INC() there would cause a call trace: BUG: using __this_cpu_add() in preemptible [00000000] code: kworker/u4:0/138560 caller is flow_offload_queue_work+0xec/0x1b0 [nf_flow_table] Workqueue: act_ct_workqueue tcf_ct_flow_table_cleanup_work [act_ct] Call Trace: <TASK> dump_stack_lvl+0x33/0x46 check_preemption_disabled+0xc3/0xf0 flow_offload_queue_work+0xec/0x1b0 [nf_flow_table] nf_flow_table_iterate+0x138/0x170 [nf_flow_table] nf_flow_table_free+0x140/0x1a0 [nf_flow_table] tcf_ct_flow_table_cleanup_work+0x2f/0x2b0 [act_ct] process_one_work+0x6a3/0x1030 worker_thread+0x8a/0xdf0 This patch fixes it by using NF_FLOW_TABLE_STAT_INC_ATOMIC() instead in flow_offload_queue_work(). Note that for FLOW_CLS_REPLACE branch in flow_offload_queue_work(), it may not be called in preemptible path, but it's good to use NF_FLOW_TABLE_STAT_INC_ATOMIC() for all cases in flow_offload_queue_work().

Published Oct 21, 2024 · Updated May 11, 2026

Unknown · CVSS Not scored

CVE-2022-48975: gpiolib: fix memory leak in gpiochip_setup_dev()

In the Linux kernel, the following vulnerability has been resolved: gpiolib: fix memory leak in gpiochip_setup_dev() Here is a backtrace report about memory leak detected in gpiochip_setup_dev(): unreferenced object 0xffff88810b406400 (size 512): comm "python3", pid 1682, jiffies 4295346908 (age 24.090s) backtrace: kmalloc_trace device_add device_private_init at drivers/base/core.c:3361 (inlined by) device_add at drivers/base/core.c:3411 cdev_device_add gpiolib_cdev_register gpiochip_setup_dev gpiochip_add_data_with_key gcdev_register() & gcdev_unregister() would call device_add() & device_del() (no matter CONFIG_GPIO_CDEV is enabled or not) to register/unregister device. However, if device_add() succeeds, some resource (like struct device_private allocated by device_private_init()) is not released by device_del(). Therefore, after device_add() succeeds by gcdev_register(), it needs to call put_device() to release resource in the error handle path. Here we move forward the register of release function, and let it release every piece of resource by put_device() instead of kfree(). While at it, fix another subtle issue, i.e. when gc->ngpio is equal to 0, we still call kcalloc() and, in case of further error, kfree() on the ZERO_PTR pointer, which is not NULL. It's not a bug per se, but rather waste of the resources and potentially wrong expectation about contents of the gdev->descs variable.

Published Oct 21, 2024 · Updated May 11, 2026

Unknown · CVSS Not scored

CVE-2022-48974: netfilter: conntrack: fix using __this_cpu_add in preemptible

In the Linux kernel, the following vulnerability has been resolved: netfilter: conntrack: fix using __this_cpu_add in preemptible Currently in nf_conntrack_hash_check_insert(), when it fails in nf_ct_ext_valid_pre/post(), NF_CT_STAT_INC() will be called in the preemptible context, a call trace can be triggered: BUG: using __this_cpu_add() in preemptible [00000000] code: conntrack/1636 caller is nf_conntrack_hash_check_insert+0x45/0x430 [nf_conntrack] Call Trace: <TASK> dump_stack_lvl+0x33/0x46 check_preemption_disabled+0xc3/0xf0 nf_conntrack_hash_check_insert+0x45/0x430 [nf_conntrack] ctnetlink_create_conntrack+0x3cd/0x4e0 [nf_conntrack_netlink] ctnetlink_new_conntrack+0x1c0/0x450 [nf_conntrack_netlink] nfnetlink_rcv_msg+0x277/0x2f0 [nfnetlink] netlink_rcv_skb+0x50/0x100 nfnetlink_rcv+0x65/0x144 [nfnetlink] netlink_unicast+0x1ae/0x290 netlink_sendmsg+0x257/0x4f0 sock_sendmsg+0x5f/0x70 This patch is to fix it by changing to use NF_CT_STAT_INC_ATOMIC() for nf_ct_ext_valid_pre/post() check in nf_conntrack_hash_check_insert(), as well as nf_ct_ext_valid_post() in __nf_conntrack_confirm(). Note that nf_ct_ext_valid_pre() check in __nf_conntrack_confirm() is safe to use NF_CT_STAT_INC(), as it's under local_bh_disable().

