CVE-2026-64582: RDMA/rxe: Fix a use-after-free problem in rxe_mmap
In the Linux kernel, the following vulnerability has been resolved:
RDMA/rxe: Fix a use-after-free problem in rxe_mmap
rxe_mmap() removes a rxe_mmap_info struct from the pending_mmaps list
and releases pending_lock while the struct's kref is still at 1:
list_del_init(&ip->pending_mmaps);
spin_unlock_bh(&rxe->pending_lock); /* ref == 1, no lock held */
ret = remap_vmalloc_range(vma, ip->obj, 0); /* walks PTEs */
[...]
rxe_vma_open(vma); /* kref_get, ref → 2 */
remap_vmalloc_range_partial() walks PTEs without any lock.
A concurrent DESTROY_CQ ioctl on another CPU calls:
kref_put(&q->ip->ref, rxe_mmap_release) /* ref 1→0 */
vfree(ip->obj) /* clears vmalloc PTEs mid-walk */
kfree(ip) /* frees rxe_mmap_info */
This yields:
1. Kernel crash, vmalloc_to_page() returns NULL when vfree wins the
per-PTE race -> vm_insert_page(NULL) → GPF in validate_page_before_insert
2. Page UAF, vmalloc_to_page() reads a stale PTE before vfree clears
it. User VMA holds a PTE to a free'd page which might eventually get
reallocated later by vmalloc which allows the attacker to get a clean
page-level UAF.
It is worth noting that even though a page-level UAF is possible given
the strong primitive, it is statistically very difficult to achieve
given the very short time window (after the last insert_page and before
the kref_get).
The call trace are as below:
Oops: general protection fault, probably for non-canonical address 0xdffffc0000000001: 0000 [#1] SMP KASAN NOPTI
KASAN: null-ptr-deref in range [0x0000000000000008-0x000000000000000f]
CPU: 0 UID: 1000 PID: 413 Comm: poc Not tainted 7.0.0-rc5-dirty #28 PREEMPT(lazy)
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014
RIP: 0010:validate_page_before_insert+0x32/0x300
Code: e5 41 57 41 56 49 89 fe 41 55 41 54 53 48 89 f3 e8 93 b5 a3 ff 48 8d 7b 08 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 7b 02 00 00 4c 8b 63 08 31 ff 4d 89 e5 41 83 e5
RSP: 0018:ffff88811b15f2f0 EFLAGS: 00000202
RAX: dffffc0000000000 RBX: 0000000000000000 RCX: 0000000000000000
RDX: 0000000000000001 RSI: 0000000000000000 RDI: 0000000000000008
RBP: ffff88811b15f318 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000000 R12: ffff8881181eee00
R13: 0000000000000000 R14: ffff8881181eee00 R15: ffff8881181eee20
FS: 00007b1e000f76c0(0000) GS:ffff8884268e0000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007b1e00a24ac0 CR3: 0000000116eb3000 CR4: 00000000000006f0
Call Trace:
<TASK>
insert_page+0x8f/0x190
? __pfx_insert_page+0x10/0x10
? kasan_save_alloc_info+0x38/0x60
vm_insert_page+0x2e7/0x400
remap_vmalloc_range_partial+0x212/0x3e0
remap_vmalloc_range+0x6e/0xb0
? __kasan_check_write+0x14/0x30
rxe_mmap+0x2e9/0x5d0
ib_uverbs_mmap+0x1ad/0x2c0
__mmap_region+0x12c2/0x2ad0
? __pfx___mmap_region+0x10/0x10
? __sanitizer_cov_trace_switch+0x58/0xb0
? mas_prev_slot+0x360/0x39c0
? __sanitizer_cov_trace_switch+0x58/0xb0
? mas_next_slot+0x1e5b/0x2f40
? __sanitizer_cov_trace_cmp8+0x18/0x30
? unmapped_area_topdown+0x4dd/0x610
? kfree+0x1b1/0x440
? free_cpumask_var+0x16/0x30
? __kasan_slab_free+0x7d/0xa0
? __sanitizer_cov_trace_cmp8+0x18/0x30
mmap_region+0x2e6/0x3c0
do_mmap+0xa3e/0x12a0
? __pfx_do_mmap+0x10/0x10
? __kasan_check_write+0x14/0x30
? down_write_killable+0xba/0x160
? __pfx_down_write_killable+0x10/0x10
? __sanitizer_cov_trace_cmp4+0x16/0x30
vm_mmap_pgoff+0x2d4/0x4a0
? __pfx_vm_mmap_pgoff+0x10/0x10
? fget+0x1bf/0x270
ksys_mmap_pgoff+0x40c/0x690
? __sanitizer_cov_trace_const_cmp4+0x16/0x30
? __pfx_ksys_mmap_pgoff+0x10/0x10
? __kasan_check_write+0x14/0x30
? _raw_spin_trylock+0xbb/0x130
? __pfx__raw_spin_trylock+0x10/0x10
__x64_sys_mmap+0x135/0x1e0
x64_sys_c
---truncated---
These mappings and lookup hints may be relevant to the vulnerability behavior, CWE, affected product, or exposure path. Glexia-inferred context is not an official MITRE, ATT&CK, CWE, or CVE Program mapping.
ATT&CK lookup starting points
Use these exact CWE pages and searches to review the Glexia ATT&CK library from this CVE's weakness and description context.
cwe · low confidence lookup
CWE-416: Exact CWE lookup
Use the exact CWE identifier as the starting point before reviewing related ATT&CK behavior. Open the exact CWE lookup page first, then review the ATT&CK searches from that MITRE weakness context. This is a Glexia lookup hint, not an official ATT&CK mapping.
These fields come from the CVE record and ADP containers, not from Glexia's Take. They preserve time-varying source decisions such as CISA SSVC, KEV status, CVSS metrics, and provider references.
1CVSS vectors
3Timeline events
1ADP providers
9Source links
SSVC decision data
CISA-ADPCISA Coordinator
Timestamp
Version
2.0.3
Exploitation: noneAutomatable: noTechnical Impact: total
CVSS vector scores
1 official score
We collect every scored CVSS vector available in the official CNA and ADP containers. When more than one version is present, the table keeps the source vectors side by side instead of collapsing them into the highest score.
CWE links open Glexia weakness intelligence pages with official CWE context, developer remediation guidance, and related CVE mappings.
CWE-416 · source CWE mapping
Use After Free
Use After Free represents a recurring weakness pattern that can create exploitable paths when design, validation, or implementation controls are missing.