Published Oct 21, 2024 · Updated May 11, 2026

Unknown · CVSS Not scored

CVE-2022-48973: gpio: amd8111: Fix PCI device reference count leak

In the Linux kernel, the following vulnerability has been resolved: gpio: amd8111: Fix PCI device reference count leak for_each_pci_dev() is implemented by pci_get_device(). The comment of pci_get_device() says that it will increase the reference count for the returned pci_dev and also decrease the reference count for the input pci_dev @from if it is not NULL. If we break for_each_pci_dev() loop with pdev not NULL, we need to call pci_dev_put() to decrease the reference count. Add the missing pci_dev_put() after the 'out' label. Since pci_dev_put() can handle NULL input parameter, there is no problem for the 'Device not found' branch. For the normal path, add pci_dev_put() in amd_gpio_exit().

Published Oct 21, 2024 · Updated May 11, 2026

Unknown · CVSS Not scored

CVE-2022-48972: mac802154: fix missing INIT_LIST_HEAD in ieee802154_if_add()

In the Linux kernel, the following vulnerability has been resolved: mac802154: fix missing INIT_LIST_HEAD in ieee802154_if_add() Kernel fault injection test reports null-ptr-deref as follows: BUG: kernel NULL pointer dereference, address: 0000000000000008 RIP: 0010:cfg802154_netdev_notifier_call+0x120/0x310 include/linux/list.h:114 Call Trace: <TASK> raw_notifier_call_chain+0x6d/0xa0 kernel/notifier.c:87 call_netdevice_notifiers_info+0x6e/0xc0 net/core/dev.c:1944 unregister_netdevice_many_notify+0x60d/0xcb0 net/core/dev.c:1982 unregister_netdevice_queue+0x154/0x1a0 net/core/dev.c:10879 register_netdevice+0x9a8/0xb90 net/core/dev.c:10083 ieee802154_if_add+0x6ed/0x7e0 net/mac802154/iface.c:659 ieee802154_register_hw+0x29c/0x330 net/mac802154/main.c:229 mcr20a_probe+0xaaa/0xcb1 drivers/net/ieee802154/mcr20a.c:1316 ieee802154_if_add() allocates wpan_dev as netdev's private data, but not init the list in struct wpan_dev. cfg802154_netdev_notifier_call() manage the list when device register/unregister, and may lead to null-ptr-deref. Use INIT_LIST_HEAD() on it to initialize it correctly.

Published Oct 21, 2024 · Updated May 11, 2026

Unknown · CVSS Not scored

CVE-2022-48971: Bluetooth: Fix not cleanup led when bt_init fails

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: Fix not cleanup led when bt_init fails bt_init() calls bt_leds_init() to register led, but if it fails later, bt_leds_cleanup() is not called to unregister it. This can cause panic if the argument "bluetooth-power" in text is freed and then another led_trigger_register() tries to access it: BUG: unable to handle page fault for address: ffffffffc06d3bc0 RIP: 0010:strcmp+0xc/0x30 Call Trace: <TASK> led_trigger_register+0x10d/0x4f0 led_trigger_register_simple+0x7d/0x100 bt_init+0x39/0xf7 [bluetooth] do_one_initcall+0xd0/0x4e0

Published Oct 21, 2024 · Updated May 11, 2026

Unknown · CVSS Not scored

CVE-2022-48970: af_unix: Get user_ns from in_skb in unix_diag_get_exact().

In the Linux kernel, the following vulnerability has been resolved: af_unix: Get user_ns from in_skb in unix_diag_get_exact(). Wei Chen reported a NULL deref in sk_user_ns() [0][1], and Paolo diagnosed the root cause: in unix_diag_get_exact(), the newly allocated skb does not have sk. [2] We must get the user_ns from the NETLINK_CB(in_skb).sk and pass it to sk_diag_fill(). [0]: BUG: kernel NULL pointer dereference, address: 0000000000000270 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 12bbce067 P4D 12bbce067 PUD 12bc40067 PMD 0 Oops: 0000 [#1] PREEMPT SMP CPU: 0 PID: 27942 Comm: syz-executor.0 Not tainted 6.1.0-rc5-next-20221118 #2 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.13.0-48-gd9c812dda519-prebuilt.qemu.org 04/01/2014 RIP: 0010:sk_user_ns include/net/sock.h:920 [inline] RIP: 0010:sk_diag_dump_uid net/unix/diag.c:119 [inline] RIP: 0010:sk_diag_fill+0x77d/0x890 net/unix/diag.c:170 Code: 89 ef e8 66 d4 2d fd c7 44 24 40 00 00 00 00 49 8d 7c 24 18 e8 54 d7 2d fd 49 8b 5c 24 18 48 8d bb 70 02 00 00 e8 43 d7 2d fd <48> 8b 9b 70 02 00 00 48 8d 7b 10 e8 33 d7 2d fd 48 8b 5b 10 48 8d RSP: 0018:ffffc90000d67968 EFLAGS: 00010246 RAX: ffff88812badaa48 RBX: 0000000000000000 RCX: ffffffff840d481d RDX: 0000000000000465 RSI: 0000000000000000 RDI: 0000000000000270 RBP: ffffc90000d679a8 R08: 0000000000000277 R09: 0000000000000000 R10: 0001ffffffffffff R11: 0001c90000d679a8 R12: ffff88812ac03800 R13: ffff88812c87c400 R14: ffff88812ae42210 R15: ffff888103026940 FS: 00007f08b4e6f700(0000) GS:ffff88813bc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000270 CR3: 000000012c58b000 CR4: 00000000003506f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> unix_diag_get_exact net/unix/diag.c:285 [inline] unix_diag_handler_dump+0x3f9/0x500 net/unix/diag.c:317 __sock_diag_cmd net/core/sock_diag.c:235 [inline] sock_diag_rcv_msg+0x237/0x250 net/core/sock_diag.c:266 netlink_rcv_skb+0x13e/0x250 net/netlink/af_netlink.c:2564 sock_diag_rcv+0x24/0x40 net/core/sock_diag.c:277 netlink_unicast_kernel net/netlink/af_netlink.c:1330 [inline] netlink_unicast+0x5e9/0x6b0 net/netlink/af_netlink.c:1356 netlink_sendmsg+0x739/0x860 net/netlink/af_netlink.c:1932 sock_sendmsg_nosec net/socket.c:714 [inline] sock_sendmsg net/socket.c:734 [inline] ____sys_sendmsg+0x38f/0x500 net/socket.c:2476 ___sys_sendmsg net/socket.c:2530 [inline] __sys_sendmsg+0x197/0x230 net/socket.c:2559 __do_sys_sendmsg net/socket.c:2568 [inline] __se_sys_sendmsg net/socket.c:2566 [inline] __x64_sys_sendmsg+0x42/0x50 net/socket.c:2566 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x2b/0x70 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd RIP: 0033:0x4697f9 Code: f7 d8 64 89 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f08b4e6ec48 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 000000000077bf80 RCX: 00000000004697f9 RDX: 0000000000000000 RSI: 00000000200001c0 RDI: 0000000000000003 RBP: 00000000004d29e9 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 000000000077bf80 R13: 0000000000000000 R14: 000000000077bf80 R15: 00007ffdb36bc6c0 </TASK> Modules linked in: CR2: 0000000000000270 [1]: https://lore.kernel.org/netdev/CAO4mrfdvyjFpokhNsiwZiP-wpdSD0AStcJwfKcKQdAALQ9_2Qw@mail.gmail.com/ [2]: https://lore.kernel.org/netdev/e04315e7c90d9a75613f3993c2baf2d344eef7eb.camel@redhat.com/

Published Oct 21, 2024 · Updated May 11, 2026

Unknown · CVSS Not scored

CVE-2022-48969: xen-netfront: Fix NULL sring after live migration

In the Linux kernel, the following vulnerability has been resolved: xen-netfront: Fix NULL sring after live migration A NAPI is setup for each network sring to poll data to kernel The sring with source host is destroyed before live migration and new sring with target host is setup after live migration. The NAPI for the old sring is not deleted until setup new sring with target host after migration. With busy_poll/busy_read enabled, the NAPI can be polled before got deleted when resume VM. BUG: unable to handle kernel NULL pointer dereference at 0000000000000008 IP: xennet_poll+0xae/0xd20 PGD 0 P4D 0 Oops: 0000 [#1] SMP PTI Call Trace: finish_task_switch+0x71/0x230 timerqueue_del+0x1d/0x40 hrtimer_try_to_cancel+0xb5/0x110 xennet_alloc_rx_buffers+0x2a0/0x2a0 napi_busy_loop+0xdb/0x270 sock_poll+0x87/0x90 do_sys_poll+0x26f/0x580 tracing_map_insert+0x1d4/0x2f0 event_hist_trigger+0x14a/0x260 finish_task_switch+0x71/0x230 __schedule+0x256/0x890 recalc_sigpending+0x1b/0x50 xen_sched_clock+0x15/0x20 __rb_reserve_next+0x12d/0x140 ring_buffer_lock_reserve+0x123/0x3d0 event_triggers_call+0x87/0xb0 trace_event_buffer_commit+0x1c4/0x210 xen_clocksource_get_cycles+0x15/0x20 ktime_get_ts64+0x51/0xf0 SyS_ppoll+0x160/0x1a0 SyS_ppoll+0x160/0x1a0 do_syscall_64+0x73/0x130 entry_SYSCALL_64_after_hwframe+0x41/0xa6 ... RIP: xennet_poll+0xae/0xd20 RSP: ffffb4f041933900 CR2: 0000000000000008 ---[ end trace f8601785b354351c ]--- xen frontend should remove the NAPIs for the old srings before live migration as the bond srings are destroyed There is a tiny window between the srings are set to NULL and the NAPIs are disabled, It is safe as the NAPI threads are still frozen at that time

Published Oct 21, 2024 · Updated May 11, 2026

Unknown · CVSS Not scored

CVE-2022-48968: octeontx2-pf: Fix potential memory leak in otx2_init_tc()

In the Linux kernel, the following vulnerability has been resolved: octeontx2-pf: Fix potential memory leak in otx2_init_tc() In otx2_init_tc(), if rhashtable_init() failed, it does not free tc->tc_entries_bitmap which is allocated in otx2_tc_alloc_ent_bitmap().

Published Oct 21, 2024 · Updated May 11, 2026

Unknown · CVSS Not scored

CVE-2022-48967: NFC: nci: Bounds check struct nfc_target arrays

In the Linux kernel, the following vulnerability has been resolved: NFC: nci: Bounds check struct nfc_target arrays While running under CONFIG_FORTIFY_SOURCE=y, syzkaller reported: memcpy: detected field-spanning write (size 129) of single field "target->sensf_res" at net/nfc/nci/ntf.c:260 (size 18) This appears to be a legitimate lack of bounds checking in nci_add_new_protocol(). Add the missing checks.

Published Oct 21, 2024 · Updated May 11, 2026

Unknown · CVSS Not scored

CVE-2022-48966: net: mvneta: Prevent out of bounds read in mvneta_config_rss()

In the Linux kernel, the following vulnerability has been resolved: net: mvneta: Prevent out of bounds read in mvneta_config_rss() The pp->indir[0] value comes from the user. It is passed to: if (cpu_online(pp->rxq_def)) inside the mvneta_percpu_elect() function. It needs bounds checkeding to ensure that it is not beyond the end of the cpu bitmap.

Published Oct 21, 2024 · Updated May 11, 2026

Unknown · CVSS Not scored

CVE-2022-48965: gpio/rockchip: fix refcount leak in rockchip_gpiolib_register()

In the Linux kernel, the following vulnerability has been resolved: gpio/rockchip: fix refcount leak in rockchip_gpiolib_register() The node returned by of_get_parent() with refcount incremented, of_node_put() needs be called when finish using it. So add it in the end of of_pinctrl_get().

Published Oct 21, 2024 · Updated May 11, 2026

Unknown · CVSS Not scored

CVE-2022-48964: ravb: Fix potential use-after-free in ravb_rx_gbeth()

In the Linux kernel, the following vulnerability has been resolved: ravb: Fix potential use-after-free in ravb_rx_gbeth() The skb is delivered to napi_gro_receive() which may free it, after calling this, dereferencing skb may trigger use-after-free.

Published Oct 21, 2024 · Updated May 11, 2026

Unknown · CVSS Not scored

CVE-2022-48963: net: wwan: iosm: fix memory leak in ipc_mux_init()

In the Linux kernel, the following vulnerability has been resolved: net: wwan: iosm: fix memory leak in ipc_mux_init() When failed to alloc ipc_mux->ul_adb.pp_qlt in ipc_mux_init(), ipc_mux is not released.

Published Oct 21, 2024 · Updated May 11, 2026

Unknown · CVSS Not scored

CVE-2022-48962: net: hisilicon: Fix potential use-after-free in hisi_femac_rx()

In the Linux kernel, the following vulnerability has been resolved: net: hisilicon: Fix potential use-after-free in hisi_femac_rx() The skb is delivered to napi_gro_receive() which may free it, after calling this, dereferencing skb may trigger use-after-free.

Published Oct 21, 2024 · Updated May 11, 2026

Unknown · CVSS Not scored

CVE-2022-48961: net: mdio: fix unbalanced fwnode reference count in mdio_device_release()

In the Linux kernel, the following vulnerability has been resolved: net: mdio: fix unbalanced fwnode reference count in mdio_device_release() There is warning report about of_node refcount leak while probing mdio device: OF: ERROR: memory leak, expected refcount 1 instead of 2, of_node_get()/of_node_put() unbalanced - destroy cset entry: attach overlay node /spi/soc@0/mdio@710700c0/ethernet@4 In of_mdiobus_register_device(), we increase fwnode refcount by fwnode_handle_get() before associating the of_node with mdio device, but it has never been decreased in normal path. Since that, in mdio_device_release(), it needs to call fwnode_handle_put() in addition instead of calling kfree() directly. After above, just calling mdio_device_free() in the error handle path of of_mdiobus_register_device() is enough to keep the refcount balanced.

Published Oct 21, 2024 · Updated May 11, 2026

Unknown · CVSS Not scored

CVE-2022-48960: net: hisilicon: Fix potential use-after-free in hix5hd2_rx()

In the Linux kernel, the following vulnerability has been resolved: net: hisilicon: Fix potential use-after-free in hix5hd2_rx() The skb is delivered to napi_gro_receive() which may free it, after calling this, dereferencing skb may trigger use-after-free.

Published Oct 21, 2024 · Updated May 11, 2026

Unknown · CVSS Not scored

CVE-2022-48958: ethernet: aeroflex: fix potential skb leak in greth_init_rings()

In the Linux kernel, the following vulnerability has been resolved: ethernet: aeroflex: fix potential skb leak in greth_init_rings() The greth_init_rings() function won't free the newly allocated skb when dma_mapping_error() returns error, so add dev_kfree_skb() to fix it. Compile tested only.

Published Oct 21, 2024 · Updated May 11, 2026

Unknown · CVSS Not scored

CVE-2022-48956: ipv6: avoid use-after-free in ip6_fragment()

In the Linux kernel, the following vulnerability has been resolved: ipv6: avoid use-after-free in ip6_fragment() Blamed commit claimed rcu_read_lock() was held by ip6_fragment() callers. It seems to not be always true, at least for UDP stack. syzbot reported: BUG: KASAN: use-after-free in ip6_dst_idev include/net/ip6_fib.h:245 [inline] BUG: KASAN: use-after-free in ip6_fragment+0x2724/0x2770 net/ipv6/ip6_output.c:951 Read of size 8 at addr ffff88801d403e80 by task syz-executor.3/7618 CPU: 1 PID: 7618 Comm: syz-executor.3 Not tainted 6.1.0-rc6-syzkaller-00012-g4312098baf37 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/26/2022 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0xd1/0x138 lib/dump_stack.c:106 print_address_description mm/kasan/report.c:284 [inline] print_report+0x15e/0x45d mm/kasan/report.c:395 kasan_report+0xbf/0x1f0 mm/kasan/report.c:495 ip6_dst_idev include/net/ip6_fib.h:245 [inline] ip6_fragment+0x2724/0x2770 net/ipv6/ip6_output.c:951 __ip6_finish_output net/ipv6/ip6_output.c:193 [inline] ip6_finish_output+0x9a3/0x1170 net/ipv6/ip6_output.c:206 NF_HOOK_COND include/linux/netfilter.h:291 [inline] ip6_output+0x1f1/0x540 net/ipv6/ip6_output.c:227 dst_output include/net/dst.h:445 [inline] ip6_local_out+0xb3/0x1a0 net/ipv6/output_core.c:161 ip6_send_skb+0xbb/0x340 net/ipv6/ip6_output.c:1966 udp_v6_send_skb+0x82a/0x18a0 net/ipv6/udp.c:1286 udp_v6_push_pending_frames+0x140/0x200 net/ipv6/udp.c:1313 udpv6_sendmsg+0x18da/0x2c80 net/ipv6/udp.c:1606 inet6_sendmsg+0x9d/0xe0 net/ipv6/af_inet6.c:665 sock_sendmsg_nosec net/socket.c:714 [inline] sock_sendmsg+0xd3/0x120 net/socket.c:734 sock_write_iter+0x295/0x3d0 net/socket.c:1108 call_write_iter include/linux/fs.h:2191 [inline] new_sync_write fs/read_write.c:491 [inline] vfs_write+0x9ed/0xdd0 fs/read_write.c:584 ksys_write+0x1ec/0x250 fs/read_write.c:637 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x39/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd RIP: 0033:0x7fde3588c0d9 Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 f1 19 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007fde365b6168 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 00007fde359ac050 RCX: 00007fde3588c0d9 RDX: 000000000000ffdc RSI: 00000000200000c0 RDI: 000000000000000a RBP: 00007fde358e7ae9 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 00007fde35acfb1f R14: 00007fde365b6300 R15: 0000000000022000 </TASK> Allocated by task 7618: kasan_save_stack+0x22/0x40 mm/kasan/common.c:45 kasan_set_track+0x25/0x30 mm/kasan/common.c:52 __kasan_slab_alloc+0x82/0x90 mm/kasan/common.c:325 kasan_slab_alloc include/linux/kasan.h:201 [inline] slab_post_alloc_hook mm/slab.h:737 [inline] slab_alloc_node mm/slub.c:3398 [inline] slab_alloc mm/slub.c:3406 [inline] __kmem_cache_alloc_lru mm/slub.c:3413 [inline] kmem_cache_alloc+0x2b4/0x3d0 mm/slub.c:3422 dst_alloc+0x14a/0x1f0 net/core/dst.c:92 ip6_dst_alloc+0x32/0xa0 net/ipv6/route.c:344 ip6_rt_pcpu_alloc net/ipv6/route.c:1369 [inline] rt6_make_pcpu_route net/ipv6/route.c:1417 [inline] ip6_pol_route+0x901/0x1190 net/ipv6/route.c:2254 pol_lookup_func include/net/ip6_fib.h:582 [inline] fib6_rule_lookup+0x52e/0x6f0 net/ipv6/fib6_rules.c:121 ip6_route_output_flags_noref+0x2e6/0x380 net/ipv6/route.c:2625 ip6_route_output_flags+0x76/0x320 net/ipv6/route.c:2638 ip6_route_output include/net/ip6_route.h:98 [inline] ip6_dst_lookup_tail+0x5ab/0x1620 net/ipv6/ip6_output.c:1092 ip6_dst_lookup_flow+0x90/0x1d0 net/ipv6/ip6_output.c:1222 ip6_sk_dst_lookup_flow+0x553/0x980 net/ipv6/ip6_output.c:1260 udpv6_sendmsg+0x151d/0x2c80 net/ipv6/udp.c:1554 inet6_sendmsg+0x9d/0xe0 net/ipv6/af_inet6.c:665 sock_sendmsg_nosec n ---truncated---

Published Oct 21, 2024 · Updated May 11, 2026

Unknown · CVSS Not scored

CVE-2022-48955: net: thunderbolt: fix memory leak in tbnet_open()

In the Linux kernel, the following vulnerability has been resolved: net: thunderbolt: fix memory leak in tbnet_open() When tb_ring_alloc_rx() failed in tbnet_open(), ida that allocated in tb_xdomain_alloc_out_hopid() is not released. Add tb_xdomain_release_out_hopid() to the error path to release ida.

Published Oct 21, 2024 · Updated May 11, 2026

Unknown · CVSS Not scored

CVE-2022-48954: s390/qeth: fix use-after-free in hsci

In the Linux kernel, the following vulnerability has been resolved: s390/qeth: fix use-after-free in hsci KASAN found that addr was dereferenced after br2dev_event_work was freed. ================================================================== BUG: KASAN: use-after-free in qeth_l2_br2dev_worker+0x5ba/0x6b0 Read of size 1 at addr 00000000fdcea440 by task kworker/u760:4/540 CPU: 17 PID: 540 Comm: kworker/u760:4 Tainted: G E 6.1.0-20221128.rc7.git1.5aa3bed4ce83.300.fc36.s390x+kasan #1 Hardware name: IBM 8561 T01 703 (LPAR) Workqueue: 0.0.8000_event qeth_l2_br2dev_worker Call Trace: [<000000016944d4ce>] dump_stack_lvl+0xc6/0xf8 [<000000016942cd9c>] print_address_description.constprop.0+0x34/0x2a0 [<000000016942d118>] print_report+0x110/0x1f8 [<0000000167a7bd04>] kasan_report+0xfc/0x128 [<000000016938d79a>] qeth_l2_br2dev_worker+0x5ba/0x6b0 [<00000001673edd1e>] process_one_work+0x76e/0x1128 [<00000001673ee85c>] worker_thread+0x184/0x1098 [<000000016740718a>] kthread+0x26a/0x310 [<00000001672c606a>] __ret_from_fork+0x8a/0xe8 [<00000001694711da>] ret_from_fork+0xa/0x40 Allocated by task 108338: kasan_save_stack+0x40/0x68 kasan_set_track+0x36/0x48 __kasan_kmalloc+0xa0/0xc0 qeth_l2_switchdev_event+0x25a/0x738 atomic_notifier_call_chain+0x9c/0xf8 br_switchdev_fdb_notify+0xf4/0x110 fdb_notify+0x122/0x180 fdb_add_entry.constprop.0.isra.0+0x312/0x558 br_fdb_add+0x59e/0x858 rtnl_fdb_add+0x58a/0x928 rtnetlink_rcv_msg+0x5f8/0x8d8 netlink_rcv_skb+0x1f2/0x408 netlink_unicast+0x570/0x790 netlink_sendmsg+0x752/0xbe0 sock_sendmsg+0xca/0x110 ____sys_sendmsg+0x510/0x6a8 ___sys_sendmsg+0x12a/0x180 __sys_sendmsg+0xe6/0x168 __do_sys_socketcall+0x3c8/0x468 do_syscall+0x22c/0x328 __do_syscall+0x94/0xf0 system_call+0x82/0xb0 Freed by task 540: kasan_save_stack+0x40/0x68 kasan_set_track+0x36/0x48 kasan_save_free_info+0x4c/0x68 ____kasan_slab_free+0x14e/0x1a8 __kasan_slab_free+0x24/0x30 __kmem_cache_free+0x168/0x338 qeth_l2_br2dev_worker+0x154/0x6b0 process_one_work+0x76e/0x1128 worker_thread+0x184/0x1098 kthread+0x26a/0x310 __ret_from_fork+0x8a/0xe8 ret_from_fork+0xa/0x40 Last potentially related work creation: kasan_save_stack+0x40/0x68 __kasan_record_aux_stack+0xbe/0xd0 insert_work+0x56/0x2e8 __queue_work+0x4ce/0xd10 queue_work_on+0xf4/0x100 qeth_l2_switchdev_event+0x520/0x738 atomic_notifier_call_chain+0x9c/0xf8 br_switchdev_fdb_notify+0xf4/0x110 fdb_notify+0x122/0x180 fdb_add_entry.constprop.0.isra.0+0x312/0x558 br_fdb_add+0x59e/0x858 rtnl_fdb_add+0x58a/0x928 rtnetlink_rcv_msg+0x5f8/0x8d8 netlink_rcv_skb+0x1f2/0x408 netlink_unicast+0x570/0x790 netlink_sendmsg+0x752/0xbe0 sock_sendmsg+0xca/0x110 ____sys_sendmsg+0x510/0x6a8 ___sys_sendmsg+0x12a/0x180 __sys_sendmsg+0xe6/0x168 __do_sys_socketcall+0x3c8/0x468 do_syscall+0x22c/0x328 __do_syscall+0x94/0xf0 system_call+0x82/0xb0 Second to last potentially related work creation: kasan_save_stack+0x40/0x68 __kasan_record_aux_stack+0xbe/0xd0 kvfree_call_rcu+0xb2/0x760 kernfs_unlink_open_file+0x348/0x430 kernfs_fop_release+0xc2/0x320 __fput+0x1ae/0x768 task_work_run+0x1bc/0x298 exit_to_user_mode_prepare+0x1a0/0x1a8 __do_syscall+0x94/0xf0 system_call+0x82/0xb0 The buggy address belongs to the object at 00000000fdcea400 which belongs to the cache kmalloc-96 of size 96 The buggy address is located 64 bytes inside of 96-byte region [00000000fdcea400, 00000000fdcea460) The buggy address belongs to the physical page: page:000000005a9c26e8 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0xfdcea flags: 0x3ffff00000000200(slab|node=0|zone=1|lastcpupid=0x1ffff) raw: 3ffff00000000200 0000000000000000 0000000100000122 000000008008cc00 raw: 0000000000000000 0020004100000000 ffffffff00000001 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: 00000000fdcea300: fb fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc 00000000fdcea380: fb fb fb fb fb fb f ---truncated---

Published Oct 21, 2024 · Updated May 11, 2026

Unknown · CVSS Not scored

CVE-2022-48953: rtc: cmos: Fix event handler registration ordering issue

In the Linux kernel, the following vulnerability has been resolved: rtc: cmos: Fix event handler registration ordering issue Because acpi_install_fixed_event_handler() enables the event automatically on success, it is incorrect to call it before the handler routine passed to it is ready to handle events. Unfortunately, the rtc-cmos driver does exactly the incorrect thing by calling cmos_wake_setup(), which passes rtc_handler() to acpi_install_fixed_event_handler(), before cmos_do_probe(), because rtc_handler() uses dev_get_drvdata() to get to the cmos object pointer and the driver data pointer is only populated in cmos_do_probe(). This leads to a NULL pointer dereference in rtc_handler() on boot if the RTC fixed event happens to be active at the init time. To address this issue, change the initialization ordering of the driver so that cmos_wake_setup() is always called after a successful cmos_do_probe() call. While at it, change cmos_pnp_probe() to call cmos_do_probe() after the initial if () statement used for computing the IRQ argument to be passed to cmos_do_probe() which is cleaner than calling it in each branch of that if () (local variable "irq" can be of type int, because it is passed to that function as an argument of type int). Note that commit 6492fed7d8c9 ("rtc: rtc-cmos: Do not check ACPI_FADT_LOW_POWER_S0") caused this issue to affect a larger number of systems, because previously it only affected systems with ACPI_FADT_LOW_POWER_S0 set, but it is present regardless of that commit.

Published Oct 21, 2024 · Updated May 11, 2026

Unknown · CVSS Not scored

CVE-2022-48952: PCI: mt7621: Add sentinel to quirks table

In the Linux kernel, the following vulnerability has been resolved: PCI: mt7621: Add sentinel to quirks table Current driver is missing a sentinel in the struct soc_device_attribute array, which causes an oops when assessed by the soc_device_match(mt7621_pcie_quirks_match) call. This was only exposed once the CONFIG_SOC_MT7621 mt7621 soc_dev_attr was fixed to register the SOC as a device, in: commit 7c18b64bba3b ("mips: ralink: mt7621: do not use kzalloc too early") Fix it by adding the required sentinel.

Published Oct 21, 2024 · Updated May 11, 2026

Unknown · CVSS Not scored

CVE-2022-48951: ASoC: ops: Check bounds for second channel in snd_soc_put_volsw_sx()

In the Linux kernel, the following vulnerability has been resolved: ASoC: ops: Check bounds for second channel in snd_soc_put_volsw_sx() The bounds checks in snd_soc_put_volsw_sx() are only being applied to the first channel, meaning it is possible to write out of bounds values to the second channel in stereo controls. Add appropriate checks.

Published Oct 21, 2024 · Updated May 11, 2026

Unknown · CVSS Not scored

CVE-2022-48950: perf: Fix perf_pending_task() UaF

In the Linux kernel, the following vulnerability has been resolved: perf: Fix perf_pending_task() UaF Per syzbot it is possible for perf_pending_task() to run after the event is free()'d. There are two related but distinct cases: - the task_work was already queued before destroying the event; - destroying the event itself queues the task_work. The first cannot be solved using task_work_cancel() since perf_release() itself might be called from a task_work (____fput), which means the current->task_works list is already empty and task_work_cancel() won't be able to find the perf_pending_task() entry. The simplest alternative is extending the perf_event lifetime to cover the task_work. The second is just silly, queueing a task_work while you know the event is going away makes no sense and is easily avoided by re-arranging how the event is marked STATE_DEAD and ensuring it goes through STATE_OFF on the way down.

Published Oct 21, 2024 · Updated May 11, 2026

Unknown · CVSS Not scored

CVE-2022-48949: igb: Initialize mailbox message for VF reset

In the Linux kernel, the following vulnerability has been resolved: igb: Initialize mailbox message for VF reset When a MAC address is not assigned to the VF, that portion of the message sent to the VF is not set. The memory, however, is allocated from the stack meaning that information may be leaked to the VM. Initialize the message buffer to 0 so that no information is passed to the VM in this case.

Published Oct 21, 2024 · Updated May 11, 2026

Unknown · CVSS Not scored

CVE-2022-48948: usb: gadget: uvc: Prevent buffer overflow in setup handler

In the Linux kernel, the following vulnerability has been resolved: usb: gadget: uvc: Prevent buffer overflow in setup handler Setup function uvc_function_setup permits control transfer requests with up to 64 bytes of payload (UVC_MAX_REQUEST_SIZE), data stage handler for OUT transfer uses memcpy to copy req->actual bytes to uvc_event->data.data array of size 60. This may result in an overflow of 4 bytes.

Published Oct 21, 2024 · Updated May 11, 2026

Unknown · CVSS Not scored

CVE-2022-48947: Bluetooth: L2CAP: Fix u8 overflow

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: L2CAP: Fix u8 overflow By keep sending L2CAP_CONF_REQ packets, chan->num_conf_rsp increases multiple times and eventually it will wrap around the maximum number (i.e., 255). This patch prevents this by adding a boundary check with L2CAP_MAX_CONF_RSP Btmon log: Bluetooth monitor ver 5.64 = Note: Linux version 6.1.0-rc2 (x86_64) 0.264594 = Note: Bluetooth subsystem version 2.22 0.264636 @ MGMT Open: btmon (privileged) version 1.22 {0x0001} 0.272191 = New Index: 00:00:00:00:00:00 (Primary,Virtual,hci0) [hci0] 13.877604 @ RAW Open: 9496 (privileged) version 2.22 {0x0002} 13.890741 = Open Index: 00:00:00:00:00:00 [hci0] 13.900426 (...) > ACL Data RX: Handle 200 flags 0x00 dlen 1033 #32 [hci0] 14.273106 invalid packet size (12 != 1033) 08 00 01 00 02 01 04 00 01 10 ff ff ............ > ACL Data RX: Handle 200 flags 0x00 dlen 1547 #33 [hci0] 14.273561 invalid packet size (14 != 1547) 0a 00 01 00 04 01 06 00 40 00 00 00 00 00 ........@..... > ACL Data RX: Handle 200 flags 0x00 dlen 2061 #34 [hci0] 14.274390 invalid packet size (16 != 2061) 0c 00 01 00 04 01 08 00 40 00 00 00 00 00 00 04 ........@....... > ACL Data RX: Handle 200 flags 0x00 dlen 2061 #35 [hci0] 14.274932 invalid packet size (16 != 2061) 0c 00 01 00 04 01 08 00 40 00 00 00 07 00 03 00 ........@....... = bluetoothd: Bluetooth daemon 5.43 14.401828 > ACL Data RX: Handle 200 flags 0x00 dlen 1033 #36 [hci0] 14.275753 invalid packet size (12 != 1033) 08 00 01 00 04 01 04 00 40 00 00 00 ........@...

Published Oct 21, 2024 · Updated May 11, 2026

Unknown · CVSS Not scored

CVE-2022-48946: udf: Fix preallocation discarding at indirect extent boundary

In the Linux kernel, the following vulnerability has been resolved: udf: Fix preallocation discarding at indirect extent boundary When preallocation extent is the first one in the extent block, the code would corrupt extent tree header instead. Fix the problem and use udf_delete_aext() for deleting extent to avoid some code duplication.

Published Oct 21, 2024 · Updated May 11, 2026